Low Pressure Transmitter

in Short and Compact Design S I S

Main features

● Measuring ranges 0…10 mbar to 0…40 bar

● Standard signals for the industry, hydraulics and pneumatics
● Plug systems MVS/A acc. to DIN EN 175301-803 A, MVS/C
acc. to DIN EN 175301-803 C
● small design ~ max. 50 mm in length
● large variety of electrical connections

Applications

● General industrial applications

● Hydraulics
● Pneumatics
● Mechanical engineering
● Automotive industry
● Plant engineering and automation technology

Description

The SIS low-pressure transducer distinguishes itself by its very short and compact design.
This allows for a higher degree of integrating it, so that the SIS can also be installed in
very limited spaces. At the same time, the SIS is stable, reliable and features a high
degree of variability in both electrical and mechanical connection. Its proven mo-
dular concept also permits to use the types of signaling most common in industry,
and to manufacture it reasonably, also in low quantities.
S I S Low Pressure Transmitter
in Short and Compact Design

Specifications
PRESSURE RANGE
Measuring range* p [mbar] 10 16 20 25 40 60 100
Overload pressure p [mbar] 50 80 100 125 200 300 500
Burst pressure p [mbar] 150 240 300 375 600 900 1500
Measuring range* p [mbar] 160 200 250 400 600 1000
Overload pressure p [mbar] 800 1000 1250 1200 1800 3000
Burst pressure p [mbar] 2000 2000 2000 2000 3000 5000
Measuring range* p [bar] 1,6 2,0 2,5 4,0 6,0 10,0
Overload pressure p [bar] 6 6 6 10 20 20
Burst pressure p [bar] 9 9 9 15 30 30
Measuring range* p [bar] 16 20 25 40
Overload pressure p [bar] 40 40 100 100 (vaccum, relative pressure, +-
Burst pressure p [bar] 60 60 150 150 or absolute pressure are available)

ELECTRICAL PARAMETER
2-wire 3-wire 3-wire 3-wire
Output signal* 4...20 mA 0...10 V 0...5 V 0,5...4,5 V ratiometric
Supply voltage US [VDC] 10...32** 12...32 8...32 5 ± 10 %
Load resistor RA in Ohm RA=(Us-10V)/0,02A ≥4.7kΩ ≥4.7kΩ ≥4.7kΩ
Response time t [ms] ≤2 ≤1 ≤1 ≤1
Maximum supply current I [mA] 23 10 10 7,5
Isolation voltage* U [VDC] 50 ** > AppNote (see www.adz.de)

ACCURACY
Accuracy @ RT % of the range ≤ 1,00*** Option ≤ 0,5 *** incl. nonlinearity, hysteresis, repeatability, zero-offsetand
BFSL ≤ 0,25 final-offset (acc. to IEC 61298-2)
Non-linearity % of the range ≤ 0,15
Stability/year % of the range ≤ 0,10

ACCEPTABLE TEMPERATURE RANGES

Measuring medium T [°C] -40...85
Ambience T [°C] -40...85
Storage T [°C] -40...85
Compensated range**** T [°C] -10...70 **** The mean TC are relevant for the compensated range only,
Mean TC offset % of the range ≤ 0,15 / 10K outside the compensated range the total error statements apply.
Mean TC range % of the range ≤ 0,15 / 10K
Total error % of the range -40°C 3,00%
% of the range 85°C 3,00%

MECHANICAL PARAMETER
Wetted components silicon, NBR O-ring, aluminium, plastic (e.g. PA66)
Housing* stainless steel
Weight m [g] 80-120 depending on design
Shock resistance/drop g 1000 acc. to DIN EN 60068-2-32 – free fall
Vibration resistance g 20 acc. to DIN EN 60068-2-6 – vibration sinusoidal
Shock resistance/constant g 25 acc. to DIN EN 60068-2-27 – shock
Approvals CE Declarations of conformity 2014/30/EU, 2014/68/EU
IP system of protection (IEC 605029) up to IP69K The IP system of protection as specified in the data sheets generally applies,
with appropriate mating plug connected.
 Low Pressure Transmitter
in Short and Compact Design S I S
Configurations -examples- SIS with
Round connector DIN 72585 Junior-Timer connector

Electrical connections* -examples-

MVS/C MVS/A Junior-Timer Packard- Superseal

DIN EN 175301-803 DIN EN 175301-803 connector connector connector

Round connector Deutsch-

DIN 72585 connector 4-contacts

Pressure Connections* -examples-

G ¼ A; ¼ NPT M 14x1,5; 7/16-20UNF-2A 3/8-24UNF-2A

DIN 3852; Form E DIN 3852; Form E SAE 514

* customer specific configurations available

 S I S Low Pressure Transmitter
in Short and Compact Design

Electrical Configuration*

Plug M12x1 Cable DIN EN DIN EN Packard JuniorTimer

port 175301-803-A 175301-803-C Metripack
1 1 B
4 3
1

3 3 2
C
3
1 2
2 2 A

2-wire 2-wire 2-wire 2-wire 2-wire 2-wire

1: UB+ rt: UB+ 1: UB+ 1: UB+ A: UB+ 1: UB-

2: nc sw: out 2: out 2: out B: UB+ 2: out
3: out ws: nc 3: nc 3: nc C: out 3: UB+
4: nc : nc : nc
3-wire 3-wire 3-wire 3-wire 3-wire* 3-wire*

1: UB+ rt: UB+ 1: UB+ 1: UB+

2: nc sw: UB- 2: UB- 2: UB-
3: UB- ws: out 3: out 3: out
4: out : nc : nc

nc = not connected
The electrical connection must be made in accordance with the respective connection diagram unless otherwise agreed upon.
* custom-made adjustments are possible
Product line
DS5 Electronic Pressure Switch SME Pressure Transmitter in Miniature Design
DPSX9I Intrinsically Safe Electronic Pressure Switch for Current SMF Pressure Transmitter with Flush Diaphragm
DPSX9U Intrinsically Safe Electronic Pressure Switch for Voltage SMH High Pressure Transmitter
PS1/17 Level Sensor SML Pressure Transmitter for Industrial Application
PSX2 Intrinsically Safe Level Sensor SMO Pressure Transmitter in Mobile Hydraulics
SHP High Precision Pressure Transmitter SMS OEM Pressure Transmitter for Hydraulics and Pneumatics
SIS Low Pressure Transmitter in Short and Compact Design SMX Intrinsically Safe Pressure Transmitter for Industrial Application
SIL Low Pressure Transmitter for Industrial Application SMX2 Intrinsically Safe Pressure Transmitter for Industrial Application
SKE High Temperature Pressure Transmitter with Detached Electronics TPSE Multi-Function Transmitter for Pressure and Temperature – external sensor
SKL High Temperature Pressure Transmitter with Cooling Fins TPSI Multi-Function Transmitter for Pressure and Temperature – internal sensor
SMC Pressure Transmitter with CANopen Interface and J1939

ADZ NAGANO GmbH

Gesellschaft für Sensortechnik
Bergener Ring 43 • D-01458 Ottendorf-Okrilla
Germany Subject to change
Phone: +49 (0) 35 205 / 59 69-30 • Fax: -59 due to technical progress.
Email: [email protected] www.adz.de Rev. C/2017