DRIVELINE COMPONENTS CATALOG

CENTER YOKES, TUBE YOKES AND BALL

STUD TUBE YOKES
J300P-5
JULY 2004

Supersedes
Section 5, Dated
April 2003

Roadranger
MORE TIME ON THE ROAD™
®

Spicer driveshaft components are supplied by Dana Corporation

and are supported by Roadranger— a unified team of people
from Dana and Eaton representing both companies’ products to
give you the best, most reliable service in the industry.
 HOW TO USE THIS CATALOG J300P-5

This publication contains data on Spicer center yokes and ball stud tube yokes for double cardan
driveshafts and Spicer tube yokes for single cardan driveshafts.

HOW TO IDENTIFY A CENTER YOKE USING THIS CATALOG

To identify any center yoke, three pieces of information are required:
1. Determine the Series
2. Determine the dimension between center of U-Joint to center of U-Joint
3. Determine the type of part (circular or rectangular)
Example: To find a 1310 Series rectangular type, with a center to center dimension of 2.75, see the
following example:
1. Find the 1310 Series heading
2. Find the Center to Center dimension of 2.7500
3. Find a type 1 (circular is type 2, rectangular is type 1)
Order Spicer Center Yoke Part Number 2-26-177
Series and all pertinent series dimensions appear as shown in the sample below:
C
Center to Center Swing Diameter Joint Angle Type Center Yoke

1310 SERIES E-3.469 D-1.062 USE KIT 5-153X, 5-785X, 5-810X

2.6880 3.8750 26.0 2 2-26-477
2.6880 3.8750 26.0 2 2-26-497
2.6880 3.8750 26.0 2 2-26-507
Lube hole thru web
2.7500 3.8750 18.0 1 2-26-177

HOW TO IDENTIFY A TUBE YOKE USING THIS CATALOG

To identify any tube yoke, three pieces of information are required:
1. Determine Series
2. Determine the size and wall thickness of the tube it fits
3. Determine the dimension from center of joint to weld point
Example: To find a 1330 Series with a 2.5370 center to weld dimension, that fits a 2.500 OD tube with a
.0830 wall thickness, see the following example:
1. Find the 1330 Series heading
2. Find the 2.5000 Tubing Diameter and .0830 wall thickness (2.5000 x .0830W)
3. Find the 2.5370 Center to Weld dimension
Order Spicer Tube Yoke Part Number 2-28-3347
Series and all pertinent series dimensions appear as shown in the sample below:
F H Used in
For Use With Butt Diameter Centerline to Angle Tube Yoke & Tube Yoke
Tube Diameter & Wall Point of Weld Yoke Assembly Part Number

1330 SERIES SR: E-3.875 OTHERS: E-3.625, D-1.062 USE 5-213X, 5-790X
2.0000 x .1200W 1.7660 2.1200 — 2-28-2777
2.5000 x .0830W 2.3440 1.7190 25.0 2-28-1707
2.5000 x .0830W 2.3440 2.5370 25.0 2-28-3347
3.0000 x .0650W 2.8750 1.7190 25.0 2-28-1177

2 Important: See Safety Information in General Information Section (J300P-GI)

J300P-5 HOW TO USE THIS CATALOG

HOW TO IDENTIFY A BALL STUD TUBE YOKE USING THIS CATALOG

To identify any tube yoke, the following information is required:
1. Determine the Series
2. Determine the size and wall thickness of the tube it fits
3. Determine the dimension from center of joint to weld point
4. Determine the center of the joint to the end of the ball stud dimension
5. Determine the diameter of the ball stud
6. Determine the length of the ball stud
7. Determine the configuration and dimensions of the slinger or seal (if the part has a slinger or seal)
Example: To find a 1310 Series ball stud tube yoke with a 1.4380 center to weld dimension, that fits a
2.000 OD tube with a .120 wall thickness and a .500 diameter ball stud, see the following example:
1. Find the 1310 Series heading
2. Find the 2.000 Tubing Diameter and .1200 wall thickness (2.0000 x .1200W)
3. Find the 1.4380 Center to Weld dimension
4. Find the 1.6410 Center to End of Ball Stud dimension
5. Find the .5940 Ball Stud Length
6. Refer to the slinger and seal illustrations on page 11 to determine which seal/slinger configuration
you have.
If you have a seal, order Spicer ball stud tube yoke assembly part number 2-28-2867X
If you have a slinger, order Spicer ball stud tube yoke assembly part number 2-28-2947X
Series and all pertinent series dimensions appear as shown in the sample below:

For Use With F K H Ball Stud Ball Stud

Tube Butt Centerline Centerline L H Angle Slinger Tube Yoke
Diameter Diameter to Point to End of Length Diameter Assembly
& Wall Thickness of Weld Ball Stud Part Number
1310 SERIES E-3.469 D-1.062 USE KIT 5-153X, 5-785X, 5-810X
1.2500 x .1200 W 1.0160 1.5000 1.6410 .5940 .5000 — 2-86-418 2-28-2807X
1.2500 x .1200 W 1.0160 1.5000 1.6410 .5940 .5000 13.0 231864 2-28-2997X
1.7500 x .0950 W 1.5620 1.4380 1.6410 .5940 .5000 — 2-86-418 2-28-2827X
1.7500 x .0950 W 1.5620 1.4380 1.6410 .5940 .5000 — 231864 2-28-2937X
2.0000 x .1200 W 1.7660 1.4380 1.6410 .5940 .5000 — 2-86-418 2-28-2867X
2.0000 x .1200 W 1.7660 1.4380 1.6410 .5940 .5000 13.0 231864 2-28-2947X
2.5000 x .0650 W 2.3750 1.4380 1.6410 .5940 .5000 — 2-86-418 2-28-3087X
2.5000 x .0830 W 2.3440 1.4380 1.6410 .5940 .5000 — 2-86-418 2-28-2887X
2.5000 x .0830 W 2.3440 1.4380 1.6410 .5940 .5000 13.0 231864 2-28-2957X

Note that footnotes are listed immediately under the yoke dimensional data, alleviating the need to look
at the bottom of the page.

IMPORTANT NOTICE: The data listed herein is correct to the best of our knowledge and belief;
having been compiled from reliable and official sources of information. However, WE CANNOT
ASSUME ANY RESPONSIBILITY for possible error.

Important: See Safety Information in General Information Section (J300P-GI) 3

 J300P-5
CENTER YOKES
Snap Ring Design

Type 1 Type 2

C
Center to Center Swing Diameter Joint Angle Type Center Yoke

1000 SERIES K-1.500 D-.938 USE KIT 5-170X

2.1250 2.5000 — 2 10-26-47

1210 SERIES E-2.688 D-1.062 USE KIT 5-443X

2.6880 3.3750 21.0 2 2-26-457

1310 SERIES E-3.469 D-1.062 USE KIT 5-153X, 5-785X, 5-810X, 5-786X
2.6880 3.8750 26.0 2 2-26-477
Made from C2-26-279
2.6880 3.8750 26.0 2 2-26-497
Made from C2-26-309
2.6880 3.8750 26.0 2 2-26-507
Lube hole thru web
2.7500 3.8750 18.0 1 2-26-177
3.0000 3.8750 33.0 1 2-26-257

1330 SERIES E-3.875 D-1.062 USE KIT 5-213X, 5-790X, 5-812X, 5-791X
2.7500 4.2500 18.0 2 2-26-527
2.7660 4.2500 26.0 2 2-26-467

1350 SERIES E-3.875 D-1.188 USE KIT 5-178X, 5-799X, 5-800X

2.1200 — — 1 3-26-577
2.7500 4.2500 — 1 3-26-317
2.8750 4.6820 26.0 2 3-26-757

1410 SERIES E-4.438 D-1.188 USE KIT 5-160X, 5-801X OR 5-802X

3.3750 4.6880 — 1 3-26-717

1480 SERIES E-4.438 D-1.375 USE KIT 5-188X OR 5-803X

3.3750 3.8750 26.0 1 3-26-667
4.2400 3.8750 26.0 1 3-26-677

1550 SERIES E-5.250 D-1.375 USE KIT 5-155X OR 5-808X

3.9380 4.1250 — 1 4-26-437

4 Important: See Safety Information in General Information Section (J300P-GI)

J300P-5
TUBE YOKES
Spicer Life Series™

Spring Tab Snap Ring

Design Design

F H Used in
For Use With Butt Diameter Centerline to Angle Tube Yoke & Tube Yoke
Tube Diameter & Wall Point of Weld Yoke Assembly Part Number
SPL100 SERIES E-5.375 D-1.625 USE KIT SPL100-1X
4.0000X.0950W 3.8100 2.9690 — 100-28-17
4.0000X.0950W 3.8100 3.2400 — 100-28-27
Half round yoke, not illustrated

SPL140 SERIES E-5.028 D-1.936 USE KIT SPL140-1X

4.3310X.1970W 3.9570 4.4880 — 140-28-17
4.5600X.1650W 4.2450 3.5000 — 140-28-27

SPL170 SERIES E-6.024 D-2.166 USE KIT SPL170X

4.7240X.1970W 4.3500 4.7240 — 170-28-27
4.7240X.1970W 4.3500 4.7240 — 170-28-37
Tube yoke presses into splined sleeve
4.9610X.1180W 4.7500 3.7000 — 170-28-17

SPL250 SERIES E-5.984 D-2.362 USE KIT SPL250X

5.1970X.2360W 4.7240 4.0940 — 250-28-17

SPL70 SERIES E-5.250 D-1.375 USE KIT SPL70X

3.5000X.0950W 3.3100 2.8750 — 70-28-27

SPL90 SERIES E-5.375 D-1.625 USE KIT SPL90X

4.0000X.0950W 3.8120 2.9690 — 90-28-17
4.0000X.1340W 3.7340 2.9690 — 90-28-27

Important: See Safety Information in General Information Section (J300P-GI) 5

 J300P-5
TUBE YOKES

Inside (ISR) Outside (OSR)

F H Used in
For Use With Butt Diameter Centerline to Angle Tube Yoke & Tube Yoke
Tube Diameter & Wall Point of Weld Yoke Assembly Part Number
1000 SERIES K-1.500 D-.938 USE KIT 5-170X
1.2500X.0950W 1.0700 2.5600 60.0 10-26-37
1.7500X.0650W 1.6250 2.0000 — 10-28-97
1.7500X.0650W 1.6250 2.0000 60.0 10-27-1 10-28-17

1100 SERIES E-2.656 D-.938 USE KIT 5-101X OR 5-111X

1.2500X.0950W 1.0620 1.6870 — 1-26-297
2.0000X.0650W 1.8750 1.5000 20.0 1-28-107

1210 SERIES E-2.688 D-1.062 USE KIT 5-443X

1.5000X.1200W 1.2500 1.6250 — 2-28-3027
2.0000X.0830W 1.8440 1.5000 20.0 2-28-2417
2.5000X.0650W 2.3750 1.3120 20.0 2-28-1947

1310 SERIES E-3.469 D-1.062 USE KIT 5-153X, 5-785X, 5-810X, 5-786X
1.2500X.0980W 1.0600 2.1200 — 2-26-187
1.2500X.1200S 1.0000 2.1250 30.0 2-26-347
1.2500X.1880S .8750 2.2810 23.0 2-26-147
1.7500X.0650W 1.6250 1.6880 22.0 2-28-447
1.7500X.0950W 1.6250 1.6880 22.0 2-28-3187
2.0000X.0650W 1.8750 1.6900 22.0 2-28-417
2.0000X.0830W 1.8440 1.6900 — 2-27-7 2-28-357
2.0000X.0950W 1.8120 1.6880 22.0 2-28-577
2.0000X.1200W 1.7660 1.6900 22.0 2-28-1757
2.2500X.0950W 2.0620 2.0000 30.0 2-28-547
2.5000X.0650W 2.3750 1.8440 30.0 2-27-4 2-28-277
2.5000X.0830W 2.3440 1.8440 30.0 2-27-9 2-28-367
2.7500X.0650W 2.6250 1.6880 21.5 2-27-5 2-28-307
2.7500X.0830S 2.5940 1.8910 — 2-28-1507
2.7500X.0830W 2.5940 1.6880 21.5 2-28-1617
2.7500X.1200S 2.5310 1.3750 — 2-28-2787
Material: aluminum
3.0000X.0650W 2.8750 1.6880 18.0 2-27-6 2-28-327
3.0000X.0650W 2.8750 1.8400 — 2-28-3207
3.0000X.0830W 2.8440 1.6880 — 2-27-24 2-28-437
3.0000X.1200W 2.7820 1.3750 — 2-28-2427
Material: aluminum
3.2500X.0650W 3.1250 1.6880 21.5 2-28-557
3.2500X.0830S 3.1040 1.9690 — 2-28-3367
Material: aluminum
3.5000X.0650W 3.3750 1.6880 21.5 2-27-10 2-28-397
3.5000X.0830W 3.3440 1.6880 — 2-27-12 2-28-427
4.0000X.0830W 3.8440 1.5000 — 2-28-477
4.0000X.0830W 3.8440 1.9100 — 2-28-3837
4.0000X.0830W 3.8530 2.1300 — 2-28-3637
Material: aluminum
4.0000X.0830W 3.8530 2.1300 — 2-28-3697
Material: aluminum

6 Important: See Safety Information in General Information Section (J300P-GI)

J300P-5
TUBE YOKES
F H Used in
For Use With Butt Diameter Centerline to Angle Tube Yoke & Tube Yoke
Tube Diameter & Wall Point of Weld Yoke Assembly Part Number
1330 SERIES E-3.875 D-1.062 USE KIT 5-213X, 5-790X, 5-812X, 5-791X
2.0000X.1200W 1.7660 2.1200 — 2-28-2777
2.5000X.0830W 2.3440 1.7190 25.0 2-28-1707
2.5000X.0830W 2.3440 2.5370 25.0 2-28-3347
3.0000X.0650W 2.8750 1.7190 25.0 2-28-1177
3.0000X.0830W 1.9440 1.7190 25.0 2-28-1697
3.5000X.0650W 3.1250 1.8120 — 2-28-1977
3.5000X.0830W 3.3440 1.8120 20.0 2-28-1717
3.5000X.1200W 3.2720 1.8370 — 2-28-2757
Material: aluminum
3.7500X.0830W 3.6040 2.1300 — 2-28-3717
Material: aluminum
4.0000X.0650W 3.8700 1.6900 — 2-28-3787
4.0000X.0830W 3.8530 2.1250 — 2-28-3317
Alum.- use special coated U-Joints; Use plug #232639 in vent
4.0000X.0830W 3.8530 2.1300 — 2-28-3377
Material: aluminum
4.0000X.0830W 3.8530 2.4060 15.0 2-28-3327
Material: aluminum
4.1600X.0830W 3.9980 2.1300 — 2-28-3687
Material: aluminum
4.1600X.0870W 3.9980 2.4060 — 2-28-3517
Material: aluminum
4.5000X.0630W 4.3860 4.0000 — 5001484
Material: aluminum
4.5200X.0750W 4.3880 2.1300 17.0 2-28-3507
Alum.- use special coated U-Joints; Use plug #232639 in vent
5.0000X.0630W 4.8880 4.1100 — 2-28-3527
Material: aluminum
5.0000X.0650W 4.8880 1.8200 — 2-28-3487
Material: aluminum

1350 SERIES E-3.875 D-1.188 USE KIT 5-178X, 5-799X, 5-800X

2.0000X.1200W 1.7660 2.1250 30.0 3-28-777
2.5000X.0830W 2.3440 1.9380 20.0 3-27-1 3-28-47
2.7500X.0650W 2.6250 2.0310 20.0 3-28-1107
3.0000X.0830W 2.8440 2.0000 20.0 3-27-2 3-28-57
3.0000X.0830W 2.8440 2.0310 20.0 3-28-1157
3.0000X.0950W 2.8120 2.0000 — 3-28-157
3.0000X.1340W 2.7340 1.9700 — 3-28-1137
3.5000X.0650W 3.3750 1.8120 20.0 3-27-5 3-28-257
3.5000X.0830W 3.3440 1.8400 20.0 3-28-427
3.5000X.1200W 3.2700 1.8370 — 3-28-977
Material: aluminum
3.5000X.1560W 3.1880 1.8370 — 3-28-1197
Material: aluminum
4.0000X.0830W 3.8440 1.6880 21.0 3-28-417
4.0000X.0830W 3.8530 2.1300 — 3-28-1297
Material: aluminum
4.0000X.0830W 3.8530 2.4100 — 3-28-1307
Material: aluminum
4.1600X.0830W 3.9980 2.1300 — 3-28-1617
Material: aluminum
4.1600X.0830W 3.9980 2.4100 — 3-28-1437
Material: aluminum
5.0000X.0630W 4.8880 4.1100 — 3-28-1447
Material: aluminum
5.0000X.0650W 4.8880 1.8400 — 5001701
Material: aluminum
5.0000X.0650W 4.8880 1.8440 — 3-28-1347
Material: aluminum

Important: See Safety Information in General Information Section (J300P-GI) 7

 J300P-5
TUBE YOKES

OSR Style

F H Used in
For Use With Butt Diameter Centerline to Angle Tube Yoke & Tube Yoke
Tube Diameter & Wall Point of Weld Yoke Assembly Part Number
1410 SERIES E-4.438 D-1.188 USE KIT 5-160X, 5-801X OR 5-802X
2.5000X.0950W 2.3120 2.0000 — 3-28-327
2.5000X.1560S 2.1880 2.0000 — 3-26-437
2.7500X.0830W 2.5940 1.6250 — 3-28-987
3.0000X.0830W 2.8440 1.6250 8.0 3-28-447
3.0000X.0830W 2.8440 2.1250 30.0 3-27-3 3-28-97
3.0000X.0950W 2.8120 2.1250 30.0 3-27-6 3-28-267
3.0000X.2500W 2.5000 1.6250 — 3-28-1117
3.5000X.0650W 3.3750 2.1250 30.0 3-27-8 3-28-367
3.5000X.0830W 3.3440 2.1250 30.0 3-27-4 3-28-557
3.5000X.0950W 3.3120 2.1250 — 3-28-857
4.0000X.0650W 3.8700 2.5000 30.0 3-28-1267
4.0000X.0830W 3.8440 1.8750 22.0 3-27-16 3-28-457
4.0000X.0830W 3.8530 2.2900 — 3-28-1607
Material: aluminum
4.0000X.0830W 3.8530 2.2900 — 3-28-1637
Material: aluminum
4.0000X.0950W 3.8120 1.8750 — 3-28-387
4.0000X.1030W 3.8120 2.1250 — 3-28-1537
Material: aluminum
4.0950X.1800W 3.7430 2.0300 — 3-28-1087
4.5000X.0980W 4.3250 2.1250 — 3-28-1387
Material: aluminum
4.5100X.0630W 4.3840 2.2900 — 3-28-1547
Alum.- use special coated U-Joints; Use plug #232639 in vent
4.5100X.0630W 4.3840 2.2900 — 3-28-1597
Material: aluminum
5.0000X.0630W 4.8880 2.2810 — 3-28-1647
Material: aluminum
5.0000X.0630W 4.8880 4.1090 — 3-28-1657
Material: aluminum
1480 SERIES E-4.438 D-1.375 USE KIT 5-188X OR 5-803X
3.0000X.0950W 2.8120 1.6880 8.0 3-28-497
3.5000X.0830W 3.3440 2.0310 22.0 3-27-22 3-28-537
3.5000X.0830W 3.3440 2.3120 35.0 3-28-547
3.5000X.0950W 3.3120 2.0310 22.0 3-28-567
4.0000X.0830W 3.8440 2.0310 22.5 3-27-20 3-28-507
4.0000X.0950W 3.8120 2.0310 22.5 3-28-627

1550 SERIES E-5.250 D-1.375 USE KIT 5-155X OR 5-808X

3.5000X.0950W 3.3120 1.8440 8.0 4-28-257
3.5000X.0950W 3.3120 2.1880 22.5 4-27-18 4-28-307
3.5000X.0950W 3.3120 2.6880 35.0 4-27-16 4-28-417
3.5000X.1340W 3.2500 1.8100 — 4-28-627
3.5000X.1340W 3.2500 2.1880 22.5 4-28-487
3.5000X.1560W 3.1880 2.1880 — 4-28-657
4.0000X.0830W 3.8440 2.1880 22.5 4-28-277
4.0000X.0950W 3.8120 2.1880 22.5 4-28-297

8 Important: See Safety Information in General Information Section (J300P-GI)

J300P-5
TUBE YOKES

BP Style WB Style

F H Used in
For Use With Butt Diameter Centerline to Angle Tube Yoke & Tube Yoke
Tube Diameter & Wall Point of Weld Yoke Assembly Part Number
1610 SERIES E-5.312 D-1.875 USE KIT 5-279X OR 5-674X
3.5000X.0950W 3.3120 3.0000 35.0 5-27-7 5-28-167
3.5000X.1340W 3.2500 3.0000 35.0 5-27-25 5-28-627
3.5000X.1340W 3.2500 3.0000 35.0 5-28-717
3.5000X.1340W 3.2500 3.8100 — 5-28-887
3.5000X.1550W 3.1880 3.0000 — 5-28-957
3.5000X.1560W 3.1880 3.0000 35.0 5-27-9 5-28-207
3.5500X.2070W 3.1410 2.2200 — 5-28-837
3.5500X.2070W 3.1410 2.2200 — 5-28-977M
Metric bolt holes; uses 5-585XM u-joint
3.5500X.2070W 3.1410 3.0000 — 5-28-967
4.0000X.1340W 3.7340 3.0000 — 5-28-327

1710 SERIES E-6.094 D-1.938 USE KIT 5-280X OR 5-675X

3.5000X.1560W 3.1880 3.0310 22.0 6-27-7 6-28-137
4.0000X.1340W 3.7340 3.0310 30.0 6-27-17 6-28-347
4.0000X.1340W 3.7340 3.0310 30.0 6-28-557M
4.0000X.1340W 3.7340 3.6880 45.0 6-28-467
4.0000X.1340W 3.7340 4.0600 — 6-28-527
4.5000X.1340W 4.2340 3.0310 22.0 6-28-407

1760 SERIES E-7.000 D-1.938 USE KIT 5-407X OR 5-677X

4.0950X.1800W 3.7340 3.0310 30.0 6.3-28-17

1810 SERIES E-7.547 D-1.938 USE KIT 5-281X OR 5-676X

3.5500X.2070W 3.1410 3.3750 30.0 6.5-28-137
4.5000X.1340W 4.2340 3.3750 30.0 6.5-27-9 6.5-28-117
4.5000X.2590W 3.9840 3.3750 30.0 6.5-28-127

1880 SERIES E-8.094 D-2.188 USE KIT 5-308X

4.5000X.2590W 3.9840 4.0000 22.5 8-28-147

1950 SERIES E-10.094 D-3.062 USE KIT 5-192X

6.0000X.5000S 5.1250 6.5310 20.0 9-26-18X

5C SERIES WB STYLE P=4.530 S=1.688 KEYWAY=.561 USE KIT 5-345X

2.5000X.1590W 2.1820 2.2240 30.0 5C-28-27
.375-24 threaded holes

6C SERIES WB STYLE P=5.530 S=1.688 KEYWAY=.561 KITS:6CX 6C-1X 6C-2X 6C-3X

2.7500X.1590W 2.4320 1.8700 30.0 6C-28-27
.375-24 threaded holes

Important: See Safety Information in General Information Section (J300P-GI) 9

 J300P-5
BALL STUD TUBE YOKES
For Constant Velocity Applications

For Use With F K H Ball Stud Ball Stud

Tube Butt Centerline Centerline L H Angle Slinger Tube Yoke
Diameter Diameter to Point to End of Length Diameter Assembly
& Wall Thickness of Weld Ball Stud Part Number
1210 SERIES E-2.688 D-1.062 USE KIT 5-443X
2.5000X.0650 W 2.3750 1.3100 1.6410 .5940 .5000 10.5 231413 2-28-2407X
2.5000X.0830 W 2.3340 1.3100 1.6400 .5940 .5000 — 231413 2-28-3657X

1310 SERIES E-3.469 D-1.062 USE KIT 5-153X, 5-785X, 5-810X, 5-786X
1.2500X.1200 W 1.0160 1.5000 1.6410 .5940 .5000 13.0 231864 2-28-2997X
1.7500X.0950 W 1.5620 1.4400 1.6410 .5940 .5000 — 231864 2-28-2937X
1.7500X.0950 W 1.5620 1.4400 1.6410 .5940 .5000 — 2-86-418 2-28-2827X
2.0000X.1200 W 1.7660 1.4400 1.6410 .5940 .5000 — 2-86-418 2-28-2867X
2.0000X.1200 W 1.7660 1.4400 1.6410 .5940 .5000 13.0 231864 2-28-2947X
2.5000X.0650 W 2.3750 1.4400 1.6410 .5940 .5000 — 2-86-418 2-28-3087X
2.5000X.0830 W 2.3440 1.4400 1.6410 .5940 .5000 — 2-86-418 2-28-2887X
2.5000X.0830 W 2.3440 1.4400 1.6410 .5940 .5000 13.0 231864 2-28-2957X
2.7500X.0650 W 2.6250 1.2810 1.6410 .5940 .5000 13.0 2-86-418 2-28-2747X
2.7500X.0650 W 2.6250 1.2810 1.6410 .5940 .5000 13.0 231864 2-28-2987X
2.7500X.0830 W 2.5840 1.4400 1.6410 .5940 .5000 — 231864 2-28-3817X
3.0000X.0650 W 2.8750 1.4400 1.6410 .5940 .5000 — 2-86-418 2-28-2907X
3.0000X.0650 W 2.8750 1.4400 1.6410 .5940 .5000 13.0 231864 2-28-2967X
3.0000X.0830 W 2.8440 1.4400 1.6410 .5940 .5000 — 2-86-418 2-28-2927X
3.0000X.0830 W 2.8440 1.4400 1.6410 .5940 .5000 13.0 231864 2-28-2977X

1330 SERIES E-3.875 D-1.062 USE KIT 5-213X, 5-790X, 5-812X, 5-791X
2.0000X.1200 W 1.7660 1.3750 1.6700 .5900 .5000 — 2-86-418 2-28-3257X
2.0000X.1200 W 1.7660 1.3750 1.6700 .5900 .5000 13.0 231259 2-28-2157X
2.5000X.0830 W 2.3440 1.3750 1.6700 .5900 .5000 — 2-86-418 2-28-3067X
2.5000X.0830 W 2.3440 1.3750 1.6700 .5900 .5000 13.0 231259 2-28-2137X
2.5000X.0950 W 2.3120 1.3750 1.6700 .5900 .5000 — 2-86-418 2-28-3277X
3.0000X.0650 W 2.8750 1.3750 1.7500 .6880 .6090 — 230962 2-28-1277X
3.0000X.0650 W 2.8750 1.4400 1.6700 .4220 .5000 13.0 231259 2-28-2117X
3.0000X.0830 W 2.8440 1.3750 1.6700 .5900 .5000 — 2-86-418 2-28-3447X
3.0000X.0830 W 2.8440 1.4400 1.6700 .5900 .5160 13.0 231259 2-28-2187X

1350 SERIES E-3.875 D-1.188 USE KIT 5-178X, 5-799X, 5-800X

2.7500X.0830 W 2.6110 1.4400 1.7320 .5900 .5000 13.0 2-86-418 3-28-1747X
3.0000X.0830 W 2.8440 1.4400 1.7320 .5900 .5000 13.0 3-28-1317
3.0000X.0830 W 2.8440 1.4440 1.7320 .5900 .5000 13.0 2-86-418 3-28-1327X
3.5000X.0830 W 3.3440 1.4380 1.7320 .5900 .5000 — 3-28-1517
3.5000X.0830 W 3.3440 1.4400 1.7320 .5900 .5000 — 2-86-418 3-28-1527X

10 Important: See Safety Information in General Information Section (J300P-GI)

J300P-5 SLINGERS AND SEALS

230962 231259 231413

231864 Seal
2-86-418

11
 PART NUMBER INDEX J300P-5

1-26-297 .................................... 6 2-28-2747X ............................. 10 2-28-447 .................................... 6

1-28-107 .................................... 6 2-28-2757 .................................. 7 2-28-477 .................................... 6
10-26-37 .................................... 6 2-28-277 .................................... 6 2-28-547 .................................... 6
10-26-47 .................................... 4 2-28-2777 .................................. 7 2-28-557 .................................... 6
10-27-1 ...................................... 6 2-28-2787 .................................. 6 2-28-577 .................................... 6
10-28-17 .................................... 6 2-28-2827X ............................. 10 250-28-17 .................................. 5
10-28-97 .................................... 6 2-28-2867X ............................. 10 3-26-317 .................................... 4
100-28-17 .................................. 5 2-28-2887X ............................. 10 3-26-437 .................................... 8
100-28-27 .................................. 5 2-28-2907X ............................. 10 3-26-577 .................................... 4
140-28-17 .................................. 5 2-28-2927X ............................. 10 3-26-667 .................................... 4
140-28-27 .................................. 5 2-28-2937X ............................. 10 3-26-677 .................................... 4
170-28-17 .................................. 5 2-28-2947X ............................. 10 3-26-717 .................................... 4
170-28-27 .................................. 5 2-28-2957X ............................. 10 3-26-757 .................................... 4
170-28-37 .................................. 5 2-28-2967X ............................. 10 3-27-1 ........................................ 7
2-26-147 .................................... 6 2-28-2977X ............................. 10 3-27-16 ...................................... 8
2-26-177 .................................... 4 2-28-2987X ............................. 10 3-27-2 ........................................ 7
2-26-187 .................................... 6 2-28-2997X ............................. 10 3-27-20 ...................................... 8
2-26-257 .................................... 4 2-28-3027 .................................. 6 3-27-22 ...................................... 8
2-26-347 .................................... 6 2-28-3067X ............................. 10 3-27-3 ........................................ 8
2-26-457 .................................... 4 2-28-307 .................................... 6 3-27-4 ........................................ 8
2-26-467 .................................... 4 2-28-3087X ............................. 10 3-27-5 ........................................ 7
2-26-477 .................................... 4 2-28-3187 .................................. 6 3-27-6 ........................................ 8
2-26-497 .................................... 4 2-28-3207 .................................. 6 3-27-8 ........................................ 8
2-26-507 .................................... 4 2-28-3257X ............................. 10 3-28-1087 .................................. 8
2-26-527 .................................... 4 2-28-327 .................................... 6 3-28-1107 .................................. 7
2-27-10 ...................................... 6 2-28-3277X ............................. 10 3-28-1117 .................................. 8
2-27-12 ...................................... 6 2-28-3317 .................................. 7 3-28-1137 .................................. 7
2-27-24 ...................................... 6 2-28-3327 .................................. 7 3-28-1157 .................................. 7
2-27-4 ........................................ 6 2-28-3347 .................................. 7 3-28-1197 .................................. 7
2-27-5 ........................................ 6 2-28-3367 .................................. 6 3-28-1267 .................................. 8
2-27-6 ........................................ 6 2-28-3377 .................................. 7 3-28-1297 .................................. 7
2-27-7 ........................................ 6 2-28-3447X ............................. 10 3-28-1307 .................................. 7
2-27-9 ........................................ 6 2-28-3487 .................................. 7 3-28-1317 ................................ 10
2-28-1177 .................................. 7 2-28-3507 .................................. 7 3-28-1327X ............................. 10
2-28-1277X ............................. 10 2-28-3517 .................................. 7 3-28-1347 .................................. 7
2-28-1507 .................................. 6 2-28-3527 .................................. 7 3-28-1387 .................................. 8
2-28-1617 .................................. 6 2-28-357 .................................... 6 3-28-1437 .................................. 7
2-28-1697 .................................. 7 2-28-3637 .................................. 6 3-28-1447 .................................. 7
2-28-1707 .................................. 7 2-28-3657X ............................. 10 3-28-1517 ................................ 10
2-28-1717 .................................. 7 2-28-367 .................................... 6 3-28-1527X ............................. 10
2-28-1757 .................................. 6 2-28-3687 .................................. 7 3-28-1537 .................................. 8
2-28-1947 .................................. 6 2-28-3697 .................................. 6 3-28-1547 .................................. 8
2-28-1977 .................................. 7 2-28-3717 .................................. 7 3-28-157 .................................... 7
2-28-2117X ............................. 10 2-28-3787 .................................. 7 3-28-1597 .................................. 8
2-28-2137X ............................. 10 2-28-3817X ............................. 10 3-28-1607 .................................. 8
2-28-2157X ............................. 10 2-28-3837 .................................. 6 3-28-1617 .................................. 7
2-28-2187X ............................. 10 2-28-397 .................................... 6 3-28-1637 .................................. 8
2-28-2407X ............................. 10 2-28-417 .................................... 6 3-28-1647 .................................. 8
2-28-2417 .................................. 6 2-28-427 .................................... 6 3-28-1657 .................................. 8
2-28-2427 .................................. 6 2-28-437 .................................... 6 3-28-1747X ............................. 10

12 Important: See Safety Information in General Information Section (J300P-GI)

J300P-5 PART NUMBER INDEX

3-28-257 .................................... 7 6.3-28-17 ................................... 9

3-28-267 .................................... 8 6.5-27-9 ..................................... 9
3-28-327 .................................... 8 6.5-28-117 ................................. 9
3-28-367 .................................... 8 6.5-28-127 ................................. 9
3-28-387 .................................... 8 6.5-28-137 ................................. 9
3-28-417 .................................... 7 6-27-17 ...................................... 9
3-28-427 .................................... 7 6-27-7 ........................................ 9
3-28-447 .................................... 8 6-28-137 .................................... 9
3-28-457 .................................... 8 6-28-347 .................................... 9
3-28-47 ...................................... 7 6-28-407 .................................... 9
3-28-497 .................................... 8 6-28-467 .................................... 9
3-28-507 .................................... 8 6-28-527 .................................... 9
3-28-537 .................................... 8 6-28-557M ................................. 9
3-28-547 .................................... 8 6C-28-27 ................................... 9
3-28-557 .................................... 8 70-28-27 .................................... 5
3-28-567 .................................... 8 8-28-147 .................................... 9
3-28-57 ...................................... 7 9-26-18X ................................... 9
3-28-627 .................................... 8 90-28-17 .................................... 5
3-28-777 .................................... 7 90-28-27 .................................... 5
3-28-857 .................................... 8
3-28-97 ...................................... 8
3-28-977 .................................... 7
3-28-987 .................................... 8
4-26-437 .................................... 4
4-27-16 ...................................... 8
4-27-18 ...................................... 8
4-28-257 .................................... 8
4-28-277 .................................... 8
4-28-297 .................................... 8
4-28-307 .................................... 8
4-28-417 .................................... 8
4-28-487 .................................... 8
4-28-627 .................................... 8
4-28-657 .................................... 8
5001484 .................................... 7
5001701 .................................... 7
5-27-25 ...................................... 9
5-27-7 ........................................ 9
5-27-9 ........................................ 9
5-28-167 .................................... 9
5-28-207 .................................... 9
5-28-327 .................................... 9
5-28-627 .................................... 9
5-28-717 .................................... 9
5-28-837 .................................... 9
5-28-887 .................................... 9
5-28-957 .................................... 9
5-28-967 .................................... 9
5-28-977M ................................. 9
5C-28-27 ................................... 9

Important: See Safety Information in General Information Section (J300P-GI) 13

 NOTES J300P-5

14 Important: See Safety Information in General Information Section (J300P-GI)

J300P-5 CATALOG COMMENT FORM

Dana Corporation strives to publish catalogs that are as accurate and user-friendly as possible.
Continuous improvement is our ongoing mission. Therefore, we welcome any and all of our customers'
comments. Please forward your comments with any suggested improvements or corrections to our
Catalog Department via Fax or mail.
Fax: Product Management / Catalog Department
(419) 866-3924
Mail: Dana Corporation
Heavy Vehicle Technologies and Systems Service
Attn: Product Management / Catalog Department
PO Box 321
Toledo, OH 43697-0321

Comments and Suggested Improvement/Corrections Page Number Part Number

Important: See Safety Information in General Information Section (J300P-GI) 15

Dana Corporation Dana Corporation Dana Corporation
Heavy Vehicle Technologies and Heavy Vehicle Technologies and Heavy Vehicle Technologies and
Systems Service Systems Service - Canada Systems Service - International
PO Box 321 5095 South Service Road (419) 861-6325
Toledo, Ohio 43697-0321 Beamsville, Ontario LOR 1BO
1-800-SAY-DANA (729-3262) Tech Service: (905) 563-4991
www.dana.com
www2.dana.com/expert

J300P-5 Copyright Dana Corporation, 2004.

7/04 All rights reserved.
Printed in U.S.A