Scribd
Upload
288 views9 pages

VPN Instructions - Windows 10 PDF

To set up a VPN connection in Windows 10, follow these steps: 1. Open the Network and Sharing Center and click "Set up a new connection or network". 2. Select "Connect to a workplace" and then "Use my Internet connection (VPN)". 3. Enter the Internet address and destination name provided by your IT department. 4. Access additional settings to enter your login credentials and enable the connection.

Uploaded by

gigox
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
288 views9 pages

VPN Instructions - Windows 10 PDF

To set up a VPN connection in Windows 10, follow these steps: 1. Open the Network and Sharing Center and click "Set up a new connection or network". 2. Select "Connect to a workplace" and then "Use my Internet connection (VPN)". 3. Enter the Internet address and destination name provided by your IT department. 4. Access additional settings to enter your login credentials and enable the connection.

Uploaded by

gigox
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 9

How to set up your VPN connection in Windows 10 

Step 1) Click on the Windows icon in the bottom left corner of the desktop, begin typing “network and 
sharing”, then click on the “Network and Sharing Center” icon that appears. 

 
 

Step 2) Click “Set up a new connection or network”. 

 
Step 3) Select “Connect to a workplace” then click “Next”. 

 
 

Step 4) Select “User my Internet connection (VPN)”. 

 
 
Step 5) In the “Internet address:” field, enter “128.146.26.7”.  In the “Destination name:” field, enter 
“Glenn College VPN”.  Click “Create”. 

 
 

Step 6) You should now be back at the Network and Sharing Center window.  Click “Change adapter 
settings”. 

 
 
Step 7) RIGHT‐CLICK the Glenn College VPN connection, then left click Properties. 

 
 

Step 8) Set the fields as shown below for items 1‐4 then click the “Advanced settings” button. 

 
Step 9) In the Advanced Properties window that pops up, choose the “Use preshared key for 
authentication” button, then enter the Key.  You will need to contact Ryan or Caleb to get the pre‐
shared key for this connection.  Click OK when you have entered it. 

 
 

Step 10) Click “OK” on the Glenn College VPN Properties window.  You may also close the Network and 
Sharing Center window if it is still open at this point. 

 
 

Step 11) At the bottom right corner of the task bar, click on the Network icon (it either looks like a 
computer screen if connected to a physical connection or a series of signal bars if connected to a 
wireless network).  Then click on Glenn College VPN. 

 
 

 
Step 12) Select the “Glenn College VPN” then click the “Advanced options” button. 

 
 

Step 13) Click the “Edit” button. 

 
 
Step 14) Enter your Glenn College user name (glenn\name.#) and password.  Check the “Remember my 
sign‐in info” box, then click “Save”. 

 
Step 15) Click the Back arrow at the upper left corner. 

 
Step 16) Click the “Connect” button under “Glenn College VPN” and your VPN connection will begin the 
authentication procedure. Your connection will not be complete until you approve the connection 
through the BuckeyePass (Duo) Multifactor Authentication tool on your phone or mobile device.  
 

 
When the connection is complete, it will show as “Connected”. 

You might also like