HD-VP410 Spec and User Manual V1.0
HD-VP410 Spec and User Manual V1.0
HD-VP410 Spec and User Manual V1.0
Product Specifications
Video processor HD-VP410
V1.0 20191118
1. Overview
HD-VP410 is one powerful 3-in-1 controller which integrated the function of one
single-picture video processing and one sending card.
Features:
1). Control range: 1920W*1200H, widest 3840, highest 1920.
2). Seamless switching of any channel;
3). 5 channels digital and analog video input, USB playing video and picture files directly;
4). Audio input and output;
5). Integrated the function of sending card and four output Gigabit Network ports.
6). Key lock;
7). Preset saving and calling of scenarios, support saving 7 user templates.
2. Application Scenes
3. Appearance
Front panel:
Under U-disk input playback mode, CVBS and HDMI button will
be defined as , means pause or play the file. Under U-disk
Rear panel
Port Quantity Function
USB(Type A) 1 Directly play videos pictures in the USB
Image file format:jpg、jpeg、png & bmp;
Video file format:mp4、avi、mpg、mkv、mov、vob & rmvb;
Video coding :
MPEG4(MP4),MPEG_SD/HD,H.264(AVI,MKV),FLV
HDMI 1 Signal standard:HDMI1.3 Backward compatible
Resolution:VESA Standard,≤1920×1080p@60Hz
CVBS 1 Signal standard : PAL/NTSC 1Vpp±3db (0.7V
Video+0.3v Sync ) 75 ohm
Resolution:480i,576i
VGA 1 Signal standard : R 、 G 、 B 、 Hsync 、 Vsync:0
to1Vpp±3dB (0.7V Video+0.3v Sync )
75 ohm black level:300mV Sync-tip:0V
Resolution:VESA Standard,≤1920×1080p@60Hz
DVI 1 Signal standard:DVI1.0,HDMI1.3 Backward compatible
Resolution:VESA Standard,PC to 1920x1080,HD to
1080p
AUDIO 2 Audio input and output
Output Port
Port Quantity Function
LAN 4 4-way network port output interface, connected to the
acceptance card
Control interface
Port Quantity Function
Square USB 1 Connect computer setting screen parameters
(Type B)
Power interface 1 110-240VAC,50/60Hz
4. Dimensions
5. Product Operation
5.1 Operation steps
Step 1: Connect the display power to the screen.
Step 2: Connect a playable input source to the HD-VP410.
Step 3: Use the USB serial port to connect to the computer to setting screen
parameters.
Set resolution
Step 1: Press the knob to select “Input Settings → Input Resolution” to enter the input
resolution interface.
Step 2: Rotate the knob to select the desired resolution or select a custom resolution
setting.
Step 3: After setting the resolution, press the knob to determine the resolution.
Template save
Step 1: After saved the parameters, select “Template Settings” on the main menu interface
and press the knob to enter the template setting interface.
Step 2: Rotate the knob to select the template and press the knob to enter the template
operation interface.
Step 3: Enter the template operation interface with three options: Save, Load, and Delete.
Save - Rotate the knob to select "Save", press the knob to save the currently edited
parameters to the selected template. If the selected template has been saved, replace the
last saved template;
Load - rotate the knob to select "Load", press the knob, the device loads the information
saved by the current template;
Delete - Rotate the knob to select "Delete" and press the knob to delete the currently
saved template information.