SQR 05.2 – SQR 14.

2
Electrical data Part-turn actuators for modulating duty with 1-phase AC motors
Intermittent duty S4 - 20 %, 110 V – 120 V/60 Hz

Part-turn actuator Motor

Over- AUMA
current power class
Operating Oper- Nomi- protection switchgear
time Max. Nominal ating nal cur- Max. Starting device
for 90° torque power1) Speed capaci- rent3) current4) current setting Contac-
Type in seconds [Nm] Motor type PN [kW] [rpm] tor2) [µF] IN (A) Imax [A] IA [A] cos ϕ [A] tor Thyristor
6 2.7 3.2 5.4 0.98 3.2 A1 B1
VW0R063-4-0,04 0.04 1,680 50
9 2.7 3.1 5.4 0.98 3.1 A1 B1
SQR 12 1.7 1.8 4.9 0.84 1.8 A1 B1
150 VW0R063-4-0,02 0.02 1,680 35
05.2 17 1.7 1.8 4.9 0.84 1.8 A1 B1
25 SW0R063-4-0,01 1,680 35 1.6 1.7 4.9 0.82 1.7 A1 B1
0.01
50 SW0R063-8-0,01 840 25 1.8 1.8 2.1 0.99 1.8 A1 B1
6 3.5 4.4 8.5 0.98 4.4 A1 B1
VW0R063-4-0,06 0.06 1,680 90
9 3.5 4.2 8.5 0.98 4.2 A1 B1
SQR 12 2.6 3.1 5.4 0.98 3.1 A1 B1
300 VW0R063-4-0,03 0.03 1,680 50
07.2 17 2.6 3.0 5.4 0.98 3.0 A1 B1
25 SW0R063-4-0,01 1,680 35 1.6 1.9 4.9 0.82 1.9 A1 B1
0.01
50 SW0R063-8-0,01 840 25 1.8 1.9 2.1 0.99 1.9 A1 B1
9 VW0R063-4-0,10 0.10 1,680 90 4.3 5.7 8.8 0.98 5.7 A1 B1
12 2.9 3.9 7.7 0.96 3.9 A1 B1
SW0R063-4-0,06 0.06 1,680 70
SQR 17 2.9 3.5 7.7 0.96 3.5 A1 B1
600
10.2 25 2.7 3.2 5.4 0.98 3.2 A1 B1
SW0R063-4-0,04 0.04 1,680 50
35 2.7 3.0 5.4 0.98 3.0 A1 B1
50 SW0R063-4-0,02 0.02 1,680 35 1.7 1.8 4.9 0.84 1.8 A1 B1
12 900 4.3 5.6 8.8 0.98 5.6 A1 B1
VW0R063-4-0,10 0.10 1,680 90
17 4.3 5.7 8.8 0.98 5.7 A1 B1
25 2.9 3.9 7.7 0.96 3.9 A1 B1
SQR SW0R063-4-0,06 0.06 1,680 70
35 2.9 3.5 7.7 0.96 3.5 A1 B1
12.2 1,200
50 2.7 3.2 5.4 0.98 3.2 A1 B1
SW0R063-4-0,04 0.04 1,680 50
75 2.7 3.2 5.4 0.98 3.2 A1 B1
108 SW0R063-4-0,02 0.02 1,680 35 1.7 1.8 4.9 0.84 1.8 A1 B1
30 1,800 4.3 5.6 8.8 0.98 5.6 A1 B1
VW0R063-4-0,10 0.10 1,680 90
SQR 40 4.3 5.7 8.8 0.98 5.7 A1 B1
14.2 60 2,400 2.9 3.9 7.7 0.96 3.9 A1 B1
SW0R063-4-0,06 0.06 1,680 70
85 2.9 3.5 7.7 0.96 3.5 A1 B1

1) – 4) Refer to Notes on Electrical data SQ .2/SQR .2 part-turn actuators with 1-phase AC motors
We reserve the right to alter data according to improvements made. Previous documents become invalid with the issue of this document.

Y006.302/003/en Issue 2.18 Page 1/2

SQR 05.2 – SQR 14.2
Electrical data Part-turn actuators for modulating duty with 1-phase AC motors
Intermittent duty S4 - 20 %, 110 V – 120 V/60 Hz

Installation and sizing

Motor data Motor data is approximate. Due to usual manufacturing tolerances, there may be deviations from the values
given.
Motor protection To protect against overheating, thermoswitches or PTC thermistors are embedded in the motor windings.

Actuators without integral actuator controls (AUMA NORM):

Thermoswitches or PTC thermistors have to be considered within the external controls (refer to terminal
plan).
Note: Failure to connect thermoswitches or PTC thermistors shall void the warranty for the motor.
Rating of the thermoswitches
AC current DC current
250 V, 50 – 60 Hz 60 V 1.0 A
cos j = 1 2.5 A 42 V 1.2 A
cos j = 0.6 1.6 A 24 V 1.5 A

Actuators with AM or AC integral actuator controls:

Thermal motor protection is already integrated.
Mains voltage, mains frequency Permissible variation of mains voltage: ±10 %
Permissible variation of mains frequency: ±5 %
Terminal plan
Part-turn actuators Motor (type) Terminal plan
SQ 05.2 – SQ 14.2 VW.../SW... TPA01R1AA-101-000
SQR 05.2 – SQR 14.2 VW.../SW... TPA01R1AA-001-000
For further information refer to "Technical data Part-turn actuators SQ 05.2 – SQ 14.2 / SQR 05.2 – SQR 14.2
with 1-phase AC motors"
Switchgear sizing For motor operation, reversing contactors (mechanically, electrically and electronically locked) or thyristors
(electronically locked) can be used.

Actuators without integral actuator controls (AUMA NORM):

Switchgear are supplied by the customer. We recommend specification of switchgear suitable for their rated
operating power/motor power in compliance with the assigned AUMA power class.
Switchgear assignment to AUMA power classes:
AUMA Reversing contactor Reversing contactor
power class Rated operating power acc. to EN Motor power
60947-4-1 according to UL/CSA at
Utilization category AC-3
400 V AC 480 V AC 600 V AC
A1 4.0 kW 5.0 hp 5.0 hp
AUMA Thyristor
power class Rated operating current acc. to
EN 60947-4-2
Utilization category AC-53a
400 V AC
B1 6A

Actuators with AM or AC integral actuator controls:

Required switchgear in power classes A1 or B1 are directly integrated in AM or AC actuator controls.

Notes on Electrical data SQ .2/SQR .2 part-turn actuators with 1-phase AC motors

1) Nominal power PN Mechanical power output at motor shaft at run torque of part-turn actuator (corresponds to approx. 35 %
of maximum torque).
The consumed electrical power can be calculated using the following formula:
P = U x I x cos ϕ
2) Permanent split/starting capacitor For VW/SW motors, permanent split capacitors are integrated within the motor.
3) Nominal current IN Current at run torque
4) Max. current Imax Current at maximum torque

We reserve the right to alter data according to improvements made. Previous documents become invalid with the issue of this document.

Y006.302/003/en Issue 2.18 Page 2/2