P&V - Demolição Pesada

Demolition
Tools Introduction
Our manufacturing experience on Demolition Tools covers a period of over thirty years, throughout which we have continued to
develop high quality tools for an ever-demanding marketplace.
P&V has one quality - the best. All tools are totally manufactured and processed within our modern factory, utilising the very latest
machinery and technology, which ensures that our finished products comply with the high standards of quality expected by our
customers worldwide. We operate a Quality Management System which is certified to BS EN ISO9001 standard.
Our Demolition Tools are manufactured from specially selected steel specifications which have been evolved from a rigorous
research and development programme. We continually investigate refinements to specifications and processes, to ensure that our
quality leads the market.
P&V's in-house Heat Treatment Plant is one of the largest of its kind in Europe and enables us to closely control and monitor all
aspects of the unique processes we have developed.
The result is a range of quality Demolition Tools that have the hardness, impact strength and durability required to combat the most
arduous conditions experienced in demolition, trenching, road construction, quarrying and mining applications.
P&V's Demolition Tools are acknowledged by many major OEMs as the best independently produced tools available worldwide.
One quality - the best.
Contents Page Page

Introduction 1 Krupp 31-34
Warranty 2 Montabert 35-39
Tools Selection 2 MSB 40-42
Care and Use 3 NPK 43-47
Catalogue Numbering System 4 Rammer 48-52
Chisel Orientation 4 Rotair 53
Machine Index 5 Socomec 54-55
Hammer Type & Tool Reference Index 6-12 Soosan 56-58
Atlas Copco 13-17 Toku 59-61
Furukawa 18-21 Toyo 62-64
Hanwoo 22-23 Other Manufacturers Reference Index 65-66
Indeco 24-27 Warranty Guide 67-68
Italdem 28-30
1
Warranty
Padley & Venables’ tools are guaranteed against defects in raw material and manufacture. No other
warranty is implied or expressed. The company’s liability in respect of any warranty claims is limited to
replacement and does not extend to any other expenditure incurred or to any consequential damage.
Warranty claims are subject to immediate notification of any problems and return of the goods to P&V
under their returned goods system. See pages 67 & 68 for our full warranty details
Tools Selection
Correct selection of tools is the first step in obtaining maximum life from the product.
Conical Point - for general Wide Chisels - for increased

demolition work where productivity in softer materials.
penetrative breaking is required. Tarmac Cutters - as Wide
Chisels but with 90 degree
orientation for cuttting/trenching.
Pyramid Points - for use where Rail Guard - for driving in rail
increased breakout forces are guards.
required
X Type Point - for use in soft or Blunts - for impact breaking, eg.
high dust operations. secondary breaking and also
scaling in mines and tunnels, etc.
Power Point - tool with hard core Upset Blunt - Blunt with
for use in very hard and abrasive increased diameter at working
conditions. end to give increased life and
wear resistance.
Chisels - as for Points but also

Rammer Stems & Pads - for
where a cutting action is required,
compacting loose ground.
eg. trenching and benching
Note: Chisels give higher wear rates and
stress levels in the retainer flat areas of
the tool.
Grooved Chisel - for use in soft or

high dust operations. Driving Tool - for driving in posts,
pipes etc.
2
Care and Use
Working Angle
Critical to tool life is using the tool at the correct working angle of 90° to the working surface.
Failure to do this will result in high contact pressure between the tool and the bushings and the
likelihood of galling between the surfaces. In turn this can lead to premature failure of the tool plus
damage and rapid wear to the bushings. Worn bushings can allow the tool to be angled over to a
position where the striking face is hit at an angle by the piston.
Lubrication
Lubrication of the tool/bushing with the correct quality high temperature/high pressure grease at
regular intervals is essential. Such greases are best able to cope with the extreme contact
pressures generated by an incorrect working angle, leverage and excessive bending etc.
USE OF CHEAP SUBSTITUTES (OR NO GREASE AT ALL) IS FALSE ECONOMY AND WILL
RESULT IN PREMATURE TOOL FAILURE.
Blank Firing
Continuing to use the hammer when the tool is not or only partially in contact with the work surface
will result in the tool being fired down on to the retainer pin. This will cause heavy wear and
damage to the upper retainer flat radius area and the retaining pin itself.
Tools should be examined regularly, eg. every 40 hours for damage in this area which should then
be ground out.
At the same time as the tool is examined the opportunity should be taken to check the tool
bushings for wear and damage with a view to replacement or reconditioning as necessary.
Overheating
Avoid continuous working in one position. Do not strike in one spot for more than 10 - 15 seconds
before changing the tool to another position. Failure to do this can lead to excessive heat build-up
at the working end with ‘mushrooming’ as a consequence.
Leverage/Bending
Using the tool as a lever to help break the ground is a common tool breaker. Avoid leverage and
excessive bending at all times.
Loose running
Keep the boom and hammer feed sufficient to ensure that the tool is held against the hammer
shoulder stop, at all times when working.
Tool Reconditioning
Under most normal conditions the tool will not need reconditioning. However, tools that have lost
their shape on the working end can cause high stresses throughout the tool and hammer.
Reconditioning by milling or turning is recommended. Welding or flame cutting is not
recommended as the heat generated could cause structural changes within the material which in
turn can lead to premature failure or rapid wear.
3
Catalogue Numbering System
All catalogue numbers start with the letter ‘D’, followed by a 3 digit number, which is the P&V
designation for the hammer type, eg. D001-0410P.
The second section defines the tool length and type, eg.D001-0410P. The first 4 digits eg. 0410
represent the tool length in millimetres, whilst the working end configuration is defined by a letter:
‘P’ = Point (Conical) ‘WC’= Wide Chisel, followed by blade width, eg. D001-0410WC-120
‘C’ = Chisel ‘TC’ = Tarmac Cutter (in-line wide chisel) eg. D001-0410TC-120
‘B’ = Blunt
‘PP’ = Pyramid Point
‘XP’ = ‘X’ point
‘GC’ = grooved chisel
‘BU’ = blunt upset
‘CT’ = Power Point
For correct selection of tool types see page 2
Note: For special tools such as Railguards, Rammer Stem & Pads and Driving Tools, please contact
our sales office.
Chisel Orientation
Transverse (East/West) have the blade of the tool transverse In-Line (North/South) have the chisel tool blade “In-Line”
to the axis of the carrier boom when mounted. (parallel) to the axis of the carrier boom.
All standard chisels and wide chisels have the blade All in-line chisels and tarmac cutters have the blade
in the transverse mode. in the “in-line” mode.
4
Machine Index
Machine Page Machine . Page
ARDEN 65 MONTABERT 35-39
ARROWHEAD 46, 65 MSB 40-42
ATLAS COPCO 13-17 NPK 43-47
BERCO 13 OCM 35-36
BOBCAT 65 O&K 48-52
CASE 48-51 OKADA 66
CATERPILLAR 48-52 OMAL 35, 53
CHICAGO PNEUMATIC 13, 16-17, 33-34 OMD 35
DAEMO 65 PEL-JOB 53
D&A 65 PROMOVE 35-36
DEHACO 62-64 RAMMER 48-52
DRAGO 59-60 ROTAIR 53
EURORAM 24-27 SOCOMEC 54-55
FURUKAWA 18-21 SOOSAN 56-58
GEHL 53 STANLEY 56-58, 66
HANWOO 22-23 STAR 28-29, 35-36
HUSKIE/IZUMI 65 TABE 66
IDROMECCANICA 35 TAKEUCHI 62-64
INDECO 24-27 TELEDYNE 59-61
ITALDEM 28-30 TOKU 59-61
JCB 48-52 TOPA 66
JKHB 62-64 TOYO 62-64
KRUPP 31-34 VIBRARAM 66
KUBOTA 48 VOLVO 48-52
LIFTON 65 WIMMER 40-41
5
Hammer Type & Tool Reference Index
Machine Fig. No. Page Machine Ref. No. Page
ARDEN ATLAS COPCO - cont.

AB100 275 65 TEX 1400H 16 15
AB150/210 276 65 TEX 1800H/2000H 17 15
AB280/350 277 65 –––––––––––––––––––––––
AB450 279 65 BERCO
AB1050 280 65 BB42 1 13
––––––––––––––––––––––– BB52 2 13
ARROWHEAD BB62 3 13
S20 281 65 BB70 4 13
S30 282 65 BB80 5 13
S40 283 65 –––––––––––––––––––––––
S60 284 65 BOBCAT
B300 126 36
2T 176 46 B500 127 36
4T 178 46 580 137 38
6T 179 46 680 138 38
10T 285 65 B700 128 37
22T 286 65 B850/B950 129 37
––––––––––––––––––––––– 880 139 38
ATLAS COPCO 980 140 39
PB110 1 13 1250 329 65
PB160 2 13 1560 330 65
PB210 3 13 1750 187 48
PB310 4 13 2500/2570/3560 331 65
PB420 5 13 5500 332 65
6560 333 65
SB50,SBC 60 6 13 –––––––––––––––––––––––
SB100,SBC 115 7 14 CASE
SB150,SBC 255 8 14 CB140 187 48
SB200,SBC 410 9 14 CB200 188 48
SB300,SBC 610,SBC650 10 14 CB370 189 48
SB300 SCALER 11 14 CB620 190 48
SB450,SBC 800/850 14 15 CB735 192 49
CB1150 193 49
MB500 19 16 CB1450 203 50
MB700, MB800 20 16 CB2850 205 51
MB1000 21 16 CB3750 206 51
MB1200 22 16 CB4000 207 51
MB1700 23 16 CB5200 208 51
–––––––––––––––––––––––
HB2200 24 16 CATERPILLAR
HB3000 25 17 CAT H45FT 187 48
HB4200 26 17 CAT H50FT 188 48
HB5800 27 17 CAT H63/H63FT 189 48
HB7000 28 17 CAT H70/H70FT 190 48
CAT H90/H90FT 192 49
HBC 1100/1700 15 15 CAT H100/H100FT 193 49
HBC 2500 16 15 CAT H115s 203 50
HBC 4000 17 15 CAT H120s 205 51
HBC 6000 18 15 CAT H130s 206 51
CAT H140As 199 50
TEX 30H 6 13 CAT H140Cs/H140Ds 207 51
TEX 75H/100H 7 14 CAT H160As 200 50
TEX 110H 8 14 CAT H160Cs/H160Ds 208 51
TEX 180H 9 14 CAT H180s 209 51
TEX 250H 12 14 CAT H180Ds 210 52
TEX 250H SCALER 13 15 CAT H195 211 52
TEX 400H 14 15 –––––––––––––––––––––––
TEX 600H/700H/900H 15 15
6
Machine Fig. No. Page Machine Fig. No. Page
CHICAGO PNEUMATIC (CP) EURORAM - contd.

CP100 1 13 RM80 67 24
CP150 2 13 RM85/90 70 25
CP200 3 13 RM110 71 25
CP300 4 13 RM115 72 25
CP400 5 13 RM120 73 25
CP550 5 13 RM130 74 26
CP750 105 32 RM140 75 26
CP1150 108 33 RM145 76 26
CP1550 110 33 RM150 77 26
CP2250 112 34 RM160 78 27
CP3050 114 34 RM180 79 27
CP4250 115 34 RM195 80 27
––––––––––––––––––––––– –––––––––––––––––––––––
DAEMO FURUKAWA
DMB S500 287 65 F1 29 18
DMB S1300 288 65 F2 30 18
DMB S1800 289 65 F3 31 18
DMB S2200 290 65 F4 32 18
DMB S3000 291 65 F5 33 18
DMB S3600 292 65 F6 34 18
––––––––––––––––––––––– F9 35 19
D&A F12 36 19
8V 275 65 F19 37 19
15V/20V 276 65 F22 38 19
30V/50V 277 65 F27 39 19
70V 278 65 F35 40 19
130V 280 65 F45 41 20
180V 293 65 F70 42 20
–––––––––––––––––––––––
DEHACO HB1G 43 20
DHB 35 261 62 HB2G 44 20
DHB 55 262 62 HB3G 45 20
DHB 75 263 62 HB5G 46 20
DHB165 264 62 HB8G 47 21
DHB 305 266 63 HB10G 48 21
DHB 405 267 63 HB15G 49 21
DHB 805 268 63 HB20G 50 21
DHB 1250 269 63 HB30G 51 21
DHB 1305 270 63 HB40G 52 21
DHB 1605 (1405) 271 64 –––––––––––––––––––––––
DHB 2305 272 64 HANWOO
DHB 3205 (4105) 273 64 RHB 301-V 53 22
––––––––––––––––––––––– RHB 302/303-V 54 22
DRAGO RHB 303 55 22
DRH 80 246 59 RHB 305-V 56 22
DRH120 247 59 RHB 308-2/309 57 22
DRH150 248 59 RHB 313-V 58 22
DRH180 249 59 RHB 322-2/325 59 23
DRH280 250 59 RHB 328-2/330 60 23
DRH650S/900 251 60 RHB 340 61 23
DRH1150S/1600S 252 60 –––––––––––––––––––––––
DRH1900 253 60 HUSKIE/IZUMI
––––––––––––––––––––––– HH100 294 65
EURORAM HH150 295 65
RM45 62 24 HH300 296 65
RM48 63 24 HH500 297 65
RM56 64 24 HH750 298 65
RM65 65 24 HH1000 299 65
RM75 66 24 HH2000 300 65
7
HUSKIE/IZUMI - contd. INDECO - contd.

HH3600 301 65 UP900 69 25
HH4500 302 65 UP1200 70 25
––––––––––––––––––––––– UP1500 71 25
IDROMECCANICA UP1750 72 25
IMI 85 118 35 UP2000 73 25
IMI 260 120 35 UP2500 74 26
IMI 600 121 35 UP3000 75 26
IMI 1000 122 35 UP3500 76 26
––––––––––––––––––––––– UP4000 77 26
INDECO UP5000 78 27
HB5 65 24 UP7000 79 27
HB8 67 24 UP8500 80 27
HB12 70 25 –––––––––––––––––––––––
HB19 71 25 ITALDEM
HB27 73 25 GK 85/86 81 28
GK 160/161 82 28
HP150 62 24 GK211 83 28
HP200 63 24 GK 290/291 84 28
HP350 64 24 GK 360/361 85 28
HP500 65 24 GK 600/610 86 29
HP600 66 24 GK 950/960 87 29
HP700 68 25 GK 1350 88 29
HP900 69 25 GK1351S 89 29
HP1200 70 25 GK 1600 90 29
HP1500 71 25 GK 2400 91 30
HP1800 72 25 GK 3400/3500 92 30
HP2000 73 25 GK3800 93 30
HP2500 74 26
HP3000 75 26 K 80 118 35
HP3500 76 26 K 270 120 35
HP4000 77 26 K 550 121 35
HP5000 78 27 K 1000 122 35
HP7000 79 27 K 1030 124 36
HP9000 80 27 K 1300 125 36
–––––––––––––––––––––––
MES 121/150 62 24 JCB
MES 180/181/200 63 24 JCB HM160 187 48
MES 300/301/350/351 64 24 JCB HM260 189 48
MES 451/452/462/521/550 65 24 JCB HM360 190 48
MES 553 66 24 JCB HM550 192 49
MES 601/621/650 68 24 JCB HM850 193 49
MES 1200 70 25 JCB HM1050 203 50
MES 1500 71 25 JCB HM1150 202 50
MES 1750/1800 72 25 JCB HM1350 205 51
MES 2000 73 25 JCB HM1450 204 51
MES 2500 74 26 JCB HM1750 206 51
MES 3000 75 26 JCB HM2350 207 51
MES 3500 76 26 JCB HM2950 208 51
MES 4000 77 26 JCB HM3850 209 51
MES 5000 78 27 JCB HM3950 210 52
MES 7000 79 27 –––––––––––––––––––––––
MES 8500 80 27 JKHB
JKHB 31 261 62
UP121/150P 62 24 JKHB 51 262 62
UP181/200P 63 24 JKHB 71 263 62
UP301/350P/351P 64 24 JKHB 101 264 62
UP462/521/550P 65 24 JKHB 301 266 63
UP553 66 24 JKHB 401 267 63
UP621/650P 68 25 JKHB 801 268 63
8
JKHB - contd. MONTABERT - contd.

JKHB 1101 269 63 BRH501/570 122 35
JKHB 1401 270 63 BRH620 123 36
JKHB 1600 271 64 BRH625 124 36
JKHB 2000 272 64 BRH750 125 36
JKHB 3000 273 64 30 126 36
––––––––––––––––––––––– 50/50SMS 127 36
KRUPP 70/70SMS 128 37
AT20 1 13 85/85SMS/90/90SMS 129 37
AT70 2 13 125SX 130 37
AT120 3 13 140/140SMS/150/150SMS 131 37
AT170 4 13 300/300MS 132 37
AT220 5 13 700/700SMS 133 37
900/900MS 134 38
HM50/55 94 31 1200/1200SMS 135 38
HM60V 95 31
HM60/75 96 31 SILVER CLIP 08 (SC08) 136 38
HM85/90/90V 97 31 SILVER CLIP 12 (SC12) 137 38
HM130/140V 98 31 SILVER CLIP 16 (SC16) 138 38
HM185/190V 99 31 SILVER CLIP 22 (SC22) 139 38
HM200 100 32 SILVER CLIP 28 (SC28) 140 39
HM220/230 101 32 V32/V32SMS 141 39
HM300/301/305 102 32 V43 142 39
HM350/350V 103 32 V53 143 39
HM550/560V 104 32 –––––––––––––––––––––––
HM580 105 32 MSB
HM600/601 106 33 MS200 144 40
HM680 21 16 MS250 145 40
HM700/701/702/705 107 33 MS300 146 40
HM710/720 108 33 MS400 147 40
HM780 109 33 MS450 148 40
HM950/960 110 33 MS500 149 41
HM1000 111 33 MS600(NEW) 150 41
HM1500MV 112 34 MS700 151 41
HM2000MV 113 34 MS800 152 41
HM2100/2300 114 34 MS900 153 41
HM2500MV/2600 115 34
HM3000 116 34 SAGA 1000 154 42
HM4000 117 34 SAGA 1500 155 42
––––––––––––––––––––––– SAGA 2000 156 42
KUBOTA –––––––––––––––––––––––
KXB 300/350 186 48 NPK
KXB 400/BTB400 187 48 E-102 157 43
KXB 450 188 48 E-106 158 43
KXB 500 189 48 E-200 159 43
KXB 600 190 48 E-201 160 43
––––––––––––––––––––––– E-202 161 43
LIFTON E-203 162 43
LH70/80 303 65 E-204 163 44
LH110 304 65 E-205 164 44
LH170 305 65 E-206 165 44
LH360 306 65 E-207 166 44
LH500 307 65 E-208A 167 44
LH1000 308 65 E-210 168 44
––––––––––––––––––––––– E-213 169 45
MONTABERT E-216 170 45
BRH40 118 35 E-220 171 45
BRH76/91 119 35 E-225 172 45
BRH125 120 35 E-240A 173 45
BRH250/270 121 35
9
NPK - contd. OMAL

GH10 174 45 OMAL 80 118 35
OMAL 80S 216 53
H-06X 175 46 OMAL 270 120 35
H-08XA 176 46 OMAL 500 121 35
H-1XA 177 46 OMAL 1000 122 35
H-2XA/E 178 46 –––––––––––––––––––––––
H-3XA/E 179 46 OMD
H-4X 180 46 OMD 8 118 35
H-6XA 181 47 OMD 30 120 35
H-7XA 182 47 OMD 50 121 35
H-8XA 183 47 OMD 100 122 35
H-10XB/E 184 47 –––––––––––––––––––––––
H-12X/E 185 47 PEL-JOB
––––––––––––––––––––––– MH90 216 53
OCM MH95 217 53
OCM8 118 35 MH130/160 218 53
OCM25 120 35 MH180/260 219 53
OCM55 121 35 –––––––––––––––––––––––
OCM100 122 35 PROMOVE
OCM130 125 36 P22 124 36
––––––––––––––––––––––– PMV90/P3SH 118 35
O&K
H32 187 48 PMV290/390/P12SH 120 35
H45 188 48 PMV690/P16SH 121 35
H65 189 48 PMV1000/P23SH 122 35
H85 190 48 PMV1390/P27SH 125 36
H120 192 49 –––––––––––––––––––––––
H150 193 49 RAMMER
H200 203 50 S18/PICCOLO 186 48
H260 205 51 S21 187 48
H310 206 51 S22 188 48
H380 207 51 S23 189 48
H530 208 51 S25 190 48
H700 210 52 S26 191 48
––––––––––––––––––––––– S27
S29
192
193
49
49
OKADA
OKB/UB 301 309 66 S52 194 49
OKB/UB 301SL 310 66 S54 195 49
OKB/UB 302 311 66 S55 196 49
OKB/UB 302A 312 66 S56 197 49
OKB/UB 303A 313 66 S82 198 50
OKB/UB 304 314 66 S83 199 50
OKB/UB 304B 315 66 S84 200 50
OKB/UB 305 316 66 S86 201 50
OKB/UB 308 317 66 E63 202 50
OKB/UB 310 318 66 E64 203 50
OKB/UB 312B 319 66 E65 204 51
OKB/UB 316 320 66 E66 205 51
OKB/UB 318 321 66 E68 206 51
UB 2 322 66 G80 207 51

UB 4 323 66 G90 208 51
UB 5 324 66 G100 209 51
UB8 325 66 G110 210 52
UB11 326 66 G120 211 52
UB14 327 66 G130 212 52
UB17/OKB17A2 328 66 M14 213 52
–––––––––––––––––––––––
M18 214 52
10
ROTAIR STAR
OL50 215 53 SH40 118 35
OL90 (WITH COLLAR) 216 53 SH91 81 28
OL 90/95 217 53 SH151 82 28
OL 130/160 218 53 SH200 83 28
OL 180/260 219 53 SH280 120 35
OL 250/330 220 53 SH281 84 28
––––––––––––––––––––––– SH560 121 35
SOCOMEC SH561 86 29
DMS 50 221 54 SH990 122 35
DMS 95 222 54 SH991 87 29
DMS 160 223 54 SH1200 124 36
DMS 220 224 54 SH1400 125 36
DMS 330 225 54 SH1402 89 29
DMS 430 226 54 –––––––––––––––––––––––
DMS740 227 55
MD0 550 228 55 TABE
MD0 750 229 55 AGB 100/175/200 341 66
MD0 1450 230 55 AGB 270/275/350/375 342 66
MD0 1950 231 55 AGB 400/475 343 66
––––––––––––––––––––––– AGB 700/701/750 344 66
SOOSAN AGB 1000/1300/1301 345 66
SB10 232 56 AGB 1600/1620 346 66
SB20 233 56 AGB 1800 347 66
SB30 234 56 –––––––––––––––––––––––
SB40 235 56 TAKEUCHI
SB43 236 56 TKB-31 261 62
SB45 237 56 TKB-51 262 62
SB50 238 57 TKB-71 263 62
SB60 239 57 TKB-101 264 62
SB81 240 57 TKB-201 265 62
SB100 241 57 TKB-301 266 63
SB121 242 57 TKB-401 267 63
SB130/140 243 58 TKB-801 268 63
SB151 244 58 TKB-1101 269 63
––––––––––––––––––––––– TKB-1401 270 63
STANLEY TKB-1600 271 64
MB 125 329 66 TKB-2000 272 64
MB 156 330 66 TKB-3000 273 64
MB 250/256/350/356 331 66 –––––––––––––––––––––––
MB 506 235 56 TELEDYNE
MB 550 332 66 TB100 245 59
MB 656/675/695 333 66 TB120/125 246 59
MB 800/856 334 66 TB180/225 247 59
MB 1550 335 66 TB220/325 249 59
MB 1950/1975 336 66 TB275 248 59
MB 2950/2975 337 66 TB400/425 /625 250 59
MB 3950 338 66 TB700/725/750/825 251 60
––––––––––––––––––––––– TB830 255 60
MB20EX 237 56 TB900/925/975/1000/1025 252 60
MB30EX 238 57 TB980 256 61
MB40EX 239 57 TB1300/1425 253 60
MB50EX 240 57 TB1680 258 61
MB70EX 242 57 TB1825/2075 254 60
MB80EX 243 58 TB2580 260 61
MB100EX 244 58 –––––––––––––––––––––––
––––––––––––––––––––––– TB2080 259 61
11
TOKU VOLVO
TNB 08E/1M 245 59 HB80 186 48
TNB 1E/2M 246 59 HB130 187 48
TNB 2E/3M 247 59 HB200 188 48
TNB 3E/4M 248 59 HB300 189 48
TNB 4E/5M 249 59 HB440 190 48
TNB 6E/7M 250 59 HB600 192 49
TNB 7E/10E 251 60 HB800 193 49
TNB 14E/16E 252 60 HB1100 202 50
TNB 22E/23E 253 60 HB1400 204 51
TNB 30E/31E 254 60 HB1700 206 51
TNB 100 255 60 HB2400 207 51
TNB 150 256 61 HB3200 208 51
TNB 190 257 61 HB3800 210 52
TNB 230 258 61 –––––––––––––––––––––––
TNB 310 259 61 WIMMER
TNB 400 260 61 W-220 144 40
––––––––––––––––––––––– W-330 146 40
W-440 147 40
TOPA W-550 149 41
TOPA 70 348 66 W-770 151 41
TOPA 100 349 66 W-880 152 41
TOPA 200 350 66 W-990 153 41
TOPA 300 351 66
TOPA 500 352 66
TOPA 1000 353 66
TOPA 1400 354 66 ADDENDUM
TOPA 1500 355 66
––––––––––––––––––––––– GEHL
TOYO G50S 215 53
THBB 31 261 62 G95S 217 53
THBB 51 262 62 G160S 218 53
THBB 71 263 62 G260S 219 53
THBB 101 264 62 G330S 220 53
THBB-201 265 62
THBB 301 266 63
THBB 401 267 63
THBB 801 268 63
THBB 1101 269 63
THBB 1401 270 63
THBB 1600 271 64
THBB 2000 272 64
THBB 3000 273 64
–––––––––––––––––––––––
VIBRARAM
VRH-50 295 66
VRH-60 296 66
VRH-75 298 66
VRH-90 299 66
VRH-115 300 66
VRH135 301 66
VRH-145 302 66
–––––––––––––––––––––––
12
ATLAS COPCO
TYPE LENGTH
LENGTH CATALOGUE
CATALOGUE WEIGHT
WEIGHT
MMMM NUMBER
NUMBER KGS KGS
Figure
No.
1 Atlas Copco PB110

Berco BB42, Chicago Pneumatic CP100, Krupp AT20 Point 470 D062-0470P 4
27 58 Chisel 470 D062-0470C 4
ø42
29
2 Atlas Copco PB160

34 70 Chisel 600 D063-0600C 8
ø52
40
3 Atlas Copco PB210

44 86 Chisel 700 D064-0700C 14
47 ø62
4 Atlas Copco PB310

64 86 Chisel 750 D065-0750C 21
54 ø70
5 Atlas Copco PB420

Berco BB80, Chicago Pneumatic CP400/550, Krupp AT220, HM220/230
83 92 Point 900 D061-0900P 29
Chisel 900 D061-0900C 29
ø80
61
6 Atlas Copco SB50

Atlas Copco SBC60, Tex30H Point 430 D233-0430P 2
166 Chisel 430 D233-0430C 2
51 50 ø48
21 ø32 ø32
13
ATLAS COPCO
TYPE LENGTH CATALOGUE WEIGHT
MM NUMBER KGS
Figure
No.
7 Atlas Copco SB100

Atlas Copco SBC115, TEX75H / 100H Point 550 D222-0550P 5
200 Chisel 550 D222-0550C 5
33 95 ø60
33 ø45 ø45
8 Atlas Copco SB150

Atlas Copco SBC255, TEX110H Point 550 D230-0550P 7
45 99 Chisel 550 D230-0550C 7
35 ø50
9 Atlas Copco SB200

Atlas Copco SBC410, TEX180H Point 600 D229-0600P 13
45 100 Chisel 600 D229-0600C 13
47 ø65
10 Atlas Copco SB300

Atlas Copco SBC610, SBC650 Point 800 D232-0800P 27
50 103 Chisel 800 D232-0800C 27
Blunt 800 D232-0800B 27
57 ø80
11 Atlas Copco SB300 Scaler

Blunt 800 D235-0800B 28
375
50 103 ø99
57 ø80 ø79
12 Atlas Copco Tex 250H

Point 800 D224-0800P 27
73 107 Chisel 800 D224-0800C 27
48
57 ø80
14
ATLAS COPCO
MM NUMBER KGS
Figure
No.
13 Atlas Copco Tex 250H Scaler

Blunt 800 D224-0800B 28
375
73 107 ø98
56
57 ø80 ø80
14 Atlas Copco SB450

Atlas Copco SBC800/850, Tex 400H Point 840 D231-0840P 43
90 121 Chisel 840 D231-0840C 43
Blunt 840 D231-0840B 43
65 ø95
15 Atlas Copco HBC1100/1700

Atlas Copco Tex 600H, 700H, 900H Point 900 D226-0900P 60
105 150 Chisel 900 D226-0900C 60
Blunt 900 D226-0900B 60
70 ø105
16 Atlas Copco HBC2500

Atlas Copco Tex 1400H Point 1000 D227-1000P 95
92 168 Chisel 1000 D227-1000C 95
Blunt 1000 D227-1000B 95
85 ø125

Atlas Copco Tex 1800H/2000H Point 1100 D228-1100P 119
Chisel 1100 D228-1100C 119
100 165
Blunt 1100 D228-1100B 119
95 ø135

Point 1500 D234-1500P 245
130 216 Chisel 1500 D234-1500P 245
Blunt 1500 D234-1500B 245
120 ø170
15
ATLAS COPCO
MM NUMBER KGS
Figure
No.
19 Atlas Copco MB500

Krupp HM350 Point 900 D051-0900P 36
110 140 Chisel 900 D051-0900C 36
62
ø90
69
20 Atlas Copco MB700/MB800

Krupp HM580, Chicago Pneumatic CP750 Point 1000 D058-1000P 55
95 115 Chisel 1000 D058-1000C 55
Blunt 1000 D058-1000B 55
ø100
80

Krupp HM680 Point 1050 D067-1050P 61
85 185 Chisel 1050 D067-1050C 61
Blunt 1050 D060-1050B 61
75 ø109

Krupp HM780 Point 1150 D059-1150P 94
117 165 Chisel 1150 D059-1150C 94
Blunt 1150 D059-1150B 94
81 ø120

Krupp HM1000 Point 1200 D053-1200P 137
98 222 Chisel 1200 D053-1200C 137
Blunt 1200 D053-1200B 137
101 ø140
24 Atlas Copco HB2200

150 270 Chisel 1300 D055-1300C 178
Blunt 1300 D055-1300B 178
111 ø150
16
ATLAS COPCO
MM NUMBER KGS
Figure
No.

151 319 Chisel 1500 D060-1500C 223
Blunt 1500 D060-1500B 223
111 ø165

182 338 Chisel 1500 D057-1500C 300
Blunt 1500 D057-1500B 300
131 ø180

Krupp HM3000 Point 1700 D066-1700P 405
161 410 Chisel 1700 D066-1700C 405
Blunt 1700 D066-1700B 405
135 ø200

Krupp HM4000 Point 1800 D052-1800P 458
160 347 Chisel 1800 D052-1800C 458
Blunt 1800 D052-1800B 458
141 ø210
17
FURUKAWA
MM NUMBER KGS
Figure
No.
29 Furukawa F1/HB1G
Point 400 D138-0400P 2
27 51 Chisel 400 D138-0400C 2
ø36
27
30 Furukawa F2/HB2G
Point 450 D139-0450P 3
32 61 Chisel 450 D139-0450C 3
ø45
32
31 Furukawa F3
Point 525 D140-0525P 5
36 67 Chisel 525 D140-0525C 5
ø52
39
32 Furukawa F4
Point 560 D160-0560P 12
45 71 Chisel 560 D160-0560C 12
ø60
45
33 Furukawa F5
Point 600 D161-0600P 15
50 80 Chisel 600 D161-0600C 15
ø68
50
34 Furukawa F6
Point 730 D162-0730P 21
96 80 Chisel 730 D162-0730C 21
45
50 ø75
18
FURUKAWA
MM NUMBER KGS
Figure
No.
35 Furukawa F9
Point 850 D163-0850P 34
122 94 Chisel 850 D163-0850C 34
65
61 ø90
36 Furukawa F12
Point 1100 D164-1100P 72
155 110 Chisel 1100 D164-1100C 72
85 Blunt 1100 D164-1100B 72
75 ø105
37 Furukawa F19
Point 1200 D165-1200P 97
155 130 Chisel 1200 D165-1200C 97
85 Blunt 1200 D165-1200B 97
85 ø120
38 Furukawa F22
Point 1250 D166-1250P 125
170 151 Chisel 1250 D166-1250C 125
95 Blunt 1250 D166-1250B 125
95 ø135
39 Furukawa F27
Point 1300 D167-1300P 136
185 165 Chisel 1300 D167-1300C 136
105 Blunt 1300 D167-1300B 136
98 ø140
40 Furukawa F35
Point 1400 D168-1400P 192
208 170 Chisel 1400 D168-1400C 192
115 Blunt 1400 D168-1400B 192
105 ø150
19
FURUKAWA
MM NUMBER KGS
Figure
No.
41 Furukawa F45
Point 1500 D169-1500P 231
237 190 Chisel 1500 D169-1500C 231
130 Blunt 1500 D169-1500B 231
113 ø165
42 Furukawa F70
Point 1600 D670-1600P 270
231 230 Chisel 1600 D670-1600C 270
110 Blunt 1600 D670-1600B 270
118 ø180
43 Furukawa HB1G/ F1
Point 400 D138-0400P 3
27 51 Chisel 400 D138-0400C 3
ø36
27
44 Furukawa HB2G/F2
Point 450 D139-0400P 5
32 61 Chisel 450 D139-0400C 5
ø45
32
45 Furukawa HB3G
Point 560 D142-0560P 12
45 65 Chisel 560 D142-0560C 12
45 ø60
46 Furukawa HB5G
Point 640 D144-0640P 19
60 65 Chisel 640 D144-0640C 19
50 ø75
20
FURUKAWA
MM NUMBER KGS
Figure
No.
47 Furukawa HB8G
Point 750 D146-0750P 30
70 80 Chisel 750 D146-0750C 30
60 ø90
48 Furukawa HB10G
Point 1000 D148-1000P 65
76 110 Chisel 1000 D148-1000C 65
74 ø105
49 Furukawa HB15G
Point 1100 D149-1100P 90
75 130 Chisel 1100 D149-1100C 90
84 ø120
50 Furukawa HB20G
Point 1200 D151-1200P 125
75 150 Chisel 1200 D151-1200C 125
94 ø135
51 Furukawa HB30G
Point 1300 D154-1300P 165
94 170 Chisel 1300 D154-1300C 165
104 ø150
52 Furukawa HB40G
Point 1400 D155-1400P 200
115 190 Chisel 1400 D155-1400C 200
109 ø160
21
HANWOO
MM NUMBER KGS
Figure
No.
53 Hanwoo RHB 301-V

Point 480 D550-0480P 5
84 60 Chisel 480 D550-0480C 5
37
34 ø45
54 Hanwoo RHB 302/303-V

Point 490 D551-0490P 6
76 64 Chisel 490 D551-0490C 6
42
37 ø50
55 Hanwoo RHB 303

Point 500 D552-0500P 8
65 68 Chisel 500 D552-0500C 8
51
ø55
42
56 Hanwoo RHB 305-V

Point 760 D553-0760P 19
117 93 Chisel 760 D553-0760C 19
64
51 ø68
57 Hanwoo RHB 308-2/309

Point 900 D564-0900P 36
115 100 Chisel 900 D564-0900C 36
57
46 ø85
58 Hanwoo RHB 313-V

Point 1050 D555-1050P 61
165 145 Chisel 1050 D555-1050C 61
94
68 ø105
22
HANWOO
MM NUMBER KGS
Figure
No.
59 Hanwoo RHB 322-2/325

Point 1200 D556-1200P 116
170 185 Chisel 1200 D556-1200C 116
83 Blunt 1050 D556-1050B 104
95 ø134
60 Hanwoo RHB 328-2/330

Point 1450 D557-1450P 180
195 200 Chisel 1450 D557-1450C 180
84 Blunt 1300 D557-1300B 164
104 ø149
61 Hanwoo RHB340
Point 1450 D559-1450P 215
210 193 Chisel 1450 D559-1450C 215
104 Blunt 1300 D559-1300B 195
116 ø164
23
INDECO
MM NUMBER KGS
Figure
No.
62 Indeco HP150
Indeco UP121/150P, MES121/150, Euroram RM45 Point 440 D186-0440P 4
48 62 Chisel 440 D186-0440C 4
19
27 ø45
63 Indeco HP200
Indeco UP181/200P, MES180/181/200, Euroram RM48 Point 550 D171-0550P 6
53 70 Chisel 550 D171-0550C 6
21
29 ø48
64 Indeco HP350
Indeco UP301/350P/351P, MES 300/301/350/351, Euroram RM56 Point 600 D173-0600P 10
70 75 Chisel 600 D173-0600C 10
20
33 ø56
65 Indeco HP500
Indeco HB5, UP462/521/550P, MES 452/462/521/550, Euroram RM65 Point 650 D174-0650P 15
45 99 Chisel 650 D174-0650C 15
45 ø65
66 Indeco HP600
Indeco UP553, MES 553, Euroram RM75 Point 680 D190-0680P 19
162 Chisel 680 D190-0680C 19
45 92
ø65 45 ø73
67 Indeco HB8
Euroram RM80 Point 700 D175-0700P 24
63 146 Chisel 700 D175-0700C
24
54 ø80
24
INDECO
MM NUMBER KGS
Figure
No.
68 Indeco HP700
Indeco UP621/650P, MES 601/621/650 Point 650 D177-0650P 24
55 140 Chisel 650 D177-0650C 24
54 ø80
69 Indeco HP900
Indeco UP900 Point 700 D192-0700P 30
185 Chisel 700 D192-0700C 30
54 121
ø84 61 ø89
70 Indeco HP1200
Indeco HB12, UP1200, MES 1200, Euroram RM85/90 Point 800 D176-0800P 33
65 158 Chisel 800 D176-0800C 33
64 ø90
71 Indeco HP1500
Indeco HB19, UP1500, MES 1500, Euroram RM110 Point 900 D178-0900P 55
85 212 Chisel 900 D178-0900C 55
Blunt 800 D178-0800B 49
79 ø109
72 Indeco HP1800
Indeco UP1750, MES 1750/1800, Euroram RM115 Point 1000 D008-1000P 75
71 236 Chisel 1000 D008-1000C 75
Blunt 900 D008-0900B 68
84 ø114
73 Indeco HP2000
Indeco HB27, UP2000, MES 2000, Euroram RM120 Point 1000 D181-1000P 87
85 228 Chisel 1000 D181-1000C 87
Blunt 900 D181-0900B 78
87 ø119
25
INDECO
MM NUMBER KGS
Figure
No.
74 Indeco HP2500
106 207 Chisel 1050 D180-1050C 101
Blunt 950 D180-0950B 91
100 ø130
75 Indeco HP3000
105 216 Chisel 1100 D185-1100C 115
Blunt 1000 D185-1000B 115
110 ø140
76 Indeco HP3500
163 216 Chisel 1170 D182-1170C 130
36 Blunt 1070 D182-1070B 119
110 ø144
77 Indeco HP4000
136 220 Chisel 1250 D191-1250C 172
Blunt 1150 D191-1150B 158
116 ø150
26
INDECO
MM NUMBER KGS
Figure
No.
78 Indeco HP5000
155 245 Chisel 1320 D183-1320C 203
40 Blunt 1170 D183-1170B 180
115 ø159
79 Indeco HP7000
180 266 Chisel 1450 D187-1450C 290
54 Blunt 1300 D187-1300B 260
135 ø180
80 Indeco HP9000
180 268 Chisel 1530 D188-1530C 360
48
Blunt 1380 D188-1380B 325
145 ø195
27
ITALDEM
MM NUMBER KGS
Figure
No.
81 Italdem GK 85/86
Star SH91 Point 450 D400-0450P 4
43 73 Chisel 450 D400-0450C 4
19
29 ø46
82 Italdem GK 160/161
Star SH151 Point 500 D401-0500P 8
40 83 Chisel 500 D401-0500C 8
21
39 ø56
83 Italdem GK 211
Star SH200 Point 620 D411-0620P 15
45 85 Chisel 620 D411-0620C 15
27
45 ø68
Star SH281 Point 660 D403-0660P 23
44 131 Chisel 660 D403-0660C 23
18
53 ø80
Point 700 D404-0700P 28
88 122 Chisel 700 D404-0700C 28
33
58 ø85
28
ITALDEM
MM NUMBER KGS
Figure
No.
Star SH561 Point 900 D405-0900P 60
62 163 Chisel 900 D405-0900C 60
73 ø105
Star SH991 Point 1050 D406-1050P 79
74 193 Chisel 1050 D406-1050C 79
25 Blunt 950 D406-0950B 72
82 ø114
88 Italdem GK 1350
Point 1100 D407-1100P 90
113 217 Chisel 1100 D407-1100C 90
27 Blunt 1000 D407-1000B 82
80 ø119
89 Italdem GK 1351S
Star SH1402 Point 1150 D412-1150P 94
96 190 Chisel 1150 D412-1150C 94
Blunt 1050 D412-1050B 86
86 ø120
90 Italdem GK 1600
Point 1200 D408-1200P 113
140 254 Chisel 1200 D408-1200C 113
48 Blunt 1100 D408-1100B 104
81 ø130
29
ITALDEM
MM NUMBER KGS
Figure
No.
91 Italdem GK 2400
Point 1350 D409-1350P 185
145 225 Chisel 1350 D409-1350C 185
50 Blunt 1200 D409-1200B 165
99 ø148
92 Italdem GK 3400/3500
Point 1450 D410-1450P 238
129 239 Chisel 1450 D410-1450C 238
31 Blunt 1300 D410-1300B 214
39 ø56
93 Italdem GK 3800
Point 1350 D413-1350P 285
148 273 Chisel 1350 D413-1350C 285
Blunt 1300 D413-1250B 265
134 ø185
30
KRUPP
MM NUMBER KGS
Figure
No.
94 Krupp HM50/55
Point 580 D031-0580P 5
180
Chisel 580 D031-0580C 5
55 70
ø60
34
34 ø45 ø45
95 Krupp HM60V
Point 500 D054-0500P 6
52 67 Chisel 500 D054-0500C 6
39
ø48
34
96 Krupp HM60/75
Point 600 D032-0600P 9
203 Chisel 600 D032-0600C 9
60 70
ø70
35
43 ø55 ø55
97 Krupp HM85/90/90V
Point 600 D033-0600P 14
68 68
Chisel 600 D033-0600C 14
44
ø62
49
98 Krupp HM130/140V
Point 780 D035-0780P 18
88 100 Chisel 780 D035-0780C 18
53
ø65
52
99 Krupp HM185/190V
Point 800 D036-0800P 24
88 106 Chisel 800 D036-0800C 24
54
ø75
60
31
KRUPP
MM NUMBER KGS
Figure
No.
100 Krupp HM200

Point 835 D037-0835P 29
336 Chisel 835 D037-0835C 29
142 87 ø100
ø80 62 ø80
101 Krupp HM220/230

Krupp AT220, Chicago Pneumatic CP400/550, Berco BB80 Point 900 D061-0900P 29
83 92 Chisel 900 D061-0900C 29
ø80
61
102 Krupp HM300/301/305

Point 900 D038-0900P 30
131 125 Chisel 900 D038-0900C 30
78
ø80
63
103 Krupp HM350/350V

Atlas Copco MB500 Point 900 D051-0900P 36
110 140 Chisel 900 D051-0900C 36
62
ø90
69
104 Krupp HM550/560V

Point 1000 D040-1000P 55
126 147 Chisel 1000 D040-1000C 55
78
ø100
80
105 Krupp HM580

Atlas Copco MB800, Chicago Pneumatic CP750 Point 1000 D058-1000P 55
95 115 Chisel 1000 D058-1000C 55
ø100
80
32
KRUPP
MM NUMBER KGS
Figure
No.
106 Krupp HM600/601

Point 1000 D041-1000P 56
338 Chisel 1000 D041-1000C 56
110 105 ø120
ø100 80 ø100
107 Krupp HM700/701/702/705

Point 1150 D042-1150P 86
152 200 Chisel 1150 D042-1150C 86
96
Blunt 1050 D042-1050B 79
81 ø115
108 Krupp HM710/720

Chicago Pneumatic CP1150 Point 1080 D043-1080P 82
82 200 Chisel 1080 D043-1080C 82
Blunt 1000 D043-1000B 76
81 ø115
109 Krupp HM780

117 165 Chisel 1150 D059-1150C 94
Blunt 1050 D059-1050B 86
Blunt 1150 D059-1150B 94
81 ø120
110 Krupp HM950/960

Chicago Pneumatic CP1550 Point 1080 D046-1080P 110
65 175 Point 1350 D046-1350P 137
Chisel 1080 D046-1080C 110
Chisel 1350 D046-1350C 137
Blunt 1080 D046-1080B 110
96 ø135
111 Krupp HM1000

98 222 Chisel 1200 D053-1200C 137
Blunt 1100 D053-1100B 126
101 ø140
33
KRUPP
MM NUMBER KGS
Figure
No.
112 Krupp HM1500MV

Atlas Copco HB2200, Chicago Pneumatic CP2250 Point 1300 D055-1300P 178
150 270 Chisel 1300 D055-1300C 178
Blunt 1150 D055-1150B 158
111 ø150
113 Krupp HM2000MV

Point 1400 D056-1400P 220
151 339 Chisel 1400 D056-1400C 220
Blunt 1250 D056-1250B 197
111 ø160
114 Krupp HM2100/2300

151 329 Chisel 1500 D060-1500C 223
Blunt 1350 D060-1350B 201
111 ø165
115 Krupp HM2500/2600MV

182 338 Chisel 1500 D057-1500C 300
Blunt 1350 D057-1350B 270
131 ø180
116 Krupp HM3000

Atlas Copco HB5800 Point 1700 D066-1700P 405
161 410 Chisel 1700 D066-1700C 405
Blunt 1500 D066-1500B 358
135 ø200
117 Krupp HM4000

Atlas Copco HB7000 Point 1800 D052-1800P 458
160 347 Chisel 1800 D052-1800C 458
Blunt 1600 D052-1600B 408
141 ø210
34
MONTABERT
MM NUMBER KGS
Figure
No.
118 Montabert BRH40

Idromeccanica IMI85, Italdem K80, OCM 8, Omal 80, OMD 8, Promove PMV90/P3SH, Star SH40
120 95
Point 500 D002-0500P 5
102 Point 700 D002-0700P 7
Chisel 500 D002-0500C 5
30 ø46
Chisel 700 D002-0700C 7
119 Montabert BRH76/91

Point 550 D005-0550P 11
110 106 Chisel 550 D005-0550C 11
95
42 ø60
120 Montabert BRH125

Idromeccanica IMI260, Italdem K270, OCM 25, Omal 270, OMD 30,
Promove PMV290/390/P12SH, Star SH280 Point 650 D006-0650P 21
148 122 Point 760 D006-0760P 24
126 Point 950 D006-0950P 30
Chisel 650 D006-0650C 21
Chisel 760 D006-0760C 24
53 ø80 Chisel 950 D006-0950C 30

Idromeccanica IMI600, Italdem K550, OCM 55, Omal 500, OMD 50,
Promove PMV690/P16SH, Star SH560 Point 850 D007-0850P 43
71 224 Point 1000 D007-1000P 52
Chisel 850 D007-0850C 43
Chisel 1000 D007-1000C 52
64 ø95

Idromeccanica IMI1000, Indeco MES1750, Italdem K1000, OCM 100, Omal 1000, OMD 100,
Promove PMV 1000/P23SH, Star SH990
71 237 Point 1000 D008-1000P 76
Point 1300 D008-1300P 95
Chisel 1000 D008-1000C 76
Chisel 1300 D008-1300C 95
84 ø114 Blunt 1000 D008-1000B 76
35
MONTABERT
MM NUMBER KGS
Figure
No.

Point 1000 D009-1000P 75
166 160 Chisel 1000 D009-1000C 75
126
81 ø115

Italdem K1030, Promove P22, Star SH1200 Point 1000 D010-1000P 78
166 175 Point 1150 D010-1150P 89
126 Chisel 1000 D010-1000C 78
Chisel 1150 D010-1150C 89
Blunt 1000 D010-1000B 78
87 ø118

Italdem K1300, OCM130, Promove PMV1390/P27SH, Star SH1400 Point 1100 D011-1100P 93
196 215 Chisel 1100 D011-1100C 93
165 Blunt 1000 D011-1000B 85
82 ø120
126 Montabert 30
Bobcat B300 Point 410 D001-0410P 3
32 73 Chisel 410 D001-0410C 3
34 ø40
127 Montabert 50/50SMS

30 80 Point 630 D003-0630P 8
Chisel 430 D003-0430C 6
Chisel 630 D003-0630C 8
42 ø50
36
MONTABERT
MM NUMBER KGS
Figure
No.

61 94 Point 710 D004-0710P 9
Chisel 510 D004-0510C 7
Chisel 710 D004-0710C 9
42 ø50
129 Montabert 85/85SMS/90/90SMS

Bobcat B850/B950 Point 620 D020-0620P 12
76 108 Chisel 620 D020-0620C 12
45 ø62
130 Montabert 125SX

Point 750 D018-0750P 22
137 78 Chisel 750 D018-0750C 22
53 ø74
131 Montabert 140/140SMS/150/150SMS

Point 740 D019-0740P 22
90 118 Point 950 D019-0950P 28
Chisel 740 D019-0740C 22
Chisel 950 D019-0950C 28
53 ø74
132 Montabert 300/300MS

Point 850 D029-0850P 43
138 126 Chisel 850 D029-0850C 43
98
65 ø95

Point 1000 D027-1000P 70
138 138 Chisel 1000 D027-1000C 70
108
75 ø112
37
MONTABERT
MM NUMBER KGS
Figure
No.
134 Montabert 900/900MS/BRH625

Point 1000 D010-1000P 78
166 175 Point 1150 D010-1150P 89
126 Chisel 1000 D010-1000C 78
Chisel 1150 D010-1150C 89
Blunt 1000 D010-1000B 78
87 ø118
135 Montabert V1200/V1200MS/V32/V32MS

Point 1100 D012-1100P 100
115 250 Point 1300 D012-1300P 118
Chisel 1100 D012-1100C 100
Chisel 1300 D012-1300C 118
Blunt 1100 D012-1100B 100
89 ø122
136 Montabert Silver Clip 08 (SC08)

Point 455 D707-0455P 4
176 Chisel 455 D707-0475C 4
37 76 Pyramid Pt 455 D707-0455PP 4
ø58
33 ø42 ø45

Bobcat 580 Point 475 D700-0475P 5
188 Chisel 475 D700-0475C 5
37 76 ø63
Pyramid Pt 475 D700-0475PP 5
35 ø44 ø47

Bobcat 680 Point 550 D703-0550P 9
215 Chisel 550 D703-0550C 9
44 83 Pyramid Pt 550 D703-0550PP 9
ø75
43 ø54 ø54

Bobcat 880 Point 580 D704-0580P 13
243 Chisel 580 D704-0580C 13
52 107 Pyramid Pt 580 D704-0580PP 13
ø82
48 ø62 ø65
38
MONTABERT
MM NUMBER KGS
Figure
No.

Bobcat 980 Point 620 D705-0620P 18
257 Chisel 620 D705-0620C 18
53 118 Pyramid Pt 620 D705-0620PP 18
ø90
54 ø69 ø72
141 Montabert V32/V32MS/V1200/V1600

Point 1100 D012-1100P 100
115 250 Point 1300 D012-1300P 118
Chisel 1100 D012-1100C 100
Chisel 1300 D012-1300C 118
Blunt 1100 D012-1100B 100
89 ø122
142 Montabert V43

Point 1250 D014-1250P 172
135 268 Chisel 1250 D014-1250C 172
Blunt 1100 D014-1100B 152
114 ø150
143 Montabert V53

Point 1400 D016-1400P 230
160 267 Chisel 1400 D016-1400C 230
Blunt 1250 D016-1250B 206
130 ø170
39
MSB
MM NUMBER KGS
Figure
No.
144 MSB MS200

Wimmer W-220 Point 680 D501-0680P 20
55 80 Chisel 680 D501-0680C 20
53 ø70
145 MSB MS250

Point 700 D502-0700P 21
55 85 Chisel 700 D502-0700C 21
56 ø75
146 MSB MS300

Wimmer W-330 Point 790 D503-0790P 28
80 80 Chisel 790 D503-0790C 28
66 ø85
147 MSB MS400

Wimmer W-440 Point 920 D504-0920P 48
90 100 Chisel 920 D504-0920C 48
74 ø95
148 MSB MS450

Point 920 D517-0920P 52
85 130 Chisel 920 D517-0920C 52
ø100
78
40
MSB
MM NUMBER KGS
Figure
No.
149 MSB MS500

Wimmer W-550 Point 1050 D505-1050P 64
90 130 Chisel 1050 D505-1050C 64
74 ø110
150 MSB MS600 (New)

Point 1200 D507-1200P 111
88 157 Chisel 1200 D507-1200C 111
Blunt 1100 D507-1100B 102
89 ø130
151 MSB MS700

Wimmer W-770 Point 1200 D509-1200P 137
135 190 Chisel 1200 D509-1200C 137
Blunt 1100 D509-1100B 126
100 ø140
152 MSB MS800

Wimmer W-880 Point 1400 D511-1400P 206
137 196 Chisel 1400 D511-1400C 206
Blunt 1250 D511-1250B 184
110 ø160
153 MSB MS900

Wimmer W-990 Point 1450 D512-1450P 240
142 216 Chisel 1450 D512-1450C 240
Blunt 1300 D512-1300B 215
110 ø170
41
MSB
MM NUMBER KGS
Figure
No.
154 MSB Saga 1000

Point 500 D513-0500P 6
57 62 Chisel 500 D513-0500C 6
38
34 ø48
155 MSB Saga 1500

Point 580 D514-0580P 11
57 90 Chisel 580 D514-0580C 11
47
46 ø62
156 MSB Saga 2000

Point 630 D515-0630P 15
80 85 Chisel 630 D515-0630C 15
55
55 ø68
42
NPK
MM NUMBER KGS
Figure
No.
157 NPK E-102

Point 390 D131-0390P 2
43 48 Chisel 390 D131-0390C 2
32
ø32
24
158 NPK E-106

Point 410 D134-0410P 4
41 63 Chisel 410 D134-0410C 4
36
ø41
31
159 NPK E-200

Point 500 D630-0500P 5
62 73 Chisel 500 D630-0500C 5
37
ø42
33
160 NPK E-201

Point 550 D631-0550P 6
65 76 Chisel 550 D631-0550C 6
37
ø47
37
161 NPK E-202

Point 650 D632-0650P 9
82 98 Chisel 650 D632-0650C 9
52
ø57
44
162 NPK E-203

Point 700 D633-0700P 17
98 98 Chisel 700 D633-0700C 17
56
51 ø66
43
NPK
MM NUMBER KGS
Figure
No.
163 NPK E-204

Point 750 D634-0750P 22
106 111 Chisel 750 D634-0750C 22
64
ø76
60
164 NPK E-205

Point 850 D635-0850P 31
144 115 Chisel 850 D635-0850C 31
68
64 ø86
165 NPK E-206

Point 940 D638-0940P 49
160 126 Chisel 940 D638-0940C 49
74
71 ø96
166 NPK E-207

Point 950 D636-0950P 63
176 135 Chisel 950 D636-0950C 63
80
79 ø106
167 NPK E-208A

Point 1050 D637-1050P 81
179 146 Chisel 1050 D637-1050C 81
79
87 ø116
168 NPK E-210

Point 1100 D135-1100P 93
175 165 Chisel 1100 D135-1100C 93
88
99 ø126
44
NPK
MM NUMBER KGS
Figure
No.
169 NPK E-213

Point 1200 D126-1200P 121
210 180 Chisel 1200 D126-1200C 121
100 Blunt 1100 D126-1100B 111
103 ø136
170 NPK E-216

Point 1300 D136-1300P 145
226 210 Chisel 1300 D136-1300C 145
110 Blunt 1150 D136-1150B 129
111 ø146
171 NPK E-220

Point 1350 D127-1350P 183
260 215 Chisel 1350 D127-1350C 183
130 Blunt 1200 D127-1200B 163
118 ø156
172 NPK E-225

Point 1525 D137-1525P 227
287 244 Chisel 1525 D137-1525C 227
152 Blunt 1350 D137-1350B 201
125 ø165
173 NPK E-240A

Point 1700 D132-1700P 360
390 240 Chisel 1700 D132-1700P 360
208 Blunt 1500 D132-1500B 318
139 ø183
174 NPK GH10

Point 1200 D639-1200P 115
283 180 Chisel 1200 D639-1200C 115
119 Blunt 1100 D639-1100B 105
104 ø136
45
NPK
MM NUMBER KGS
Figure
No.
175 NPK H-06X

Point 470 D101-0470P 4
55 61 Chisel 470 D101-0470C 4
32
ø40
28
176 NPK H-08XA

Arrowhead 2T Point 480 D102-0480P 5
70 70 Chisel 480 D102-0480C 5
48
ø45
32
177 NPK H-1XA

Point 580 D103-0580P 10
82 82 Chisel 580 D103-0580C 10
46
ø57
41
178 NPK H-2XA/H-2XE

85 94 Chisel 620 D104-0620C 15
54
ø65
49
179 NPK H-3XA/H-3XE

97 107 Chisel 710 D105-0710C 21
69
ø75
55
180 NPK H-4X

Point 780 D106-0780P 32
125 120 Chisel 780 D105-0780C 32
74
68 ø90
46
NPK
MM NUMBER KGS
Figure
No.
181 NPK H-6XA

Point 920 D109-0920P 48
159 123 Chisel 920 D109-0920C 48
70
73 ø96
182 NPK H-7XA

Point 930 D110-0930P 57
153 137 Chisel 930 D110-0930C 57
78
84 ø106
183 NPK H-8XA

Point 1015 D111-1015P 74
248 126 Chisel 1015 D111-1015C 74
95
80 ø116
184 NPK H-10XB/H-10XE

Point 1100 D114-1100P 93
250 162 Chisel 1100 D114-1100C 93
100 Blunt 1000 D114-1000B 85
96 ø126
185 NPK H-12XE

Point 1200 D115-1200P 115
313 152 Chisel 1200 D115-1200C 115
134 Blunt 1100 D115-1100B 106
104 ø136
47
RAMMER
MM NUMBER KGS
Figure
No.
186 Rammer S18/ Piccolo

Kubota KXB300/350, Volvo HB80 Point 400 D070-0400P 4
32 44 Chisel 400 D070-0400C 4
28 ø40
187 Rammer S21

Caterpillar H45FT, Bobcat 1750, Case CB140, JCB HM160,
Kubota KXB400/BTB400, O&K H32, Volvo HB130
54 64 Point 480 D071-0480P 5
Point 560 D071-0560P 6
Chisel 480 D071-0480C 5
Chisel 560 D071-0560C 6
34 ø45
188 Rammer S22

Caterpillar H50FT, Case CB200, Kubota KXB450, O&K H45, Volvo HB200 Point 530 D091-0530P 8
65 57 Point 600 D091-0600P 9
Chisel 530 D091-0530C 8
Chisel 600 D091-0600C 9
35 ø50
189 Rammer S23

Caterpillar H63/H63FT, Case CB370, JCB HM260, Kubota KXB500, O&K H65, Volvo HB300
66 69 Point 680 D073-0680P 15
Point 780 D073-0780P 17
Chisel 680 D073-0680C 15
Chisel 780 D073-0780C 17
49 ø63
190 Rammer S25

Caterpillar H70/H70FT, Case CB620, JCB HM360, Kubota KXB600, O&K H85, Volvo HB440
85 73 Point 730 D075-0730P 20
Point 830 D075-0830P 23
Chisel 730 D075-0730C 20
Chisel 830 D075-0830C 23
50 ø70
191 Rammer S26

Point 850 D076-0850P 35
135 137 Chisel 850 D076-0850C 35
120
70 ø90
48
RAMMER
MM NUMBER KGS
Figure
No.
192 Rammer S27

Caterpillar H90/H90FT, Case CB735, JCB HM550, O&K H120, Volvo HB600 Point 840 D087-0840P 34
115 81 Chisel 840 D087-0840C 34
59 ø84
193 Rammer S29

Caterpillar H100/H100FT, Case CB1150, JCB HM850, O&K H150, Volvo HB800
108 95 Point 900 D090-0900P 47
Chisel 900 D090-0900C 47
66 ø95
194 Rammer S52

Point 900 D077-0900P 55
85 105 Chisel 900 D077-0900C 55
78 ø110
195 Rammer S54

Point 1050 D078-1050P 80
76 118 Chisel 1050 D078-1050C 80
ø115
90
196 Rammer S55/E66

Caterpillar H120s, Case CB2850, JCB HM1350, O&K H260 Point 1050 D079-1050P 80
101 121 Point 1150 D079-1150C 88
Chisel 1050 D079-1050C 80
Chisel 1150 D079-1150C 88
Blunt 950 D079-0950B 73
80 ø115
197 Rammer S56

Point 1100 D080-1100P 102
89 124 Chisel 1100 D080-1100C 102
Blunt 1000 D080-1000B 93
103 ø130
49
RAMMER
MM NUMBER KGS
Figure
No.
198 Rammer S82

Point 1200 D081-1200P 137
145 199 Chisel 1200 D081-1200C 137
Blunt 1050 D081-1050B 122
106 ø140
199 Rammer S83

Caterpillar H140As Point 1200 D082-1200P 137
141 207 Chisel 1200 D082-1200C 137
Blunt 1050 D082-1050B 122
101 ø140
200 Rammer S84

Caterpillar H160As Point 1350 D084-1350P 195
136 211 Chisel 1350 D084-1350C 195
Blunt 1200 D084-1200B 173
116 ø160
201 Rammer S86

Point 1450 D085-1450P 240
166 171 Chisel 1450 D085-1450C 240
Blunt 1300 D085-1300B 215
132 ø169
202 Rammer E63

JCB HM1150, Volvo HB1100 Point 1000 D099-1000P 68
96 99 Chisel 1000 D099-1000C 68
75 ø115
203 Rammer E64

97 96 Point 1150 D088-1150P 70
Chisel 1050 D088-1050C 64
Chisel 1150 D088-1150C 70
75 ø106
50
RAMMER
MM NUMBER KGS
Figure
No.
204 Rammer E65

JCB HM1450, Volvo HB1400 Point 1050 D095-1050P 80
100 113 Chisel 1050 D095-1050C 80
Blunt 850 D095-0850B 69
80 ø125
205 Rammer E66/S55

101 121 Point 1150 D079-1150C 88
Chisel 1050 D079-1050C 80
Chisel 1150 D079-1150C 88
Blunt 950 D079-0950B 73
80 ø115
206 Rammer E68

Caterpillar H130s, Case CB3750, JCB HM1750, O&K H310, Volvo HB1700 Point 1100 D086-1100P 102
119 128 Point 1200 D086-1200P 111
Chisel 1100 D086-1100C 102
Chisel 1200 D086-1200C 111
Blunt 900 D086-0900B 84
90 ø130
207 Rammer G80

Caterpillar H140Cs/140Ds, Case CB4000, JCB HM2350, O&K H380, Volvo HB2400
144 130 Point 1200 D092-1200P 137
Chisel 1200 D092-1200C 137
Blunt 1050 D092-1050B 122
98 ø140
208 Rammer G90

Caterpillar H160Cs/160Ds, Case CB5200, JCB HM2950, O&K H530, Volvo HB3200
200 148 Point 1400 D094-1400P 206
Chisel 1400 D094-1400C 206
Blunt 1250 D094-1250B 184
113 ø159
209 Rammer G100

Caterpillar H180s, JCB HM3850 Point 1450 D089-1450P 240
205 148 Chisel 1450 D089-1450C 240
Blunt 1300 D089-1300B 215
120 ø169
51
RAMMER
MM NUMBER KGS
Figure
No.
210 Rammer G110

Caterpillar H180Ds, JCB HM3950, O&K H700, Volvo HB3800 Point 1450 D096-1450P 240
203 166 Chisel 1450 D096-1450C 240
Blunt 1300 D096-1300B 216
121 ø174
211 Rammer G120

Caterpillar H195 Point 1500 D093-1500P 326
202 210 Chisel 1500 D093-1500C 326
Blunt 1350 D093-1350B 294
148 ø195
212 Rammer G130

Point 1550 D097-1550P 340
207 195 Chisel 1550 D097-1550C 340
Blunt 1400 D097-1400B 308
149 ø203
213 Rammer M14

Point 1100 D800-1100P 92
120 113 Chisel 1100 D800-1100C 92
89 ø125
214 Rammer M18

Point 1200 D801-1200P 137
138 129 Chisel 1200 D801-1200C 137
Blunt 1100 D801-1100B 126
97 ø140
52
ROTAIR
MM NUMBER KGS
Figure
No.
215 Rotair OL50

Furukawa F1/HB1G, Gehl G50S Point 400 D138-0400P 2
27 51 Chisel 400 D138-0400C 2
ø36
27
216 Rotair OL90 (With Collar)

Pel-Job MH90, Omal 80S Point 480 D468-0480P 5
160 Chisel 480 D468-0480C 5
45 65 ø64
ø48 38 ø48
217 Rotair OL90/95

Pel-Job MH95, Gehl G95S Point 480 D469-0480P 5
45 65 Chisel 480 D469-0480C 5
38 ø48
218 Rotair OL130/160

Pel-Job MH130/160, Gehl G160S Point 500 D470-0500P 7
40 56 Chisel 500 D470-0500C 7
35 ø54

Pel-Job MH180/260, Gehl G260S Point 550 D471-0550P 14
30 76 Chisel 550 D471-0550C 14
47 ø68

Gehl G330S Point 600 D472-0600P 19
55 87 Chisel 600 D472-0600C 19
53 ø78
53
SOCOMEC
MM NUMBER KGS
Figure
No.
221 Socomec DMS 50

Point 350 D419-0350P 3
30 56 Chisel 350 D419-0350C 3
ø45
35
222 Socomec DMS 95

Point 480 D420-0480P 5
75 70 Chisel 480 D420-0480C 5
47
35 ø45
223 Socomec DMS 160

Point 570 D436-0570P 14
40 80 Chisel 570 D436-0570C 14
ø55
46
224 Socomec DMS 220

Point 600 D422-0600P 17
48 84 Chisel 600 D422-0600C 17
53 ø65
225 Socomec DMS 330

Point 700 D423-0700P 21
51 98 Chisel 700 D423-0700C 21
13
53 ø72
226 Socomec DMS 430

Point 780 D438-0780P 30
44 151 Chisel 780 D438-0780C 30
67 ø85
54
SOCOMEC
MM NUMBER KGS
Figure
No.
227 Socomec DMS 740

Point 900 D429-0900P 46
66 150 Chisel 900 D429-0900C 46
ø95
75
228 Socomec MDO 550

Point 970 D427-0970P 50
145 160 Chisel 970 D427-0970C 50
15
ø95
74
229 Socomec MDO 750

Point 1050 D428-1050P 80
98 173 Chisel 1050 D428-1050C 80
ø115
89
230 Socomec MDO 1450

Point 1150 D431-1150P 107
83 200 Chisel 1150 D431-1150C 107
Blunt 1050 D431-1050B 98
ø129
100
231 Socomec MDO 1950

Point 1250 D432-1250P 142
90 220 Chisel 1250 D432-1250C 142
Blunt 1150 D432-1150B 131
105 ø140
55
SOOSAN
MM NUMBER KGS
Figure
No.
232 Soosan SB10

Point 450 D445-0450P 4
55 47 Chisel 450 D445-0450C 4
30
32 ø40
233 Soosan SB20

Point 500 D447-0500P 5
51 56 Chisel 500 D447-0500C 5
25
ø45
35
234 Soosan SB30

Point 570 D448-0570P 8
71 67 Chisel 570 D448-0570P 8
40
41 ø53
235 Soosan SB40

Stanley MB506 Point 710 D450-0710P 20
98 76 Chisel 710 D450-0710C 20
56
ø68
53
236 Soosan SB43

Point 800 D446-0800P 24
107 81 Chisel 800 D446-0800C 24
60
ø75
61
237 Soosan SB45

Stanley MB20EX Point 850 D451-0850P 30
92 103 Chisel 850 D451-0850C 30
40
55 ø85
56
SOOSAN
MM NUMBER KGS
Figure
No.
238 Soosan SB50

135 136 Chisel 1000 D452-1000C 55
85
68 ø100
239 Soosan SB60

122 154 Chisel 1050 D453-1050C 98
42
85 ø125
240 Soosan SB81

180 180 Chisel 1200 D457-1200C 125
97 Blunt 1100 D457-1100B 115
95 ø140
241 Soosan SB100

Point 1300 D460-1300P 178
195 170 Chisel 1300 D460-1300C 178
115 Blunt 1200 D460-1200B 165
100 ø150
242 Soosan SB121

205 205 Chisel 1300 D458-1300C 190
105 Blunt 1200 D458-1200B 176
105 ø155
57
SOOSAN
MM NUMBER KGS
Figure
No.
243 Soosan SB130/140

230 194 Chisel 1400 D449-1400C 208
125 Blunt 1250 D449-1250B 186
113 ø165
244 Soosan SB151

249 222 Chisel 1600 D459-1600C 300
141 Blunt 1450 D459-1450B 272
125 ø175
58
TOKU
MM NUMBER KGS
Figure
No.
245 Toku TNB-08E/1M

Teledyne TB100 Point 470 D851-0470P 5
61 64 Chisel 470 D851-0470C 5
31
30 ø45
246 Toku TNB-1E/2M

Drago DRH80, Teledyne TB120/125 Point 500 D366-0500P 7
61 58 Point 600 D366-0600P 8
29 Chisel 500 D366-0500C 7
Chisel 600 D366-0600C 8
35 ø50
247 Toku TNB-2E/3M

68 76 Point 700 D367-0700P 14
37 Chisel 650 D367-0650C 13
Chisel 700 D367-0700C 14
46 ø58
248 Toku TNB-3E/4M

Drago DRH150, Teledyne TB275 Point 650 D373-0650P 15
81 84 Point 700 D373-0700C 16
42 Chisel 650 D373-0650C 15
Chisel 700 D373-0700C 16
44 ø64
249 Toku TNB-4E/5M

100 100 Point 720 D368-0720C 21
60 Chisel 650 D368-0650C 19
Chisel 720 D368-0720C 21
54 ø75
250 Toku TNB-6E/7M

Drago DRH 280, Teledyne TB400/425/625 Point 760 D369-0760P 39
108 92 Point 850 D369-0850P 44
55 Chisel 760 D369-0760C 39
Chisel 850 D369-0850C 44
63 ø95
59
TOKU
MM NUMBER KGS
Figure
No.
251 Toku TNB-7E/10E

Drago DRH650S/900, Teledyne TB700/725/750/825 Point 950 D370-0950P 72
132 137 Point 1000 D370-1000P 76
70 Chisel 950 D370-0950C 72
Chisel 1000 D370-1000C 76
75 ø115
252 Toku TNB-14E/16E

Drago DRH1150S/1600S, Teledyne TB900/925/975/1000/1025 Point 1150 D371-1150P 115
183 207 Chisel 1150 D371-1150C 115
99 Blunt 1050 D371-1050B 105
90 ø135

214 177 Chisel 1300 D371-1300C 145
102 Blunt 1150 D371-1150B 129
99 ø146

Teledyne TB1825/2075 Point 1500 D374-1500P 217
252 216 Chisel 1500 D374-1500C 217
114 Blunt 1350 D374-1350B 196
110 ø160
255 Toku TNB-100

130 157 Chisel 1050 D852-1050C 80
68
84 ø115
60
TOKU
MM NUMBER KGS
Figure
No.
256 Toku TNB-150

Teledyne TB 980 Point 1180 D853-1180P 118
185 247 Point 1270 D853-1270P 118
99 Chisel 1180 D853-1180C 127
Chisel 1270 D853-1270C 127
Blunt 1100 D853-1100B 110
95 ø135
257 Toku TNB-190

Point 1200 D854-1200P 137
195 190 Chisel 1200 D854-1200C 137
105 Blunt 1100 D854-1100B 126
96 ø139
258 Toku TNB-230

210 200 Chisel 1220 D855-1220C 151
100 Blunt 1100 D855-1100B 136
104 ø146
259 Toku TNB-310

230 251 Chisel 1350 D856-1350C 212
115 Blunt 1200 D856-1200B 189
113 ø160
260 Toku TNB-400

282 292 Chisel 1550 D858-1550C 310
129 Blunt 1400 D858-1400B 378
124 ø178
61
TOYO
MM NUMBER KGS
Figure
No.
261 Toyo THBB31

Dehaco DHB35, JKHB31, Takeuchi TKB31 Point 350 D480-0350P 2
22 47 Chisel 350 D480-0350C 2
22 ø30
262 Toyo THBB51

35 60 Chisel 400 D481-0400C 4
16
33 ø42
263 Toyo THBB71

27 68 Chisel 450 D482-0450C 5
ø45
35
264 Toyo THBB101

25 95 Chisel 550 D483-0550C 10
41 ø57
265 Toyo THBB201

Takeuchi TKB201 Point 700 D492-0700P 19
70 110 Chisel 700 D492-0700C 19
37
54 ø70
62
TOYO
MM NUMBER KGS
Figure
No.
266 Toyo THBB301

70 110 Chisel 750 D484-0750C 21
37
54 ø70
267 Toyo THBB401

Dehaco DHB405, JKHB401, Takeuchi TKB 401 Point 900 D485-0900P 30
75 140 Chisel 900 D485-0900C 30
39
62 ø80
268 Toyo THBB801

75 200 Chisel 960 D486-0960C 53
41
77 ø100
269 Toyo THBB1101

100 200 Chisel 1050 D487-1050C 91
51
98 ø120
270 Toyo THBB1401

Dehaco DHB1305, JKHB 1401, Takeuchi TKB1401 Point 1050 D488-1050P 101
59 245 Chisel 1050 D488-1050C 101
91 ø130
63
TOYO
MM NUMBER KGS
Figure
No.
271 Toyo THBB1600

Dehaco DHB1605 (1405), JKHB1600, Takeuchi TKB1600 Point 1120 D489-1120P 115
105 260 Chisel 1120 D489-1120C 115
42 Blunt 1020 D489-1020B 105
97 ø136
272 Toyo THBB2000

140 285 Chisel 1250 D490-1250C 173
55 Blunt 1150 D490-1150B 160
110 ø150
273 Toyo THBB3000

Dehaco DHB3205 (4105), JKHB3000, Takeuchi TKB3000 Point 1400 D491-1400P 220
140 305 Chisel 1400 D491-1400C 220
55 Blunt 1250 D491-1250B 197
113 ø160
64
Other Manufacturers Reference Index
Fig Hammer Type Diameter Length Cat. No. Weight
No. mm mm kgs
ARDEN
275 AB 100 45 500 D790-0500P/C 5
276 AB 150/210 57 600 D793-0600P/C 11
277 AB 280/350 70 680 D794-0680P/C 20
279 AB 450 80 840 D795-0840P/C 27
280 AB 1050 105 1050 D791-1050P/C 68
ARROWHEAD
281 S20 45 480 D620-0480P/C 5
282 S30 53 500 D621-0500P/C 7
283 S40 65 620 D622-0620P/C 14
284 S60 75 710 D624-0710P/C 24
285 10T 105 950 D618-0950P/C 62
286 22T 126 1100 D619-1100P/C 93
BOBCAT
329 1250 45 430 D317-0430P/C 4
330 1560 45 450 D330-0430P/C 5
331 2500/2570/3560 64 560 D318-0560P/C 12
332 5500 70 710 D320-0710P/C 20
333 6560 77 700 D321-0700P/C 22
DAEMO
287 DMB S500 70 680 D343-0680P/C 20
288 DMB S1300 105 930 D344-0930P/C 60
289 DMB S1800 120 1000 D345-1000P/C 84
290 DMB S2200 135 1200 D346-1200P/C 120
291 DMB S3000 140 1250 D347-1250P/C 143
292 DMB S3600 150 1350 D348-1350P/C 185
D&A
275 8V 45 500 D790-0500P/C 5
276 15V/20V 57 600 D793-0600P/C 11
277 30V/50V 70 680 D794-0680P/C 20
278 70V 80 840 D795-0840P/C 27
280 130V 105 1050 D791-1050P/C 68
293 180V 125 1150 D792-1150P/C 97
HUSKIE/IZUMI
294 HH100 40 400 D579-0400P/C 3
295 HH150 50 500 D580-0500P/C 6
296 HH300 60 600 D581-0600P/C 11
297 HH500 65 600 D582-0600P/C 13
298 HH750 75 750 D583-0750P/C 25
299 HH1000 90 850 D584-0850P/C 34
300 HH2000 115 1000 D586-1000P/C 76
301 HH3600 135 1150 D587-1150P/C 115
302 HH4500 145 1250 D588-1250P/C 153
LIFTON
303 LH70/80 46 420 D390-0420P/C 4
304 LH110 55 460 D391-0460P/C 7
305 LH170 70 550 D392-0550P/C 16
306 LH360 82 700 D393-0700P/C 24
307 LH500 100 780 D394-0780P/C 43
308 LH1000 130 940 D395-0940P/C 91
65
Other Manufacturers Reference Index
Fig Hammer Type Diameter Length Cat. No. Weight
No. mm mm kgs
OKADA
309 OKB/UB 301 50 500 D280-0500P/C 6
310 OKB/UB 301SL 54 550 D281-0550P/C 8
311 OKB/UB 302 61 550 D297-0550P/C 11
312 OKB/UB 302A 61 600 D282-0600P/C 12
313 OKB/UB 303A 66 700 D283-0700P/C 16
314 OKB/UB 304 74 850 D284-0850P/C 25
315 OKB/UB 304B 74 750 D298-0750P/C 25
316 OKB/UB 305 85 900 D285-0900P/C 32
317 OKB/UB 308 110 1000 D287-1000P/C 61
318 OKB/UB 310 122 1100 D288-1100P/C 100
319 OKB/UB 312B 130 1150 D289-1150P/C 108
320 OKB/UB 316 140 1300 D290-1300P/C 130
321 OKB/UB 318 150 1400 D291-1400P/C 193
322 UB 2 60 550 D277-0550P/C 10
323 UB 4 68 700 D278-0700P/C 18
324 UB 5 80 800 D279-0800P/C 25
325 UB 8 98 1000 D293-1000P/C 54
326 UB11 122 1100 D294-1100P/C 100
327 UB14 135 1200 D295-1200P/C 115
328 UB17/OKB17A2 137 1300 D296-1300P/C 127
STANLEY
329 MB 125 45 430 D317-0430P/C 4
330 MB156 45 450 D330-0450P/C 5
331 MB 250/256/350/356 64 560 D318-0560P/C 12
332 MB 550 70 710 D320-0710P/C 20
333 MB 656/675/695 77 700 D321-0700P/C 22
334 MB 800/856 80 770 D322-0770P/C 26
335 MB 1550 102 915 D323-0915P/C 52
336 MB 1950/1975 114 1050 D324-1050P/C 80
337 MB 2950/2975 130 1000 D326-1000P/C 92
338 MB 3950 140 1250 D328-1250P/C 142
TABE
341 AGB 100/175/200 50 450 D300-0450P/C 6
342 AGB 270/275/350/375 65 620 D302-0620P/C 15
343 AGB 400/475 85 700 D303-0700P/C 28
344 AGB 700/701/750 105 850 D304-0850P/C 57
345 AGB 1000/1300/1301 114 1000 D305-1000P/C 76
346 AGB 1600/1620 130 1150 D306-1150P/C 107
347 AGB 1800 135 1100 D307-1100P/C 119
TOPA
348 TOPA 70 45 500 D570-0500P/C 5
349 TOPA 100 56 630 D571-0630P/C 12
350 TOPA 200 65 740 D572-0740P/C 17
351 TOPA 300 70 810 D573-0810P/C 23
352 TOPA 500 85 980 D574-0980P/C 39
353 TOPA 1000 99 1100 D575-1100P/C 61
354 TOPA 1400 132 1350 D577-1350P/C 110
355 TOPA 1500 134 1350 D576-1350P/C 115
VIBRARAM
295 VRH-50 50 500 D580-0500P/C 6
296 VRH-60 60 600 D581-0600P/C 11
298 VRH-75 75 750 D583-0750P/C 25
299 VRH-90 90 850 D584-0850P/C 34
300 VRH-115 115 1000 D586-1000P/C 76
301 VRH-135 135 1150 D587-1150P/C 115
302 VRH-145 145 1250 D588-1250P/C 153
66
Warranty Guide
The purpose of this guide is to provide advice on the correct application of P&V Demolition Tools
and assist in analysing and resolving any complaints immediately they occur.
Cause and Effect of Fatigue Failures 3) Lubrication

The continuous cycle of compressive and Regular lubrication is essential. Any form of
tensile stresses in a Demolition Tool, even damage to the surface of a demolition tool
under correct operating conditions, creates renders it more liable to suffer fatigue failure.
fatigue stress in the tool which can lead to Care must be taken to prevent accidental
fatigue failure of the tool before it is worn out. gouging or contact welding (“galling” or “pick-
Anything which interferes with the normal up”) due to contact between the tool and chuck
operational cycle of compressive and tensile bushings either through lack of lubrication or
stresses will increase the level of fatigue stress excessive leverage (see Figure 2).
being applied to the tool, increasing the risk of
early fatigue failure. Figure 2
1) Leverage/Bending LEVERING THE TOOL
The main cause of increased fatigue stress in a

demolition tool is any form of side pressure
during service which creates bending. Utilising
the tool as a lever, using the incorrect driving
angle or attempting to break ground using the
“pull” of the machine are all detrimental to the
life of a demolition tool and should be avoided
(see Figure 1). HIGH PRESSURE AND
FRICTION CAN DAMAGE
SURFACE OF TOOL SHANK WORK FACE
Figure 1
4) Cold/Corrosion
Low temperature causes a Demolition Tool to
be more susceptible to fatigue failure. Tools
should be kept sheltered from the weather
when not in use. A rusty Demolition Tool is
more likely to suffer fatigue failure, so tools
INCORRECT should be kept well greased.
LEVERAGE DRIVING ANGLE
5) Worn Internal Hammer Parts

Worn hammer parts can cause the tool to be
held too “loosely”. This can create surface
damage on the tool, which can lead to fatigue
failure of the tool. Worn parts can also cause
uneven striking on the tool, which may lead to
fatigue failure of the tool and damage to the
USING MACHINE TO PULL
piston.
2) “Free Running”/“Blank Firing” continued on next page

This can arise in any situation where the
working end is not in proper contact with the
material to be broken. This includes jobs where
the tool slides off the work and also when
break-through of thin concrete slabs or
boulders occurs. It is essential that the tool is
applied at a right-angle to the working surface
at all times.
67
Warranty Guide - continued
6) Typical Failures
(Guide to Warranty Claims)
P&V Demolition Tools are manufactured from
first class materials and then heat-treated to
produce tools with optimum fatigue and wear
resistance. When a tool has apparently failed
to give satisfactory service life, a brief visual
inspection can often give a quick indication of
the cause.
d) Typical fractures caused by blank firing

and/or excessive chuck bush wear/damage.
Warranty claims rejected.
e) Typical fractures caused by blank firing

and/or twisting of the tool due to
worn/damaged retainer pin. Warranty claims
a) Typical fractures caused by excessive rejected.
bending/leverage of the demolition tool.
Warranty claims rejected.
STRESS
CONCENTRATION ˚
90
POINT
f) Typical fracture caused by lack of lubrication

and/or chuck bush wear/damage. Warranty
claims rejected.
HOLLOW
b) Typical of high stress fracture, usually

caused by using the tool as an anchor to g) Mushrooming: this is caused by driving the
"pull" the machine. Warranty claims rejected chisel or point into hard dense material for
too long a period of time without
penetration. This generates intense heat,
softening the point and causing it to
“mushroom”. This is not a manufacturing
fault. Warranty claims rejected.
STRESS CONCENTRATION POINT AT 90
RETAINER PIN FLATS
˚ TO THE
c) Typical fracture caused by levering tool

whilst buried in the burden. Warranty claims
rejected.
h) Note fatigue lines originate from the internal

point, not outer diameter. Very rare failure
type due to steel defect. 100% warranty
accepted.
68

P&V - Demolição Pesada

Uploaded by

Copyright:

Available Formats

P&V - Demolição Pesada

Uploaded by

Document Information

Original Description:

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

P&V - Demolição Pesada

Uploaded by

Copyright:

Available Formats

Demolition

Contents Page Page

Conical Point - for general Wide Chisels - for increased

Chisels - as for Points but also

Grooved Chisel - for use in soft or

For correct selection of tool types see page 2

ARDEN 65 MONTABERT 35-39

ARROWHEAD 46, 65 MSB 40-42

ATLAS COPCO 13-17 NPK 43-47

BERCO 13 OCM 35-36

BOBCAT 65 O&K 48-52

CASE 48-51 OKADA 66

CATERPILLAR 48-52 OMAL 35, 53

CHICAGO PNEUMATIC 13, 16-17, 33-34 OMD 35

D&A 65 PROMOVE 35-36

DEHACO 62-64 RAMMER 48-52

DRAGO 59-60 ROTAIR 53

EURORAM 24-27 SOCOMEC 54-55

FURUKAWA 18-21 SOOSAN 56-58

GEHL 53 STANLEY 56-58, 66

HANWOO 22-23 STAR 28-29, 35-36

IDROMECCANICA 35 TAKEUCHI 62-64

INDECO 24-27 TELEDYNE 59-61

ITALDEM 28-30 TOKU 59-61

JCB 48-52 TOPA 66

JKHB 62-64 TOYO 62-64

KRUPP 31-34 VIBRARAM 66

KUBOTA 48 VOLVO 48-52

LIFTON 65 WIMMER 40-41

ARDEN ATLAS COPCO - cont.

CHICAGO PNEUMATIC (CP) EURORAM - contd.

HUSKIE/IZUMI - contd. INDECO - contd.

JKHB - contd. MONTABERT - contd.

NPK - contd. OMAL

UB 2 322 66 G80 207 51

1 Atlas Copco PB110

2 Atlas Copco PB160

3 Atlas Copco PB210

4 Atlas Copco PB310

5 Atlas Copco PB420

6 Atlas Copco SB50

7 Atlas Copco SB100

8 Atlas Copco SB150

9 Atlas Copco SB200

10 Atlas Copco SB300

11 Atlas Copco SB300 Scaler

12 Atlas Copco Tex 250H

13 Atlas Copco Tex 250H Scaler

14 Atlas Copco SB450

15 Atlas Copco HBC1100/1700

16 Atlas Copco HBC2500

17 Atlas Copco HBC4000

18 Atlas Copco HBC6000

19 Atlas Copco MB500

20 Atlas Copco MB700/MB800

21 Atlas Copco MB1000

22 Atlas Copco MB1200

23 Atlas Copco MB1700

24 Atlas Copco HB2200