Qlik NPrinting Installation

__________________________________________________________________________________

Qlik NPrinting Installation
In a minimal installation, Qlik NPrinting Server, a single Qlik NPrinting Engine, and Qlik
NPrinting Designer can be installed on the same computer.

1. Installing Qlik NPrinting Server

2. Installing Qlik NPrinting Engine
3. Installing Qlik NPrinting Designer

Installing Qlik NPrinting Server

Creating a Qlik NPrinting service user
Do the following:

1. Create a user to run your Qlik NPrinting services. The user must be a local

Administrator, with Logon as a Service rights, and should be used exclusively to
run Qlik NPrinting services.
a. In Windows Computer Management, go to Local Users and
Groups > Users, and click Action > New User....
b. Enter a User name and Password for the user and click Create.

c. Right-click on the user that you created in the previous step, and
click Properties.

Page 1 of 12
 Qlik NPrinting Installation
__________________________________________________________________________________

d. Click on the Member Of tab and click Add....

e. Enter Administrators in the field and click Check Names. If the name is valid,
click OK.

f. From the Windows Control Panel, go to Administrative Tools, and click

on Local Security Policy.
g. Go to Local Policies > User Rights Assignment, and click Log on as a
service.
h. On the Local Security Setting tab, click Add User or Group....
i. Enter the user that you created in the previous steps and click Check Names.
If the name is valid, click OK.
2. Log into the computer where you plan to install Qlik NPrinting Server as a
local Windows administrator. You can use the account that you created in the
previous steps.
a. To verify that you are logged on as a local administrator, go to Control
Panel > User Accounts. You can see the groups that the user belongs to under
the name on the contact card.

Page 2 of 12
 Qlik NPrinting Installation
__________________________________________________________________________________

Installing Qlik NPrinting Server

Do the following:

1. Double-click QlikNPrintingServer_x64.exe to launch the setup.

2. Click the check box to accept the license agreement, and click Install. If:
o The User Account Control window appears, click Yes to proceed.
o The MicrosoftVisual C++ 2013 window appears, accept the license terms and install
it. If you have an older version installed, click Repair. When the installation is
complete, click Close.
o The Windows Security Alert appears, select both check boxes and then click
on Allow access. Erlang needs to communicate over the network, so you must allow
the creation of the related firewall rule.
3. On the Qlik NPrinting repository Service Setup Welcome page, click Next.
4. On the Repository database superuser password screen, enter a password for the Qlik
NPrinting repository database superuser.
Qlik NPrinting installs a PostgreSQL repository database during setup. The database
superuser is a PostgreSQL login role with the highest level of privileges that bypasses
all permission checks. You will need this password to administrate your PostgreSQL
installation.

Page 3 of 12
 Qlik NPrinting Installation
__________________________________________________________________________________

Note: Password Bumitama2020

5. On the Administrator credentials screen:

o Enter the following to create a Qlik NPrinting user with administrative privileges:

 Administrator username
 Email address
 Password
This user is used the first time you log into Qlik NPrinting.

Page 4 of 12
 Qlik NPrinting Installation
__________________________________________________________________________________

Note:
Admin Username : NPAdmin
Email Addr : [email protected]
Password : Bumitama2020
Repeat password : Bumitama2020

o Click Next.
b. Click Install.

Page 5 of 12
 Qlik NPrinting Installation
__________________________________________________________________________________

A screen indicating that the repository database setup is complete appears.

c. Click Finish.
d. On the Qlik NPrinting Server Welcome page, click Next.
e. On the Installation options screen, select your preferred program shortcut locations and
click Next.
f. On the Service logon credentials screen, type the credentials for the user that you created
in Creating:
o Account: Enter the Domain and User name in this format Domain\User name. You
can use the Browse button to search for the user.
o Password: Enter the user's Password.
o Click Test Credentials to verify that the user credentials are valid.
If the log on credentials are validated successfully, the Test
Credentials button is grayed out and a green check mark appears next to it.

Page 6 of 12
 Qlik NPrinting Installation
__________________________________________________________________________________

o Click Next.
g. Click Install.
h. Click Finish.
The Setup Successful screen appears.

i. Click Close.

Installing Qlik NPrinting Engine

Creating a Qlik NPrinting service user
Do the following:

1. Create a user to run your Qlik NPrinting services. The user must be a local Administrator,
with Logon as a Service rights, and should be used exclusively to run the Qlik
NPrinting services.
a. In WindowsComputer Management, go to Local Users and Groups > Users, and
click Action > New User....
b. Enter a User name and Password for the user and click Create.
c. Right click on the user that you created in the previous step, and click Properties.

Page 7 of 12
 Qlik NPrinting Installation
__________________________________________________________________________________

d. Click on the Member Of tab and click Add....

e. Enter Administrators in the field and click Check Names. If the name is valid,
click OK.
f. From the WindowsControl Panel, go to Administrative Tools, and click on Local
Security Policy.
g. Go to Local Policies > User Rights Assignment, and click Log on as a service.
h. On the Local Security Setting tab, click Add User or Group....
i. Enter the user that you created in the previous steps and click Check Names. If the
name is valid, click OK.
2. The user that runs the Qlik NPrinting Engine service must:

a. Be a member of the Administrators group on all QVS servers used by Qlik NPrinting.
b. Have an active license for QlikView Desktop, which must be installed on the Qlik
NPrinting Engine computer.
o Log into the computer where you plan to install Qlik NPrinting Engine as a
local Windows administrator. You can use the account that you created in the
previous steps.

a. To verify that you are logged on as a local administrator, go to Control Panel > User

Accounts. You can see the groups that the user belongs to under the name on the
contact card.

Installing Qlik NPrinting Engine

Do the following:

1. Double-click QlikNPrintingServer_x64.exe to launch the setup.

2. Select the check box to accept the license agreement, and click Install.
If the User Account Control window appears, click Yes to proceed.

3. On the Qlik NPrinting Engine Setup Welcome page, click Next.

4. On the Service logon credentials screen, use the credentials for the user that you created in
step 1. to complete the fields as follows:

Page 8 of 12
 Qlik NPrinting Installation
__________________________________________________________________________________

a. Account - Enter the Domain and User name in this format Domain\User name. You

can use the Browse button to search for the user.
b. Password - Enter the user's Password.
c. Click Test Credentials to verify that the user credentials are valid.
If the log on credentials are validated successfully, the Test
Credentials button is grayed out and a green check mark appears next to it.

d. Click Next.
5. On the Qlik NPrinting Server node screen, enter the name of the computer where Qlik
NPrinting Server is installed.
a. Click Test Credentials to verify that the server name is valid, and that it can be
reached from the Qlik NPrinting Engine computer.
If the server node is validated successfully, the Test Credentials button is grayed out
and a green check mark appears next to it.

Page 9 of 12
 Qlik NPrinting Installation
__________________________________________________________________________________

6. On the Engine certificate password screen, enter a password to encrypt certificate exchange

for TLS certificates.
7. Click Next to continue.
8. Click Install.
9. Click Finish.
The Setup Successful screen appears.

10. Click Close.
Qlik NPrinting Engine installs the Qlik NPrinting Engine Windows service that must be running.

Page 10 of 12
 Qlik NPrinting Installation
__________________________________________________________________________________

Installing Qlik NPrinting Designer

You need to install Qlik NPrinting Designer on all computers that you will use to develop report
templates.

Installing Qlik NPrinting Designer

Do the following:

1. Double-click QlikNPrintingDesigner_x64.exe to launch the setup.

2. On the Qlik NPrinting Designer Setup Welcome screen, click Next.
3. Accept the terms in the license agreement and click Next.
4. On the Destination Folder screen, click Change if you want to install to a folder other than
the default, and click Next.
5. On the Ready to Install the Program screen, click Install.
6. If the User Account Control window appears, click Yes to proceed.
7. Click Finish.

Page 11 of 12
 Qlik NPrinting Installation
__________________________________________________________________________________

Page 12 of 12