LTE Network Architecture

6/9/2020 LTE Network Architecture - Tutorialspoint
LTE Network Architecture
The high-level network architecture of LTE is comprised of following three main components:
The User Equipment (UE).

The Evolved UMTS Terrestrial Radio Access Network (E-UTRAN).
The Evolved Packet Core (EPC).
The evolved packet core communicates with packet data networks in the outside world such as
the internet, private corporate networks or the IP multimedia subsystem. The interfaces between
the different parts of the system are denoted Uu, S1 and SGi as shown below:
The User Equipment (UE)

The internal architecture of the user equipment for LTE is identical to the one used by UMTS
and GSM which is actually a Mobile Equipment (ME). The mobile equipment comprised of the
following important modules:
Mobile Termination (MT) : This handles all the communication functions.

Terminal Equipment (TE) : This terminates the data streams.
Universal Integrated Circuit Card (UICC) : This is also known as the SIM card for LTE
equipments. It runs an application known as the Universal Subscriber Identity Module
(USIM).
A USIM stores user-specific data very similar to 3G SIM card. This keeps information about the
user's phone number, home network identity and security keys etc.
The E-UTRAN (The access network)
The architecture of evolved UMTS Terrestrial Radio Access Network (E-UTRAN) has been
illustrated below.
https://www.tutorialspoint.com/lte/lte_network_architecture.htm 1/4
The E-UTRAN handles the radio communications between the mobile and the evolved packet
core and just has one component, the evolved base stations, called eNodeB or eNB. Each eNB
is a base station that controls the mobiles in one or more cells. The base station that is
communicating with a mobile is known as its serving eNB.
LTE Mobile communicates with just one base station and one cell at a time and there are
following two main functions supported by eNB:
The eBN sends and receives radio transmissions to all the mobiles using the analogue
and digital signal processing functions of the LTE air interface.
The eNB controls the low-level operation of all its mobiles, by sending them signalling
messages such as handover commands.
Each eBN connects with the EPC by means of the S1 interface and it can also be connected to
nearby base stations by the X2 interface, which is mainly used for signalling and packet
forwarding during handover.
A home eNB (HeNB) is a base station that has been purchased by a user to provide femtocell
coverage within the home. A home eNB belongs to a closed subscriber group (CSG) and can
only be accessed by mobiles with a USIM that also belongs to the closed subscriber group.
The Evolved Packet Core (EPC) (The core network)
The architecture of Evolved Packet Core (EPC) has been illustrated below. There are few more
components which have not been shown in the diagram to keep it simple. These components
are like the Earthquake and Tsunami Warning System (ETWS), the Equipment Identity Register
(EIR) and Policy Control and Charging Rules Function (PCRF).
Below is a brief description of each of the components shown in the above architecture:
The Home Subscriber Server (HSS) component has been carried forward from UMTS
and GSM and is a central database that contains information about all the network
operator's subscribers.
The Packet Data Network (PDN) Gateway (P-GW) communicates with the outside
world ie. packet data networks PDN, using SGi interface. Each packet data network is
identified by an access point name (APN). The PDN gateway has the same role as the
GPRS support node (GGSN) and the serving GPRS support node (SGSN) with UMTS
and GSM.
The serving gateway (S-GW) acts as a router, and forwards data between the base
station and the PDN gateway.
The mobility management entity (MME) controls the high-level operation of the mobile
by means of signalling messages and Home Subscriber Server (HSS).
The Policy Control and Charging Rules Function (PCRF) is a component which is not
shown in the above diagram but it is responsible for policy control decision-making, as
well as for controlling the flow-based charging functionalities in the Policy Control
Enforcement Function (PCEF), which resides in the P-GW.
The interface between the serving and PDN gateways is known as S5/S8. This has two slightly
different implementations, namely S5 if the two devices are in the same network, and S8 if they
are in different networks.
Functional split between the E-UTRAN and the EPC

Following diagram shows the functional split between the E-UTRAN and the EPC for an LTE
network:
2G/3G Versus LTE
Following table compares various important Network Elements & Signaling protocols used in
2G/3G abd LTE.
2G/3G LTE
GERAN and UTRAN E-UTRAN
SGSN/PDSN-FA S-GW
GGSN/PDSN-HA PDN-GW
HLR/AAA HSS
VLR MME
SS7-MAP/ANSI-41/RADIUS Diameter
DiameterGTPc-v0 and v1 GTPc-v2
MIP PMIP

LTE Network Architecture - Tutorialspoint

Uploaded by

Copyright:

LTE Network Architecture - Tutorialspoint

Uploaded by

Document Information

Copyright

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

LTE Network Architecture - Tutorialspoint

Uploaded by

Copyright:

6/9/2020 LTE Network Architecture - Tutorialspoint

The User Equipment (UE).

The Evolved Packet Core (EPC).

The User Equipment (UE)

Mobile Termination (MT) : This handles all the communication functions.

The E-UTRAN (The access network)

The Evolved Packet Core (EPC) (The core network)

Functional split between the E-UTRAN and the EPC

2G/3G Versus LTE

GERAN and UTRAN E-UTRAN

DiameterGTPc-v0 and v1 GTPc-v2

You might also like