Alignment & Adjustment

3. Alignment & Adjustment

3-1 Service Instruction
1. General Adjustment :
In general, a color TV can provide ideal visual quality by adjusting the basic settings such as the vertical size, horizontal size,
focus, etc.
Display a black and white picture on the screen to check if the picture is clearly displayed.
If there are some 'spotted' points on the screen when displaying a black and white picture, degauss the screen using the
degauss coil. If the spotted points remain, re-adjust the purity and the convergence. This completes the basic performance
examination.

Notice.
■ These adjustments and the check list are only applied to KS9C chassis-applied models.
■ use 110v for the measurement set. It is recommended using an
insulation transformer when supplying power to the set so as to prevent shock to the set or to yourself.
■ These adjustment specifications have been created on the basis of the domestic KS9C chassis-applied remote
control model. Some of the contents may be changed subject to the sales location and the product specifications.

2. When replacing the Main Board :

Focus adjustment, screen voltage setting and W/B adjustment are all required.

3. When replacing the CRT Ass'y : No adjustments required.

Samsung Electronics 3-1

Alignment & Adjustment

3-2 How to Access Service Mode

1. To enter Service Mode, press the keys on the remote control according to the following sequence. (in Stand-by status)

Info → Menu →MUTE→ power On

※ When failing to enter Service Mode, repeat the procedure above.

2. The initial screen of Service Mode.

ADJUST
OPTION
G2-ADJUST
CHCKSUM
RESET
T-FMTNUS

3. Functions of the Keys within Service Mode

MENU Show all menus
▲ /▼ Move the cursor to select an item.
◀/▶ Adjust the selected configuration value

3-2 Samsung Electronics

 Alignment & Adjustment

3-3 Factory Data ★ The underlined are items applied during the service adjustment. None of the others should be adjusted.

1.T-FMTNUS
No Item Adjust/Fix Initial Remark
1 HS Adjust 37
2 VA Adjust 34
3 VSL Adjust 30
4 VS FIX 31
5 AGC Adjust 33
6 CDL FIX 9
7 SCT Adjust 10
8 SBT Adjust 7
9 BLR Adjust 28
10 BLB Adjust 43
11 RG Adjust 30
12 GG FIX 32
13 BG Adjust 46
14 SC FIX 29
15 STT FIX 29
16 AKB FIX 0
17 NDL FIX 1
18 NSR FIX 5
19 VOL FIX 10
20 MVOL FIX 7
21 RPO0 FIX 1
22 RPO1 FIX 1
23 CAP FIX 12
24 FMWS FIX 0
25 AGCS FIX 1
26 OMD FIX 15
27 SCL FIX 3
28 PWL FIX 13
29 MUS FIX 1
30 SCBT FIX 40
31 SSP FIX 5
32 DNSR FIX 17
33 DSBT FIX 0
34 DCDL FIX 6
35 DBLR FIX 32
36 DBLB FIX 32
37 DSK FIX 0

Samsung Electronics 3-3

Alignment & Adjustment

2.Option
No Item Initial 21"FLAT Remark
Video Mute time between the Channel
1 Video Mute Off Off
changes
2 Audio STEREO STEREO Audio MONO/STEREO Option
3 2ND SIF EXTERNAL EXYERNAL SIF Option
Turns on automatically when the Master
4 Auto Power Off Off
Power is turned ON
Mutes the Audio when the there is no
5 Audio Mute On On
source signal
Preset OSD (On-Screen Display) laguage
6 Start Language English English
at time of purchase
7 Hotel Mode Off Off

8 Blue Screen On On Blue Screen when there is no source signal

9 V-Chip Off Off

10 AV Option AV1/2/DVD/SV AV1/2/DVD Back Jack Option
11 AFN Off Off

3.White Balance
No Item 21"FLAT Remark
1 Hight Light 275/265/45FL
2 Low Light 275/265/1.5FL

3-4 Samsung Electronics

 Alignment & Adjustment

Samsung Electronics 3-5

Alignment & Adjustment

3-4 Service Adjustment

3-4-1 Adjusting the Picture Size

■ Since the KS9C chassis has the deflection settings data within the Factory Data, the picture size has to be adjusted when
replacing Main Board, according to the following procedures.

② Press "Power Off →MUTE→1→8→2→Power On "

① Display the Lion pattern. using the remote control and enter Factory Mode.

④ Adjust the VA, VS,VSL and HS items so

③ Enter Deflection Mode. that the width becomes 5 and the height becomes 4.

3-6 Samsung Electronics

 Alignment & Adjustment

3-4-2 Adjusting the Picture Straight Lines

① Display the Cross Hatch pattern.

② Adjust settings other than VA,VH and HS so that straight lines are displayed without curves.

③ Adjust the V-Linearity and V-SC settings so that the

intervals of the horizontal lines become uniform.

④ When the adjustments are complete, display the Lion pattern and check that the picture size has not been changed.
If there is no change, finish the adjustments.

Samsung Electronics 3-7

Alignment & Adjustment

3-5 Replacements & Calibration

3-5-1 Adjusting the Focus

1. Display the CROSS Hatch pattern.

2. Turn the Focus clockwise to the optimal position.

3. Slowly turn the Focus clockwise so that the cross line is the most clearly displayed.

3-8 Samsung Electronics

 Alignment & Adjustment

3-5-2 Adjusting the Screen Voltage

1. Select "Power Off →MUTE→1→8→2→Power On " to enter Service Mode.

2. Turn to toshiba pattern

3. Use remocon come into " G2 Adjust" mode by hand or automatically.

4. Turn Screen VR of FBT and confirm the characters below changed to GREEN.

Samsung Electronics 3-9

Alignment & Adjustment

3-5-3 Adjusting the White Balance

1. Initialize all settings to the values appropriate to the corresponding model.

2. Select "Power Off → Mute →1 →8 →2 →Power On" to enter Service Mode.

3. Initialize all settings to the values appropriate to the corresponding model.

4. Display the Toshiba pattern and adjust the White Balance using CA100 with the coordinates of the corresponding model.

5. Enter Video Adjust1 of Service Mode. Adjust Low/Light.

- Adjust Sub Bright to set Y.
- Adjust B Cutoff to set y.
- Adjust R Cutoff to set x.

6. Enter Video Adjust1 of Service Mode. Adjust High/Light.

- Adjust Sub Contrast to set Y.
- Adjust B Drive to set y.
- Adjust R Drive to set x.

7. Check Low/Light and readjust it if its value has been changed.

8. If you have readjusted Low/Light, readjust High/Light until the two values are identical to the coordinates of the corresponding
model.

※ White Balance Standard Data

TSE
No Item Required Adjustment
21"SDI AK
High: x : 275 Low: x : 275
White Balance
1 White Balance y : 265 y : 265
(Standardization Applied)
Y : 45FL Y : 1.5FL
3-5-4 Check List for the Screen Voltage and White Balance Adjustment

1. The Screen Voltage and White Balance are connected each other, and both of them have to be configured to the correct values.

2. Adjust the White Balance after the Screen Voltage was adjusted, and check if the Screen Voltage is normal after adjusting the
White Balance.

3. If the White Balance is readjusted, check the Screen Voltage again.

4. When the adjustment is finished, check the following checklist.

- If there is a spot on the screen when turning the TV set off/on, adjust the Screen Voltage again.
- If there is a ghost line on the screen, adjust the Screen Voltage again.

3-10 Samsung Electronics