Scribd
Upload
321 views6 pages

Prodrive 40/80: Configuration Guide

This document provides configuration guidelines for various Quantum ProDrive hard drives, including CMOS settings and jumper settings. It notes that write pre-compensation is not required for these drives and the BIOS setting should reflect this by using the value 65535. The jumper settings are the same across models: single drive uses DS only jumpers, master drive uses DS only jumpers, and slave drive uses no jumpers.

Uploaded by

carlos duran
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
321 views6 pages

Prodrive 40/80: Configuration Guide

This document provides configuration guidelines for various Quantum ProDrive hard drives, including CMOS settings and jumper settings. It notes that write pre-compensation is not required for these drives and the BIOS setting should reflect this by using the value 65535. The jumper settings are the same across models: single drive uses DS only jumpers, master drive uses DS only jumpers, and slave drive uses no jumpers.

Uploaded by

carlos duran
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 6

ProDrive 40/80

Jumper Settings

Configuration Guide

CMOS Values

Capacity 40MB 80MB


Cylinders 965 965
Heads 5 10
Sectors 17 17
Write Precomp 65535 65535
Landing Zone 965 965

Note on Write Pre-compensation:

The Quantum ProDrive series drive does not require write pre-compensation, your CMOS setting should be set
to reflect that this feature is not enabled. If the setting of 'none' is not present, the value 65535 is a number
that the BIOS will accept to disable this feature.

Jumper Settings

Single Drive DS only


Master Drive DS only
Slave Drive No jumpers

1 of 1
ProDrive 52/80/105
Jumper Settings

Configuration Guide

CMOS Values

Capacity 52MB 85MB 105MB


Cylinders 751 611 755
Heads 8 16 16
Sectors 17 17 17
Write Precomp 65535 65535 65535
Landing Zone 751 611 755

Note on Write Pre-compensation:

The Quantum LPS series drive does not require write pre-compensation, your CMOS setting should
be set to reflect that this feature is not enabled. If the setting of 'none' is not present, the value
65535 is a number that the BIOS will accept to disable this feature.

Jumper Settings

Single Drive DS only


Master Drive DS only
Slave Drive No jumpers

1 of 1
ProDrive 425
ATA Jumper Settings

Configuration Guide

CMOS Values

Capacity 425MB
Cylinders 1021
Heads 16
Sectors 51
Write Precomp 65535
Landing Zone 1021

Note on Write Pre-compensation:

The Quantum 425AT series drive does not require write pre-compensation, your CMOS setting should
be set to reflect that this feature is not enabled. If the setting of 'none' is not present, the value
65535 is a number that the BIOS will accept to disable this feature.

Jumper Settings

Single Drive DS only


Master Drive DS only
Slave Drive No jumpers

1 of 1
ProDrive ELS
Jumper Settings

Configuration Guide

CMOS Values

Capacity 42MB 85MB 127MB 170MB


Cylinders 968 977 919 1011
Heads 5 10 16 15
Sectors 17 17 17 22
Write Precomp 65535 65535 65535 65535
Landing Zone 968 977 919 1011

Note on Write Pre-compensation:

The Quantum ELS series drive does not require write pre-compensation, your CMOS setting should
be set to reflect that this feature is not enabled. If the setting of 'none' is not present, the value
65535 is a number that the BIOS will accept to disable this feature.

Jumper Settings

Single Drive DS only


Master Drive DS only
Slave Drive No jumpers

1 of 1
ProDrive LPS 120/140
Jumper Settings

Configuration Guide

CMOS Values

Capacity 120MB 240MB


Cylinders 901 723
Heads 5 13
Sectors 53 51
Write Precomp 65535 65535
Landing Zone 901 723

Note on Write Pre-compensation:

The Quantum ProDrive LPS series drive does not require write pre-compensation, your CMOS setting
should be set to reflect that this feature is not enabled. If the setting of 'none' is not present, the
value 65535 is a number that the BIOS will accept to disable this feature.

Jumper Settings

Single Drive DS only


Master Drive DS only
Slave Drive No jumpers

1 of 1
ProDrive LPS 525
Jumper Settings

Configuration Guide

CMOS Values

Capacity 525MB
Cylinders 1017
Heads 16
Sectors 63
Write Precomp 65535
Landing Zone 1017

Note on Write Pre-compensation

The Quantum 525AT series drive does not require write pre-compensation, your CMOS setting should
be set to reflect that this feature is not enabled. If the setting of 'none' is not present, the value
65535 is a number that the BIOS will accept to disable this feature.

Jumper Settings

Single Drive DS only


Master Drive DS only
Slave Drive No jumpers

1 of 1

You might also like