Viessmann Heat Pump

Brine/water
heat pumps
24/25
VITOCAL 350-G
VITOCAL 300-G
Powerful heat pumps with high flow temperatures meet the requirements for
high DHW convenience in large detached houses and apartment buildings.
With its two high temperature heat pumps, the Perfect for high heating output
Vitocal 350-G and Vitocal 300-G, Viessmann The Vitocal 350-G/300-G is an economical
also meets the demand for higher heating solution for higher heat demands. It allows
outputs. Four sizes are available up to 84.6 kW. the heating flow and return lines of several
heat pumps to be linked in a cascade.
EVI for high flow temperatures
The Vitocal 350-G achieves high flow A heat pump cascade consists of one lead
temperatures of up to 70 °C. This results from heat pump and up to four lag heat pumps.
the use of an EVI (enhanced vapour injection) Both the lead heat pump and the lag heat
refrigerant circuit, where an intermediate pumps can have two stages. This not only
vapour injection cools the refrigerant so that delivers the higher heating output required,
it can be more densely compressed than is but also increases the operational reliability of Energy efficiency label
Vitocal 300-G, BW 301.A21
otherwise possible. the entire system.
The Vitocal 350-G also delivers sufficiently
high temperatures to make it suitable for The modular design, with separate
modernising apartment buildings with radiator compressor circuits, also ensures particularly
heating systems. high levels of efficiency in partial load
operation, and enables simultaneous DHW
RCD system for highest level of efficiency and central heating.
RCD stands for refrigerant cycle diagnostic
system. This provides constant monitoring of
the refrigerant circuit in Vitocal high EHPA Quality Label
temperature heat pumps and, in conjunction as proof of the COP,

for subsidy according
with the electronic expansion valve, ensures
to the German market
the highest level of efficiency at every incentive programme
operating point.
Take advantage of these benefits
Low noise and vibration emissions through sound-optimised appliance design

Low operating costs with the highest level of efficiency at every operating point through the
innovative RCD (refrigerant cycle diagnostic) system with electronic expansion valve (EEV)
Mono mode operation for DHW and central heating possible
Master/slave solutions for higher heat demands and DHW convenience, e.g. combination of
Vitocal 300-G and Vitocal 350-G
Extremely quiet operation through sound-optimised appliance design
Vitotronic 200 control unit with plain text and graphic display for weather-compensated heating
mode and natural or active cooling
Control of Viessmann ventilation units possible
Prepared for the use of power generated on site, for example by photovoltaic systems
Web-enabled via free ViCare app and Vitoconnect (optional)
Brine/water VITOCAL 350-G
heat pumps 20.5 to 42.3 kW (single stage)
41.0 to 84.6 kW (two-stage)
Vitocal 350-G
(master)
1 Vitotronic 200 control unit

2 Condenser
3 Large area evaporator for an efficient
exchange of heat
4 Hermetically sealed Compliant scroll
compressor with EVI (enhanced vapour
injection) process
26/27
The powerful Vitocal 350-G brine/water heat Furthermore, the Vitotronic 200 is capable
pump is one of the quietest heat generators of of communicating, and via the Vitocom 300
its kind, thanks to its low-vibration design. module, allows the heat pump system to be
set up, monitored and optimised over the
Where heat demand is even higher, the internet with the Vitotrol app on a smartphone
Vitocal 350-G can be operated in two-stage or tablet.
mode with an additional heat pump of the
same type, or with a Vitocal 300-G in a Operation with solar power generated
master/slave system, and can then provide on site
an output of up to 84.6 kW. As early as at the The Vitocal 350-G heat pump is already
design stage, this system configuration allows prepared for the utilisation of more affordable
for optimum matching of the heat pumps to power generated on site by a PV system.
the heat demand. An intelligent control unit ensures maximum
consumption of self-generated power while
Master/slave system for DHW and lowering energy costs.
central heating
In a master/slave system, the Vitocal 350-G
(master) delivers high flow temperatures for
DHW heating, while the Vitocal 300-G
(slave, without its own control unit) covers
the required heat load.
The EVI refrigerant circuit enables the

Vitocal 350-G to achieve an extremely high
COP of up to 5.0, which contributes to its low
operating costs.
Vitotronic 200 control unit with

communication capability
Viessmann uses the convenient Vitotronic 200
control unit to ensure standardised operation
for all its heat generators. The many functions
of this control unit include operation with
user prompts, an integral diagnostic system,
control of the instantaneous heating water
heater and an additional oil or gas boiler, and
of course, natural and active cooling functions.
Two-stage Vitocal 350-G
(master on the right/slave on the left)
as a brine/water or water/water heat
pump
Brine/water heat pump

Single stage heating output: 20.5 to 42.3 kW, two-stage: 41.0 to 84.6 kW
Water/water heat pump
Single stage heating output: 25.4 to 52.3 kW, two-stage: 50.8 to 117.8 kW
Low operating costs thanks to high coefficient of performance (COP) to EN 14511 of up to 5.0 (B0/W35)
Flow temperature: up to 70 °C
For specification, see page 56

Brine/water VITOCAL 300-G
heat pumps 21.2 to 42.8 kW (single stage)
42.4 to 85.6 kW (two-stage)
3
4
Vitocal 300-G
5
1 Vitotronic 200 heat pump control unit
2 Condenser
3 Large area evaporator for an efficient
exchange of heat
4 High efficiency pump
5 Hermetically sealed Compliant scroll
compressor
28/29
The Vitocal 300-G is the specialist for large

detached houses and apartment buildings.
For applications with higher heat demands,
the two-stage Vitocal 300-G, based on the
master/slave principle, is the right choice.
Cascades up to 589 kW
It can deliver a heating output from 42.4 to
85.6 kW (brine/water) with ground as the
primary heat source, or 56.2 to 117.8 kW
(water/water) when using groundwater. If this
is not enough, the integral cascade function
enables output to be raised to up to 589 kW
(water/water) with several Vitocal 300-G
units.
This also assures greater operational

reliability for the system as a whole. The
modular design, with separate compressor Two-stage Vitocal 300-G
(master on the right/slave on the left)
circuits, also ensures particularly high levels
as a brine/water heat pump, two-stage:
of efficiency in partial load operation, and
42.4 to 85.6 kW, maximum 428 kW
enables simultaneous central and DHW (as a cascade)
heating.
Powerful and reliable Quiet operation and great performance

At the heart of the Vitocal 300-G lies its are not mutually exclusive
powerful Compliant scroll compressor. This The hermetically sealed casing and particularly
component stands out on account of its high clever appliance design enable a reduction in
degree of operational safety and reliability. In noise emissions in the Vitocal 300-G that far
conjunction with the large heat exchangers and exceeds expectations in this output range.
integral refrigerant manifold, the Vitocal 300-G
achieves a high coefficient of performance and
flow temperatures up to 60 °C.
Brine/water heat pump

Single stage heating output: 21.2 to 42.8 kW, two-stage: 42.4 to 85.6 kW, maximum: 428 kW
(as a cascade)
Water/water heat pump
Single stage heating output: 28.1 to 58.9 kW, two-stage: 56.2 to 117.8 kW, maximum: 589 kW
(as a cascade)
Flow temperature: up to 60 °C
Sound power level: ≤ 44 dB(A)
Integral energy statement
Easier handling through small and light modules
For specification, see page 58

Viessmann Heat Pump

Uploaded by

Copyright:

Available Formats

Viessmann Heat Pump

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Viessmann Heat Pump

Uploaded by

Copyright:

Available Formats

Brine/water

temperature heat pumps and, in conjunction as proof of the COP,

Take advantage of these benefits

Low noise and vibration emissions through sound-optimised appliance design

1 Vitotronic 200 control unit

The EVI refrigerant circuit enables the

Vitotronic 200 control unit with

Take advantage of these benefits

Brine/water heat pump

For specification, see page 56

The Vitocal 300-G is the specialist for large

This also assures greater operational

Powerful and reliable Quiet operation and great performance

Take advantage of these benefits

Brine/water heat pump

For specification, see page 58

You might also like