FasTrak
Engineering
GREAT Solutions
Smart positioner with high-capacity,
high-precision digital-pneumatic
valve controller
IMI Series
PT STI / FasTrak Smart Positioner
FasTrak Smart Positioner
FasTrak is a high-capacity, high-precision digital-pneumatic valve
controller that replaces a conventional positioner. It has an excellent
dynamic performance and high flow (Cv = 2). Configuration and Compatible with a
calibration is carried out with a HARTTM device or by self calibration. variety of actuators
FasTrak is compatible with double and single acting actuators, with
or without a spring, a piston or a diaphragm.
Key features
> High Flow Precision Control > Communications
The unique design allows high speed - 4-20 mA control and power with
performance in large volume actuators HART™ communication protocol
without additional amplification (e.g. - High speed serial connection
booster or quick exhaust)
> Sofware Interface
> Control Algorithms & Hardware Dedicated software (RCFT) to set,
Self calibration on double acting piston, customize, control and monitor high High precision
diaphragm, rotary actuator with or dynamic performance repeatability
without spring; patented adjustable
> Certifications & Approvals
independent control parameter to
- EUROPEAN DIRECTIVE
open and close stroke
- Intrinsically safe (Ex ia) / Explosion proof
> Strong Shaft Design (Ex d [ia]) according to:
Not sensitive to radial and axial external
load caused by mounting and linkages ATEX (2014/34/EU)
> Environmental Protection
The IP66 protection and unique exhaust IECEX
protection system makes it suitable to
be installed in harsh environments where CSA/cUS
there is tropical rain, dust, sand, salt.
TR CU
> Embedded Features
- 4-20 mA position feedback INMETRO
- Digital inputs for configurable trips
- Digital outputs configurable for limit
switches and/or alarm
Benefits
> No need for an amplification device in > Powerful self calibration software
most applications with the ability to totally personalise
the parameters
> Superior control capacity of amplification
device when installed > Wide set of configurable
embedded features
> High flow with quick, precise complete
control capability > Robust design with a full metal housing
FasTrak is available in stainless
steel 316 with explosion proof barrier
Technical specifications
Connection Air Supply
Power 2 wire from signal Instrument air Free of oil, water and dust to
min 3.5 mA, 12/30 Vdc (Ex ia) ISO 8573-1 - Class 3
min 3.5 mA, 19/24 Vdc (Ex d) Supply pressure 2.5÷10 bar
Electrical connections Signal ½” NPT (or metric Air consumption CV=2 1.5 Nm3/h at 6 bar
M20x1.5 on request) Auxiliary CV=0.3 0.5 Nm3/h at 6 bar
input / output ½” NPT
Performance Data (for angle > 90°) According to IEC 61514-2
(or metric M20x1.5 on request)
Pneumatic connections ½" NPT female Hysteresis + deadband ±0.15%
Communication protocol HARTTM Repeatibility ±0.15%
TTL RS232 Sensitivity ±0.1%
Linearity ±0.3%
Input Influence of ambient
Signal 4-20 mA with HARTTM protocol temperature 0.3% for every 10°C
Configurable split range Air capacity Up to 180 Nm3/h at 6 bar (CV 2.3)
On off Nr 2 configurable digital
Environmental Capabilities
(optocoupler 24Vdc)
Ambient Protection IP66 NEMA 4X
Output Operation temperature
Position 4-20 mA passive loop -40° to +80°C
On off Nr 2 configurable digital -55° to +80°C for TR CU
(optocoupler 24Vdc) Humidity Up to 100%
Vibrations Up to 2g (ISA S75.13)
Stroke Movement
CE mark CE conformity and EMC
Feedback angle of rotation 30°/120°
(<30° with lower resolution) Materials
Adjustable speed Range 0/300 seconds, Aluminium
individually configurable Stainless steel feedback shaft
for each direction Fully stainless steel 316
Characteristic curve Linear
Weight
Equal percentage
Configurable Aluminium (Ex ia) 3.25 kg
Control parameter Individually configurable Aluminium (Ex d) 4.11 kg
for each direction Stainless steel 316 (Ex ia) 8.82 kg
Travel control Minimum and maximum settable Stainless steel 316 (Ex d) 10.78 kg
stroke limits
Adjustable thrust on seat
Full model selection
available on our website
www.imi-critical.com
Options & accessories
> Remote feedback sensor > High speed communication kit
> Universal linkage for: > High corrosion resistance version stainless-
- linear long stroke actuator steel 316 case
(70÷1500 mm)
> Fail in place version
- VDI/VDE 3845 for rotary applications
- lever for side yoke or top mounting > Advanced diagnostic with option pack
application
> Display and push button
- customized application
> Low air capacity version
> Directly mounted pneumatic accessories:
- gauges and lock up valve > Low bleed version
> Collected or high silenced exhaust
FT display version
Remote control software interface
> User friendly interface with all key parameters shown > Events and errors report
on one screen
> Certified HART™ protocol communication 375/475
> Tool for easy mechanical feedback alignment handheld compliant
> Self calibration wizard > Option Pack 1 Advanced diagnostic: Valve signature -
Step response and other features
> All parameters with full control via an interactive start up page
> Option Pack 2 Advanced feature: Stability control -
> Graph tool for performance monitoring with
Soft approach to seat - Frequency response analysis
configurable parameters
and other features
HART HART HART
TM TM TM
MUX
HART modem
TM
4-20 mA
Valve signature Step response
IMI STI - Headquarters IMI STI - Quarter Turn Division
Via Dei Caravaggi 15 Via San Francesco 18
24040 Levate (BG) 29017 Fiorenzuola d’Arda (PC)
Italy Italy
Tel. +39 035 2928.2 Tel. +39 035 2928.2
Fax +39 035 2928.247 Fax +39 0523 1715.295
IMI Critical Engineering Bergamo
Lakeside, Solihull Parkway
Birmingham Business Park
Malpensa Brescia Verona
Birmingham B37 7XZ
Airport Milan
United Kingdom Milano/
Orio al Serio
Tel: +44 (0)121 717 3700 Airport
Fax: +44 (0)121 717 3701 Linate
Airport
www.imi-critical.com
[email protected] Piacenza
Information in this document is protected by copyright. All rights are reserved. Information in this document may
be modified at any time without notice.
