Scribd Logo
Upload

Welcome to Scribd!

  • 667 views

    Teromatec Eo 8355: Description Procedure of Use

    Uploaded by

    Aravind raj
    This document provides information on the self shielded, peripheric continuous electrode called TeroMatec EO 8355. It is specifically developed for outdoor maintenance and repair welding of thick, heavy components. It allows for faster deposition rates compared to traditional coated electrodes. It has excellent resistance to grinding abrasion with compression and medium impact. It also has dual pass capability and ready formation of stress relieving cracks to minimise distortion.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Teromatec Eo 8355: Description Procedure of Use

    Uploaded by

    Aravind raj
    667 views1 page
    This document provides information on the self shielded, peripheric continuous electrode called TeroMatec EO 8355. It is specifically developed for outdoor maintenance and repair welding of thick, heavy components. It allows for faster deposition rates compared to traditional coated electrodes. It has excellent resistance to grinding abrasion with compression and medium impact. It also has dual pass capability and ready formation of stress relieving cracks to minimise distortion.

    Original Description:

    Castolin product for Rollers

    Original Title

    8355EO en

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides information on the self shielded, peripheric continuous electrode called TeroMatec EO 8355. It is specifically developed for outdoor maintenance and repair welding of thick, heavy components. It allows for faster deposition rates compared to traditional coated electrodes. It has excellent resistance to grinding abrasion with compression and medium impact. It also has dual pass capability and ready formation of stress relieving cracks to minimise distortion.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    667 views1 page

    Teromatec Eo 8355: Description Procedure of Use

    Uploaded by

    Aravind raj
    This document provides information on the self shielded, peripheric continuous electrode called TeroMatec EO 8355. It is specifically developed for outdoor maintenance and repair welding of thick, heavy components. It allows for faster deposition rates compared to traditional coated electrodes. It has excellent resistance to grinding abrasion with compression and medium impact. It also has dual pass capability and ready formation of stress relieving cracks to minimise distortion.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    Self shielded, peripheric continuous electrode

    TeroMatec EO 8355
    For semi-automatic and robotic welding

    Description Procedure of use


    Special, self shielded, flux cored alloy wire Preparation
    specifically developed for outdoor maintenance and Remove any previous weld deposits or cracked metal
    repair welding of thick, heavy components where with ChamferTrode 03 (DC) or 04 (AC).
    faster weld deposition rates over traditional coated Preheating
    electrodes, are required. Worn or new critical parts Preheating depends on the steel's Carbon
    may be cost effectively Terocote protected either Equivalent, and the workpiece size, thickness and
    manually or fully automatically to extend their useful geometry. E+C recommends:
    service life and increase productivity and profitability. CE < 0.2 : preheat not essential
    High chromium, hypereutectic cast iron alloy for CE 0.2 - 0.4 : preheat 100-200°C
    wear-protective coating on low or high alloy steels CE 0.4 - 0.8 : preheat 200-350°C.
    and 14% Mn steels. Note that 12-14% Mn steels should never be
    Excellent resistance to grinding abrasion with preheated and the workpiece temperature during
    compression and medium impact. welding should be kept below 250°C to avoid
    Dual pass capability. embrittlement.
    Ready formation of stress relieving cracks to
    Intermediate layer
    minimise distortion.
    Slag free deposits save weld cleaning time. On 12-14% Mn steels, deposit intermediate layers
    with TeroMatec 3205 or with the manual electrode
    Deposits are smooth, flat, grindable and rust EutecTrode 6450.
    resistant. On hardenable and air-hardening steels, deposit
    Resistant to flame cutting - use plasma arc process. intermediate layers with Xuper 686. To build up
    Ideal choice for field work or on site applications missing sections on low-alloy steels, TeroMatec 3110
    No need for costly gas cylinders, regulators or flow is recommended.
    meters.
    Core deoxidisers tolerate air currents or draught Welding parameters
    effects. Welding current: = (+)
    Relatively thick, wide overlays possible in single Procedure A
    pass. No enforced stop - starts increase welding duty For thick sections and high deposition rates.
    cycles. Superior electrode efficiency due to low flux to ∅ (mm) Amperage (A)
    metal ratio. No stub end losses promotes material 2,8 ~350
    cost savings. Variable electrode stick out capability
    improves control over heat input, dilution, deposition Procedure B
    rate, visibility and access in tight spaces. For thin sections, minimum dilution and low heat
    input.
    ∅ (mm) Amperage (A)
    Technical data
    2,8 ~220
    Hardness: ...................... 57-60 HRC
    Welding technique
    After striking, maintain the wire stick-out around 40
    Applications mm with an arc length approx. 7 mm. Longer wire
    For wear-preventive protective coating of a wide stick-out will further increase deposition rates. For
    range of steel components subject to severe abrasion optimum deposit quality, use drag stringer bead or
    or erosion by mineral particles, sand, rocks, gravel moderate weaving techniques to minimise
    etc.processed in the Quarry, Earthmoving, Dredging, overheating risks. Stop welding by rapidly lifting the
    Sand/ Gravel, Coal/ Coke and Cement industries. torch away from the work piece.

    You might also like