Scribd
Upload
60 views1 page

Doctec

This document provides specifications for standard series fittings used for crimping ferrules onto convoluted PTFE tubing. It lists part numbers, sizes in DN units, lengths, and various diameter measurements in mm for each fitting size ranging from 1/4" to 2". The document notes that the information is from a technical catalog and may be modified without notice, and that the manufacturer is not responsible for issues from misuse except defects.

Uploaded by

Tadas P
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
60 views1 page

Doctec

This document provides specifications for standard series fittings used for crimping ferrules onto convoluted PTFE tubing. It lists part numbers, sizes in DN units, lengths, and various diameter measurements in mm for each fitting size ranging from 1/4" to 2". The document notes that the information is from a technical catalog and may be modified without notice, and that the manufacturer is not responsible for issues from misuse except defects.

Uploaded by

Tadas P
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Standard series fittings

Crimping ferrules
Ferrules for Convoluted PTFE

Mild Steel 1.0737 (EN 10.277-3) 1/1

Part nº DN L ØA ØC ØD

210410400 1/4" 30 12,5 11,2 16


210410600 3/8" 30 17,8 15,5 21,5
210410800 1/2" 32 21 18,6 25
210411000 5/8" 36 24,5 22 29
210411201 3/4" 40 28 25,2 32
210411600 1" 50 34,8 33 40
210412001 1"1/4 59 42 39,6 46
210412400 1" 1/2 63 49 44,3 55
210413200 2" 70 63 60 69

The information gathered in this technical documentation (Catalogue) has an informative character and can be modified without previous notice. DICSA will not accept any type
of responsibility resulting from an inappropriate use of the product, except the ones related to manufacturing defects.

Printed on: 08/08/2020 at 01:36

You might also like