Scribd Logo
Upload

Welcome to Scribd!

  • 18 views

    Smith Tool: 10464 ER Purpose ER Purpose 9744 Design Specifications Design Specifications

    Uploaded by

    mohammad teimuri
    This document provides specifications for a Smith Tool IADC 116 drill bit used to test a new milled tooth design with a double gage grind and ST70M hardfacing on the gage configuration. Key details include it being a 9-7/8" bit with 7 rows and 63 total teeth, a 483a-1000 bearing, O-ring seal, and 32-1/2 degree journal angle. Operating parameters list weights on bit from 15,000 to 50,000 lbs with rotary speeds of 50 to 160 rpm. Features include full cap hardfacing and a highly aggressive cutting structure for maximum ROP in soft formations.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Smith Tool: 10464 ER Purpose ER Purpose 9744 Design Specifications Design Specifications

    Uploaded by

    mohammad teimuri
    18 views1 page
    This document provides specifications for a Smith Tool IADC 116 drill bit used to test a new milled tooth design with a double gage grind and ST70M hardfacing on the gage configuration. Key details include it being a 9-7/8" bit with 7 rows and 63 total teeth, a 483a-1000 bearing, O-ring seal, and 32-1/2 degree journal angle. Operating parameters list weights on bit from 15,000 to 50,000 lbs with rotary speeds of 50 to 160 rpm. Features include full cap hardfacing and a highly aggressive cutting structure for maximum ROP in soft formations.

    Original Title

    09-875_FDS+_116_ER5144_1

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides specifications for a Smith Tool IADC 116 drill bit used to test a new milled tooth design with a double gage grind and ST70M hardfacing on the gage configuration. Key details include it being a 9-7/8" bit with 7 rows and 63 total teeth, a 483a-1000 bearing, O-ring seal, and 32-1/2 degree journal angle. Operating parameters list weights on bit from 15,000 to 50,000 lbs with rotary speeds of 50 to 160 rpm. Features include full cap hardfacing and a highly aggressive cutting structure for maximum ROP in soft formations.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    18 views1 page

    Smith Tool: 10464 ER Purpose ER Purpose 9744 Design Specifications Design Specifications

    Uploaded by

    mohammad teimuri
    This document provides specifications for a Smith Tool IADC 116 drill bit used to test a new milled tooth design with a double gage grind and ST70M hardfacing on the gage configuration. Key details include it being a 9-7/8" bit with 7 rows and 63 total teeth, a 483a-1000 bearing, O-ring seal, and 32-1/2 degree journal angle. Operating parameters list weights on bit from 15,000 to 50,000 lbs with rotary speeds of 50 to 160 rpm. Features include full cap hardfacing and a highly aggressive cutting structure for maximum ROP in soft formations.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    Smith

    Tool
    IADC 116

    Type

    FDS+
    Size

    9-7/8"
    (250.8mm)
    ER

    5144
    10464;ER
    ER Purpose
    Purpose;
    Test of new milled tooth circumferental design with double gage grind. ST70M hardfacing on new gage configuration.
    Design Specifications
    9744;Design Specifications
    Bearing Type 483a-1000
    Seal Type O-RING
    Journal Angle 32-1/2º
    Offset 3/8"
    Number of Rows 7
    Number of Teeth 63
    Inner/Gage 33/30
    Bit Connection Type 6-5/8" Reg.
    9744;General
    General Operating
    Operating
    Parameters
    Parameters
    Weight-on-bit
    Lbs. 15,000 to 50,000
    daN 6,672 to 22,241
    Tonnes 7 to 23
    Rotary Speed 50 to 160 rpm
    3240|360|6144;Features||Benefits;
    Features Benefits
    Full cap hardfacing, Grade 70C+ hardmetal Increased carbide content and application of hardmetal significantly reduces wear,
    extending tooth life and increasing ROP.
    Highly aggressive cutting structure Maximizes ROP in soft, highly drillable formations.
    Maximum offset Allows drilling at high ROP in speed-responsive formations.
    Spinodal bearing Greater tensile strength increases weight and rpm capability. High ductility provides
    increased impact resistance.
    ST70M hardfacing on gage Grade 70M hardfacing is a special alloy with large macrocrystalline grains that provides
    exceptional wear and impact resistance.
    DbP970821110724 - Smith Tool Technical Services Rock Bit Database v 3. 1. 24

    Confidential - Do Not Reproduce

    You might also like