Scribd Logo
Upload

Welcome to Scribd!

  • 102 views

    Magnum: Rock Bits

    Uploaded by

    mohammad teimuri
    This document summarizes the specifications and applications of an IADC 435X 10M rock bit. It is designed for long rotary or steerable mud motor runs in soft, abrasive formations like claystones and shales. Key features include precision roller bearings, O-ring seals, and various cutter configurations to maximize rate of penetration and bit life. Operating parameters include weights-on-bit from 15,000 to 60,000 pounds and rotation speeds from 70 to 280 rpm.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Magnum: Rock Bits

    Uploaded by

    mohammad teimuri
    102 views1 page
    This document summarizes the specifications and applications of an IADC 435X 10M rock bit. It is designed for long rotary or steerable mud motor runs in soft, abrasive formations like claystones and shales. Key features include precision roller bearings, O-ring seals, and various cutter configurations to maximize rate of penetration and bit life. Operating parameters include weights-on-bit from 15,000 to 60,000 pounds and rotation speeds from 70 to 280 rpm.

    Original Title

    17-05_10M_435X_2

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document summarizes the specifications and applications of an IADC 435X 10M rock bit. It is designed for long rotary or steerable mud motor runs in soft, abrasive formations like claystones and shales. Key features include precision roller bearings, O-ring seals, and various cutter configurations to maximize rate of penetration and bit life. Operating parameters include weights-on-bit from 15,000 to 60,000 pounds and rotation speeds from 70 to 280 rpm.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    102 views1 page

    Magnum: Rock Bits

    Uploaded by

    mohammad teimuri
    This document summarizes the specifications and applications of an IADC 435X 10M rock bit. It is designed for long rotary or steerable mud motor runs in soft, abrasive formations like claystones and shales. Key features include precision roller bearings, O-ring seals, and various cutter configurations to maximize rate of penetration and bit life. Operating parameters include weights-on-bit from 15,000 to 60,000 pounds and rotation speeds from 70 to 280 rpm.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    MAGNUM

    Rock Bits
    IADC 435X

    Type

    10M
    Size

    17-1/2"
    (444.5mm)

    10464;Drilling
    Drilling Applications
    Applications
    Designed for long-interval rotary or steerable mud motor runs where extended bearing life and/or directional responsiveness are of
    primary concern. Able to drill soft, low compressive strength, abrasive formations at high penetration rates. Effective in drillable
    claystones, shales, marls and silty shales with low-strength sand stringers.
    Design Specifications
    9744;Design Specifications
    Bearing Type Precision Roller Bearing
    Seal Type O-RING
    Journal Angle 32-1/2º
    Offset 3/8"
    Inner/Near-Gage/Gage Rows 10/3/3
    Inner/Near-Gage/Gage Inserts 92/45/45
    Bit Connection Type 7-5/8" Reg.
    9744;General
    General Operating
    Operating
    Parameters
    Parameters
    Weight-on-bit
    Lbs. 15,000 to 60,000
    daN 6,672 to 26,689
    Tonnes 7 to 27
    Rotary Speed 70 to 280 rpm
    3240|360|6144;Features||Benefits;
    Features Benefits
    • Magnum inserts Sharper tip radius and increased crest width provide higher ROP and longer life.
    • Precision Roller Bearing Improved bearing life using precision machined, tight tolerance surfaces and
    controlled-countour rollers.
    • Q-Flow Plus Tube High flow rate tube with realignment of flow towards the hole bottom for maximum
    hydraulic energy. Can be used with standard or mini-extended nozzles.
    • Relieved core feature Improves ROP by eliminating need to drill center of the bore hole. Diamond enhanced
    nose inserts prevent coring.
    • Silver plated bearing components Maximizes galling resistance in the event of lubricant film breakdown.
    • Trucut gage Diamond SRT inserts interspersed with inclined chisel inserts maximizes gage wear
    resistance, but minimizes fatigue and heat checking induced breakage.
    Extended center jet Ensures complete hole cleaning by maximizing on bottom hydraulics.
    DbP970820093610 - Smith Tool Technical Services Rock Bit Database v 3. 1. 24

    You might also like