E-Giant M HC VA 01
E-Giant M HC VA 01
E-Giant M HC VA 01
PHOTOVOLTAIC MODULE
e.Giant M HC
144 MONOCRYSTALLINE HALFCUT CELLS
HIGHLY EFFICIENT
12-BUSBAR-HALFCUT
TECHNOLOGY
CLIMATE NEUTRAL
MANUFACTURED IN
EUROPE / AUSTRIA
www.energetica-pv.com
e.Giant M HC
Powerful. Elegant. Economical.
Innovation. Power. Sustainability. As giant among photovoltaic modules, e.Giant M HC is ideal for quick
and cost efficient installation in large systems such as solar parks and
And that for about 25 years. commercial applications. 144 monocrystalline half cells and 12-busbar
technology extract up to 465 Wp from the high-performer.
Energetica Photovoltaic Industries GmbH is an independent, The high-quality modules equipped with e.ISP guarantee the highest
Austrian photovoltaic technology company with headquarters power output of the Energetica portfolio. The robust stacking and pa-
and production facility in Liebenfels. The sustainable supply of ckaging system e.STAK by Energetica also guarantees that the modu-
renewable energy has been our goal for around 25 years. The focus les arrive at their destination stably and without micro-cracks.
is on our climate-neutral product portfolio, which is developed, And since packaging material is saved, the environment is also
tested and produced in one of the world‘s most modern 4.0 pro- protected.
duction facilities.
Pioneering technologies.
Our 12-busbar technology is used in the new e.Giant series. The usual busbar technology 12 busbar technology
energy generated is dissipated over 12 wafer-thin wires, instead of
wide collecting bars as before. This enables optimized shading ma-
nagement and the conservation of resources in cell production. Re-
Glas Glas
sult: the cell surface is used more effectively and the energy yield
increases with the same module size. In addition, the e.ISP® techno- EVA EVA
Ribbon
logy ensures better efficiency and optimized energy yield in the sun Ribbon
Cell Cell
and in the event of shading.
WE PAY ATTENTION TO DETAIL
e.ISP TECHNOLOGY®
Integrated Shadow Protection
(e.ISP) for improved efficiency
and optimized energy yield in
sun and shade.
12 BB TECHNOLOGY
For optimized shading, maxi-
mum efficiency and improved
reliability due to shorter electron
paths.
HALFCUT TECHNOLOGY
The optimized arrangement of
cells increase the energy yield.
The changed cell arrangement
improves the behavior of the
module when lesser exposed to
the sun.
e.Giant M HC
TOP QUALITY FROM THE HEART OF EUROPE INTEGRATED SHADOW MANAGEMENT (e.ISP® TECHNOLOGY)
Energetica modules are developed and produced exclusively in Aus- The integrated deactivation of the cell strings in the event of shad-
tria – Europe. Manufactured using patented processes, they are then ing is only available in Energetica modules. The active electronics
tested by independent institutes. integrated in the laminate guarantee a higher output than conven-
tional modules in both sun and shade.
17 YEAR WARRANTY ON OUR PRODUCTS
Energetica provides a 17-year warranty on products and 25 year war- CLIMATE NEUTRAL PRODUCTION
ranty of 86% on performance, extendable to 20/25 and 25/25 years. Sustainability is a central corporate goal of Energetica. We there-
fore avoid CO2 emissions in all areas. This includes the use of 100%
REDUCED WEAR clean energy in our production facilities as well as a fully electric
Energetica products are tested far harder than the IEC and UL fleet for sales and technical service.
standards require. Based on this, the annual degradation was
reduced by 10 percent. USER-FRIENDLY PERFORMANCE RECORDS
A weather-proof QR and barcode quickly and easily provides data
MAXIMUM PERFORMANCE ON SUNNY DAYS of the measured performance class, as well as the serial number
Thanks to the improved temperature coefficient, Energetica modu- and type of the module.
les can produce more energy on hot, sunny days.
RAPID INSTALLATION IN LARGE APPLICATIONS
HIGHER YIELDS WHEN SHADED e.Giant m hc is ideal for quick and cost-efficient installation in large
In the event of shading intelligent module design provides more systems such as solar parks and commercial applications.
than 50% more energy than conventional modules.
Note: This data sheet is a legally binding document and, in addition to the assembly instructions, is part of the proper documentation in accordance with OVE EN 50380. Due to constant technical
innovations, R&D and improvements, the above-mentioned technical data may change accordingly. Energetica has the sole right to make these changes at any time without notice. The data given
is without guarantee. Product representations are symbolic images and may differ in appearance and specified data from the original.
e.Giant M HC
Electrical dataElektrische
(STC) Daten Certifications and warranties
Type 440 445 450 455 460 Certifcations IEC 61215, IEC 61730, UL 61730
Maximum power (PMax) 440 Wp 445 Wp 450 Wp 455 Wp 460 Wp IEC 62716 (Ammonia corrosion test)
IEC 61701 (Salt mist corrosion test)
Open circuit voltage (VOC) 49,60 V 49,70 V 49,63 V 49,85 V 49,96 V ISO 9001, ISO 14001, OSHS 18001
MPP voltage (VMPP) 41,00 V 41,40 V 41,60 V 41,80 V 42,10 V Safety class II
MPP current (IMPP) 10,74 A 10,82 A 10,90 A 10,93 A 10,96 A Module fire performance Class C, Fire class 1 (Italy)
Short circuit current (ISC) 11,33 A 11,37 A 11,59 A 11,69 A 11,72 A Product warranty 17 years
Module efficiency (η Modul) 20,05 % 20,30 % 20,66 % 20,83 % 20,90 % Output warranty of PMAX 25 years linear
(Measurement Tolerance +/- 3%) 17 years extendable to 20/25
Performance sorting –0/+5 Wp –0/+5 Wp –0/+5 Wp –0/+5 Wp –0/+5 Wp
This measurements are valid on standard test conditions STC. All electrical data ±10%. Measurement uncertainty
PMPP (PMax): +/- 3%, (Airmass AM 1,5; radiation of 1000W/m2; cell temperature 25°C) Mechanical data
Dimensions HxWxD 2108 x 1042 x 36 mm
Weight 25 kg
Electrical dataElektrische
(NMOT) Daten Front cover highly transparent tempered glass
Type 440 445 450 455 460 3,2 mm
Maximum power (PMax) 352 Wp 335,4 Wp 339,5 Wp 342,1 Wp 345,5 Wp Backsheet coextruded Polypropylen (PP)
MPP voltage (VMPP) 37,90 V 38,09 V 38,28 V 38,46 V 38,74 V Frame silver anodized aluminum
MPP current (IMPP) 8,61 A 8,80 A 8,87 A 8,89 A 8,92 A Cells 24 x 6 High efficiency solar
Open circuit voltage (VOC) 46,30 V 45,68 V 45,83 V 46,03 V 46,14 V half cells (166 x 83 mm)
Short circuit current (ISC) 9,13 A 9,17 A 9,35 A 9,43 A 9,46 A Cell type monocrystalline, 12 busbars
NMOT (Nominal Module Operating Temperature): Irradiance 800 W/m2, ambient temperature 20 °C, wind speed 1 m/s Bypass control active electronics at string level
Modul connector 4/6mm² solar cable, (+,-) 1.150 mm
Connectors multi-contact MC4, IP68
Permissible operating conditions Origin Made in Austria
Temperature range -40°C bis +90°C all indicated dimensions in mm
Maximum system voltage 1.050 V, 1.500 V on request 1042±2.5 36
Test loadmax examined according to IEC up to 5.4 kPa snow/2.4 kPa wind
Breaking load >6.0 kPa Aluminum frame,
black anodized
Hail security hailstone up to 25 mm Ø at 165,6 km/h v impact
hailstone up to 55 mm Ø at 120,6 km/h v impact
Reverse current strength 16 A* Label (SN)
*In any case, due to the integrated active electronics, it must be ensured that there are no reverse currents greater than 16 A.
Temperaturkoeffizient
Temperature coefficient(Tk)
(Tc)
0,05
Tc %/Kcircuit current
short 0,057 %/K 16x Drainage hole
–0,30 %/K
Tc open circuit voltage –0,27 %/K
–0,37
Tc %/K power
maximum –0,34 %/K
NOCT 42°C +/- 2
Junction box
(IP68) 2108±2.5
Current-Voltage-Curve
12 Cell temp=25°C
Incident Irrad.= 1000W/m2
10
Incident Irrad.= 800W/m2
8
Incident Irrad.= 600W/m2
Current (A)
6
Incident Irrad.= 400W/m2
4
Incident Irrad.= 200W/m2
2
0
0 10 20 30 40 50
Voltage (V)
Dokument: 20200603_e-Giant_M_HC