Abrasives Bonded

Vitrified Grinding Wheels

Aluminium Oxide for

Ferrous Metals
Industrial

Max. Std
Part No. Diam Thick Bore Spec. Grit Order
R.P.M. Qty.
Type 1 - Straight Wheels Bench, Surface, Tool &
Cutter Wheels in Green
BV188168 80 13 12.7 A46MVBE 7900 Medium 1
Silicon Carbide for Tungsten Carbide
BV325821 A60MVBE Fine
BV188176 100 13 19.05 A46MVBE 6210 Medium 1
BV325848 A60MVBE Fine Std
Part No. Diam Thick Bore Spec. Max. Order
BV325856 125 13 19.05 A46MVBE 4970 Medium 1 R.P.M. Grit
Qty.
BV325864 A60MVBE Fine
BV188184 150 13 25.4 A46MVBE 4140 Medium 1 Type 1 - Straight Wheels
BV325872 A60MVBE Fine BV325651 75 25 19.05 39C80KVK 8280 Fine 1
BV188222 150 20 25.4 A36PVBE 4140 Coarse 1 BV325678 150 6 31.75 39C80JVK 4140 Fine 1
BV188230 A46MVBE Medium BV204072 150 13 31.75 39C60JVK 4140 Medium 1
BV188249 A60MVBE Fine BV200093 39C100JVK Fine
BV188265 A80MVBE Very Fine BV200115 150 20 25.4 39C60JVK 4140 Medium 1
BV188026 150 25 25.4 A36PVBE 4140 Coarse 1 BV204099 39C100JVK Fine
BV188034 A46MVBE Medium BV200123 150 25 25.4 39C60JVK 4140 Medium 1
BV188042 A60MVBE Fine BV204110 39C80JVK Fine
BV325880 180 20 25.4 A46MVBE 3600 Medium 1 BV200131 39C100JVK Very Fine
BV325899 A60MVBE Fine BV375152 39C120JVK Very Fine
BV325902 180 25 25.4 A36PVBE 3600 Coarse 1 BV200182 180 13 31.75 39C60JVK 3600 Medium 1
BV188397 A46MVBE Medium BV325716 39C80JVK Fine
BV188451 A60MVBE Fine BV204129 39C100JVK Very Fine
BV199478 200 20 25.4 A46MVBE 3105 Medium 1 BV200190 200 25 25.4 39C60JVK 3105 Medium 1
BV325910 A60MVBE Fine BV204137 39C80JVK Fine
BV325929 200 25 25.4 A24QVBE 3105 V. Coarse 1 BV200204 39C100JVK Very Fine
BV188069 A36PVBE Coarse BV325724 39C120JVK Very Fine
BV188085 A46MVBE Medium BV385778 300 40 38.1 39C60JVK 2070 Medium 1
BV188093 A60MVBE Fine BV374903 350 50 50.8 39C60JVK 1775 Medium 1
BV188524 A80MVBE Very Fine
BV188575 200 40 31.75 A36PVBE 3105 Coarse 1
BV188583 A46MVBE Medium
BV188591 A60MVBE Fine
BV374776 250 25 31.75 A36PVBE 2850 Coarse 1
BV188605 A46MVBE Medium
White Aluminium Oxide
BV188648 A60MVBE Fine
For surface grinding of most hardened steels and ideal for resharpening HSS
BV188107 250 40 38.1 A30QVBE 2850 Coarse 1
drills, planer blades, chisels etc.
BV384267 A36PVBE Coarse
BV188115 A46MVBE Medium
BV188131 A60MVBE Fine Max. Std
Norton Diam Thick Bore Spec. Grit Order
BV325937 250 50 38.1 A36PVBE 2850 Coarse 1 Part No. R.P.M.
Qty.
BV199702 A46MVBE Medium
Type 1 - Straight Wheels
BV068519 150 13 31.75 38A46KVBE 4140 Coarse 1
BV068543 38A60KVBE 4140 Medium
BV203459 150 25 31.75 38A46MVBE 4140 Coarse 1
BV200611 38A60JVBE 4140 Medium
BV326232 38A80KVBE 4140 Fine
BV326240 38A120KVBE 4140 Very Fine
BV200654 180 13 31.75 38A46JVBE 3600 Coarse 1
BV200670 38A60JVBE 3600 Medium
BV114847 200 25 31.75 38A46KVBE 3105 Coarse 1
BV114863 38A60KVBE 3105 Medium
BV326372 38A80KVBE 3105 Fine

15 BV326380 38A120KVBE 3105 Very Fine

 1
Flat Metal Cutting Off Wheels

Iron Free Inox Standard

For cutting stainless steel
and very hard ferrousmetals.
Free of iron.

Abrasives
Part No. Size MM Specification Max R.P.M Std Order
Qty
1810216 100 x 2.5 x 16 FH38-A36S-BF41 I/F 15300 100
1811522 115 x 2.5 x 22 FH38-A36S-BF41 I/F 13330 100
1812722 125 x 2.5 x 22 FH38-A36S-BF41 I/F 12250 100
1815222 150 x 2.5 x 22 FH38-A36S-BF41 I/F 10200 50
General Purpose
1817822 180 x 2.5 x 22 FH38-A36S-BF41 I/F 8500 50
For all ferrous metals.
1823022 230 x 2.5 x 22 FH38-A36S-BF41 I/F 6650 50

Part No. Size MM Specification Max R.P.M StdQty

Order

1005110 50 x 2.5 x 10 FH38-A36S-BF41 24300 200

1006510 63 x 2.5 x 10 FH38-A36S-BF41 24300 200
1007610 76 x 2.5 x 10 FH38-A36S-BF41 19100 200
1010216 100 x 2.5 x 16 FH38-A36S-BF41 15300 100
1011522 115 x 2.5 x 22 FH38-A36S-BF41 13330 100
1012716 125 x 2.5 x 16 FH38-A36S-BF41 12250 100
1012722 125 x 2.5 x 22 FH38-A36S-BF41 12250 100
1015216 150 x 2.5 x 16 FH38-A36S-BF41 10200 50
Mega Inox Premium Ultra Thin
1015220 150 x 2.5 x 20 FH38-A36S-BF41 10200 50
For cutting stainless steel and very hard
1015222 150 x 2.5 x 22 FH38-A36S-BF41 10200 50 ferrous metals. Free of iron and sulphur giving
1017816 180 x 2.5 x 16 FH38-A36S-BF41 8500 50 contamination free cutting of stainless steel.
1017820 180 x 2.5 x 20 FH38-A36S-BF41 8500 50
1017822 180 x 2.5 x 22 FH38-A36S-BF41 8500 50
1020316 200 x 2.5 x 16 FH38-A36S-BF41 7650 50 Part No. Size MM Specification Max R.P.M Std Order
Qty
1020322 200 x 2.5 x 22 FH38-A36S-BF41 7650 50 15102010 100 x 1.0 x 16 A46T-BF41 M/INOX 15300 100
1020325 200 x 2.5 x 25.4 FH38-A36S-BF41 7650 50 15102016 100 x 1.6 x 16 A46T-BF41 M/INOX 15300 100
1020335 200 x 2.5 x 35 FH38-A36S-BF41 7650 50 1510216 100 x 2.0 x 16 A46T-BF41 M/INOX 15300 100
1023016 230 x 2.5 x 16 FH38-A36S-BF41 6650 50 15115010 115 x 1.0 x 22 A46T-BF41 M/INOX 13330 100
1023022 230 x 2.5 x 22 FH38-A36S-BF41 6650 50 15115016 115 x 1.6 x 22 A46T-BF41 M/INOX 13330 100
1023025 230 x 2.5 x 25.4 FH38-A36S-BF41 6650 50 1511522 115 x 2.0 x 22 A46T-BF41 M/INOX 13330 100
1023035 230 x 2.5 x 35 FH38-A36S-BF41 6650 50 15127010 125 x 1.0 x 22 A46T-BF41 M/INOX 12250 100
1423022 230 x 3.1 x 22 FZ40-A30V-BF41 6650 50 15127016 125 x 1.6 x 22 A46T-BF41 M/INOX 12250 100
1512722 125 x 2.0 x 22 A46T-BF41 M/INOX 12250 100
15178020 180 x 2.0 x 22 A46T-BF41 M/INOX 8500 50
15230020 230 x 2.0 x 22 A46T-BF41 M/INOX 6650 50

Mega Inox Premium

For cutting Stainless Steel.

Part No. Size MM Specification Max R.P.M Std Order

Qty
1310216 100 x 2.5 x 16 A24V-BF41 M/INOX 15300 100
1311522 115 x 2.5 x 22 A24V-BF41 M/INOX 13330 100
1312722 125 x 2.5 x 22 A24V-BF41 M/INOX 12250 100
1317822 180 x 2.5 x 22 A24V-BF41 M/INOX 8500 50
1323022 230 x 2.5 x 22 A24V-BF41 M/INOX 6650 50

Ultra Thin
Aluminium “ALU”
For use on die grinders for cutting hard alloy steels. The A60T-BF41 I/F are
Cutting non-ferrous material using load resistant
ideal for cutting stainless steels.
bonds. Suitable for aluminium, bronze, brass.
Bonded

Part No. Size MM Specification Max R.P.M Std Order

Qty
Part No. Size MM Specification Max R.P.M StdQty
Order
3505010 50 x 0.89 x 9.53 A60T-BF41 I/F 30600 25
1610216 100 x 2.5 x 16 FH38-A36S-BF41 ALU 15300 100 3505006 50 x 1.6 x 6.35 A36T-BF41 30600 25
1611522 115 x 2.5 x 22 FH38-A36S-BF41 ALU 13330 100 3508006 80 x 0.89 x 6.35 A60O-BF41 23900 25
1612722 125 x 2.5 x 22 FH38-A36S-BF41 ALU 12250 100 3508089 80 x 0.89 x 6.35 23A60/1Q-BF41 23900 25
1617822 180 x 2.5 x 22 FH38-A36S-BF41 ALU 8500 50 3507606 76 x 0.89 x 6.35 A60T-BF41 I/F 23900 25
1623022 230 x 2.5 x 22 FH38-A36S-BF41 ALU 6650 50 3507610 76 x 0.89 x 9.53 A60T-BF41 I/F 23900 25
16
 Abrasives Reinforced

Flat Metal Cutting Off Wheels

Flexovit provide an extensive range of engineered high speed Cutting Off Wheels. A wide
selection of wheels are available to provide and obtain efficient cutting speed, wheel life and finish.

High Speed Stationary Machines 2UU670SS, 3UU600ST

General purpose for cutting structural steels, bar stock etc. Long life.
A36S-BF41
1HU670QR, 4HU700QR. For cool cutting harder materials. A36Q-BF41/100
Fast cutting of ferrous metals, including
ALU. Cutting non-ferrous aluminium, bronze etc.
bar, tubing. 406mm wheel suitable for
Flexovit Mitrecut 400 and Supercut 400
cut-off machines.
Size MM Specification Max R.P.M Std Order
Part No. Qty
2025425 254 x 3.1 x 25.4 2UU670SS 7650 50
2030220 300 x 3.4 x 20 2UU670SS 6400 20 Portable Chop Saws
2030522 300 x 3.4 x 22 2UU670SS 6400 20 Reinforced Cutting - Off Wheels to suit Low Speed Electric Chop Saws.
2030525 300 x 3.4 x 25.4 2UU670SS 6400 20 (Such as Makita, Hitachi, Ryobi, Black & Decker, De Walt, Craftmaster,
2630525 300 x 3.6 x 25.4 1HU700QR 6400 10 Pentagon, Atlas Copco, Jepson etc.).
2330525 300 x 3.4 x 25.4 A36Q-BF41 ALU 6400 10
2035620 350 x 3.8 x 20 2UU670SS 5500 10
Part No. Size MM Specification Max R.P.M Std Order
2035622 350 x 3.8 x 22 2UU670SS 5500 10 Qty
Industrial

2035625 350 x 3.8 x 25.4 2UU670SS 5500 10 1930525 300 x 3.0 x 25.4 A36S-BF41 5100 20
2035632 350 x 3.8 x 32 2UU670SS 5500 10 1935625 356 x 3.0 x 25.4 A36S-BF41 4400 20
2835620 350 x 3.8 x 20 2UE790QR 5500 10 1940625 406 x 3.0 x 25.4 A36S-BF41 3850 20
2835625 350 x 3.8 x 25.4 2UE790QR 5500 10
2135625 350 x 4.0 x 25.4 1HU670QR 5500 10
2535625 350 x 3.8 x 25.4 4HU700OP 5500 10 Rail Cutting-High Speed
2040625 406 x 4.4 x 25.4 2UU670SS 4800 10 Specially made for rail cutting using special formulations enabling fast burn
2040632 406 x 4.4 x 32 2UU670SS 4800 10 free cutting using hand held demolition machines.
2140625 406 x 4.0 x 25.4 1HU670QR 4800 10
2140632 406 x 4.0 x 32 1HU670QR 4800 10
3140601 406 x 4.4 x 25.4 2UU600TT 4800 10 Part No. Size MM Specification Max R.P.M StdQty
Order

2540625 406 x 4.4 x 25.4 4HU700OP 4800 10 2835620 350 x 3.8 x 20 2UE790QR 5500 10
2045725 450 x 4.5 x 25.4 2UU670SS 4250 10 2835625 350 x 3.8 x 25.4 2UE790QR 5500 10
2050840 500 x 5.4 x 40 3UU670SS 3850 10 3135625 350 x 4.0 x 25.4 A24QBF41/100 5500 10
3161002 600 x 6.4 x 50.8 3UU600ST 3200 5 3140625 400 x 4.0 x 25.4 A24QBF41/100 4800 10

Depressed Centre Metal Grinding Wheels

For ferrous metal welds, structural steels.

High Speed Zirconia “ZA”

Stationary Machines For cast iron, steels. Zirconia grain delivers
2UU670SS, 3UU600ST. excellent stock removal and wheel life.
General purpose for
cutting structural steels,
bar stock etc. Long life. Std Order
Part No. Size MM Specification Max R.P.M
1HU670QR, 4HU700QR. Qty
For cool cutting harder 6517868 180 x 6.8 x 22 ZA24R-BF27 8500 25
materials. A36Q-BF41/100 6523068 230 x 6.8 x 22 ZA24R-BF27 6650 25
ALU. Cutting non-ferrous
aluminium, bronze etc.

Part No. Size MM Specification Max R.P.M Std Order

Qty
6305040 50 x 4 x 9.53 A30Q-BF27 24100 100
6307668 76 x 6.8 x 10 A30S-BF27 19100 100
6310240 100 x 4 x 16 A30S-BF27 15300 50
6310260 100 x 6 x 16 A30S-BF27 15300 50
6311540 115 x 4 x 22 A30S-BF27 13300 50
Aluminium “ALU”
6311560 115 x 6 x 22 A30S-BF27 13300 50
For aluminium, soft bronze, brass, nonferrous, load resistant grinding.
6012745 125 x 4.5 x 22 A24/30T-BF27 12250 50
6012768 125 x 6.8 x 22 A24/30T-BF27 12250 50
6015268 150 x 6.8 x 22 A24/30T-BF27 10200 25 Part No. Size MM Max R.P.M Std Order
Specification Qty
6017845 180 x 4.5 x 22 A24/30T-BF27 8500 40
6910240 100 x 4 x 16 A30S-BF27 ALU 15300 50
6017868 180 x 6.8 x 22 A24/30T-BF27 8500 25
6910260 100 x 6 x 16 A30S-BF27 ALU 15300 50
6117868 180 x 6.8 x 22 A24/30P-BF27 8500 25
6911545 115 x 4.5 x 22 A30S-BF27 ALU 13300 50
6017810 180 x 10 x 22 A24/30T-BF27 8500 20
6911560 115 x 6.0 x 22 A30S-BF27 ALU 13300 50
6117810 180 x 10 x 22 A24/30P-BF27 8500 20
7012734* 125 x 3.4 x 22 A24/30P-BF42 ALU 12250 100
6023045 230 x 4.5 x 22 A24/30T-BF27 6650 40
7012745 125 x 4.5 x 22 A24/30P-BF27 ALU 12250 50
6023068 230 x 6.8 x 22 A24/30T-BF27 6650 25
7012768 125 x 6.8 x 22 A24/30P-BF27 ALU 12250 50
6123068 230 x 6.8 x 22 A24/30P-BF27 6650 25
7017868 180 x 6.8 x 22 A24/30P-BF27 ALU 8500 25
6423068 230 x 6.8 x 22 A24Q-BF27 6650 25
7023068 230 x 6.8 x 22 A24/30P-BF27 ALU 6650 25
6023010 230 x 10 x 22 A24/30T-BF27 6650 20

17 6123010 230 x 10 x 22 A24/30P-BF27 6650 20 * = For cutting only.

 1
Depressed Centre Metal Grinding & Cutting Wheels

Mega Inox Premium

For cutting stainless
steel and very hard
ferrous metals. Free
Mega Inox Premium of iron and sulphur
For grinding stainless giving contamination
steels and very hard free cutting of stainless steel.
ferrous materials.

Part No. Std Order

Size MM Specification Max R.P.M Qty
Part No. Size MM Specification Max R.P.M StdQty
Order 7410225 100 x 2.5 x 16 A24V-BF42 M/INOX 15300 100
7411525 115 x 2.5 x 22 A24V-BF42 M/INOX 13300 100

Abrasives
7110270 100 x 7.0 x 16 A30Q-BF27 M/INOX 15300 50
7411530 115 x 3.0 x 22 A24V-BF42 M/INOX 13300 100
7111570 115 x 7.0 x 22 A30Q-BF27 M/INOX 13300 50
7412725 125 x 2.5 x 22 A24V-BF42 M/INOX 12250 100
7112770 125 x 7.0 x 22 A30Q-BF27 M/INOX 12250 50
7412730 125 x 3.0 x 22 A24V-BF42 M/INOX 12250 100
7117870 180 x 7.0 x 22 A30Q-BF27 M/INOX 8500 25
7417825 180 x 2.5 x 22 A24V-BF42 M/INOX 8500 50
7123070 230 x 7.0 x 22 A30Q-BF27 M/INOX 6650 25
7417830 180 x 3.0 x 22 A24V-BF42 M/INOX 8500 50
7423025 230 x 2.5 x 22 A24V-BF42 M/INOX 6650 50
7423030 230 x 3.0 x 22 A24V-BF42 M/INOX 6650 50

Iron Free Inox Standard

For grinding stainless steel and very hard ferrous materials. Free of iron.
Mega Inox Premium
Extra Ultra Thin
Part No. Size MM Specification Max R.P.M Std Order Fast cutting of stainless
Qty steel and ferrous metals
6710260 100 x 6 x 16 A30S-BF27 I/F 15300 50 up to 2.0mm. Precise
6711560 115 x 6 x 22 A30S-BF27 I/F 13300 50 straight cutting, low noise
6812768 125 x 6.8 x 22 A24/30T-BF27 I/F 12250 50 and dust generation. Free
6815268 150 x 6.8 x 22 A24/30T-BF27 I/F 10200 25 of iron, sulphur and chlorine.
6817868 180 x 6.8 x 22 A24/30T-BF27 I/F 8500 25
6823068 230 x 6.8 x 22 A24/30T-BF27 I/F 6650 25
Part No. Size MM Specification Max R.P.M Std Order
Qty
73115080 115 x 0.8 x 22 A60V-BF42-M/INOX 13300 25
73125080 125 x 0.8 x 22 A60V-BF42-M/INOX 12250 25

General Purpose
For cutting of structural steel, sheet metals and ferrous metals.

Std Order
Part No.
6307634
Size MM
76 x 3.4 x 10
Specification
A30S-BF42
Max R.P.M
19100
Qty
100
Grinding Discs
6310234 100 x 3.4 x 16 A30S-BF42 15300 100
6311534 115 x 3.4 x 22 A30S-BF42 13300 100
6012734 125 x 3.4 x 22 A24/30T-BF42 12250 100
6017834 180 x 3.4 x 22 A24/30T-BF42 8500 50
6023034 230 x 3.4 x 22 A24/30T-BF42 6650 50
3M™ Rigid Grinding Discs
• Product offering designed with quality, safety and extended life in mind.
• Ideal for heavy-duty stock removal applications and grinders with higher
torque ratings
• Flaw and defect removal for smoother surfaces, or creating bevels
Mega Inox Premium Ultra thin before welding
For cutting stainless steel and very hard ferrous metals. Free of iron and • Post weld clean up of heavy weld splatter and residual slag
sulphur giving contamination free cutting of stainless steel. • Removal of parting lines, fins and risers from castings.

Part No. Size MM Specification Max R.P.M Std Order

Qty
7310220 100 x 2.0 x 16 A46T-BF42 M/INOX 15300 100
7311520 115 x 2.0 x 22 A46T-BF42 M/INOX 13300 100
7312720 125 x 2.0 x 22 A46T-BF42 M/INOX 12250 100

Green Corps™
• Best choice for stainless steel and ferrous alloys
• Contains 3M’s patented Cubitron™ mineral for
fast cut rate and long life
• Iron, sulphur and chlorine free (<0.1%).
Iron Free Standard
Reinforced

For cutting stainless steel and very hard ferrous metals. Free of iron.
Green Corps™

Part No. Std Order Part No. Size (mm) Description Max Min Order
Size MM Specification Max R.P.M Qty R.P.M. Quantity
6710234 100 x 3.4 x 16 A30S-BF42 I/F 15300 100 XC002057088 100 x 6 x 16 Green Corps™ 24G 15,300 25
6711534 115 x 3.4 x 22 A30S-BF42 I/F 13300 100 XC002058748 115 x 6 x 22 Green Corps™ 24G 13,300 25
6812734 125 x 3.4 x 22 A24/30T-BF42 I/F 12250 100 XC002058755 125 x 6 x 22 Green Corps™ 24G 12,200 25
6817834 180 x 3.4 x 22 A24/30T-BF42 I/F 8500 50 XC002057393 180 x 6 x 22 Green Corps™ 24G 8,500 10
6823034 230 x 3.4 x 22 A24/30T-BF42 I/F 6650 50 XC002058714 230 x 6 x 22 Green Corps™ 24G 6,650 10
18
 Abrasives Reinforced

Grinding Discs

A
Type WA
• Excellent choice for stainless steel
• Contains premium white aluminium oxide mineral
• Iron, sulphur and chlorine free (<0.1%).
Type WA
• Excellent choice for
stainless steel
Type WA
• Contains premium white
Part No. Size (mm) Description Max Min Order aluminium oxide mineral
R.P.M. Quantity • Iron, sulphur and chlorine free (<0.1%).
XC002057435 100 x 6 x 16 Type WA 36G 15,300 25
XC002058763 115 x 6 x 22 Type WA 36G 13,300 25
XC002058771 125 x 6 x 22 Type WA 36G 12,200 25 Type WA
XC002057443 180 x 6 x 22 Type WA 36G 8,500 10 Max Min Order
Part No. Size (mm) Description R.P.M. Quantity
XC002058722 230 x 6 x 22 Type WA 36G 6,650 10
XB002000519 100 x 2 x 16 Type WA 36G 15,300 20
Industrial

XB002005527 100 x 2 x 16 Type WA 46G 15,300 20

XB002005535 100 x 2 x 16 Type WA 60G 15,300 20
XB002005550 115 x 3 x 22 Type WA 36G 13,300 20
XB002005568 115 x 3 x 22 Type WA 46G 13,300 20
XB002005576 115 x 3 x 22 Type WA 60G 13,300 20
Type A XB002005592 125 x 3 x 22 Type WA 36G 12,200 20
• Excellent choice for ferrous metals XB002005600 125 x 3 x 22 Type WA 46G 12,200 20
• Contains brown aluminium oxide mineral XB002005618 125 x 3 x 22 Type WA 60G 12,200 20
• Provides consistent performance and value. XB002003634 180 x 3.7 x 22 Type WA 36G 8,500 20
XB002005642 180 x 3.7 x 22 Type WA 46G 8,500 20
XB002005659 180 x 3.7 x 22 Type WA 60G 8,500 20
Type A

Part No. Size (mm) Description Max Min Order

R.P.M. Quantity
XC002057450 100 x 6 x 16 Type A 24G 15,300 25
XC002058789 115 x 6 x 22 Type A 24G 13,300 25
XC002058797 125 x 6 x 22 Type A 24G 12,200 25
XC002057468 180 x 6 x 22 Type A 24G 8,500 10
XC002058730 230 x 6 x 22 Type A 24G 6,650 10

3M™ Flexible Grinding Discs Type A

• Reduce the risk of operator fatigue by using 3M™ Flexible Grinding Discs. • Excellent choice for
• Ideal for working on thinner gauged metal applications where controlled ferrous metals
stock removal rates are required • Contains brown aluminium
• Excellent alternative to rigid grinding discs when working on contoured surfaces oxide mineral
• Can be used during weld preparation to smooth and remove surface • Provides consistent
contaminates or heat marks created by flame cutting and gouging. performance and value.

Accessories: For use with 3M™ Flexible Grinding Discs

Part No. Description Max Min Order

R.P.M. Quantity
Green Corps™ 0387092 Back Up Plate for use with 100mm flexible 15,300 5
grinding discs
• Best choice for stainless steel and ferrous alloys
• Contains 3M’s patented Cubitron™ mineral for 0387100 Back Up Plate for use with 115/125mm 13,300 20
fast cut rate and long life flexible grinding discs
• Iron, sulphur and chlorine free (<0.1%). 0387084 Back Up Plate for use with 180mm flexible 8,500 5
grinding discs

Green Corps™

Part No. Size (mm) Description Max Min Order

R.P.M. Quantity
0336334 100 x 2 x 16 Green Corps™ 36G 15,300 20
0336346 100 x 2 x 16 Green Corps™ 46G 15,300 20 Type A
0336358 100 x 2 x 16 Green Corps™ 60G 15,300 20
Part No. Size (mm) Description Max Min Order
0336360 100 x 2 x 16 Green Corps™ 80G 15,300 20 R.P.M. Quantity
XC002031349 115 x 3 x 22 Green Corps™ 36G 13,300 20 XC002057476 100 x 2 x 16 Type A 36G 15,300 20
0386979 115 x 3 x 22 Green Corps™ 46G 13,300 20 XC002057484 100 x 2 x 16 Type A 46G 15,300 20
XC002031364 115 x 3 x 22 Green Corps™ 60G 13,300 20 XC002057492 100 x 2 x 16 Type A 60G 15,300 20
0386995 115 x 3 x 22 Green Corps™ 80G 13,300 20 XB002005675 115 x 3 x 22 Type A 36G 13,300 20
0387001 125 x 3 x 22 Green Corps™ 36G 12,200 20 XB002005683 115 x 3 x 22 Type A 46G 13,300 20
0387019 125 x 3 x 22 Green Corps™ 46G 12,200 20 XB002005691 115 x 3 x 22 Type A 60G 13,300 20
0387027 125 x 3 x 22 Green Corps™ 60G 12,200 20 XB002005717 125 x 3 x 22 Type A 36G 12,200 20
XC002032222 125 x 3 x 22 Green Corps™ 80G 12,200 20 XB002005725 125 x 3 x 22 Type A 46G 12,200 20
0387043 180 x 3.7 x 22 Green Corps™ 36G 8,500 20 XB002005733 125 x 3 x 22 Type A 60G 12,200 20
XC002032248 180 x 3.7 x 22 Green Corps™ 46G 8,500 20 XC002057518 180 x 3.7 x 22 Type A 36G 8,500 20
XC002032255 180 x 3.7 x 22 Green Corps™ 60G 8,500 20 XC002057526 180 x 3.7 x 22 Type A 46G 8,500 20

19 XC002032263 180 x 3.7 x 22 Green Corps™ 80G 8,500 20 XC002057534 180 x 3.7 x 22 Type A 60G 8,500 20
 1
Specialty Grinding & Finishing Products

Flexovit Flexible Discs “AC”

AC series used for light weld grinding and polishing. Excellent for low pressure
applications. Finishing most metals. A special back up pad is included.

Part No. Size MM Specification Max R.P.M Std Order

Qty

Abrasives
8210236 100 x 3 x 16 AC36 15000 20
8210246 100 x 3 x 16 AC46 15000 20 WA Flexible Discs
For light weld grinding, blending and polishing of stainless steels and
8210260 100 x 3 x 16 AC60 15000 20
other hard alloy steels with minimal pressure. Iron Free.
8210280 100 x 3 x 16 AC80 15000 20
8211536 115 x 3 x 22 AC36 13000 25
8211546 115 x 3 x 22 AC46 13000 25
Part No. Size MM Specification Max R.P.M Std Order
8211560 115 x 3 x 22 AC60 13000 25 Qty
8212736 125 x 3 x 22 AC36 12000 25 82310036 100x3x16 WA36 15000 20
8212746 125 x 3 x 22 AC46 12000 25 82310046 100x3x16 WA46 15000 20
8212760 125 x 3 x 22 AC60 12000 25 82310060 100x3x16 WA60 15000 20
8217836 180 x 3 x 22 AC36 8600 10 82311546 115x3x22 WA46 13000 25
8217846 180 x 3 x 22 AC46 8600 10 82312546 125x3x22 WA46 12000 25
8217860 180 x 3 x 22 AC60 8600 10 82318046 180x3x22 WA46 8600 10

Specialty Grinding & Finishing Products - Coated

Zec Grinding Discs

(Silicon Carbide)
For rough grinding of all
concrete/stone materials.
Excellent finishing product.

Part No. Size MM Specification Max R.P.M Min Order

Qty
8310216 100 x 16 SC16 15000 5
8310224 100 x 16 SC24 15000 5
8310236 100 x 16 SC36 15000 5
8311516 115 x 22 SC16 13000 5
Flap Discs Zirconia 8311524 115 x 22 SC24 13000 5
For aluminium, carbon steel, stainless steel, cast iron, 8311536 115 x 22 SC36 13000 5
plastics, bronze, and brass. Excellent grinding and finishing. 8312516 125 x 22 SC16 12000 5
8312524 125 x 22 SC24 12000 5
8312536 125 x 22 SC36 12000 5
Part No. Size MM Specification Max R.P.M Std Order 8318016 180 x 22 SC16 8600 5
Qty
8318024 180 x 22 SC24 8600 5
9800040 100 x 16 40 Zirc GFCZ 15000 10
8318036 180 x 22 SC36 8600 5
9800060 100 x 16 60 Zirc GFCZ 15000 10
Coated Products

9800080 100 x 16 80 Zirc GFCZ 15000 10

9800120 100 x 16 120 Zirc GFCZ 15000 10
9801040 115 x 22 40 Zirc GFCZ 13000 10
9801060 115 x 22 60 Zirc GFCZ 13000 10
9801080 115 x 22 80 Zirc GFCZ 13000 10
Zec Grinding Disc Support Pad
9801120 115 x 22 120 Zirc GFCZ 13000 10
Zec disc support pads are fitted to angle grinders with standard depressed
9803040 125 x 22 40 Zirc GFCZ 12000 10
centre wheel locking nuts.
9803060 125 x 22 60 Zirc GFCZ 12000 10
9803080 125 x 22 80 Zirc GFCZ 12000 10
9803120 125 x 22 120 Zirc GFCZ 12000 10 Min Order
Part No. Size MM
9802040 180 x 22 40 Zirc GFCZ 8600 10 Qty
9802060 180 x 22 60 Zirc GFCZ 8600 10 8318115* 115/125mm Zec Disc Support Pad 1
9802080 180 x 22 80 Zirc GFCZ 8600 10 8318140 180mm Zec Disc Support Pad 1
9802120 180 x 22 120 Zirc GFCZ 8600 10 *Individually Packed on Display Card 20
 Abrasives Coated Products

Industrial Coated Abrasives

Metalite Cloth Belts R295

Polyester Cloth backing with Premium Aluminium
Oxide grain Closekote for metal or woodworking.

24 36 40 60 80 100 120 180 240 320 400

50 x 914mm CF379891 CF236726 CF195073 CF178381 CF172308 CF258407 CF161977 CF235660 CF189189 CF240478 CF241032
50 x 1220mm CF379905 CF196002 CF191833 CF197742 CF172251 CF166731 CF161942 CF177474 CF212601 CF190039 CF241474
50 x 1520mm na CF220698 CF191914 CF178292 CF172189 CF166707 CF161861 na na na na
50 x 2440mm CF379913 CF196118 CF192015 CF178233 CF172049 CF166650 CF161799 CF123943 CF212482 CF206318 CF197661
75 x 2000mm CF379948 CF379956 CF379964 CF379972 CF379980 CF379999 CF380008 na na na na
100 x 914mm CF380016 CF231010 CF192570 CF183083 CF171387 CF166197 CF161284 na na na na
100 x 927mm CF380024 CF141283 CF192597 CF177644 CF171352 CF166189 CF161276 na na na na
100 x 1330mm CF380032 CF189227 CF192716 CF177407 CF171220 CF166111 CF161225 na na na na
Industrial

100 x 1520mm CF380040 CF235628 CF192791 CF177369 CF169188 CF166057 CF161209 na na na na

Belts

A
Scotch-Brite™ Surface Conditioning Belts
• Combining the right grade and surface speed will allow various applications including oxide
removal, surface cleaning, light deburring, timber sanding or decorative finishing
• Scrim backed: Recommended for belts up to 1500mm in length or low tension applications
• SE Scrim backed and Low Stretch: Recommended for belts longer than 1500mm in length and
high tension applications
• 3M offer a custom cut program to meet your requirements. Please contact your distributor to
request a quotation. (minimum order quantities and lead times may apply).

Scotch-Brite™ Surface Conditioning Belts

Scrim SE Scrim
Grade Backed Backed Low Stretch
Coarse • • •
Medium • • •
Very Fine • •
Super Fine • •

3M™ Sanding Belts

• 3MTM offers a wide selection of belt materials covering
most applications
• 3MTM offers a custom cut program to meet your
requirements. Please contact your distributor to request
a quotation. (minimum order quantities and lead times may apply).

3M™ Sanding Belts

Material Recommended
Part No. Backing Grades Coating Mineral Substrates
251U E Weight Paper 40 – 180 Closed Coat Aluminium Oxide Timber
961UZ F Weight Paper 80 – 220 Closed Coat Cubitron™/ Aluminium Oxide Timber
240A X Weight Cloth 40 – 150 Open Coat Aluminium Oxide Timber
970DZ Y Weight Cloth 36 - 220 Open Coat Cubitron™/ Aluminium Oxide Timber
241A X Weight Cloth 40 – 320 Closed Coat Aluminium Oxide Metal / Timber
577F XY Weight Cloth 36 – 120 Closed coat Aluminium Zirconia Metal

21 Trizact™ 237AA X Weight Cloth A160 – A6 N/A Aluminium Oxide Metal

 1
Rolls

Metalite Cloth Backed Rolls

Closekote for dry metal surface preparation.

40 60 80 100 120 150 180 240 320 400

25 x 50M CE100188 CE099864 CE110892 CE110922 CE111104 CE111113 CE111422 CE111384 CE111333 CE151343
40 x 50M CE100153 CE099937 CE110914 CE110949 CE111090 CE111023 CE111414 CE111341 CE111325 CE327832
50 x 50M CE100161 CE099929 CE110906 CE110930 CE111066 CE111007 CE111406 CE111376 CE111317 CE151319

3M™ Frecut™ Gold Paper Rolls

Abrasives
A Part No
0394239
Size
70mm x 50M
Grade
P40
Backing
Unbacked
Min Order
Quantity
4
0391946 70mm x 50M P80 Unbacked 1
3M™ Frecut™ Gold Paper Rolls
0394205 70mm x 50M P120 Unbacked 1
• Excellent for aggressive contour sanding, stropping,
deburring, rust removal and cut-down work prior to polishing 0394254 115mm x 50M P40 Unbacked 2
• Tough, sharp and extremely long lasting Aluminium Oxide 0394247 115mm x 50M P60 Unbacked 2
bonded to C weight backing. 0391680 115mm x 50M P80 Unbacked 2
0391698 115mm x 50M P100 Unbacked 2
0319706 115mm x 50M P120 Unbacked 2
0379875 115mm x 50M P150 Unbacked 2
0379826 115mm x 50M P180 Unbacked 2
0379602 115mm x 50M P240 Unbacked 2
0379859 115mm x 50M P320 Unbacked 2
0398875 70mm x 25M P40 Hookit™ 4
0398891 70mm x 25M P80 Hookit™ 4
0398909 70mm x 25M P120 Hookit™ 4
GC800966365 70mm x 25M P240 Hookit™ 4
0386227 115mm x 25M P40 Hookit™ 2
0386219 115mm x 25M P60 Hookit™ 2
0386201 115mm x 25M P80 Hookit™ 2
0386193 115mm x 25M P120 Hookit™ 2
0392654 115mm x 25M P150 Hookit™ 2
0392662 115mm x 25M P180 Hookit™ 2
0386185 115mm x 25M P240 Hookit™ 2
0386177 115mm x 25M P320 Hookit™ 2

A
Scotch-Brite™ Clean and Finish Rolls Scotch-Brite™ Clean
• Flexible web for finishing, blending and Finish Rolls
and polishing Grade Colour
• Conformable for access to
3Medium Maroon
hard-to-reach areas
• Can be cut to desired length for Fine Maroon
hand sanding or machine sanding Very Fine Maroon
on in line and oscillating sanders Ultra Fine Grey
• 3M™ offer a custom cut program
to meet your requirements. Please contact your distributor to request
a quotation. (minimum order quantities and lead times may apply).

3M™ Blue Cloth Utility Rolls

• Excellent for aggressive contour sanding, stropping, deburring, rust
removal and cut-down work prior to polishing
• Tough, sharp and extremely long lasting Aluminium Oxide bonded to X
weight backing.

3M™ Blue Cloth Utility Rolls

Size
25mm x 45M 40mm x 45M 50mm x 45M
Coated Products

Grade Min Order

Quantity
Part No. Part No. Part No.
- - 60440087942 P40 5
60440087751 60440087843 60440087959 P50 5
60440087769 60440087850 60440087967 P60 5
60440087777 60440087868 60440087975 P80 5
60440087785 60440087876 60440087983 P100 5
]60440087793 60440087884 60440087991 P120 5
60440087801 60440087892 60440088007 P150 5
60440087819 60440087900 60440088015 P180 5
60510026341 60440087918 60440088023 P240 5
60440087827 60440087926 60440088031 P280 5
60440087835 60440087934 60440088049 P320 5
22
 Abrasives Coated Products

Flap Wheels

Garryson Shaft Mounted Flap Wheels

For finishing and polishing of flat or contoured surfaces in manufacturing of tools, dies, moulds,
tank construction, metal furniture and also in the auto industry. Shaft Mounted Flap Wheels are
used in portable air or electric tools including die grinders, flexible shafts and hand drills.
Wheels have 6mm shafts with free length of 40mm. Garryson flap wheels are iron free.

Garryson Shaft Mounted Flap Wheels

Dia. (mm) Width 40 Grit 60 Grit 80 Grit 120 Grit 240 Grit 320 Grit
30mm 10mm FW3010040 FW3010060 FW3010080 FW3010120 FW3010240 FW3010320
30mm 15mm FW3015040 FW3015060 FW3015080 FW3015120 FW3015240 FW3015320
40mm 10mm FW4010040 FW4010060 FW4010080 FW4010120 FW4010240 FW4010320
40mm 15mm FW4015040 FW4015060 FW4015080 FW4015120 FW4015240 FW4015320
40mm 20mm FW4020040 FW4020060 FW4020080 FW4020120 FW4020240 FW4020320
40mm 25mm FW4025040 FW4025060 FW4025080 FW4025120 FW4025240 FW4025320
Industrial

50mm 10mm FW5010040 FW5010060 FW5010080 FW5010120 FW5010240 FW5010320

50mm 15mm FW5015040 FW5015060 FW5015080 FW5015120 FW5015240 FW5015320
50mm 20mm FW5020040 FW5020060 FW5020080 FW5020120 FW5020240 FW5020320
50mm 25mm FW5025040 FW5025060 FW5025080 FW5025120 FW5025240 FW5025320
50mm 30mm FW5030040 FW5030060 FW5030080 FW5030120 FW5030240 FW5030320
60mm 15mm FW6015040 FW6015060 FW6015080 FW6015120 FW6015240 FW6015320
60mm 20mm FW6020040 FW6020060 FW6020080 FW6020120 FW6020240 FW6020320
60mm 30mm FW6030040 FW6030060 FW6030080 FW6030120 FW6030240 FW6030320
60mm 40mm FW6040040 FW6040060 FW6040080 FW6040120 FW6040240 FW6040320
60mm 50mm FW6050040 FW6050060 FW6050080 FW6050120 FW6050240 FW6050320
80mm 15mm FW8015040 FW8015060 FW8015080 FW8015120 FW8015240 FW8015320
80mm 20mm FW8020040 FW8020060 FW8020080 FW8020120 FW8020240 FW8020320
80mm 30mm FW8030040 FW8030060 FW8030080 FW8030120 FW8030240 FW8030320
80mm 40mm FW8040040 FW8040060 FW8040080 FW8040120 FW8040240 FW8040320
80mm 50mm FW8050040 FW8050060 FW8050080 FW8050120 FW8050240 FW8050320

Flap Discs & Fibre Discs

FDBZ SERIES
ZIRC+ SERIES
Specifically for stainless steel For steel, aluminium, stainless steel
• Faster stock removal - higher % alumina zirconia • Fast cut, long life, heavy duty
• Weld removal and grinding stainless steel • Weld removal, grinding steel,
- has grinding aid for cooler operation stainless steel, aluminium
• Polyester cloth gives long life. • 99.99% iron free.

ZIRC+ Series FDBZ Series

Part No. Dia. (mm) GRIT Max Safe Speed Part No. Dia. (mm) GRIT Max Safe Speed
(RPM) (RPM)
FDZM10016036 100 36 15,300 FDBZ10016036 100 36 15,300
FDZM10016040 100 40 15,300 FDBZ10016040 100 40 15,300
FDZM10016060 100 60 15,300 FDBZ10016060 100 60 15,300
FDZM10016080 100 80 15,300 FDBZ10016080 100 80 15,300
FDZM11522036 115 36 13,300 FDBZ10016120 100 120 15,300
FDZM11522040 115 40 13,300 FDBZ11522036 115 36 13,300
FDZM11522060 115 60 13,300 FDBZ11522040 115 40 13,300
FDZM11522080 115 80 13,300 FDBZ11522060 115 60 13,300
FDZM12722036 127 36 12,000 FDBZ11522080 115 80 13,300
FDZM12722040 127 40 12,000 FDBZ11522120 115 120 13,300
FDZM12722060 127 60 12,000 FDBZ12722036 127 36 12,000
FDZM12722080 127 80 12,000 FDBZ12722040 127 40 12,000
FDZM18022036 180 36 8,600 FDBZ12722060 127 60 12,000
FDZM18022040 180 40 8,600 FDBZ12722080 127 80 12,000
FDZM18022060 180 60 8,600 FDBZ12722120 127 120 12,000
FDZM18022080 180 80 8,600 FDBZ18022036 180 36 8,600
FDBZ18022040 180 40 8,600
FDBZ18022060 180 60 8,600
FDBZ18022080 180 80 8,600
FDBZ18022120 180 120 8,600

16 24 36 50 60 80 100 120
Metalite Fibre Discs 100 x 16mm CD106038 CD106496 CD106399 CD106186 CD106275 CD105821 CD105899 CD165239
Closkote for grinding and 115 x 22mm CD206008 CD106488 CD106356 CD106178 CD106267 CD105813 CD198226 CD139092
blending of metal surfaces. 125 x 22mm CD139289 CD106453 CD106321 CD106143 CD106224 CD105996 CD105856 CD105708

23 178 x 22mm CD106526 CD106429 CD106313 CD106100 CD106216 CD105775 CD105619 CD105716
 1
Twist Knot Wire Brushes

Twist Knot Wheel Brushes - Carbon Steel

Individually Boxed, industrial quality.

Part No. Size (mm) Max.R.P.M. Std Order Qty.

W3700 100 x 1R x 16 26g 18K 12000 1
Twist Knot Cup Wire W3750 125 x 1R x 22 26g 24K 12000 1
Brushes - Carbon Steel W3800 150 x 1R x Multi Bore 26g 30K 9000 1
Individually boxed, industrial quality. W3820 150 x 2R x Multi Bore 26g 30K 9000 1

Abrasives
W3900 200 x 1R x Multi Bore 26g 30K 6500 1
W3920 200 x 2R x Multi Bore 26g 30K 6500 1
Part No. Size (mm) Max.R.P.M. Std Order Qty.
W3220 65 x 1R M10 - 1.50 26g 12000 1
W3400 100 x 1R M14 - 2.00 26g 8600 1
W3410S 100 x 1R M14 - 2.00 26g Skirted 8600 1
W3420 100 x 2R M14 - 2.00 26g 8600 1
Twist Knot Wheel Brushes - Stainless Steel
W3430S 100 x 2R M14 - 2.00 26g Skirted 8600 1 Individually Boxed, industrial quality.
W3500 125 x 1R M14 - 2.00 26g 6800 1
W3510S 125 x 1R M14 - 2.00 26g Skirted 6800 1
W3520 125 x 2R M14 - 2.00 26g 6800 1 Part No. Size (mm) Max.R.P.M. Std Order Qty.
W3530S 125 x 2R M14 - 2.00 26g Skirted 6800 1
W3770 125 x 1R x 22 26g S/S 24K 12000 1

Twist Knot Cup Wire Brushes - Stainless Steel

Individually boxed, industrial quality.

Part No. Size (mm) Max.R.P.M. Std Order Qty.

W3600 65 x 1R M10 - 1.25 26g S/S 12000 1
W3610 65 x 1R M10 - 1.50 26g S/S 12000 1 Wheel Brushes / Twistknot Wire
Twistknot Wheel brushes cut quicker and last
W3620 75 x 1R M10 - 1.25 26g S/S 12000 1
longer than crimped wire equivalent.
W3630 75 x 1R M10 - 1.50 26g S/S 12000 1
Some sizes also available in stainless steel.
W3640 75 x 1R M14 - 2.00 26g S/S 12000 1
W3650 100 x 1R M14 - 2.00 26g S/S 8600 1
W3660 100 x 2R M14 - 2.00 26g S/S 8600 1 Wheel Brushes Twistknot Wire
W3670 125 x 1R M14 - 2.00 26g S/S 6800 1
Maximum Safe Diameter No. of
W3680 125 x 2R M14 - 2.00 26g S/S 6800 1 Part No. Speed (RPM) (mm) Rows Gauge Bore
170/S 15,000 75 1R 30g 6mm spindle
170B/S 15,000 75 1R 26g 1/4” spindle
171-1/2 12,000 100 1R 30g 12.7mm
171-5/8 12,000 100 1R 30g 15.9
171-7/8 12,000 100 1R 30g 22
171B-1/2 12,000 100 1R 26g 12.7
171B-5/8 12,000 100 1R 26g 15.9
Twist Knot Pipeline 171B-7/8 12,000 100 1R 26g 22
Wheel Brushes
172 9,000 150 1R 30 Multi Bore
Individually Boxed,
172B 9,000 150 1R 26g Multi Bore
industrial quality.
172A 9,000 150 2R 30g Multi Bore
173 6,000 200 1R 30g Multi Bore
Std Order 173B 6,000 200 1R 26g Multi Bore
Part No. Size (mm) Max.R.P.M.
Qty. 173A 6,000 200 2R 30g Multi Bore
W3980 SB125 x 6 x 22 26g 30k 12000 1 173C 6,000 200 2R 26g Multi Bore
W4100 150 x 6 x 22 22g 30k 9000 1
Wire Wheels, & Brushes

W4600 170 x 6 x M14 - 2.00 24g 50k 8700 1

Twist Knot Pipeline Wheel Brushes

Stainless Steel. Individually Boxed, industrial quality.
Pipeline Weld Brushes / Twistknot Wire
Josco specialise in a full range of pipeline brushes
Part No. Size (mm) Max.R.P.M. Std Order Qty. in differing diameters. These brushes are used in
areas such as stringer bead welds, hot pass,
W4110 SB125 x 6 x 22 26g 30k 12000 1 double jointing and bevel cleaning. Josco also
W4120 150 x 6 x 22mm 26g S/S 40k 9000 1 have brushes for pipe coating removal, machine
cleaning, etc. Also available in Stainless Steel.
Ask for a Josco Pipeline Brush Catalogue.
Bevelled Twist Knot Brushes - Stainless Steel
Individually Boxed, industrial quality.
Pipeline Weld Brushes Twistknot Wire

Part No. Size (mm) Max Std Order Part No. Max Safe Diameter No. of Width Bore
R.P.M. Qty. Speed (RPM) (mm) Rows (mm) Gauge (mm)
W4270 100 x 1R x M10 - 1.50 26g S/S 20K 12000 1 5828 12,000 125 1R 6 26 22
W4280 100 x 1R x M14 - 2.00 26g S/S 20K 12000 1 4009 9,000 150 1R 6 22 22
24
 Abrasives Wire Wheels, & Brushes

Twist Knot Wire Brushes

Notes:
1.The Letter ‘N’ in the part number denotes a brush fitted with a metal skirt.
The skirt can be removed when the wire is worn to the level of the skirt,
Twistknot Cup Brushes / Threaded Bore or Spindle thus exposing more wire and extending the life of the brush.
• Some sizes also available in stainless steel 2.Other thread sizes, i.e. 5/8 BSW & 5/8 UNC, are available upon request.
• Suitable for air and electric angle grinders. 3.Also available in Stainless Steel.

Removal Of Skirt: Some Josco twistknot cup brushes are supplied with a
skirt to prevent wire splay when in use. When worn, the skirt can easily be
Twistknot Cup Brushes Threaded Bore or Spindle removed by striking the edge with a hammer and cold
Max Safe Diameter Other chisel or welders chipping hammer, thus exposing
Part No. Speed (RPM) (mm) Description Bore/Thread
additional wire for extra wear.
TC25 20,000 28 28 gauge wire 1/4" Spindle
TC50 6,000 50 26 gauge wire 6mm Spindle
TC65-1 12,000 63 26 gauge wire 10 x 1.25
TC65-2 12,000 63 26 gauge wire 10 x 1.5
TC65-3 12,000 63 26 gauge wire 14 x 2
166-1 12,000 75 30 gauge wire 10 x 1.25
166-2 12,000 75 30 gauge wire 10 x 1.5
Industrial

166-3 12,000 75 30 gauge wire 14 x 2

Twistknot Bevel Brushes / Threaded Bore
166B-1 12,000 75 26 gauge wire 10 x 1.25 • Also available in stainless steel
166B-2 12,000 75 26 gauge wire 10 x 1.5 • Suitable for air and electric angle grinders.
166B-3 12,000 75 26 gauge wire 14 x 2
167B-3 9,000 88 1 Row x 26 gauge 14 x 2
159NA-3 9,000 100 1 Row x 30 gauge 14 x 2 Twistknot Bevel Brushes Threaded Bore
159NB-3 9,000 100 1 Row x 26 gauge 14 x 2
Part No. Max. Safe Diameter Wire Bore/Thread
159B-3 9,000 100 1 Row x 26 gauge 14 x 2 Speed (RPM) (mm)
160NB-3 9,000 100 2 Row x 26 gauge 14 x 2 TB100-1 12,00 100 26 gauge 10 x 1.25
161NA-3 6,000 125 1 Row x 30 gauge 14 x 2 TB100-2 12,000 100 26 gauge 10 x 1.5
161NB-3 6,000 125 1 Row x 26 gauge 14 x 2 TB100-3 12,000 100 26 gauge 14 x 2
161B-3 6,000 125 1 Row x 26 gauge 14 x 2 TB115-3 12,000 115 26 gauge 14 x 2
162NB-3 6,000 125 2 Row x 26 gauge 14 x 2 TB150-3 9,000 150 26 gauge 14 x 2

Crimped Wire Brushes

Wheel Brushes /
Solid Crimped Wire Crimped Steel Wire
Brushes - Carbon Steel Suitable for bench and pedestal
Individually packed grinders. Some are also available
on display card. in stainless steel and brass. Crimped
wire brushes are softer and less
aggressive than twistknot wire brushes.

Wheel Brushes Crimped Wire

Maximum Safe Diameter Width
Part No. Speed (RPM) (mm) (mm) Bore (mm)
100B 6,000 100 19 Multi-Bore
100 6,000 100 25 Multi-Bore
101B 6,000 125 19 Multi-Bore
Part No. Size (mm) Max.R.P.M. Std Order Qty. 101 6,000 125 28 Multi-Bore
W2320BP 150 x 20 x Multi Bore 30g 6000 1 102A 6,000 150 13 Multi-Bore
W2400BP 200 x 20 x Multi Bore 28g 4600 1 102B 6,000 150 19 Multi-Bore
Individually Boxed, Industrial Quality. 102 6,000 150 28 Multi-Bore
102C 6,000 150 38 Multi-Bore
W2100 75 x 16 x 12.7 30g 10000 1
103A 4,600 200 19 Multi-Bore
W2150 100 x 20 x Multi Bore 30g 8000 1
103 4,600 200 28 Multi-Bore
W2200 125 x 20 x Multi Bore 30g 6000 1
103B 4,600 200 38 Multi-Bore
W2340 150 x 28 x Multi Bore 28g 6000 1
103C 4,600 200 50 Multi-Bore
W2420 200 x 28 x Multi Bore 28g 4600 1
104A 3,600 250 19 25.4
W2450 250 x 38 x 38.1 28g 3600 1
104 3,600 250 28 25.4
W2500 300 x 38 x 50.8 28g 3600 1
104B 3,600 250 38 25.4
104C 3,600 250 50 25.4
Crimped Wire Cup Brushes - Carbon Steel 105 3,000 300 28 31.8
Individually boxed, industrial quality.
105A 3,000 300 38 31.8
105B 3,000 300 50 31.8

Part No. Size (mm) Max.R.P.M. Std Order Qty.

Bore Sizes listed are standard. Other sizes are available on request. All Multi
W3000 100 x M14 - 2.00 25g 8600 1 Bore brushes have a 25.4mm bore and are supplied with reducing bushes
25 W3100 125 x M14 - 2.00 25g 6800 1 25.4mm down to 12.0mm, 12.7mm, 15.9mm and 19mm.
 1
Crimped Wire Brushes High Speed End Brushes

Crimped Wire Cup Brushes /

Threaded Bore or Spindle
Crimped Wire, Solid End
Also available in Stainless Steel.
• High speed end brushes
• Suitable for die grinders.

Crimped Wire Cup Brushes Threaded Bore or Spindle

Part No. Max. Safe Diameter Bore Crimped Wire, Solid End
Speed (RPM) (mm)

Abrasives
150 6,000 50 6mm spindle Part No. Max Safe Trim
151 6,000 60 6mm spindle
Speed (RPM) Diameter Length Wire Size Gauge

152 6,000 75 6mm spindle W10002 25,000 1/2" 7/8" 0.0104" 33gge
153-1 12,000 75 10 x 1.25 W10006 22,000 3/4" 7/8" 0.0104" 33gge
153-2 12,000 75 10 x 1.5 W10008 22,000 3/4 7/8 0.020" 25gge
153-3 12,000 75 14 x 2 W10010 22,000 1" 7/8" 0.0104" 33gge
154-3 6,000 100 14 x 2 W10011 22,000 1" 7/8" 0.014" 28gge
155-3 6,000 125 14 x 2 W10012 22,000 1" 7/8" 0.020" 25gge

Tube Brushes

Automotive and End Brushes for Decarbonising

Automotive and End Brushes #201 - #204

for Decarbonising
Max. Safe
Part No. Speed Description
(RPM)
65 3,000 75 Wheel
#206 - #209 Condensor Tube Brushes
201 3,000 9 Flat End
3/16” BSW Ferrule on sizes 6mm & 8mm
202 3,000 11 Flat End
5/16” BSW Ferrule on sizes larger than 8mm
203 3,000 19 Flat End
#210 Available in Steel, Brass or Nylon.
204 3,000 25 Flat End
206 3,000 9 Pointed End
207 3,000 11 Pointed End
Condensor Brushes
208 3,000 19 Pointed End
#211 Size Part Number Part Number Part Number
209 3,000 25 Pointed End
(Diameter) Steel Brass Nylon
210 3,000 38 Hollow
6mm 776.1 776.1B 776.1N
211 3,000 28 Hollow
#212 8mm 776.2 776.2B 776.2N
212 3,000 41 Seat
9mm 776 776B 776N
219 3,000 8 Flat End x 50mm
13mm 777 777B 777N
220 3,000 8 Flat End x 125mm
#222 16mm 778 778B 778N
221 3,000 8 Pointed x 50mm
19mm 779 779B 779N
222 3,000 8 Pointed x 125mm
25mm 780 780B 780N
230 3,000 19 Narrow Wheel
32mm 781 781B 781N
231 3,000 25 Narrow Wheel
232 3,000 31 Narrow Wheel #234
233 3,000 38 Narrow Wheel
234 8,000 50 Narrow Wheel
235 3,000 50 x 19 Wheel
236 3,000 50 x 25 Wheel
#236 Boiler Tube Brushes 1/2” BSW Ferrule
240 3,000 38 Busby
Wire Wheels, & Brushes

Wire Tube Brushes 1/2” BSW Ferrule

Size Part No. Part No.
(Diameter) Single Spiral Double Spiral
25mm 750
31mm 751
38mm 752 765
44mm 753 766
Twistknot Wire, 1/4” Spindle 50mm 754 767
• High speed end brushes 56mm 755 768
• Suitable for die grinders. 63mm 756 769
69mm 757 770
75mm 758 771
Twistknot Wire, 1/4” Spindle 81mm 759 772
88mm 760 773
Part No. Max Safe Speed Diameter Trim Gauge
(RPM) Length 94mm 761 774
TC19 20,000 3/4" 7/8" 28gge 100mm 762 775
TC25 20,000 11⁄8" 7/8" 28gge 125mm 763
TC25F 20,000 1" 11⁄8" 38gg 150mm 764
26
 Abrasives Wire Wheels, & Brushes

Industrial Hand Brushes Industrial Cleaning Brushes

File Cleaning Brush

• 200mm x 50mm
• Plastic Handle
• File carding.
Part No. 557

Heavy Duty Boot Cleaner

• Powder coated steel frame
• Heavy duty polypropylene brushes.
Industrial Wire Hand Brushes
Part No. 562

Part No. Size (mm) Std Order Qty.

W4300 3 Row Wooden Handle 54 Tuft Steel 12
Industrial

W4320 4 Row Wooden Handle 72 Tuft Steel 12

W4340 3 Row Wooden Handle 43 Tuft Converged Steel 12
W4400 3 Row Wooden Handle 54 Tuft Stainless Steel 12
W4420 4 Row Wooden Handle 72 Tuft Stainless Steel 12

Heavy Duty Boot Cleaner with Flat Base

• Powder coated steel frame
• Heavy duty polypropylene brushes
• Pre drilled mounting holes for easy installation.
Part No. 562FB

Short Wooden Handle

• Steel wire.

Short Handle Hand Brush

Part No. Description Wire Type Medium Duty Boot Cleaner

• Zinc plated tube frame
BSH3R 3 Row Short Handle Steel Wire • Suitable for concrete mounting
BSH4R 4 Row Short Handle Steel Wire • Heavy duty polypropylene brushes.
BSH5R 5 Row Short Handle Steel Wire Part No. 572

Long Wooden Handle

• Steel wire.

Long Handle Hand Brushes

Boot and Shoe Cleaner
Part No. Description Wire Type
Industrial Shoe and Boot
BLH3R 3 Row Long Handle Steel Wire Scrubber. Safety Yellow
BLH4R 4 Row Long Handle Steel Wire Polypropylene Replaceable
BLH5R 5 Row Long Handle Steel Wire Bristles. Standard Heritage
Green Frame. Custom colours
BLH3RSS 3 Row Long Handle Stainless Steel Wire
available. Minimum order
BLH4RSS 4 Row Long Handle Stainless Steel Wire quantity applies.
27 BLH4RB 4 Row Long Handle Brass Wire Part No. 17337
 1
Non Woven Hand Pads
Part No. Material Type Grit Size Std Order Qty.

150mm x 228mm Hand Pads

CX227412 456-White No abrasive 10 pads
Norton Bear-Tex Non Woven Hand Pads are White Hand Pads used for cleaning glass, fibre-glass, porcelain and stainless Steel
available in a variety of grades and styles to
CX298638 748-Grey 1000 - 1200 20 pads
suit your cleaning, scouring and finishing
Grey Micro Fine Hand Pads used for the finest detail work and clean up on over
requirements. spray in wood and automotive.
CX310808 635-Grey 600 20 pads
Grey Ultra Fine Hand Pads used for light cleaning and finishing of metal,
plastic, aluminium door frames etc.
CX298646 796-Green 240-360 20
Ideal Hand Pad for cleaning persistent marks and stains. Removing rust and

Abrasives
oxides from metals.
CX298654 747-Maroon 240 - 360 20 Pads
General Purpose Pad. Tough and economical for cleaning and finishing.
Preparing paint surfaces and applying finishes to non-ferrous metal.
CX310824 777-Maroon 240-360 20 pads
A stiffer more aggressive Pad than the 747. Longer lasting for cleaning and
de-burring.
CX310816 746-Grey 100-150 20 Pads
A Blending Pad extremely resilient and conformable to irregular surface shapes.
Excellent for removing bluing marks on stainless steel. Blending around weld etc.
CX310832 740-Tan 100-150 20 Pads
Heavy Duty Pad for cleaning weld and deburring. Can replace wire brushes and
abrasive sheets.

Sheets, Pads & Blocks

A 255P 314
3M™ Paper Sanding Sheets

734 Size Grade Min Order

3M™ Paper Sanding Sheets
• Large range of full sheets for use on paints, fillers, gel coats and lacquers. (mm) Quantity
Part No.
• 3M™ Freecut™ & Wetordry™ technology is constructed on a durable C
weight backing and is designed to resist loading and offer extended life. GC800708015 - - 230 x 280 P80 500
• Available in 3M™ Production Frecut™ 255P (Aluminium Oxide), 3M™ GC800731827 - - 230 x 280 P100 500
Wetordry™ 314 (Aluminium Oxide) or 3M™ Wetordry™ 734 GC800731777 - - 230 x 280 P120 500
(Silicone Carbide). 0378141 - - 230 x 280 P150 500
GC800625649 - 0377374 230 x 280 P180 500
0387381 - 0377382 230 x 280 P220 500
GC800625623 0377309 0377390 230 x 280 P240 500
0387407 GC223140150 0377408 230 x 280 P280 500
GC800655471 0377325 GC074319010 230 x 280 P320 500
- - 0377424 230 x 280 P360 500
0387423 0377333 GC074324010 230 x 280 P400 500
- GC223140101 GC074326015 230 x 280 P600 500
- GC223140093 GC074327013 230 x 280 P800 500
- - 0377465 230 x 280 P1000 500
- 0377366 GC074391019 230 x 280 P1200 500

Scotch-Brite™ Hand Pads

Cleaning & Polishing Products

Scotch-Brite™ Hand Pads

Part No. Size (mm) Description Min Order
• Widest choice of hand pads for Colour Quantity
cleaning, scuffing, deburring, 0401752 230 x 150 7440 Heavy Duty Tan 40
finishing, and other surface 0401760 230 x 150 7446 Blending Charcoal 40
conditioning applications
WN200025917 230 x 150 96 Scouring Pad Aqua 50
• Superior life over competitive
0401778 230 x 150 8447 Production Pad Maroon 60
products as the mineral is coated
throughout the whole pad and not 0378545 230 x 150 7447 General Purpose Maroon 60
just the outer surfaces. 0378554 230 x 150 7448 Ultra Fine Grey 60
0379527 230 x 150 449 Delicate Cleaning White 50

3M™ Sanding Sponges

Part No. Size (mm) Grade Description Min Order

Quantity
3M™ Sanding Sponges 0283853 96 x 66 x 25 Medium (P120-P180) Regular 144
• Ideal for cleaning and sanding 0283861 96 x 66 x 25 Fine (P320-P400) Regular 144
corners, flat and contoured surfaces.
0283820 96 x 123 x 12 Medium (P120-P180) High Flex 24
• Excellent for hand sanding of
those hard to reach places. 0283838 96 x 123 x 12 Fine (P320-P400) High Flex 24
• Can be used on wood, metals, 0338780 115 x 140 x 5 Medium (P120-P180) Softback 20
plastic and painted surfaces. XC003406375 115 x 140 x 5 Fine (P320-P400) Softback 20
• Softback can be used for either XC003406383 115 x 140 x 5 Super Fine (P500-P600) Softback 20
dry or wet sanding. 0376210 115 x 140 x 5 Ultra Fine (P800-P1000) Softback 20
0376202 115 x 140 x 5 Micro Fine (P1200-P1500) Softback 20
28
 Abrasives Cleaning & Polishing Products

Surface Conditioning

A Attachment Hookit™ Stikit™

Dust Extraction Plain 7 Hole 9 Hole Plain 6 Hole

(Festo)
Size Min Order Grade Part No. Part No. Part No. Part No. Part No.
Quantity
150mm 500 P80 0369991 GC800971183 0395699 GC800752500 0377895
150mm 500 P100 0370007 GC800971175 0395707 0377986 -
150mm 500 P120 0370015 GC800971167 0395723 GC800752484 0400887
150mm 500 P150 0370023 GC800971159 0395715 0400853 0400853
150mm 500 P180 0370031 GC800971142 0395731 GC800752468 0377606
150mm 500 P220 - GC800971134 - - -
150mm 500 P240 0370056 GC800971126 0395756 0400846 0377671
150mm 500 P320 0370064 GC800971100 0395764 0377796 0377804
150mm 500 P400 0370072 GC800971084 0395780 0400820 0377861
150mm 500 P500 0370080 GC800971076 0395772 - -
3M™ 255P Frecut™ Gold Paper Discs
• Suitable for use on timber, metal, paints, fillers and gel coats
Industrial

• Constructed on a durable C weight backing and

coated with 3M Frecut™ sterate to resist loading
and provide maximum life. Accessories: For use with 3M™ Frecut™ Gold Paper Discs
Dust Min Order
Part No. Extraction Attachment Description Thread Quantity
0300723 Plain Hookit™ Back Up Pad 5/16” Male 5
GC800928712 7 Hole Hookit™ Low Profile Back Up Pad 5/16” Male 5
GC800975143 7 Hole Hookit™ Back Up Pad 5/16” Male 5
0300988 9 Hole (Festo) Hookit™ Back Up Pad M8 Male 5
0116566 Plain Stikit™ Back Up Pad 5/16” Male 10
0281139 6 Hole Stikit™ Back Up Pad 5/16” Male 5
0367508 6 Hole Hookit™ Interface Pad N/A 10
0395798 9 Hole (Festo) Hookit™ Interface Pad N/A 10

Scotch-Brite™ Surface Conditioning Discs

• Best for finishing, cleaning and light deburring on flat metal surfaces Scotch-Brite™ SL Surface Conditioning Discs
• Attach and remove easily to 3M™ Hook-and-Loop back up pads. • Using a 2 step process for weld clean up becomes a thing of the past due
to the SL disc’s ability to blend and finish at the same time
• Longer life than other surface conditioning discs
Scotch-Brite™ Surface Conditioning Discs • Super Duty is recommended for use on stainless steel,
while Heavy Duty is recommended for use on Aluminium.
Max Min Order
Part No. Size Grade R.P.M. Quantity
AN019190008 50mm Super Fine (Grey) 23,000 200
AN019190016 50mm Very Fine (Blue) 23,000 200 Scotch-Brite™ SL Surface Conditioning Discs
AN019190024 50mm Medium (Maroon) 23,000 200 Max Min Order
Part No. Size Grade R.P.M. Quantity
AN019190032 50mm Coarse (Brown) 23,000 200
61500193208 100mm Heavy Duty (Maroon) 13,000 100
AN019190040 75mm Super Fine (Grey) 20,000 100
61500193232 100mm Super Duty (Black) 13,000 50
AN019190057 75mm Very Fine (Blue) 20,000 100
61500193216 115mm Heavy Duty (Maroon) 13,000 100
AN019190065 75mm Medium (Maroon) 20,000 100
61500193240 115mm Super Duty (Black) 13,000 50
AN019190073 75mm Coarse (Brown) 20,000 100
61500193224 125mm Heavy Duty (Maroon) 10,000 50
AN019190081 100mm Super Fine (Grey) 13,000 100
61500193257 125mm Super Duty (Black) 10,000 25
AN019190099 100mm Very Fine (Blue) 13,000 100
61500192986 180mm Heavy Duty (Maroon) 6,000 50
AN019190107 100mm Medium (Maroon) 13,000 100
61500192994 180mm Super Duty (Black) 6,000 25
AN019190115 100mm Coarse (Brown) 13,000 100
AN019190123 115mm Super Fine (Grey) 13,000 50
AN019175296 115mm Very Fine (Blue) 13,000 50 Accessories for use with Scotch-BriteTM Surface Conditioning Discs
0378638 115mm Medium (Maroon) 13,000 50
Part No. Description Max Min Order
Diameter x Thread Attachment R.P.M
0378646 115mm Coarse (Brown) 13,000 50 Quantity
0311969 914 Contact Disc Pad 100mm x M10 Female Type T 13,000 5
AN019190149 125mm Super Fine (Grey) 10,000 50
0350330 9145 Contact Disc Pad 115mm x M14 Female Type T 13,000 1
AN019190156 125mm Very Fine (Blue) 10,000 50
61500138492 915 Contact Disc Pad 125mm x M14 Female Type T 10,000 1
AN019190164 125mm Medium (Maroon) 10,000 50
0394534 6585 Contact Disc Pad 125mm x 5/8” Female Type T 10,000 5
0378620 125mm Coarse (Brown) 10,000 50
0210963 GP17 Contact Disc Pad 180mm x M14 Female Type T 6,000 5
0378653 180mm Super Fine (Grey) 6,000 25
0279745 947 Contact Disc Pad 180mm x 5/8” Female Type T 6,000 5
0378661 180mm Very Fine (Blue) 6,000 25
0378679 180mm Medium (Maroon) 6,000 25 Accessories: For use with Scotch-Brite Surface Conditioning Discs and Scotch-Brite SL
29 61500014222 180mm Coarse (Brown) 6,000 25 Surface Conditioning Discs.
 1
Surface Conditioning

A
Scotch-Brite™ Clean and Strip Discs

Part No. Size D x CH Description Colour Max Min Order

(mm) R.P.M Quantity
0286237 100 x 6 Disc Black 6,000 20
0286245 150 x 12 Disc Black 4,000 20
0286252 180 x 20 Disc Black 3,300 10
61500152022 100 x 6 Disc Purple 6,000 25
61500151313 150 x 12 Disc Purple 4,000 25
AN000417467 180 x 20 Disc Purple 3,300 15
0267195 75 6mm Shaft Mount (1 Disc) Blue 10,000 10

Abrasives
0267203 100 6mm Shaft Mount (1 Disc) Blue 8,000 10
0267211 150 6mm Shaft Mount (1 Disc) Blue 6,000 6
0267229 75 6mm Shaft Mount (2 Disc) Blue 10,000 10
Scotch-Brite™ Clean and Strip Discs
• Remove surface rust, corrosion and other surface contaminants 0267237 100 6mm Shaft Mount (2 Disc) Blue 8,000 10
• Easily removes paint and coatings from metal, timber and masonry 0267245 150 6mm Shaft Mount (2 Disc) Blue 6,000 6
• Open web construction resists loading for maximum life XC000702040 100 x 16 Disc (Type 27) Purple 11,000 5
• Available in disc, shaft mounted or angle grinder ready formats XC000702057 115 x 22 Disc (Type 27) Purple 10,000 5
• Black/Blue: Extra Coarse, semi flexible construction XC000702065 125 x 22 Disc (Type 27) Purple 9,000 5
• XT Purple: Extra Coarse, rigid construction. XC000702073 180 x 22 Disc (Type 27) Purple 6,500 5

Accessories: For use with Scotch-BriteTM Clean and Strip Discs

Part No. Type Description Thread Max Min Order

R.P.M Quantity
61988809341 934 Mandrel Use with discs to apply to 6mm As per Max R.P.M. 1
straight tool applications Straight Shaft of abrasive
0299875 0066 Extended retaining nut for use with M14 Female N/A 5
Retaining Nut 180mm Clean & Strip Discs
0324572 9921 Back Use to support 180mm Clean & Strip M14 Female As per Max R.P.M. 5
Up Pad Discs applied to flat applications of abrasive

3M™ Roloc™ Discs

3M™ Roloc™ Discs
Part No. Size Grade Description Max Min Order
• Provide a fast, efficient method for deburring, blending, and finishing of R.P.M. Quantity
metal surfaces 0267351 50mm P36 361F 20,000 200
• Locks securely in place with just a half twist on the back up pad. A reverse 0267344 50mm P50 361F 20,000 200
half twist and they’re off
0267336 50mm P80 361F 20,000 200
• Roloc™ Discs feature a colour coded button for easy grade identification
0175968 75mm P24 361F 20,000 200
• 361F - Aluminium Oxide on a heavy duty
cloth backing 60600105336 75mm P36 361F 20,000 200
• 777F - Cubitron™ mineral on a resin bonded 0175984 75mm P50 361F 20,000 200
cloth backing. Features a grinding aid for 0272765 75mm P80 361F 20,000 200
cooler grinding 0272773 75mm P120 361F 20,000 200
• 983C - A premium Cubitron™ abrasive grain 0289421 75mm P60 777F 20,000 200
Roloc™ Disc constructed on a fibre backing. 0290254 75mm P80 777F 20,000 200
High cut rate and long life. 0290262 75mm P120 777F 20,000 200
0318476 75mm P36 983C 20,000 200
0318490 75mm P50 983C 20,000 200
0318526 75mm P60 983C 20,000 200
0318552 75mm P80 983C 20,000 200
0267328 75mm P120 988C 20,000 200
Cleaning & Polishing Products

Scotch-Brite™ Roloc™ Surface Conditioning Discs

Max Min Order
Part No. Size Grade R.P.M. Quantity
346205 50mm Super Fine (Grey) 25,000 200
0262238 50mm Very Fine (Blue) 25,000 200
0262246 50mm Medium (Maroon) 25,000 200
61500141736 50mm Coarse (Brown) 25,000 200
Scotch-Brite™ Roloc™ Surface Conditioning Discs 0262303 75mm Super Fine (Grey) 18,000 100
• Premium Scotch-Brite™ surface conditioning non-woven web provides a 0262279 75mm Very Fine (Blue) 18,000 100
burr-free decorative finish 61500141793 75mm Medium (Maroon) 18,000 100
• Removes grind marks, rust and coatings.
61500141801 75mm Coarse (Brown) 18,000 100

Scotch-Brite™ Roloc™ SL Surface Conditioning Discs

Scotch-Brite™ Roloc™ SL Surface Conditioning Discs Max Min Order
• Using a 2 step process for weld clean up becomes a thing of the Part No. Size Grade R.P.M. Quantity
past due to the SL disc’s ability to blend and finish at the same time 61500193059 50mm Heavy Duty (Brown) 25,000 200
• Longer life than other surface conditioning discs 61500193075 50mm Super Duty (Black) 25,000 200
• Super Duty is recommended for use on stainless steel, while 61500193042 75mm Heavy Duty (Brown) 18,000 100
Heavy Duty is recommended for use on Aluminium.
61500193067 75mm Super Duty (Black) 18,000 100
30
 Abrasives Cleaning & Polishing Products

Discs

A Scotch-Brite™ Roloc™ Bristle Discs

Max Min Order
Part No. Size Grade R.P.M. Quantity
Scotch-Brite™ Roloc™ Bristle Discs 0382283 50mm 50G – Green 25,000 10
• Brush-like bristle disc removes coatings from 0382291 50mm 80G – Yellow 25,000 10
the large, open areas of a work piece 0382309 50mm 120G – White 25,000 10
• Works on right angle tools quickly and easily
0382325 75mm 50G – Green 15,000 10
with little or no pressure.
0382333 75mm 80G – Yellow 15,000 10
0382341 75mm 120G - White 15,000 10

Wheels & Brushes

A
Scotch-Brite™ Light Deburring Wheels
• Designed to provide a clean, safe and economical system for removing fine burrs
• Widely used for fine deburring and polishing because their conformability will maintain critical
tolerances while providing a fine polished finish.

Scotch-Brite™ Light Deburring Wheels

Part No. Size D x W x CH Density Mineral Grade Max Min Order

(mm) R.P.M. Quantity
0080622 150 x 25 x 25 7 Silicon Carbide Fine 6,000 3
0196717 200 x 25 x 75 7 Silicon Carbide Fine 4,500 3
0080614 300 x 50 x 125 7 Silicon Carbide Fine 3,000 1

Scotch-Brite™ EXL Deburring Wheels

• Designed for top performance and value in a variety of critical deburring and finishing applications
• The unique resin system helps to minimise smearing and the wheels show superior performance on stainless steel, titanium and high nickel alloys.

Scotch-Brite™ EXL Deburring Wheels

Part No. Size D x W x CH (mm) Density Mineral Grade Max Min Order
R.P.M. Quantity
0350405 150 x 25 x 25 8 Silicon Carbide Fine 6,000 3
0350397 200 x 25 x 75 8 Silicon Carbide Fine 4,500 3
0350413 150 x 25 x 25 8 Aluminium Oxide Medium 6,000 3

Scotch-Brite™ Multi Finishing Wheels

• Multi-Finishing wheels are highly conformable, soft wheels that create uniform and attractive final finishes on ferrous and non-ferrous metals
• They are tough enough to finish edges and welds and soft enough to final finish large surfaces
• Silicon Carbide mineral offers a unique bright surface that is often desired by stainless steel fabricators.

Scotch-Brite™ Multi Finishing Wheels

Part No. Size D x W x CH (mm) Density Mineral Grade Max Min Order
R.P.M. Quantity
0287706 150 x 50 x 25 2 Silicone Carbide Fine 6,000 2
61500051653 150 x 50 x 25 2 Silicone Carbide Medium 6,000 2
0386847 150 x 50 x 25 4 Silicone Carbide Medium 6,000 2
61500051646 150 x 50 x 25 2 Silicone Carbide Coarse 6,000 2
0386854 150 x 50 x 25 4 Silicone Carbide Coarse 6,000 2

Scotch-Brite™ Metal Finishing Wheels

• Conformable wheel that provides a uniform and consistent satin/antique finish
• Metal Finishing wheels are used effectively to blend and match #3 or #4 mill finishes on stainless steel and to create brushed or satin finishes on cutlery
• On softer metals such as aluminium, copper and brass they are used to blend out minor surface imperfections and handling marks as well as provide the desired
decorative finish.

Scotch-Brite™ Metal Finishing Wheels

Part No. Size D x W x CH (mm) Density Mineral Grade Max Min Order
R.P.M. Quantity
0084137 150 x 50 x 25 4 Aluminium Oxide Medium 6,000 2
0086876 200 x 50 x 75 4 Aluminium Oxide Medium 4,500 2
0086371 150 x 50 x 25 4 Aluminium Oxide Coarse 6,000 2

31 9060229 150 x 50 x 25 6 Aluminium Oxide Coarse 6,000 2

 1
Wheels & Brushes

A Scotch-Brite™ Bristle Brushes

Part No. Size D x W x CH Grade Max Min Order

Description R.P.M.
Scotch-Brite™ Bristle Brushes (mm) Quantity
• Suitable for industrial cleaning, finishing and deburring applications 61500139391 75 x 4 x 9.5 50G – Green Angled 25,000 40
• Scotch-Brite™ Bristle products are flexible and conform to irregular 61500139409 75 x 4 x 9.5 80G – Yellow Angled 25,000 40
surfaces, so you can expect a consistent finish even on the most 61500176088 75 x 1 x 9.5 120G – White Curved 20,000 80
complex parts 61500176096 75 x 1 x 9.5 220G – Red Curved 20,000 80
• Assisting to meet increasingly stringent safety standards, Scotch-Brite 61500151446 150 x 12 x Multi-bore 36G – Brown Angled 10,000 5
bristle discs contain no wire filaments; furthermore, when replacing 61500151461 150 x 12 x Multi-bore 50G – Green Angled 10,000 5
chemicals or compounds, they have the added benefit of not emitting
61500151479 150 x 12 x Multi-bore 80G – Yellow Angled 10,000 5
harmful chemical vapours.
61500187747 150 x 12 x Multi-bore 120G – White Curved 10,000 5

Abrasives
61500189446 203 x 25 x Multi-bore 50G – Green Straight 6,000 2
61500189453 203 x 25 x Multi-bore 80G – Yellow Straight 6,000 2
61500189461 203 x 25 x Multi-bore 120G – White Straight 6,000 2

Accessories: For use with Scotch-Brite™ Bristle Brushes

Part No. Type Description Max Min Order

R.P.M. Quantity
61500073343 990 Mandrel To suit 75mm Diameter 18,000 5
61988809341 934 Mandrel To suit 150mm Diameter 6,000 1
61500153350 Multi-Bore Adaptor To suit 150mm Diameter N/A 100
61500176153 Extender Adaptor To suit 150mm Diameter N/A 40

Cleaning & Polishing

Standard Abrasives through Saint-Gobain Abrasives offer a

selection of Quick Change Discs with the Lockit fastening system. Part No. Material Type Grit Size Min Order Qty

51mm diameter Discs

492402 Alo 36 100
492404 50
492406 80
492408 120
498404 Power Zirc 50 100
498406 80
492426 Zirconia 36 100
Cleaning & Polishing Products

492429 60
492439 80
440381 Surface Coarse (Tan) 50
440382 Conditioning Medium (Maroon)
440383 Very Fine (Blue)
75mm diameter Discs
492502 Alo 36 50
492504 50
492506 80
492508 120
498504 Power Zirc 50 50
498506 80
492526 Zirconia 36 50
492529 60
492539 80
440481 Surface Coarse (Tan) 50
440482 Conditioning Medium (Maroon)
440483 Very Fine (Blue)
Holder Pads with 1/4 diameter spindle
51mm
AM337218 Medium Firmness 1
75mm
AM325643 Medium Firmness 1 32
 Abrasives Cleaning & Polishing Products

Compounds & Mops

Josco Polishing Mops

Josco Polishing Compounds

Different metals have varying characteristics, and to achieve the best possible
results, it is essential that the correct compound and polishing buff is
selected to do the job.
Josco Polishing Mops

Loose Leaf Stitched Rag Stitched Sisal

Josco Polishing Compounds
Diameter
(white) for high quality finish on aluminium and Width Part No. Width Part No. Width Part No.
SS Compound aluminium alloys - use with a loose leaf calico buff.
50 Fold MLL0301 1 Section MST0301 1 Section MSZ0301
(light green) for high gloss finish on copper, brass and 3”
SSX Compound stainless steel - use with a loose leaf calico buff. 100 Fold MLL0302 2 Section MST0302 2 Section MSZ0302
(light blue) for high gloss finish on most plastics, silver, gold 50 Fold MLL0401 1 Section MST0401 1 Section MSZ0401
MULTISHINE 4”
and die cast articles - use with a loose leaf calico buff. 100 Fold MLL0402 2 Section MST0402 2 Section MSZ0402
(brown) general purpose compound for copper, brass, 50 Fold MLL0601 1 Section MST0601 1 Section MSZ0601
TRIPOLI aluminium and most metals - use with a stitched rag or
Industrial

6”
loose leaf calico buff. 100 Fold MLL0602 2 Section MST0602 2 Section MSZ0602
(dark grey) use to "cut back" light scratch marks on copper, 50 Fold MLL0801 1 Section MST0801 1 Section MSZ0801
FASTCUT brass, stainless steel prior to polishing with the correct sisal 8”
polishing compound - always use with a stitched sisal buff. 100 Fold MLL0802 2 Section MST0802 2 Section MSZ0802
50 Fold MLL1001 1 Section MST1001 1 Section MSZ1001
10”
100 Fold MLL1002 2 Section MST1002 2 Section MSZ1002

Diamond Products 12”

50 Fold
100 Fold
MLL1201
MLL1202
1 Section
2 Section
MST1201
MST1202
1 Section
2 Section
MSZ1201
MSZ1202

The Clipper Classic range of General

Dry Drilling Core Bits
Purpose turbo blades offer the user
a range of high quality blades at a
very competitive cost.

Part No. Size (mm) Clipper Dry Drilling Core Bits are an ideal product to use for drilling
fast, clean and accurate holes through soft brick, concrete block and
TURBO-10520 105x10x20/16 other soft abrasive masonry materials.
TURBO-11522 115x10x22.2/20
TURBO-12522 125x10x22.2/20
TURBO-18025 180x10x25.4/22.2 Part No. Size (mm)
TURBO-23025 230x10x25.4/22.2
DCB-22300 22x300xHEX
DCB-38150 38x150x1/2"BSP

Classic Laser Welded Blade DCB-52150

DCB-65150
52x150x1/2"BSP
65x150x1/2"BSP
DCB-78150 78x150x1/2"BSP
DCB-107150 107x150x1/2"BSP
DCB-117150 117x150x1/2"BSP
DCB-127150 127x150x1/2"BSP
Offering excellent cutting speed and long DCB-152150 152x150x1/2"BSP
useful life when cutting cured concrete,
clay bricks and pavers, concrete pipes
and other medium to hard building Part No. Description
materials on a high speed demolition HEX Adaptor Pack (Includes Hex Adaptor,
DCB-HEXAPACK
saw or masonry saws. A-Taper Centering Masonry Drill Bit & Drift Key)
DCB-SDSAPACK SDS Plus Adaptor Pack (includes SDS Plus Adaptor,
A-taper Centering Masonry Drill Bit & Drift Key)
200mm Universal Extension Rod
Part No. Size (mm) DCB-EXT200 DCB-ATROD A-Taper Guide Rod
LAS-35025 350x2.8x10x25.4/20.0

Double Row Diamond Cup Wheels

Clipper diamond grinding cup wheels

offer the most effective and safe way to
grind, smooth and shape all types of
masonry, concrete and stone. Part No. Description
3 Piece Dry Core Bit Kit (Includes 38mm, 52mm &
DCB-3PCKIT 65mm Dry Core Bit, 200mm Universal Extension
Part No. Size (mm) Rod, A-Taper Centering Masonry Drill Bit, Drift Key,
SDS Plus Adaptor & HEX Adaptor)
DRC-10022 100x5.5x8x22.2/16 5 Piece Dry Core Bit Kit (Includes 38mm, 52mm, 65mm,
DRC-12522 125x5.5x8x22.2 DCB-5PCKIT 117mm, 127mm Dry Core Bits, 200mm Universal
Extension Rod, A-Taper Centering Masonry
33 DRC-18022 180x5.5x8x22.2 Drill Bit, Drift Key, SDS Plus Adaptor & Hex Adaptor)