0% found this document useful (0 votes)
119 views1 page

Peak 3A, Low Dropout Regulator With Enable: Features General Description

The document describes the G966A, a high performance positive voltage regulator designed for applications requiring very low input voltage down to 1.4V and low dropout voltage up to 2A. It has an adjustable output voltage down to 0.8V, enable pin to reduce power dissipation, and over current and temperature protection. The regulator provides excellent regulation over variations in line, load and temperature, and indicates when the output voltage reaches 92% of its rating with a power OK signal. It is available in an 8-pin SOP package.

Uploaded by

Losa Fernandez
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
119 views1 page

Peak 3A, Low Dropout Regulator With Enable: Features General Description

The document describes the G966A, a high performance positive voltage regulator designed for applications requiring very low input voltage down to 1.4V and low dropout voltage up to 2A. It has an adjustable output voltage down to 0.8V, enable pin to reduce power dissipation, and over current and temperature protection. The regulator provides excellent regulation over variations in line, load and temperature, and indicates when the output voltage reaches 92% of its rating with a power OK signal. It is available in an 8-pin SOP package.

Uploaded by

Losa Fernandez
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Global Mixed-mode Technology G966A

Peak 3A, Low Dropout Regulator with Enable


Features General Description
„ Adjustable Output Low to 0.8V The G966A is a high performance positive voltage
„ Input Voltage as Low as 1.4V and VPP Voltage regulator designed for use in applications requiring
5V very low Input voltage and very low dropout voltage at
„ 300mV Dropout @ 2A, VO 2.5V up to 2 amps. It operates with a VIN as low as 1.4V and
„ Over Current and Over Temperature Protection VPP voltage 5V with output voltage programmable as
„ Enable Pin
low as 0.8V. The G966A features ultra low dropout,
„ Low Reverse Leakage (Output to Input )
ideal for applications where VOUT is very close to VIN.
„ Power SOP-8 (FD) Packages with Thermal Pad
Additionally, the G966A has an enable pin to further
„ ±2% Output Voltage
„ VO Power OK Signal reduce power dissipation while shutdown. The G966A
„ 2.5V Options by Setting ADJ Pin Below 0.2V provides excellent regulation over variations in line,
and Adjustable Externally Using Resistors load and temperature. The G966A provides a power
„ VO Pull Low Resistance when Disable OK signal to indicate if the voltage level of VO reaches
„ VO Soft Start When Enable 92% of its rating value.
The G966A is available in the power SOP-8 (FD)
Applications package. It is available with 2.5V internally preset
„ Motherboards outputs that are also adjustable using external resis-
„ Peripheral Cards tors.
„ Network Cards
„ Set Top Boxes
„ Notebook Computers

Ordering Information
ORDER TEMP. PACKAGE
MARKING
NUMBER RANGE (Pb free/Green)
G966A-25ADJF11U 966A-25 -40°C~+85°C SOP-8 (FD)
Note: F1: SOP-8 (FD)
1:Bonding Code
U : Tape & Reel
e.g. 25 denotes the 2.5V output voltage

Pin Configuration Typical Application Circuit

G966A
10kΩ
G966A VPP (5V) VPP POK VIN

POK 1 8 GND VEN


VIN VIN
VEN 2 7 ADJ GND
VO VO
Thermal
3 Pad 6 VO ADJ
VIN R1

VPP 4 5 NC CPP C1 C2
1µF 10µF 10µF
SOP-8 (FD) R2

0.8 (R1+R2)
VO = Volts
R2
R2<120kΩ is recommended

Ver: 0.8 TEL: 886-3-5788833


Mar 07, 2012 http://www.gmt.com.tw
1

You might also like