0% found this document useful (0 votes)
74 views2 pages

Canada: Electrical Specifications

The document summarizes a miniature epoxy potted audio transformer. It is 1) ruggedly constructed with black epoxy potting, 2) completely sealed to withstand environmental conditions, and 3) has a net weight of only 0.1 oz. and is pin type and PCB mount. It provides electrical specifications including typical characteristics, impedance, inductance, turns ratio, and frequency response.

Uploaded by

Ricardo Urio
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
74 views2 pages

Canada: Electrical Specifications

The document summarizes a miniature epoxy potted audio transformer. It is 1) ruggedly constructed with black epoxy potting, 2) completely sealed to withstand environmental conditions, and 3) has a net weight of only 0.1 oz. and is pin type and PCB mount. It provides electrical specifications including typical characteristics, impedance, inductance, turns ratio, and frequency response.

Uploaded by

Ricardo Urio
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Hammond Mfg. Co. Ltd.

, Electronics Division

www.hammondmfg.com

101F
MINIATURE EPOXY POTTED AUDIO TRANSFORMER 1 8
Pin type, P.C. board mount, net weight of only 0.1 oz. 2 7
Rugged black epoxy potted construction produces a
completely 3 6
sealed unit withstanding severe environmental conditions. 101F
Secondary may be used as primary and primary as secondary. 4 5
Power level: 100mw @ 300 Hz. to 100 Khz. CANADA
-Freq. range @ +10 dbm is 200 Hz. to 100 Khz. +/- 0.5db
-Freq. range @ +15 dbm is 200 Hz. to 100 Khz. +/- 0.5db
-Freq. range @ +20 dbm is 300 Hz. to 100 Khz. +/- 0.5db
-Freq. measurements with no D.C. saturation.

1 8
ELECTRICAL SPECIFICATIONS 2 7
3 6
101F
4 5
CANADA
Characteristic Typical
Input Impedance 600 ΩCT
Output Impedance 600 ΩCT
Output Power 0.100 Watts
DCR
Primary 1-3 44 Ω (22Ω/22Ω)
Secondary 6-8 52 Ω (26Ω/26Ω)
Inductance @ 1.0 kHz, 1.0 V OC
Primary 288 mH
Secondary 288 mH

Leakage Inductance 0.40 mH

Impedance @ 1.0 kHz, 1.0 V OC


Primary 2.86 KΩ SCHEMATIC DIAGRAM
Secondary 2.86 KΩ
PRIMARY SECONDARY
±0.5db from 200Hz to 1 6
Frequency Response 100KHz
Turns ratio 1:1

Dielectric Strength 100 Vrms


No Connection Pins 4 & 5

600 Ω CT 2 7 600 Ω CT
PCB LAYOUT

3 8
TYPICAL TEST CIRCUIT PRIMARY SECONDARY

R S/
2

RL OUT

R S/
Measurement instruments 2
Hp4192a impedance analyzer
Hp3456a DVM
Keithley 2002 DVM
D scope series iii audio analyzer

This drawing and the information in it is the property of Hammond Manufacturing. It may not be reproduced, transmitted or used in any manner whatsoever without the written permission of
Hammond Manufacturing. Data subject to change without notice.

You might also like