Hollow-Ceiling Anchor FHY: Technical Data
Hollow-Ceiling Anchor FHY: Technical Data
Hollow-Ceiling Anchor FHY: Technical Data
TECHNICAL DATA
d0 l M h1 lE,min
Art.-No. Art.-No. DIBt [mm] [mm] [mm] [mm] [pcs]
Item gvz A4
FHY M 6 030138 — ▯ 10 37 M6 50 37 50
FHY M 6 — 030139 — 10 37 M6 50 37 50
FHY M 8 030146 — ▯ 12 43 M8 60 43 25
FHY M 8 — 030147 — 12 43 M8 60 43 25
FHY M10 030148 — ▯ 16 52 M 10 65 52 20
FHY M10 — 030151 — 16 52 M 10 65 52 20
LOADS
Hollow-ceiling anchor FHY zinc plated steel
Highest permissible loads1)3) for a single anchor in pre-stressed hollow-core concrete slabs of strength class ≥ C45/55.
Type Bottom flange Installation Permissible Required edge distance (with Min. Min.
thickness torque load one edge) for spacing edge distance
max. load
du Tinst Fperm2) smin4) cmin4)
[mm] [Nm] [kN] [mm] [mm] [mm]
25 - 29 0,7 70
FHY M6 30 - 39 10 0,9 80
≥40 2,0 100
25 - 29 0,7 70
150 100
FHY M8 30 - 39 10 0,9 80
≥40 2,0 100
30 - 39 1,2 80
FHY M10 20
≥40 3,0 100
For the design the complete approval Z-21.1-1711 has to be considered.
1)
The required safety factors as regulated in the approval are considered.
2)
Valid for tensile load, shear load and oblique load under any angle. For combinations of tensile loads, shear loads, bending moments as well as reduced edge distances or spacings (anchor groups) see
approval.
3)
For screw strength class 4.6.
4)
Minimum possible axial spacings resp. edge distance while reducing the permissible load.
305
Hollow-ceiling anchor FHY
LOADS
Hollow-ceiling anchor FHY stainless steel A4
Highest recommended loads 1) 3) for a single anchor in pre-stressed hollow-core concrete slabs of strength class ≥ C45/55.
Type Bottom flange Installation Recommended Required edge distance (with Min. Min.
thickness torque load one edge) for spacing edge distance
Max. load
du Tinst Frec2) smin4) cmin4)
[mm] [Nm] [kN] [mm] [mm] [mm]
25 - 29 0,7 70
4 FHY M6 A4 30 - 39 10 0,9 80
≥40 2,0 100
High performance steel anchors
25 - 29 0,7 70
150 100
FHY M8 A4 30 - 39 10 0,9 80
≥40 2,0 100
30 - 39 1,2 80
FHY M10 A4 20
≥40 3,0 100
1)
Required safety factors are considered.
2)
Valid for tensile load, shear load and oblique load under any angle.
3)
For screw strength class A4-70.
4)
Minimum possible axial spacings resp. edge distance while reducing the permissible load.
306