Sy75c PDF

Download as pdf or txt
Download as pdf or txt
You are on page 1of 8

ENERGY SAVING STAR,

LEADING THE INDUSTRY

P1
High Efficiency and Economy ,
Precise Control

P3
Luxurious and Comfortable
Operating Experience

P5
High Reliability And Durability
Scientific Structure and Easy Maintenance

P7
Equipment Specification

P9
Standard & Optional
SANY HYCRAULIC EXCAVATOR SY75C

Larger Counterweight Designed to Improve The


Overall Stability of Machine
With a larger counterweight designed on the basis of balancing
the wide gauge and undercarriage, the overall stability of
High Efficiency and machine is improved. By moving the center of gravity to the front,
we are able to achieve more reliability in SY75C-9.

Economy Precise Left and Right Side Doors and Covers That Can
Be Fully Opened
Control Rated Power Left and right side door and rear hood can be fully open, allow the
routine maintenance for engine, air-conditioning compressor belt
40.9kW/2100rpm tension and others.

4JG1-NABGB-04-C2 Powerful Digging Force Bucket Digging Force

Bucket digging force is up to 56kN from 56 38


53KN, and arm digging force up to 38kN KN
KN
from 35KN, as compared with SY75C1.
Powerful Engine Using Track Roller With The Bilateral Support As Arm Digging Force

Sany engine with four-cylinder four-stroke direct-injection Carrier Roller, SY75C-9 Achieves Higher Reliabil-
provides a stronger power for the excavator. ity And Stronger Traveling Force At High/low
Travel Speed
Auto Deceleration System Load-sensitivity Flow Distribu- Arm Cylinder
With advanced travel motor and optimized flow distribution
The function of auto deceleration reduces fuel consump- system, the machine can work more efficiently by traveling at tion System with Good Micro- Bucket Cylinder
Pilot
tion by 5-10%. When an operation has been stopped for high or low speed according to ground surface condition and operation Performance
3.5 seconds, the engine speed drops automatically to idle working area.
level and maintains the idling state. When the operation is Consisting of variable single pumps that
resumed by maneuvering the control levers, the engine Faster Operating Speed
provide a constant overall power, the Boom Cylinder
speed will increase to the set rpm within 0.1 second. The load-sensitivity flow distribution system Hydraulic Pump Main Valve
A quick return line is added to the arm oil cylinder circuit, which
working capability is restored instantly. The auto idle is of high stability and excellent micro-
has considerably improved the operating efficiency at low energy
switch is always active after the excavator is restarted operation performance, offering an
consumption.
each time. almost perfect meticulous process. Its
The advanced main valve, which has been thoroughly optimized, Swing Motor
is able to provide excellent coordinating and leveling performance superior performance lies in that flow
Filter Element in combined operations. It also increases the moving speed of demand is determined according to the Travelling Motor
arm and bucket. In addition to the arm regenerating function, the actuators and their corresponding
High precision pre-filtering removes the impurities, while actions. The operating accuracy is
operating efficiency of machine has been improved by more than
the two-stage filter and one-stage water separator ensure irrelevant to load. It is only related to the
10%, as compared with SY75C1.
the purity of engine fuel. deflection angle of control levers. The
Main pump delivery increases from 149 liters to 168 liters. Faster
speed is achieved in separate operation. optimization of main valve can realize Large-capacity Bucket and Excellent Near-body Perfor-
Environment-friendly Engine the coordination of multi-movement,
Optional Buckets mance
making different trajectories to meet the
With the exhaust emission in line with EPA interim requirements of delicate operation.
Tier2/EU Stage 3B Emission Standards, the engine is The standard bucket has a capacity of Bucket tips can be very close to the
environmentally friendly in the new era. 0.28m3, which has been redesigned to dozer blade, which makes the machine
reduce cutting resistance and enhance work efficiently within a wider working
Innovative Dozer Blade bucket strength. There are also many range.
Improve The Operating optional buckets available.
Working Efficiency Efficiency
UP Equipped with an innovative dozer blade
100 10% that has an increased magnitude of
moving up and down, this machine is
very suitable for the complex operating
110 conditions, such as road construction,
and burying pipelines or cables. The
(Compare with SY75C1) dozer blade has a special shape and a
wider plate that prevent soil from falling
behind, which considerably improves the
operating efficiency of excavating, landfill
and leveling.

1 2
SANY HYCRAULIC EXCAVATOR SY75C

Luxurious and Comfortable


Operating Experience
High-strength Top Plate
H B
The cab top plate, formed with high-strength thick steel sheet, is
well capable of ensuring operator’s safety against impact and
deformation.
L
Air-conditioner with Multiple Air Outlets at
Different Levels and Locations Anti-skid Steps, Large Hand-
High quality automatic air conditioner provides better Heavy duty mode: Full power output provides
holds, and Protective Railing
cooling effect. It creates a more comfortable operating efficient operation. on The Right of Cab
environment by automatically regulating the temperature Standard mode: 90% of the rated power reduces Specially designed mounting steps can
and humidity inside the cab as the ambient condition fuel consumption and noise. effectively prevent slippery; large hand-
changes. There are several air outlets – the front window Light duty mode: 80% of the rated power ensures fuel holds can prevent people from slipping;
defrost outlet ensuring operator’s visibility, and the outlets economy. Right railing of the cab increases the
for operator face, back and feet – which can be turned Break mode: 90% of the rated power reduces fuel safety.
on/off as desired. By changing the direction of air stream, consumption
the operator can fully enjoy the benefit of air conditioner.

Multi-functional Controller with a High


Innovative Cab for A Wider View Large Rear View Mirror and Alternate Exit
Well-sealed Cab, Clean and Quiet Brightness, Wide Viewing Angle LCD
Larger windows of the newly-designed spacious cab Display Rear view mirror is mounted on both sides of the cab, through
provide you a wider view. The operator can clearly see the
work equipment condition and the surrounding through the Equipped with excellent sealin- Multi-functional controller ensures the system constantly which the operator can observe the situation behind the excava-
front, side and back windows. The upper window of the gring, the cab is free from dust in the optimum condition. When the joysticks are not tor without turning back.
cab can be moved to the top of the cab when the front and rain. And the low-noise operated for 3.5 seconds, the controller immediately A cab window for alternate exit is also provided for operator to
window is unlocked. The roof hatch is openable, through design, indoor noise under 74 commands the engine to lower the speed in order to escape in case of emergency.
which the cab can have better ventilation and more lights. decibels, can effectively relieve reduce fuel consumption; when the engine or hydraulic
It is also helpful for you to talk with others outside the cab. the fatigue of operator. system is abnormal, the fault information will appear on
The control levers and joysticks designed and arranged the monitor to warn you. High brightness, wide viewing
according to human engineering are all within the reach of angle industrial LCD allows the operator easily getting the
operator. They can be operated easily with little force. information in the seat.
Silicone Rubber Shock Absorber
The operator station is suppo Muffler
Humanized Facilities -rted with innovative silicone
Thoughtful arrangement of built-in warm/cool storage box, rubber shock absorber. This The perfect match between engine and muffler reduces
cup holder, literature bag and ashtray. shock absorber is fixed to the the noise produced by exhaust emission. The adoption of
swing platform in four points, noise insulation material and improved damping system
which has minimized the shock gives better stability, noise reduction and operator
brought by rough road and comfort. Lined with heat insulation material, the muffler
engine or hydraulic impact, reduces not only the noise but also the temperature of
considerably increased the engine compartment.
stability of cab, and improved
the comfort of operator. SY75C-9 is fully
Access Door and Engine Hood Securing
covered with steel Bar
plates, which are
more environment The access door is designed with a hook, and the engine hood
Operating Priority and Fuel-savingPriority is fixed with a gas spring that can help you open the engine
friendly than toug
Working Modes hened glass and hood easily for engine service. The hood can be secured with
give better heat the bar during maintenance or service of the machine in order
The working mode can easily be changed on the
dissipation. to prevent injury caused by wind.
monitor

3 4
SANY HYCRAULIC EXCAVATOR SY75C

Higher Reliability and Durability Scientific Structure and


Easy Maintenance
Robot-welding Process Swing Platform
Robot-welding process can ensure the Reinforced plates, welded on the two main beam of swing platform, consider-
correct, strong and durable structure. ably improve the bending resistance performance. The right and left side Longer Maintenance Interval Maintenance Prompts
beams and the cross beam, made of high-class steel and formed through
punching, is designed in D-shaped structure and greatly strengthen the The use of quality, large-size parts and compo- Multi-functional controller can display the items to be
Reinforced Boom platform. nents can effectively extend machine service life maintained and the time for replacement
and maintenance intervals, reduce downtime,
Replace engine oil and oil filter element
The side plates are thicker than before. and improve operating efficiency. 50
service hours Check tightening torque of bolts and nuts
The ear plates have been redesigned to
reduce stress at the bending. The boom
has passed the fatigue test and field Add grease to the bearing of swing reducer assembly
digging test (soil and rock mixture). 250 Clean the primary filter element of air cleaner
service hours
Change engine oil and replace oil filter element
Replace engine fuel filter element

Large-capacity Fuel Tank


Fuel tank capacity up to 20L reduces the times for refueling.
Interior of the fuel tank has been treated well against rusting.
No rusting will occur even if the tank is soaked in oil containing
water or phosphoric acid, or other chemicals for a long period
of time.
Reinforced Bucket
The shape of bucket has been redesigned.
Using quality anti-wear plates with a Toolbox and Grease
thickness up by 33 percent as bucket
bottom, the durability of bucket is greatly
Bucket Storage Place
extended. No damage to the bucket is Toolbox and grease bucket storage
caused during field digging test (soil and place is designed to facilitate the daily
rock mixture). maintenance.

High-strength Track Frame Easy Cleaning of Radiator


The optimized support of dozer blade Opening the left rear access door
cylinder is welded to the upper and lower allows you to access the engine
plates in a gearing manner in order to have radiator. The radiator is protected with a
better strength and rigidity. net to prevent invasion of foreign
substances. You are only required to
remove and clean the net.
New parallel radiators with the specially
Undercarriage designed internal structure are easy to
flush. The excellent heat dissipating
Lateral beams using a box-type structure performance of radiator ensures the
with high strength and rigidity, have running of engine for a long period of
excellent torsion and bending resistant time.
performance.

Hoses
Bigger Side Doors for Easy Quality hoses, which are used for all
Maintenance and Replacement Hydraulic Cylinder Buffer high-pressure circuits, have excellent
wear resistance performance, extraor-
Opening the left door allows you to easily access the pilot oil source block, air A buffer provide at both ends of boom and bucket
dinary strength and brilliant resilience
cleaner, primary oil filter, and electrical parts, and to replace filter elements quickly. cylinders and at the rod end of bucket cylinder, can
that can help reduce maintenance work
Opening the left door allows you to easily check the main pump and hydraulic tank absorb the impact of the piston and the cylinder, extend
and extend service life. The hoses used
hoses. The side door area is 50 percent larger than that of last generation. cylinder service life, and reduce noise and vibration.
for low pressure application, which are
extremely flexible, can help reduce
turning radius and extend service life.

5 6
SANY HYCRAULIC EXCAVATOR SY75C

EQUIPMENT SPECIFICATION DIMENSION

SPECIFICATION
ENGINE OPERATING WEIGHT

Model.........................................................Isuzu 4JG1-NABGB-04-C2 Operating weight with standard bucket, fully serviced, +75 kg
Displacement..............................................................................3.059L operator (ISO)
Engine power Operating weight......................................................................7355kg
At rated engine speed...................................................40.9kw/2100rpm
UNDERCARRIAGE

HYDRAULIC SYSTEM Track width...............................................................................450mm


Number of track shoes.....................................................................39
Type........................................................................... Load Sensibility Carrier roller (per side).......................................................................1
Number of selectable working modes........................................... 4 Track roller(per side)..........................................................................5
Main pump
Item(Unit:mm) SY75C
Type...............................................Variable-capacity piston pumps
Maximum flow..................................................................149Itr/min A Length (During Transportation) 6120
TRANSMISSION
Hydraulic motors B Width 2220
Travel................................2* axial piston motor with parking brake Travel Speed (Highest/Lowest)........................................4.4/2.4 km/h C Height (During Transportation) 2665
Swing......................1* axial piston motor with swing holding brake Swing Speed...........................................................................11.5rpm D Upper Body Width 2040
Relief valve setting Gradeability.............................................................................70%/35
E Blade Height 405
Implement circuits.........................27.5mpa 269kg/cm2 3 ,988psi Ground Pressure.......................................................................33KPa
F Std. Track Width 450
Travel circuit..................................27.5mpa 269kg/cm2 3 ,988psi
G Track Gauge 1750
Swing circuit ...................................21.5mpa 210kg/cm2 3 , 118psi
Heavy lift circuit .............................27.5mpa 269kg/cm2 3 , 988psi DIGGING FORCE H Min. Ground Clearance 380
Pilot circuit ............................................3.5mpa 34kg/cm2 , 507psi I Tail Swing Radius 1800
Hydraulic cylinders Bucket Digging Force.................................................................56kN J Roller Gauge 2195
Boom...................................................................1-110mm*885mm Arm Digging Force.....................................................................38kN K Track Length 2820
Arm........................................................................1-90mm*900mm
Bucket....................................................................1-80mm*730mm

OPERATION RANGE

BUCKET OPTIONAL
Item(Unit:mm) SY75C
Capacity Width Arm length
a Max. Digging Height 7060
Weight Number of
Teeth b Max. Dumping Height 5550
SAE CECE Without Side Cutters With Side Cutters 1622mm 2050mm mm mm
c Max. Digging Depth 4020
0.16 0.14 450 570 173 3 d Max. Vertical Digging Depth 3290
0.18 0.16 500 620 186 4 e Max. Excavating Distance 6240
f Min. Swing Radius 1720
0.21 0.19 560 680 197 4
g Height at Min. Swing Radius 5550
0.25 0.22 650 770 218 4 h Maximum Ground Clearance of
Bulldozer Blade(rising) 350
0.28 0.25 680 795 247 4
i Maximum Sinking Depth of Bulldozer
0.28 0.25 720 Blade 360
836 240 5

0.32 0.28 800 922 224 5

Suitable for materials with density of 1 800 kg/m3 (3 030 lb/yd3) or less
Suitable for materials with density of 1 600 kg/m3 (2 700 lb/yd3) or less
Suitable for materials with density of 1 100 kg/m3 (1 850 lb/yd3) or less △ Materials and specifications are subject to change without further notice in accordance with our continuous technical innovations.Photos and illustrations may not include additional equipments.

7 8
SANY HYCRAULIC EXCAVATOR SY75C

SY75C LIFTING CAPACITY STANDARD & OPTIONAL


A
Arm Length:1622mm

Rating Over Front

B STANDARD EQUIPMENT
Rating Over Side

A MAX 2mm 3mm 4mm 5mm Engine Undercarriage Alarm Lights


B Maximum Travel brake Oil pressure lack, engine coolant
Alternator 30A
5m kg 3812 1500 1500 1700 1700 Dry thriple-filtering air cleaner Travel motor guard overheat
Cylindrical engine oil filter H-track guiding mechanism Throttle knob fault
4m kg 4564 1350 1200 1850 1850 1800 1500
Fuel pre-filter Hydraulic track tensioner Fuel oil lack
3m kg 5008 1250 1050 3200 3200 2300 2200 1800 1450 1300 1050 Bolted sprocket Voltage higher than specification
Radiator with protective screen
2m kg 5225 1150 950 2650 2100 1750 1400 1250 1000 Auxiliary water tank for radiator Carrier roller and track roller Engine over speed
Fan cowl Reinforced track link with pin seal
1m kg 5243 1150 900 2550 1950 1650 1400 1250 1000
Separately installed engine 450 mm track shoe
0m kg 5065 1200 950 2450 1900 1650 1300 1200 950 Bottom coverplate
Water separator
-1m kg 4668 1300 1050 4350 3600 2450 1900 1600 1300
Indicator Lights
-2m kg 3986 1650 1300 4450 3650 2450 1900 Auto-idle、engine warm up
Swing Platform Engine coolant temperature
Operator Station Hi/Lo speed
Under Any Condition,the lifting capacity should be under 1000kg Fuel level float
Noiseproof steel-structured cab
Hydraulic oil level gauge
Toughened light-color window
Pressure and Capacities 4 sillicone rubber damping support
Toolbox
Monitoring System
Rear view mirror (R)
Openable roof hatch, upper front windo
Swing brake Standard battery
WELGHTS AND GROUND PRESSURE and left window
Grease barrel holder Lockup engine hood
Rear window,alternate exit
Counterweight Lockup fuel filler cap
Mode SY75C9I2H silent window wiper with washer
Adjustable inclined seat with adjustable Anti-skid film, handhold and passage
Shoe type Shoe width
Operating weight Ground pressure armrest Travel direction mark
AM-FM radio with digital clock Front Work Equipment Hand grease gun
450mm 7280Kg 33Kpa Foot rest and floor mat
Tripe grouser Flange pin
Loudspeaker,rear view mirror
Bucket clearance adjustment
Seat belt and fire extinguisher
Welded lever
Cub holder and cab light
Central lubrication system
Ashtray
Dust ring-seal of bucket pin
Storage box, literature bag
SERVICE REFILL CAPACITIES A variety of bucket for optional
Hydraulic lockout control
Fully automatic air-conditoner
Liters US gal Lmp gal
Fuel tank.................................................................... 130 34.2 28.6
Engine coolant............................................................. 12 3.2 2.6 Hydraulic System
Engine oil...................................................................... 9.2 2.4 2.0
Control valve with main relief valve
Swing device............................................................... 1.5 0.4 0.3 Spare oil port for control valve
Travel device(each side)............................................... 1.3 0.3 0.3 Oil suction filter
Hydraulic system.......................................................... Oil return filter
/ / / Pilot filter
Hydraulic oil tank.......................................................... 120 31.6 26.4

9 10
B06S2ENAM1-SY75C TIER2

You might also like