Vertical & Horizontal Multistage Pumps - MV & MH Series 60Hz

C.R.I. PUMPS

T H E B E G I N N I N G
of C.R.I., way back in 1961, was a resolute attempt to produce a few
irrigation equipments using the limited facilities of an in-house foundry.
Eventually the founder's dream was coming true as the small
production unit he started kept growing rapidly. Now, after more than
five eventful decades, it is an enormous, widely reputed organization,
which produces more than 1800 varieties of perfectly engineered
pumps and motors and sells its products in numerous countries spread
across 6 continents.

C . R . I . I S O N E A M O N G
the few pioneers in the world to produce 100% stainless steel
submersible pumps. Having achieved a record production capacity of
over 2 million pumps per annum, today C.R.I. is rubbing its shoulders
with the best brands in the world, with advanced technology and safety
standards as its hallmarks.

THE INFRASTRUCTURE
of C.R.I. is pretty comprehensive with state-of-the-art machineries
and high potential in-house R&D recognised by the ministry of
science and technology, Govt. of India - all within its own covered area
of 300,000 square metres. The production environment is accredited
with ISO 9001 & 14001 certifications and the products are CE, UR/UL,
IEC, TSE & ISI certified. The R&D team always stays in tune with the
changing scenario and seldom fails in coming up with outstanding
solutions every time.

N E E D L E S S T O S A Y ,
behind this legendary growth lies the untiring, innovative,
enthusiastic and dedicated team work. and, of course, a flawlessly
maintained value system too. The name C.R.I. itself encapsulates the
company's ethos: ‘‘ Commitment, Reliability, Innovation’’.
 HORIZONTAL MULTISTAGE PUMPS
MH SERIES - 60 Hz

34
HORIZONTAL MULTISTAGE PUMPS
MH Series

C.R.I. Horizontal Multistage MH series pump is non-self priming, axial suction

and vertical radial delivery type with threaded ports. All wetted components

like impellers, diffusers and shaft of these pumps are made of corrosion

resistant AISI stainless steel and designed to deliver the best possible

hydraulic efficiency. The pump and motor are connected with a single drive

shaft to eliminate any transmission loss. As the shaft, Impeller, diffusers and

other vital components of the pump are made up of high grade stainless

Steel AISI 304/316, these pumps can be used to pump high aggressive water

and quite hygienic to use in drinking water systems too. Wear resistant

bearings ensure better hydraulic efficiency and noiseless operation and the

pump casing & brackets are made of high quality cast iron. 'O' rings and

gaskets prevent leakage at the intermediate casing during high pressure.

Mechanical seals of these pumps are made of ceramic and carbon graphite

to ensure reliability and easy replacement. These pumps are reliable, easy to

install and designed for high end user comfort.

C.R.I. Horizontal Multistage centrifugal pumps are powered by a Totally Enclosed Fan Cooled, A.C. induction motor, suitable for continuous duty. Motor

stator is made of low watt loss steel laminations assembled under pressure and rigidly locked in the frame. Dynamically balanced rotor ensures vibration

and noise free operation and the varnished impregnated windings made of enameled copper wire offer excellent resistance.

Shaft of ample size made of quality steel and precisely ground is used for transmitting the rated Horsepower. Construction of motor frames and usage

of quality materials result in high performance and low temperature rise thereby increasing the life cycle of the motor. Thermal over load protector

(motor protector) is incorporated in single phase motors. These pumps require an adequate motor protection control panel.

Features : | High Operating efficiency | Precise parts for hygiene | Good suction lift and operating pressure | Dynamically balanced rotating parts

| Balanced and rigid construction | Available M.O.C. Type S, L & N | Inbuilt thermal overload protector in all single phase pumps.

Applications : | Residential & Industrial Pressure Boosting | Small farms | Washing systems | Industrial water supply | HVAC | Reverse

Osmosis systems | Food processing industries | Golf course.

MODEL IDENTIFICATION CODE

M X X - XXX - XX X - (H)

This digit is applicable only

for high head models
Multistage Centrifugal
1 = Single Phase - PSC
2 = Single Phase - CSCR
Type / Pole 3 = Three Phase - DOL
H - Horizontal / 2 pole 6 = Three Phase - SD

No of Impellers

Type of Materials of Nominal Flow

Construction (M.O.C) (in US-gpm)
Ex. 26 - 26 gpm
Impeller / Diffuser / Pump Casing & Bracket / Pump Base
S = AISI 304 / AISI 304 / Cast Iron / M.S
L = AISI 304 / AISI 304 / Cast Steel 304 / M.S
N = AISI 316 / AISI 316 / Cast Steel 316 / M.S

MH SERIES - 60 Hz 35
 TECHNICAL DATA MATERIALS OF CONSTRUCTION

Power Range : 0.40 HP to 4.0 HP Pump Casing & Bracket S.S. 304 / Cast Iron

Speed : 3450 rpm Impeller S.S. 304

Degree of protection : IP 54 / IP 55 Diffuser S.S. 304

Insulation class :B/F Motor Frame Aluminum

Versions : Single Phase 220 / 230V, Shaft S.S. 410

60Hz, A.C. Supply (Permanent
Split Capacitor-PSC) Sealing Mechanical Seal
Incorporated with thermal protector.
Base Plate Mild Steel
Three Phase 220 / 380 / 460V 60Hz

Sealing : Mechanical seal

Direction of rotation : Counter clockwise viewed from

driving end

Type of Duty : S1 (continuous)

Nom. Suc. x Del. Size : 1" x 1" ; 1½" x 1¼"

CHARACTERISTICS OF PUMPED LIQUIDS OPERATING LIMITS

a) Temperature 194OF (max.) Maximum Liquid Temperature : 194 O F

b) Permissible amount of sand 42 lb / 1000 gal (max.) Maximum Ambient Temperature : 104 O F

c) Chlorine ion density 500 ppm (max.) Maximum Operating Pressure : 0.55 Mpa (5.5 bar)

d) Allowable solids 3000 ppm (max.)

Max. Operating
e) Specific gravity 1.004 (max.) 1 mpa (10bar) 0.6 mpa (6bar)
Pressure
f) Hardness (Drinking water) 300 (max.) MH-13 & 26 32°F to 104°F 105°F to 194°F

g) Viscosity 1.75 x 10-6m2 / Sec. (max.) MH-40 & 60 32°F to 131°F 131°F to 194°F

h) Turbidity 50 ppm silica scale (max.)

Min. Inlet pressure : As per NPSH Curve + Safety Margin 1metre.
i) pH 6.5 to 8.5
Max. Inlet pressure : Limited by max. operating pressure.

PERFORMANCE CURVE CONDITIONS

The conditions below apply to the curves shown on the following pages.

Curve tolerance are according to ISO 9906, Grade 3B.

The performance are taken at rated voltage & speed that are only indicative.

Actual discharge depends on availability of water in well / tank, height of water column from the suction pipe end.

The measurements were made with airless water at 68OF. When pumping liquids with a density higher than of water, motors with correspondingly
higher outputs must be used.

The bold curves indicate the recommended performance range.

Pipe fiction losses have not been included in the performance curves & performance tables.

36
HORIZONTAL MULTISTAGE PUMPS
 EXPLODED VIEW

MH - 13 & 26 gpm

32.11

32.07
13.05
32.09

19.00
18.12

32.19
32.11

18.03

19.00
32.09

32.19
18.12
18.04

18.03

19.00

32.19
18.12

18.03
32.12

19.00
16.00

13.05
18.18 28.00
13.05 25.01
32.19 32.12 28.04
32.18
32.23 13.00
32.14 28.03
28.01
32.07 32.23
32.19
23.00
24.03 32.14
32.00 32.07
27.02 Part Name Part No.
24.00 27.00
24.01 Rotor 13.00
32.18 Sleeve 13.05
32.14
32.12 Mechanical Seal 16.00
27.01 Wearing Ring 17.01
Chamber 18.03
Casing cover 18.04
Wearing Ring Retainer 18.10
Spacer 18.12
MH - 40 & 60 gpm Chamber-Delivery 18.18
Impeller 19.00
32.11 18.04
Rear Cover 23.00
17.01
18.10

Motor Frame 24.00

32.19

32.11
32.07

Wound Stator 24.01

13.05

Base Plate 24.03

19.00

32.00 Deflector 25.01

18.03

Bracket 25.03
17.01
18.10

Cooling Fan Cover 27.00

32.19

Cooling Fan 27.02

19.00

Terminal Box Top 28.00

25.03
18.12
13.05

32.14 Terminal Box Bottom 28.01

16.00

32.12
32.07 Wiring Gland 28.03
32.15 28.00
Capacitor 28.04
18.18 32.12 28.04 Bolt 32.00
28.03 Nut 32.07
28.01 "O" Ring 32.09
24.03 25.01
32.19 32.23 Cooling Fan Split Pin 32.10
32.18 23.00
32.14 Drain Plug 32.11
32.12
13.00 32.07 Screw 32.12
27.02 Spring Washer 32.14
27.00 Stud 32.15
24.00 32.18
24.01 32.17 Wave Washer 32.17
32.14 Bearing 32.18
27.01 Gasket 32.19
32.10 Tie Rod 32.23

MH SERIES - 60 Hz 37
 MHS-13 MHS-26

240
H - (m)

H - (ft)

60 Hz 50
70

H - (m)

H - (feet)
230 MH 3450rpm 160
S-1 MH 60 Hz
220 MH 3-0 S-2 3450rpm
S-1 6 6/0
65 3-0 150 4
210 5 45

200 140
60
190
40 130
55 180

170
120 MH
S-2
50 35 6/0
160 110
3
MH
S-1
45 150 3-0
4 100
140 30

40 130 MHS 90
-13-0
3
120 25
35 80 MH
S-2
110 6/0
2
70
30 100
20
90 60
25 MHS
80 -13-0
2
15 50
70
20
60 40

15 50 10
30
40
10 33 20
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 5 0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40
Q - (US gpm) Q - (US gpm)
Q - (m³/h) Q - (m³/h)
0 0.5 1 1.5 2 2.5 3 3.5 4 0 1 2 3 4 5 6 7 8 8

0 0.25 0.5 0.75 1 0 0.25 0.5 0.75 1 1.25 1.5 1.75 2 2.25 2.50
Q - (lps) Q - (lps)

PERFORMANCE TABLE DN : 1" x 1"

MOTOR DISCHARGE
PUMP POWER - P2 gpm 0 4 7 10 13 15.5
MODEL
kW HP m³/h 0 0.9 1.6 2.3 3 3.5

MHS-13-02 0.3 0.4 82 74 66 57 47 35

TOTAL MANOMETRIC

MHS-13-03 0.37 0.5 118 109 97 81 64

HEAD IN FEET

130

MHS-13-04 0.55 0.75 161 142 127 112 94 78

MHS-13-05 0.75 1 223 202 184 161 134 111

MHS-13-06 0.9 1.2 240 217 200 177 148 118

DN : 1" x 1"

MOTOR DISCHARGE
POWER - P2 gpm
PUMP 0 8 14 20 26 32 36
MODEL m³/h
kW HP 0 1.8 3.2 4.5 5.9 7.3 8.2
HEAD IN FEET

43
MANOMETRIC

MHS-26/02 0.55 0.75 79 68 60 52 31 21

TOTAL

MHS-26/03 0.75 1 123 108 97 86 75 61 49

MHS-26/04 1.1 1.5 164 148 135 120 101 84 69

Replace the 3rd digit in model name as “C” for Cast Iron pump base & pump head models and “N” for AISI 316 construction.
The given performance is same for Type - C, S, N
In view of the continuous developments the Information / Descriptions / Specifications / Illustrations are subject to change without notice.

38
HORIZONTAL MULTISTAGE PUMPS
 220
70
H - (m)

H - (m)
H - (ft)

H - (ft)
65 60 Hz 60 Hz
210 220
3450rpm 3450rpm
200 65
60 210
190
200
60
55 180
190
170 MHS-4
0/02-H 55 180 MHS-6
50 0/02-H
160 MHS
-40/ 170
02
150 50
45 160
140
150 MHS
45 -60/0
40 130 2
140
120
35 40 130
110
120
30 100 35
110
90 MHS-4
0/01 100
25 30
80
90 MHS-60/01
70
20 25
80
60
70
15 50 20
60
40
10 15 50
0 4 8 12 16 20 24 28 32 36 40 44 48 52 0 4 8 12 16 20 24 28 32 36 40 44 48 52 56 60
Q - (US gpm) Q - (US gpm)
Q - (m³/h) Q - (m³/h)
0 1 2 3 4 5 6 7 8 9 10 11 12 0 1 2 3 4 5 6 7 8 9 10 11 12 13

0 0.5 1 1.5 2 2.5 3 0 0.5 1 1.5 2 2.5 3 3.5

Q - (lps) Q - (lps)

PERFORMANCE TABLE
DN : 1½" x 1¼"

MOTOR DISCHARGE
POWER - P2 gpm 0 12 24 32 40 48
PUMP
MODEL m³/h
kW HP 0 2.7 5.5 7.3 9.1 10.9

0.75 1.0 89 81 73.5 66 56 40

HEAD IN FEET

MHS-40/01
MANOMETRIC
TOTAL

MHS-40/02 1.1 1.5 164 147 130 116 101 80

MHS-40/02-H 1.5 2.0 171 161 146 132 112 87

DN : 1½" x 1½"

MOTOR DISCHARGE
POWER - P2 gpm
PUMP 0 16 24 36 48 60
MODEL m³/h
kW HP 0 3.6 5.5 8.2 10.9 13.6

1.1 1.5 89 86 84 80 72 58
HEAD IN FEET

MHS-60/01
MANOMETRIC
TOTAL

MHS-60/02 2.2 3.0 148 137 132 121 106 88

MHS-60/02-H 3 4.0 181 171 167 157 140 115

MH SERIES - 60 Hz 39
 DIMENSIONAL & WEIGHT DETAILS

MHS - 13 & 26
L

L3

TH

CH
108 / 4.3" 138 / 5.4"
W1 L2
W L1

* All Dimensions are in mm & Inches.

DIMENSIONAL & WEIGHT

L L1 L2 L3 W W1 TH CH Approx. Weight
Model 1Ph 3Ph
mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch kg lb
MHS-13/02 335 13.2 325 12.8 70 2.8 160 6.3 99 3.9 134 5.3 130 5.1 215 8.5 90 3.5 13 29
MHS-13/03 363 14.3 343 13.5 89 3.5 160 6.3 118 4.6 134 5.3 130 5.1 215 8.5 90 3.5 14 31
MHS-13/04 362 14.3 362 14.3 108 4.3 160 6.3 137 5.4 134 5.3 130 5.1 215 8.5 90 3.5 15 33
MHS-13/05 415 16.3 400 15.7 127 5.0 160 6.3 156 6.1 134 5.3 130 5.1 215 8.5 90 3.5 16 35
MHS-13/06 409 16.1 419 16.5 146 5.7 160 6.3 175 6.9 134 5.3 130 5.1 215 8.5 90 3.5 17 37

L L1 L2 L3 W W1 TH CH Approx. Weight
Model 1Ph 3Ph
mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch kg lb
MHS-26/02 354 13.9 333 13.1 79 3.1 160 6.3 108 4.3 134 5.3 130 5.1 215 8.5 90 3.5 13 29
MHS-26/03 396 15.6 401 15.8 107 4.2 160 6.3 135 5.3 134 5.3 130 5.1 215 8.5 90 3.5 15 33
MHS-26/04 444 17.5 424 16.7 135 5.3 160 6.3 162 6.4 134 5.3 130 5.1 215 8.5 90 3.5 16 35

MHS - 40 & 60
L
L3
TH

CH

108 / 4.3" 138 / 5.4"

W1 L2
W L1

* All Dimensions are in mm & Inches.

DIMENSIONAL & WEIGHT

L L1 L2 L3 W W1 TH CH Approx. Weight
Model 1Ph 3Ph
mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch kg lb
MHS-40/01 369 14.5 349 13.7 52 2.0 160 6.3 72 2.8 181 7.1 130 5.1 238 9.8 109 4.3 17 37
MHS-40/02 409 16.1 424 16.7 82 3.2 160 6.3 102.5 4.0 181 7.1 130 5.1 238 9.8 109 4.3 21 46
MHS-40/02H 409 16.1 409 16.1 82 3.2 160 6.3 102.5 4.0 181 7.1 130 5.1 238 9.8 109 4.3 21.5 47

L L1 L2 L3 W W1 TH CH Approx. Weight
Model 1Ph 3Ph
mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch kg lb
MHS-60/01 379 14.9 394 15.5 52 2.0 160 6.3 72 2.8 181 7.1 130 5.1 238 9.4 109 4.3 19 42
MHS-60/02 424 16.7 424 16.7 82 3.2 160 6.3 102.5 4.0 181 7.1 130 5.1 238 9.4 109 4.3 21.5 47
MHS-60/02H 465 18.3 465 18.3 82 3.2 160 6.3 102.5 4.0 181 7.1 130 5.1 238 9.4 109 4.3 30 66

In view of the continuous developments the Information / Descriptions / Specifications / Illustrations are subject to change without notice.

40
HORIZONTAL MULTISTAGE PUMPS
 C.R.I. PUMPS (PVT) LIMITED
(International Division)
7/46-1, Keeranatham Road, Saravanampatty, Coimbatore - 641 035. India.
Tel : +91-422-3911610, 3911612. Fax : +91-422-3911600
e-mail : [email protected] website: www.crigroups.com

C.R.I. BOMBAS HIDRÁULICAS LTDA C.R.I. PUMPS (Shanghai) Co., Ltd.

Av. Rodrigo Fernando Grillo, 457, Jd. Manacas, Building 53 (No. 17), 588 Yindu Road, Minhang District,
CEP - 14.801-534, Araraquara - SP, Brasil. Shanghai, China. Tel : +8621-54405082,
Fone : +55-81-3093 9600, Fax +55-16-3331 5344 Fax : +8621-54405083
e-mail: [email protected] website: www.cribombas.com.br e-mail : [email protected]
Filial : Jaboatão dos Guararapes-PE. Fone : +55-16-81487012 website : www.bombascri.com.cn

C.R.I. PUMPS S.A. (PTY) LIMITED BOMBAS C.R.I. ESPAÑA, S.L.

P.O. Box 6292, Halfway House, Midrand - 1685, Johannesburg, Poligono Industrail EI.Bony Calle 31, No. 137, 46470
South Africa. Tel : +27-11-8058631 / 32 Fax : +27-11-8058630 Catarroja (Valencia) Spain.
e-mail: [email protected] website: www.cripumps.co.za Tel: +34-96 1842 974 Fax: +34-96 1842 977.
Branch : Capetown : + 27-21-931 2516 E-mail: [email protected]
Website: www.bombascri.es

C.R.I. POMPA SANAYi VE TiCARET C.R.I. PUMPS (FZE)

LiMiTED Ş iRKETi P.O. Box 7988, A4-12 SAIF-Zone, Sharjah, U.A.E.
10032 Sk. No:12 A.O.S.B. 35620 Çigli-İzmir-Türkiye. Tel : +971-6-5573041 (3 Lines),
Tel:+90-232-328 22 99 Fax:+90-232-328 23 33 Fax : +971-6-5573042
e-mail: [email protected] website: www.cripompa.com e-mail : [email protected]
EC-MP6-09/15-E2

https://www.youtube.com https://www.facebook.com
/user/cripumpsglobal /criglobal