Scribd
Upload
157 views2 pages

8 Ducting PDF

This document provides a form for testing and commissioning ducting for an air conditioning system. The form has two parts: (1) a leakage test which records details of the duct section being tested, the test pressure, maximum permitted leakage, test readings of duct pressure and airflow, and calculated leakage rate; and (2) dimensions of the duct including width/diameter, periphery, length, and total area. The contractor and JKR representative must sign and date the completed form.

Uploaded by

Wan Arif Wan Nasir
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
157 views2 pages

8 Ducting PDF

This document provides a form for testing and commissioning ducting for an air conditioning system. The form has two parts: (1) a leakage test which records details of the duct section being tested, the test pressure, maximum permitted leakage, test readings of duct pressure and airflow, and calculated leakage rate; and (2) dimensions of the duct including width/diameter, periphery, length, and total area. The contractor and JKR representative must sign and date the completed form.

Uploaded by

Wan Arif Wan Nasir
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Ducting T&C Forms – Air Conditioning System

JKR/CKM/T & C :______________________

CAWANGAN KEJURUTERAAN MEKANIKAL


JABATAN KERJA RAYA

DUCTING TESTING AND COMMISSIONING PROCEDURE

Ducting

1. Leakage Test

Part 1 – Physical Details


Reading
(a) Section of ductwork to be tested
(b) Drawing number
(c) Pressure classification
(d) Test static pressure
(e) Leakage factor
(f) Surface area of duct under test
(g) Maximum permitted leakage

Part 2 – Test Particulars


Reading
(a) Duct static pressure reading
(b) Type of flow measuring device
(c) Range of measurement of flow measuring device
(d) Reading of flow measuring device
(e) Interpreted air flow leakage rate
(f) Duration of test ( normally 15 minutes )

2. Dimension of Duct

Width and Depth or Periphery Length Area


Diameter ( Millimeters) ( Meters ) ( Square
(Millimeters) Meters )

TOTAL
Ducting T&C Forms – Air Conditioning System
Checked By Contractor: Witness By JKR Representative:

Sign:………………………………….. Sign :…………………………………

Name:………………………………… Name:…………………………………

Date:…………………………………… Date:…………………………………..

You might also like