Oracle® Applications: User's Guide Release 12.1

Oracle® Applications
User's Guide
Release 12.1
Part No. E12896-02
April 2009
Oracle Applications User's Guide, Release 12.1
Part No. E12896-02
Copyright © 2000, 2009, Oracle and/or its affiliates. All rights reserved.
Primary Author: Leslie Studdard, Jennifer Collins, Mildred Wang, Melody Yang
Contributing Author: Anne Carlson
Oracle is a registered trademark of Oracle Corporation and/or its affiliates. Other names may be trademarks
of their respective owners.
This software and related documentation are provided under a license agreement containing restrictions on
use and disclosure and are protected by intellectual property laws. Except as expressly permitted in your
license agreement or allowed by law, you may not use, copy, reproduce, translate, broadcast, modify, license,
transmit, distribute, exhibit, perform, publish or display any part, in any form, or by any means. Reverse
engineering, disassembly, or decompilation of this software, unless required by law for interoperability, is
prohibited.
The information contained herein is subject to change without notice and is not warranted to be error-free. If
you find any errors, please report them to us in writing.
If this software or related documentation is delivered to the U.S. Government or anyone licensing it on behalf
of the U.S. Government, the following notice is applicable:
U.S. GOVERNMENT RIGHTS

Programs, software, databases, and related documentation and technical data delivered to U.S. Government
customers are "commercial computer software" or "commercial technical data" pursuant to the applicable
Federal Acquisition Regulation and agency-specific supplemental regulations. As such, the use, duplication,
disclosure, modification, and adaptation shall be subject to the restrictions and license terms set forth in the
applicable Government contract, and, to the extent applicable by the terms of the Government contract, the
additional rights set forth in FAR 52.227-19, Commercial Computer Software License (December 2007). Oracle
USA, Inc., 500 Oracle Parkway, Redwood City, CA 94065.
This software is developed for general use in a variety of information management applications. It is not
developed or intended for use in any inherently dangerous applications, including applications which may
create a risk of personal injury. If you use this software in dangerous applications, then you shall be
responsible to take all appropriate fail-safe, backup, redundancy and other measures to ensure the safe use of
this software. Oracle Corporation and its affiliates disclaim any liability for any damages caused by use of this
software in dangerous applications.
This software and documentation may provide access to or information on content, products and services
from third parties. Oracle Corporation and its affiliates are not responsible for and expressly disclaim all
warranties of any kind with respect to third party content, products and services. Oracle Corporation and its
affiliates will not be responsible for any loss, costs, or damages incurred due to your access to or use of third
party content, products or services.

Contents
Send Us Your Comments
Preface
1 Getting Started with Oracle Applications

Introduction............................................................................................................................... 1-1
Getting Started.......................................................................................................................... 1-2
2 Forms-Based Applications
Using Forms-Based Applications.............................................................................................. 2-1
The Forms Toolbar.................................................................................................................... 2-3
Entering Data in Forms............................................................................................................. 2-4
Searching for Data..................................................................................................................... 2-9
Customizing the Presentation of Data.................................................................................... 2-11
Running Reports and Programs.............................................................................................. 2-13
Monitoring Requests............................................................................................................... 2-16
Viewing Request Output........................................................................................................ 2-17
Exporting Records to a File..................................................................................................... 2-19
Attachments............................................................................................................................. 2-19
Defining Preferences with User Profile Options................................................................... 2-21
3 HTML-Based Applications
Using HTML-Based Applications............................................................................................. 3-1
Using Oracle E-Business Suite Secure Enterprise Search........................................................ 3-2
Querying and Viewing Data..................................................................................................... 3-6
Entering Data............................................................................................................................. 3-7
iii
Scheduling Requests and Request Sets.................................................................................... 3-9
Monitoring Requests................................................................................................................. 3-9
Using Attachments.................................................................................................................... 3-9
Personalizations...................................................................................................................... 3-11
A Using Help
Getting Help.............................................................................................................................. A-1
Searching For Help................................................................................................................... A-1
B Oracle Applications Accessibility Features

Oracle Applications Accessibility Features..............................................................................B-1
iv

Send Us Your Comments
Oracle Applications User's Guide, Release 12.1

Part No. E12896-02
Oracle welcomes customers' comments and suggestions on the quality and usefulness of this document.
Your feedback is important, and helps us to best meet your needs as a user of our products. For example:
• Are the implementation steps correct and complete?
• Did you understand the context of the procedures?
• Did you find any errors in the information?
• Does the structure of the information help you with your tasks?
• Do you need different information or graphics? If so, where, and in what format?
• Are the examples correct? Do you need more examples?
If you find any errors or have any other suggestions for improvement, then please tell us your name, the
name of the company who has licensed our products, the title and part number of the documentation and
the chapter, section, and page number (if available).
Note: Before sending us your comments, you might like to check that you have the latest version of the
document and if any concerns are already addressed. To do this, access the new Applications Release
Online Documentation CD available on My Oracle Support and www.oracle.com. It contains the most
current Documentation Library plus all documents revised or released recently.
Send your comments to us using the electronic mail address: [email protected]
Please give your name, address, electronic mail address, and telephone number (optional).
If you need assistance with Oracle software, then please contact your support representative or Oracle
Support Services.
If you require training or instruction in using Oracle software, then please contact your Oracle local office
and inquire about our Oracle University offerings. A list of Oracle offices is available on our Web site at
www.oracle.com.
v

Preface
Intended Audience
Welcome to Release 12.1 of the Oracle Applications User's Guide.
This guide assumes you have a working knowledge of the following:
• The principles and customary practices of your business area.
• Computer desktop application usage and terminology.
If you have never used Oracle Applications, we suggest you attend one or more of the
Oracle Applications training classes available through Oracle University.
See Related Information Sources on page viii for more Oracle Applications product
information.
Deaf/Hard of Hearing Access to Oracle Support Services

To reach Oracle Support Services, use a telecommunications relay service (TRS) to call
Oracle Support at 1.800.223.1711. An Oracle Support Services engineer will handle
technical issues and provide customer support according to the Oracle service request
process. Information about TRS is available at
http://www.fcc.gov/cgb/consumerfacts/trs.html, and a list of phone numbers is
available at http://www.fcc.gov/cgb/dro/trsphonebk.html.
Documentation Accessibility
Our goal is to make Oracle products, services, and supporting documentation accessible
to all users, including users that are disabled. To that end, our documentation includes
features that make information available to users of assistive technology. This
documentation is available in HTML format, and contains markup to facilitate access by
the disabled community. Accessibility standards will continue to evolve over time, and
vii
Oracle is actively engaged with other market-leading technology vendors to address
technical obstacles so that our documentation can be accessible to all of our customers.
For more information, visit the Oracle Accessibility Program Web site at
http://www.oracle.com/accessibility/.
Accessibility of Code Examples in Documentation

Screen readers may not always correctly read the code examples in this document. The
conventions for writing code require that closing braces should appear on an otherwise
empty line; however, some screen readers may not always read a line of text that
consists solely of a bracket or brace.
Accessibility of Links to External Web Sites in Documentation

This documentation may contain links to Web sites of other companies or organizations
that Oracle does not own or control. Oracle neither evaluates nor makes any
representations regarding the accessibility of these Web sites.
Structure
1 Getting Started with Oracle Applications
2 Forms-Based Applications
3 HTML-Based Applications
A Using Help
B Oracle Applications Accessibility Features
Related Information Sources

This book is included on the Oracle Applications Documentation Library, which is
supplied in the Release 12 Media Pack. You can download soft-copy documentation as
PDF files from the Oracle Technology Network at http://otn.oracle.com/documentation,
or you can purchase hard-copy documentation from the Oracle Store at
http://oraclestore.oracle.com. The Oracle Applications Release 12 Documentation
Library contains the latest information, including any documents that have changed
significantly between releases. If substantial changes to this book are necessary, a
revised version will be made available on the "virtual" documentation library on My
Oracle Support (formerly OracleMetaLink).
If this guide refers you to other Oracle Applications documentation, use only the latest
Release 12 versions of those guides.
Online Documentation
All Oracle Applications documentation is available online (HTML or PDF).
• Online Help - Online help patches (HTML) are available on My Oracle Support.
• PDF Documentation - See the Oracle Applications Documentation Library for
viii
current PDF documentation for your product with each release. The Oracle
Applications Documentation Library is also available on My Oracle Support and is
updated frequently.
• Oracle Electronic Technical Reference Manual - The Oracle Electronic Technical

Reference Manual (eTRM) contains database diagrams and a detailed description of
database tables, forms, reports, and programs for each Oracle Applications product.
This information helps you convert data from your existing applications and
integrate Oracle Applications data with non-Oracle applications, and write custom
reports for Oracle Applications products. The Oracle eTRM is available on My
Oracle Support
Related Guides
You should have the following related books on hand. Depending on the requirements
of your particular installation, you may also need additional manuals or guides.
Oracle Alert User's Guide
This guide explains how to define periodic and event alerts to monitor the status of
your Oracle Applications data.
Oracle Workflow User's Guide
This guide describes how users can view and respond to workflow notifications and
monitor the progress of their workflow processes.
Integration Repository
The Oracle Integration Repository is a compilation of information about the service
endpoints exposed by the Oracle E-Business Suite of applications. It provides a
complete catalog of Oracle E-Business Suite's business service interfaces. The tool lets
users easily discover and deploy the appropriate business service interface for
integration with any system, application, or business partner.
The Oracle Integration Repository is shipped as part of the E-Business Suite. As your
instance is patched, the repository is automatically updated with content appropriate
for the precise revisions of interfaces in your environment.
Do Not Use Database Tools to Modify Oracle Applications Data

Oracle STRONGLY RECOMMENDS that you never use SQL*Plus, Oracle Data
Browser, database triggers, or any other tool to modify Oracle Applications data unless
otherwise instructed.
Oracle provides powerful tools you can use to create, store, change, retrieve, and
maintain information in an Oracle database. But if you use Oracle tools such as
SQL*Plus to modify Oracle Applications data, you risk destroying the integrity of your
data and you lose the ability to audit changes to your data.
ix
Because Oracle Applications tables are interrelated, any change you make using an
Oracle Applications form can update many tables at once. But when you modify Oracle
Applications data using anything other than Oracle Applications, you may change a
row in one table without making corresponding changes in related tables. If your tables
get out of synchronization with each other, you risk retrieving erroneous information
and you risk unpredictable results throughout Oracle Applications.
When you use Oracle Applications to modify your data, Oracle Applications
automatically checks that your changes are valid. Oracle Applications also keeps track
of who changes information. If you enter information into database tables using
database tools, you may store invalid information. You also lose the ability to track who
has changed your information because SQL*Plus and other database tools do not keep a
record of changes.
x
1
Getting Started with Oracle Applications
Introduction
Oracle E-Business Suite is a complete set of business applications for managing and
automating processes across your enterprise. This guide describes the user interface
features that are common to Oracle E-Business Suite applications, including:
• List of Values (LOV), page 2-6
• Flexfields, page 2-8
• Search (Query) functions, page 2-9
• Folders, page 2-11
• Concurrent Requests, page 2-13
• Export, page 2-19
• Attachments, page 2-19
• User Profile Options, page 2-21
Getting Started with Oracle Applications 1-1

Getting Started
The E-Business Suite Home page is your entry point to Oracle E-Business Suite. From
this page you can:
1. View or respond to your most important notifications from the Worklist.
2. Access E-Business Suite functions from the Navigator.
3. Set Preferences.
4. Navigate to frequently-used functions or Web pages from Favorites.
Using Worklists
The Worklist displays your most important notifications. Select the Subject to respond,
or select Full List to see all of your notifications.
Access E-Business Suite Functions

Use the Navigator to access Oracle E-Business Suite functions grouped by
responsibility.
Note: A responsibility is a level of authority in Oracle E-Business Suite. It

enables your access to those functions and data appropriate for your
enterprise role. You can have one or more responsibilities.
To access a function
1-2 Oracle Applications User's Guide

1. Select a responsibility to view its menu of functions.
2. Select the function to launch it.
To add or delete functions shown in the Navigator from all functions available to you,
select Edit Navigator.
Two Types of Interfaces

Oracle E-Business Suite applications are either Forms-based or HTML-based.
Forms-based applications are optimized for processing a large volume of transactions.
HTML-based applications, sometimes referred to as "self-service applications", are
optimized for ease of first-time use. For example, to enter a batch of journals, the
E-Business Suite provides a Forms-based application. To submit an expense report, the
E-Business Suite provides an HTML-based application.
For Forms-based functions open the Oracle Applications Navigator. For more
information about the Navigator window, see Using Forms-Based Applications, page 2-
1.
For more information about HTML-based applications, see Using HTML-Based
Applications, page 3-1.
Set Preferences
Select Preferences to set personal options. Options include language, territory, time
zone, notification style, accessibility setting, and formats for dates and numbers. You
can also reset your password from the Preferences page.
Optionally specify a Start Page for all future sessions from available pages (organized
by responsibility).
Note: From the Forms interface, change your Start Page using the
"Applications Start Page" profile option.
Set additional preferences using user profile options. For more information, see
Defining Preferences with User Profile Options, page 2-21.
Navigate to Frequently-Used Functions

Customize your Favorites by adding links to frequently-used functions and Web sites.
To add or remove links, select Edit Favorites.
If adding a link to a Web site, you can specify whether to open the URL in a new
window.
Getting Started with Oracle Applications 1-3

2
Forms-Based Applications
Using Forms-Based Applications
The Navigator
From the Navigator you can:

• Open forms from the Functions tab.
• Link to documents from the Documents tab.
Forms-Based Applications 2-1

• Launch business processes from the Processes tab.
Open Forms
The Functions tab provides links to the forms accessible to your current responsibility.
To open a form, expand the function heading and double-click the form name.
Create a Top Ten List

Add forms that you use frequently to your Top Ten List. Create a different top ten list
for each of your responsibilities.
To add a form to the Top Ten List
• Select the form, then select the Add to List button.
To remove a form from the Top Ten List

• Select the form, then select the Remove from List button.
Create Links to Documents

Create links to documents that you are working on for faster access. The Documents tab
allows you to save as many links as you want. View the saved links as a list or as icons.
To add a document that is currently open
• Choose Place on Navigator from the File menu
Important: The Place on Navigator command is not enabled for all

forms.
To rename a link that you have created

1. Select its name (or icon) and select the Rename button.
2. Enter the new name in the Rename Label window and click OK.
To remove a document from the Documents tab

• Select its name (or icon) and select the Remove button.
Launch Business Processes

The Processes tab contains interactive step-by-step maps of business processes. Each
step is a form or report that you can launch directly from the process map.
Each time you launch a business process, you create an instance of that process and
assign it a name. As you complete each step in a process, the map is updated
accordingly.

To open a process
1. Select the process, then select the Launch button.
2. Enter a name for the new instance.

The instance remains active until you complete or cancel it. The Processes tab lists
your active instances.
Working in a Process Instance

The active step has a box drawn around it. More than one step can be active if your
process contains multiple paths.
• Click once on a step icon to display a description of the step.
• Double-click on a step icon to open the related form.
• Advance to the next step of a process from within a form by using the Next Step
toolbar icon.
The Forms Toolbar
The toolbar icons and the actions they perform are as follows:
1. The New icon opens a new record.
2. The Find... icon invokes the Find window.
3. The Show Navigator icon invokes the Navigator window.
4. The Save icon saves your data.
5. The Next Step icon advances you to the next step of a process. See Launch Business
Processes, page 2-2.
6. The Switch Responsibilities icon invokes the list of your responsibilities for you to
choose another.
7. The Print... icon prints the current screen. In some cases it may print a report
associated with the current data.

8. The Close Form icon closes all windows of the current form.
9. The Cut icon cuts the current selection to the clipboard.
10. The Copy icon copies the current selection to the clipboard.
11. The Paste icon pastes from the clipboard into the current field.
12. The Clear Record icon erases the current record from the form.
13. The Delete icon deletes the current record from the database.
14. The Edit Field... icon displays the Editor window for the current field.
15. The Zoom icon invokes customer-defined drill-down behavior.
16. The Translations... icon invokes the Translations window. See Creating
Translations for a Record, page 2-9.
17. The Attachments icon invokes the Attachments window. If attachments already
exist, the icon appears as a paperclip holding paper. See Attachments, page 2-19.
18. The Folder Tools icon invokes the Folder Tools palette window. See Customizing
the Presentation of Data, page 2-11.
19. The Window Help icon invokes online help for the current window.
Entering Data in Forms

Use the following form components to enter and query data:

1. Single-Row Block
2. Multi-Row Block
3. Folder Indicator
4. Current Record Indicator
5. Record
6. Field
7. List of Values Indicator
8. Descriptive Flexfield
9. Master-Detail Coordination Box.
Organization of a Form
Field
Use fields to enter, view, update, or delete information.
By default, a required field is displayed in yellow, and a read-only field is displayed in
gray. These colors can be changed or turned off using profile options. See Defining
Preferences with User Profile Options, page 2-21.

In some cases, the display size of a field is too small to show the entire field contents.
Use the Edit Field toolbar icon to view and update these fields.
Record
A record is a logical grouping of fields. A record is also referred to as a row or a
transaction, since one record corresponds either to a row in a database table or to a
transaction.
You must complete all required fields in a record before moving to the next record.
Tip: If you unintentionally enter a record and cannot advance your

cursor, clear the record. From the Edit menu, choose Clear, then Record
.
Block
A block displays a set of records either in a single-row format or a multi-row format.
Tip: To clear data at the block level: From the Edit menu, choose Clear,
then Block.
Creating and Deleting Records

To create a record
1. Choose New from the File menu, or use the New toolbar icon.
2. After entering data for your new record, choose Save or Save and Proceed from the
File menu to save the record to the database. Choosing Save and Proceed
automatically advances you to the next record.
To delete a record
1. Choose Delete from the Edit menu.
This action erases the current record from your screen, and returns your cursor to
the first field of the next record.
2. To delete the record from the database, choose Save or Save and Proceed from the
File menu.
Using a List of Values (LOV)

A field that has a predefined list of valid values displays an LOV icon. Select this icon to
view the valid field values.
If a list contains more than 100 values, you are prompted to enter a Find string to limit
the list.

To choose a value from a list
Select a value, or reduce the list using one of the following methods:
• Without placing your cursor in the Find field, type the initial character(s) of a value
to autoreduce the list to those items matching the characters entered. Use the
Backspace key to re-expand the list. If your entry reduces the list to a single value,
the list window closes and inserts the value into the field.
Note: Lists that require a Find string do not use the autoreduce
feature.
• In the list window, enter any group of characters in the Find field and select the
Find button.
Note: Use the wildcard character (%) to represent any number of

characters, and the underline (_) to represent a single character. Do
not enter a wildcard character by itself. This will match all records.
Power List
Power List enables you to enter a search string or partial value in an LOV field without
opening the list window.
To use Power List
Enter the initial characters of a value in the field and press the Tab key. Power List
completes the entry for you.
Your entry can include wildcard characters.
If more than one value matches the characters you specify, a list window opens
containing those values.
Advanced Data Entry Features
Master-Detail Relations
A Master-Detail relation is an association between two records. An example is the
relationship between the Batch and Journals records in Oracle General Ledger. Each
batch (master record) is associated with a set of journal entries (detail records).
Some master-detail blocks contain a coordination check box that allows you to choose
whether detail records are queried. Select the master-detail coordination check box to
automatically coordinate the update of records between the master and detail blocks. If
you deselect the check box, the detail data is not displayed until you move your cursor
into the detail block.

Drill-Down Indicators
Some records provide additional details in separate, drill-down windows.
A wide-width current record indicator designates that a record provides drill-down
information. Double-click the indicator to open the detail window.
Flexfields
A flexfield is a flexible data field that can be customized by your enterprise. Oracle
E-Business Suite uses two types of flexfields:
• Key flexfield - a field you customize to enter multi-segment values, such as part
numbers or account numbers.
• Descriptive flexfield - a field you customize to enter additional information not

provided by Oracle E-Business Suite.
Key Flexfields
A key flexfield is composed of segments, where each segment has both a value and a
meaning. For example, an Accounting Flexfield can be composed of segments that
represent Company, Department, and Account. The segments are delimited by a
segment separator (usually a "." or a "-").
A range flexfield is a type of key flexfield in which you can input a low and a high value
for each segment to express a range of combinations.
A key flexfield looks like any other field. You can enter the segments directly or use the
Flexfield window to enter each segment separately.
To enter data directly into a key flexfield
• Enter the segment values, separating each with the segment separator.
To enter data using the flexfield window

1. Select the List of Values icon to open the flexfield window, or select the Edit Field...
toolbar icon.
2. Enter a value for each segment, or use the list of values where available.
3. Select the Combinations button in the flexfield window to search the list of existing
segment combinations.
To enter data in a range flexfield

• Enter a Low and a High value for each segment, or use the list of values where
available.
Descriptive Flexfields
A descriptive flexfield appears as a two-character, unnamed field enclosed in brackets.
Move your cursor into the bracketed field to open the descriptive flexfield window. The

window contains segments that make up the descriptive flexfield. Each segment can
have a list of values.
To enter data in a descriptive flexfield
1. Open the descriptive flexfield window. If your profile option Flexfields:Open Descr
Window is set to "No", or if you are in a folder, select the Edit Field... toolbar icon to
open the flexfield window.
Note: For more information on profile options, see Defining

Preferences with Personal Profile Options, page 2-21.
2. Enter a value for each segment, or use the list of values where available. Default
values can be overwritten.
Creating Translations for a Record

Windows that allow the entry of records in multiple languages display the enabled
Translations... toolbar icon.
To enter a translation for a record
1. Select the record you wish to translate.
2. Select the Translations... icon from the toolbar.

The Translations window opens, with translatable fields displayed in columns. The
installed languages are displayed in rows.
3. Enter translations for the displayed fields.
Using Keyboard Help

Use keystroke combinations to perform many menu functions.
To view the list of functions and keystroke combinations
• Choose Keyboard Help... from the Help menu.
Searching for Data

To query records in your current block or window, use the Find command or Query by
Example.
The Find Command

The Find command displays a window in which you can specify search criteria.
Depending on the block that you invoke Find from, one of two types of windows
appears:

• A find window that contains fields for entering search criteria.
• A list window that shows all possible records that you can retrieve for the block.
Generally, a find window appears for a multi-record block, while a list window appears
for a single-record block.
Using the Find Command

• Choose Find... from the View menu or select the Find toolbar icon.
• If a list window appears:
• Use a list window as you would an LOV window. See Using a List of
Values (LOV), page 2-6.
• If a find window appears:

1. Enter as many search criteria as you can.
2. Select the Find button.
Query by Example
To retrieve a group of records based on more sophisticated search criteria than Find
allows, use Query by Example. Query by Example allows you to specify search criteria
in any of the queryable fields in the current block. The search criteria can include
specific values, phrases containing wildcard characters, or query operators.
If you do not need to retrieve the records, but only want to know how many records
match your search criteria, perform a query count.
Using Query by Example

1. From the View menu, choose Query by Example, then Enter.
This action switches your window from data entry mode to Enter Query mode.
Queryable fields are displayed in blue.
2. Enter search criteria in the queryable fields. (Fields may be case-sensitive). To reuse
criteria from your last search: From the View menu, choose Query by Example,
then Show Last Criteria.
Important: In Enter Query mode, all check boxes are initially in a

null state. To use a check box as a search criterion, you must
explicitly check or uncheck it.
3. To perform the search: From the View menu, choose Query by Example, then Run.

4. To exit Enter Query mode without searching: From the View menu, choose Query
by Example, then Cancel.
To perform a query count

1. Perform steps 1 and 2 from the previous task: "To use Query by Example".
2. From the View menu, choose Query by Example, then Count Matching Records.
The window's message line displays the number of matching records.
Query Operators
The following table shows the query operators for most fields, their meanings, and an
example expression:
Query Operators
Operator Meaning Example Expression
= equals = 'Janet', = 107
!= is not != 'Bob', != 109
> greater than > 99.1, > '01-JAN-04'
>= at least >= 55
< less than < 1000.00
<= at most <= 100
#BETWEEN between two values #BETWEEN 1 AND 1000
Customizing the Presentation of Data

Folder blocks allow you to personalize a form. You can define a query, customize the
layout of the form columns, and then save the query and layout in a folder definition
that can be retrieved later.
Folder blocks display an Open Folder button. When you move the cursor into a folder
block, you enable the Folder Tools toolbar icon and the Folder menu.
Important: If your system administrator sets the profile option Folders:

Allow Customization to "No", you cannot create or customize folders.

The only item available from the Folder menu is Open, to open a
predefined folder. For more information about profile options, see
Defining Preferences with User Profile Options, page 2-21.
Query Criteria for a Folder

To define query criteria for a folder
1. Run a query, either by using the Find command or Query By Example.
2. Save your query criteria by choosing Save As from the Folder menu.
3. Enter a name for the folder.
4. Select Always, Never, or Ask Each Time from the Autoquery option group to
define how frequently to perform the saved query.
5. Select the Open as Default check box to set this folder definition as the default
every time you navigate to this form.
6. Select the Public check box to allow other users to access your folder definition.
Selecting Public does not enable other users to modify your folder.
7. Select the Include Query check box to include your query in the folder definition. If
you do not select this check box, only the folder layout is saved.
To view the query criteria for a folder

• Choose View Query from the Folder menu.
The Folder Query window displays the query used to retrieve the records
displayed in the folder. An empty window indicates that the folder retrieves all
records.
To reset the query criteria for a folder

1. Choose Reset Query from the Folder menu.
This clears the query from the current folder, but retains the current folder name
and field layout.
2. Perform another query and choose Save from the Folder menu to save the new
query to your current folder.
Customizing the Layout of a Folder

Use the Folder menu or the Folder Tools window to customize the folder layout. Some
layout changes can be made using the mouse. For example:

• Change the width of a column by dragging the column's border.
• Change the sequence of a column by dragging the column's heading to a new

position.
• Change the name of a column by using the right mouse button on the column's
heading. A window prompts you for the new name.
To access the Folder Tools window

• Select the Folder Tools toolbar icon, or choose Folder Tools from the Folder menu.
Running Reports and Programs

A report or a concurrent program can be scheduled and submitted as a single request,
or you can schedule and submit multiple reports and programs together as a request
set.
Important: The navigation path you use to schedule and submit

requests varies by application. Some of the options mentioned may not
be available based on the selected request, your responsibility, or if you
are using HTML-based pages. Some functions automatically submit a
request when you choose a specific button or save your work.
Request Submission
1. Choose the Program Name from the list of available requests and then enter a
Request Name, which can be used later to search and monitor your request.
Use the Copy... option to choose and submit a request that you have previously
submitted from this responsibility.
2. Define parameters.
If a request requires parameter values, the Parameters window opens. Enter the
values in the required parameter fields.
Note: Your user profile option Flexfields:Open Descr Window must

be set to "Yes". See Defining Preferences with User Profile Options,
page 2-21.
3. Determine the output language.

If your site supports multiple languages, select the language for your request
output.
Choose the Language Settings... button to open the Languages window. If the

language selection is predefined in the report, the Language Settings... button is not
enabled.
In the Languages window select the Language, Territory, and Numeric Character
settings appropriate for your report.
Select the Select All button to produce output in all languages supported at your
site or to check individual languages.
Important: Each language creates its own request, so the number of

languages determines the number of requests created and tracked
in the Requests window.
4. Define a schedule.
Specify when you would like your request to run. You can choose a simple
schedule such as, as soon as possible, a specific date and time, or recurring intervals; or
you can choose a more advanced schedule such as specific days of the week or specific
dates in a month. You can also choose a previously saved schedule.
Note: If you do not select an end date for the more advanced
schedules, the request will continue to run until it is cancelled.
5. Define the layout.

• Template Name - If the request has multiple layout templates available, you
can select a different template to apply to the request.
If you selected multiple language outputs from the Languages window, a
separate template entry displays for each language. You can apply a different
template for each language.
• Template Language – This field defaults to the language selected for the
request. If the template is not available for a selected language, this field
defaults to the session language.
• Format – The output format selection varies by template. Some options are
PDF, RTF, and HTML.
• Preview - If sample data is available for the request, select the Preview button
to display the selected template with the sample data.
Note: Select the Options... button to change the default layout.

notification, and output options.
6. Notify employees.

Choose the employee name from the list of available employees, and then choose
the circumstance of when to notify this employee. This option sends an E-mail
notification, with a link to the request, based on if the request ran normally or
resulted in a warning or error.
7. Print the output to:

For printed output, select the print style, printer, copies, and language.
To view your output online or to save your output to a file, select the Save all
Output Files check box.
Note: Some requests have a required Style, Printer, or Language

value that you cannot change.
8. Review your choices, make any necessary changes, and submit your request.
Multiple Organizations Reporting

Multiple organizations reporting improves reporting capabilities of Oracle Applications
by allowing reporting across operating units.
An operating unit is an organization that uses Oracle Cash Management, Order
Management and Shipping Execution, Oracle Payables, Oracle Purchasing, and Oracle
Receivables. An operating unit is associated with a legal entity and may be a sales office,
a division, or a department. Information is secured by operating unit for these
applications, and you see information only for your operating unit.
When multiple organizations reporting is active, a list of available operating units is
enabled when you enter the Program Name. Choose the operating unit to run your
report against and continue submitting your request.
Request Sets
1. Choose the Request Set Name from the list of available request sets.
Use the Copy... option to choose and submit a request set that you have previously
submitted from this responsibility.
2. Define the parameters, layout, notification, and printer output information for each
report or program listed in the request set.
3. Define the schedule.

Specify when you would like this request set to run. See Request Submission, page
2-13.
4. Review your choices, make any necessary changes, and submit your request set.

Note: Each report or program contained in the request set is
assigned its own ID so that its status can be monitored individually
on the Requests page.
Monitoring Requests
The Requests window allows you to:
• View the status of your submitted requests.
• Change processing options.
• Diagnose errors.
• View your request output.
Important: You can view only those requests to which you have been
granted access by an administrator.
Request Phase and Status

A request has a life cycle consisting of the following phases: pending, running, and
completed. If a request is on hold or unable to run, the request is placed in an inactive
phase.
During each phase, a request has a specific status. Listed below are the possible statuses
for each phase:
• Pending Phase - Normal, Standby, Scheduled, Waiting
• Running Phase - Normal, Paused, Resuming, Terminating
• Completed Phase - Normal, Error, Warning, Cancelled, Terminated
• Inactive Phase - Disabled, On Hold, No Manager
For more information about the status of your request, select the Diagnostics button in
the Requests window.
Finding Requests
1. Open the Requests window (navigation varies by application).
When you open the Requests window, you are directed to the Find Requests
window.

2. Define your search criteria.
Note: You can use the Specific Requests region to view a list of
requests that you did not submit by entering a requestor other than
yourself. However, you can only view details, output, and log files
for requests submitted by you or your responsibility.
3. Select Find.
Options for Requests in Progress

Hold or cancel pending requests from the Requests window using the Hold Request or
Cancel Request buttons.
View request diagnostics by selecting the Diagnostics button. The Request Diagnostics
window displays information about the request run. The window may contain a View
XML button to display the generated XML data, if applicable.
You can change completion and scheduling options for requests that meet the following
criteria:
• You made the initial request.
• The request has not yet run.
• The program does not prevent request updates.
To Change Options for a Request in Progress

1. Select the request from the list.
2. Select the View Details... button to launch the Request Detail window.
• To update a request's schedule, select the Schedule... button.
• To update a request's completion options, select the Options... button from the
Upon Completion... region.
Viewing Request Output

Reports are displayed in a browser, in the Report Viewer, or in another application
registered by your system administrator. Reports that produce an output other than a
text file, such as HTML or PDF, are displayed in a browser.
Set the profile option Viewer: Text to "Browser" to display your text files in a browser. If
your system administrator registered other applications for viewing reports, select your
text viewer application using the profile option Viewer: Application for Text. If this profile
option is not set, you get a choice of applications when you view the report.

For more information about these profile options, see Defining Preferences with User
Profile Options, page 2-21.
To View Request Output
1. Navigate to the Requests window.
2. Select the completed request and select the View Output button.
Tip: To view request log files: Select the View Log button.
To save request output displayed in the Report Viewer

1. Choose Copy File... from the Tools menu to display the Viewer Option window.
2. Select an output file format. This action opens your browser window.
3. From the browser window, use your browser's tools to save your request output to
a file.
Republishing or Reprinting Requests

Requests with multiple layout templates can be republished using a different template.
If multiple templates are not available, reprint is the only option.
1. Select the request and choose the Republish button or choose Republish... from the
Tools menu.
2. In the Republish and Reprint Request window, choose one of the following:
Republish & Print - Allows you to select a new layout template, language, and
output format for the data already generated by your request, and print the output.
Republish & View - Allows you to select a new layout template, language, and
output format for the data already generated by your request and simply view the
output online.
Reprint existing output - Reprints the request.
3. Choose the Layout and Printer options as appropriate for your selection.
Saving Reports from Your Browser

You can use the Save As functionality of your browser to save an HTML report to your
desktop. Ask your system administrator for assistance if your browser does not display
your language's character set clearly.

Exporting Records to a File
Use the export feature to save the records in a multi-row block to a tab-delimited file.
Open the file in the application of your choice.
To start an export
1. Query the records you want to export.
2. Place your cursor in the multi-row block that contains the records to be exported.
3. Choose Export... from the File menu.
Exporting Large Numbers of Records

Export, by default, selects all the records retrieved by the query. If the number of
records exceeds 100, you are prompted to:
Stop - Limit the export to those records you have explicitly selected. Alternatively,
cancel the export.
Continue to End - Export all records retrieved by the query.
Important: Avoid exporting a very large number of records as system

performance can be affected.
Continue - Select the next 100 records for export. You are prompted every 100 records
until all records are selected, or you choose Stop or Continue to End.
Attachments
Use the Attachments feature to link text or other files to a record.
The Attachments... toolbar icon is enabled when the attachments feature is available. If
the current record already has an attachment, the icon appears to hold a piece of paper.
To open the Attachments window
• Click the toolbar icon or choose Attachments... from the View menu.
To add a new attachment

1. Select a Category from the list of values. The Category defines the purpose of an
attachment and controls which forms or pages can access it.
2. Select the attachment Data Type from the list of values:

• Text - Enter text that is less than 2000 characters. If the text you want to attach is

more than 2000 characters, upload it in a file.
• File - Launch the Upload a File window in your browser. Select the Browse
button to locate the file in your file system or enter the file location in the File
field.
• Web Page - Your cursor advances to the URL field on the Source tab of the
window. Enter the URL for the Web page.
3. Optionally add a title for your document.
4. Select the May Be Changed check box to allow changes to the attachment.
To attach a document from the Document Catalog

1. Choose the Document Catalog... button to open the Document Catalog window.
2. Use the Find Existing Documents region to query existing documents. Matching
documents are returned in the Documents region.
Note: To copy an attachment from another record, use the Attached

To: field to select the application object you want to copy
attachments from.
3. To view a document before attaching it, select it and then choose the Preview
button.
4. Select the document(s) to attach.
5. Choose the Attach (n) button, where n is the number of documents selected.
To view an attached document

In the Attachments window, select the attachment you want to view. If the attachment
does not automatically display in the document block, select the Open Document
button to view the document in a browser.
To delete a record's attachment
When you delete an attachment, you can remove the association between the record
and the attached document or remove the attached document from the file system or
database.
1. In the Attachments window, select the document to delete.
2. Choose Delete from the Edit menu.
3. Select a button in the Decision window to remove either the Document and

Attachment or just the Attachment.
Defining Preferences with User Profile Options

Use profile options to modify the way your applications run.
Oracle E-Business Suite supports a set of user profile options that are common to all
applications. In addition, each application has its own set of user profile options. See
your application's documentation for information on application-specific profile
options.
Profile Hierarchy
Profile options can be set at four levels:
• Site - affects all applications installed at a site.
• Application - affects a specific application.
• Responsibility - affects the applications assigned to a specific responsibility.
• User - affects the applications run by a specific user.
A User-level setting overrides a Responsibility-level setting, which overrides an

Application-level setting, which overrides a Site-level setting.
Your system administrator sets options at all four levels. You can change options only
at the User level.
Setting Profile Options

Use the Profile Values window to display and change your user profile options.
Note: There are some profile options that you can view but not change.
For example, you can view the value for Concurrent:Request Priority,
which is set at the User level, but only your system administrator can
change its value.
If you do not set a user profile option, it assumes a default value set either by your
system or your system administrator.
To set a profile option
1. Navigate to the Profile Values window (navigation varies by application.)
• To view a specific profile, use Find or Query by Example.
The Profile Values window displays the Profile Name, Default Value, and
User Value.

2. Enter a value in the User Value field or choose a value from the list of values, if
available. To accept the default setting, clear the User Value field.
Important: Number and date values are not validated. Ensure that
you enter a valid number or date, or the associated profile option
may not work as you expect.
3. Choose Save from the File menu or select the Save toolbar icon.
Note: Some profile option changes do not take effect until you
change responsibilities or restart your session.
Common Profile Options
Flexfields:Open Descr Window

Controls whether a descriptive flexfield window automatically opens when you
navigate to it. Valid values are Yes or No.
FND: Indicator Colors

Valid values are Yes (default), No, or null. When this profile option is set to Yes:
• Required fields are displayed in yellow.
• Queryable fields are displayed in a different color while in enter-query mode.
• Read-only fields are rendered in dark gray.
Folders:Allow Customization
Determines whether you can personalize folders. Valid values are:
• Yes - you can create or customize folder definitions.
• No - you can open only existing folder definitions.
Note: Only the system administrator can update this profile option.
Indicate Attachments
Turns off the indication of attachments when querying records (for performance).
Note: Only the system administrator can update this option.

Printer
Use this option to define your printer.
Sign-On:Notification
Valid values are Yes and No. Yes displays a message at login that indicates:
• If any concurrent requests failed since your last session.
• How many times an incorrect password was used with your username since you
last logged on.
• If the default printer identified in your user profile is unregistered or not specified.
Viewer: Application for Text

If your system administrator has registered other applications for viewing text output,
select the application from the list of values. The profile option Viewer: Text must be set
to Browser to use this profile option.
Viewer: Text
Sets the display viewer for text report output. Valid values are Browser and Report
Viewer.

3
HTML-Based Applications
Using HTML-Based Applications

HTML-based applications use the following common components:
1. Process Train
2. Date Picker
3. Global Links
4. List of Values Icon
HTML-Based Applications 3-1

Navigating
Navigate to functions in an HTML-based application using tabs, subtabs, and side
navigation elements. As you drill down through these elements, locator links display
your navigation path.
When you navigate through records in a table, use the Previous and Next links. When
you navigate through steps of a task, use the Back and Next buttons.
Important: Use these forward and backward navigation elements

provided by the application. Do not use your browser's buttons.
Process Train
If you are executing a process, a process train shows the location of the current page in
the process. Some process trains are interactive. These allow you to jump one or more
steps backward in the process by selecting the step icon.
Locator Links
Locator links (sometimes called "breadcrumbs") are series of links and text that show
your navigation path through an application. Use the links to return to a previous point
in your navigation path.
Using Oracle E-Business Suite Secure Enterprise Search

By leveraging Oracle Secure Enterprise Search (SES), Oracle E-Business Suite Secure
Enterprise Search provides a centralized search capability allowing you to use text
search on applications content without compromising on the security and context
sensitive information.
Through a secure text search, not only can you enjoy the immediate search results with
accuracy, but you can also easily refine the search by narrowing down the results or
tracing back to original results in an efficient way.
Note: Oracle E-Business Suite Secure Enterprise Search does not replace
all the Search pages, instead it is deployed where it makes the most
sense in searching for applications content. See Querying and Viewing
Data, page 3-6 for other search pages.
For more information on administering Oracle E-Business Suite Secure
Enterprise Search, see the Oracle Applications System Administrator's
Guide - Maintenance.

From the Oracle E-Business Suite Secure Enterprise Search region embedded in your
application, you can:
1. Perform a search in the Search region.
2. View your search results in classic or tabular format.
3. Narrow down your search results using the Narrow By region.
4. Roll back to your previous search results using the Expand By region.
5. Enter filters in the Filter region to narrow down the search results on a searchable
object only.
Using the Search Region

The Search region appears on top of the Oracle E-Business Suite Home page or your
product home page.
To perform a search using the Search region
1. Select a searchable business category from the LOV.
To secure the application data to only those who have the access privileges, Oracle
E-Business Suite Secure Enterprise Search only displays the searchable categories in
the LOV that you have been authorized for access.
If you are authorized to access 'Customer Relation' business category, you should

find 'Customer Relation' from the LOV.
Note: If "All" business category is selected, then you will not find
search results for objects that require security based on full security
context privileges such as "Vacancies" object in iRecruitment. This
is because "All" category search is designed to give results for
objects with normal security (or not based on full security context)
only. Instead, you will need to search on the group (such as
"Vacancies") or narrow down to the object to get results if you have
the access privileges.
2. Enter a keyword search or enter partial values containing wildcard characters

(regular expressions wildcard '*', not '%') on the selected category and click Go.
Note: Because date based columns are precrawled and indexed in

the form of YYYY-MM-SS, if you want to base search on a date
value, use the same format 'YYYY-MM-SS' as the query string. For
example, use '2007-04-25' to search for records dated on
25-Apr-2007.
The search result is displayed in the Results region. The search text entered here is
also recorded in the Expand By region. See: Tracing Back the Results Using Expand
By, page 3-6.
If the 'Customer Relation' business category contains Contracts and Customer
Account business objects, after executing a search on 'Customer Relation' category,
you will find these two business objects displayed in a tree structure in the Narrow
By region. See: Narrowing Down the Search Results Using Narrow By, page 3-5.
Viewing the Search Results

Oracle E-Business Suite Secure Enterprise Search displays various search-related details
including the last crawled time for your selected search object or group, current page
number and results displayed, total number of estimated hits, time taken by search
engine in performing the search, and search result records.
Note: The total number of estimated hits is just a rough estimate. To

have a more accurate estimate, Oracle SES allows administrators to set
a parameter in global setting to report an exact count of search results.
However, this option impacts query response time. See Oracle Secure
Enterprise Search Administrator's Guide for details.
The result records can be displayed in the classic, title-description style if the search is
on a searchable category. If it is on a searchable object selected in the Narrow By region,
you can change the display from the default classic style to tabular format.

Click the record name link from the result page to drill down the record details. For
example, click on a job title 'Accounting Manager' to view the Accounting Manager job
details.
If the result is displayed in the classic format, you might find the following links
available (if these attributes are identified and associated with the object you search on):
• Actionable Links: This lets you visit external URLs.
• Related Search: If a relation exists between the object searched on and other objects.
This lets you perform a search on related object.
The related search content is secured by authorization. Only users with appropriate
access privileges can execute search on the related objects. Otherwise, an
unauthorized access message appears indicating that you do not have the access
privileges.
For example, 'Customer Invoices' might be displayed as a related object while
searching for 'Customer Relation'. Clicking on the 'Customer Invoices' object link
will execute another search on the related object only if you have the access
privileges. Otherwise, an unauthorized access message appears.
Note: For better query time performance, the search result will
display related objects along with other search hits even though
you do not have the access privileges to some of the objects.
Narrowing Down the Search Results Using Narrow By

Use the Narrow By region to narrow down the search results by selecting the following
search components from a tree:
• Searchable Group
A business category is comprised of searchable groups and objects. A searchable
group is preceded with the "check" icon when displayed in the tree. By selecting a
searchable group link from the tree, all other searchable groups or objects contained
in the selected group are displayed as a child node. If you select a searchable group
from the child node, the selected group becomes a parent node in the tree, and the
selected group name is added to the Expand By region allowing you to trace back
the original search result. If a selected child node is a searchable object, then this
object becomes a parent node and all the fields underneath become a child node.
Note that if a search is on a searchable group, the result is displayed in classic
format only, and the Result Style field is not visible.
• Searchable Object
A searchable object node is preceded with the "object" icon in the tree. When
refining your search on a searchable object, the selected object name becomes a

parent node in the tree, and all the fields underneath become a child node. These
field-based child nodes allow you to further narrow down the search results by
applying filters. See: Using Filters on Searchable Objects, page 3-6.
Tracing Back the Results Using Expand By

Use the Expand By region to roll back to the original search result after you modify the
search in the Narrow By region. The Expand By region displays all the search criteria
you used for a search including the text entered in the Search region, group names,
object names, or any filters. Clicking on any links in the Expand By region will bring the
result back to the point from where you came. For example, clicking on the 'Oracle'
filter link removes the filter from a search and expands the search result without being
restricted by the filter, 'Oracle'.
Using Filters on Searchable Objects

Use the Filter region to narrow down your search on a selected object. When you select
a searchable object in the Narrow By region, the Filter region appears allowing you to
apply filters on the selected object. By entering filter text and clicking Search With
Filter, a search with filter criteria is executed.
Note: To search on an exact phrase through filters, use quotation marks

(") around the phrase. For example, enter "contract imported" as the
filter text to find the exact phrase from the search result. Without the
quotation marks, you will find either 'contract' or 'imported' from the
result.
Please note that filters do not consider words "to", "the" and "other". If
any of those words are entered as filter text, you will find that search
results not containing above values are also displayed. This is because
those words are considered as stopwords in Oracle SES. Hence, they
are removed from queries.
See: Narrowing Down the Search Results Using Narrow By, page 3-5.
Querying and Viewing Data

Pages that allow you to search for data display a Search panel that generally includes a
search region and a results region. Many search panels contain an Advanced Search
button that allows more detailed searches using additional criteria.
When you enter characters in a search field, a wildcard is implicitly added to the end of
the string.
The results region displays search results in a table. Columns that are sortable have a
highlighted heading. The currently-sorted column displays an arrow icon to indicate

whether the sort is ascending or descending.
Click the column heading of a sortable column to sort by that column. Click it again to
toggle between ascending and descending order.
Many pages allow you to save searches and personalize the display tables. See
Personalizations, page 3-11.
Using a Hierarchical Grid (HGrid)
1. Locator links define the position of the displayed grid in the navigation hierarchy.
2. Use the Hide/Show icon to expand and collapse the branches of the tree.
3. Use the Focus icon to display only a specific branch in the tree.
Entering Data
Entering Data in a List of Values (LOV) Field

If you know the value for a field, enter it and press the Tab key. If you do not know the
value, choose the List of Values icon to launch the Search and Select page. Enter a
partial value before launching the Search and Select page to limit the results. If the
partial value matches only a single value, the field autofills and the Search and Select
page does not launch.
Some Search and Select pages support alternate search criteria. Use the Search by
pulldown list to select a different search field. Enter the search string and select the Go
button. Select the value from the Results region and choose the Select button.
LOV Choice List

When a field has a long list of possible values from which a small subset is commonly
used, you may see an LOV choice list. The LOV choice list displays the most
commonly-used values for easier selection and includes a More... option. Choosing

More... launches the LOV Search and Select page.
When you choose a value that is not in the LOV choice list, it is added to the list.
Personalizing an LOV Choice List

An LOV choice list may allow you to customize the list with the values that you use
most frequently.
To personalize an LOV choice list
1. Select the Personalize button next to the LOV choice list to open the Personalize
page.
2. To add a value, select it and choose the Add button.
3. To delete a value, select the icon in the Delete column.
Note: Some values cannot be deleted.
4. To reorder the list, select the Reorder button. In the Reorder page, select a value
you want to move and use the Move icons to position it in the list. When finished,
select the Apply button.
Entering Dates
Enter a date directly in a field using the format defined in your Preferences.
Alternatively, select the calendar icon to launch the Date Picker pop-up window. When
you select a date, the window closes and inserts the date into the field.
Using Hot Keys

The following hot keys are supported in HTML-based applications. To perform the
action, press the Alt key + the key listed in the table:
Action Key
Apply p
Back k
Cancel l
Continue c

Action Key
Finish i
Next x
No n
Save s
Search r
Submit m
Yes y
Right Subtab >
Left Subtab <
Scheduling Requests and Request Sets

For information on how to schedule a request or request set, see Running Reports and
Programs, page 2-13.
Monitoring Requests
The Monitor Requests pages provide a summary of requests and details of each
request.
Select the Search button to specify your search criteria.
Related Topics
Monitoring Requests in Forms-Based Applications, page 2-16
Using Attachments
Use the Attachments feature to link text or other files to a record.
If the Attachments feature is available the page will display either the Attachment List
link or the Attachments icon.

The method to initiate an Attachments flow will vary, depending on how the feature is
implemented on your page.
To add a new attachment
1. Display the Add Attachments page.
2. Using the Add poplist, select how you want to add the attachment:
From a Desktop File/Text/URL
1. Select a Category from the list of values. The Category defines the purpose of
an attachment, and controls which forms or pages can access it.
2. Select the attachment Type:

• File - specify a file name to upload. Enter the file location, or use the
Browse button to locate the file.
• URL - enter the URL for a Web page.
• Text - Enter text that is less than 2000 characters. If the text you want to
attach is more than 2000 characters, upload it in a file.
From the Document Catalog

1. Use the Search regions to query existing documents.
2. Select the Document Name link to view a document before attaching it.
3. Select the document(s) to attach.
4. Select the Apply button.
Save your work in the application page from which you launched the attachments flow.
The attachments are not added until you save your work in the parent region.
To view an attached document
In the Attachments page or Attachments table, select the File Name link.
• If the attachment is a URL, the Web page will launch.
• If the attachment is a file, a dialog box prompts you to open or save the file.
• If the attachment is text, the View Attachment page displays the text content.
To edit an attachment
1. Display the Attachments page or Attachments table.
2. Select the Update icon.

3. In the Update Attachment page, edit only the information as it pertains to the
attachment. For example, you can update the URL for a Web page attachment, but
you cannot change it to a File attachment.
5. Return to the application page from which you launched the attachments flow and
save your work.
Tip: Attachment updates must be saved in the associated parent

region.
To delete a record's attachment

In the Attachments page or Attachments table, select the Delete icon.
Personalizations
Some tables allow you to save queries and personalize the presentation of data. If a
table can be personalized, you see the Views panel or the Save Search button.
Note: Pages can have predefined personalizations available from the

View list. Some pages with no personalizations saved do not show the
Views panel until a search has been saved.
Personalizing Tables
To create a personalized view
1. Use the search panel to query for results in the table.
2. Select the Save Search button or the Views button.

• The Save Search button launches the Create View page.
• The Views button displays the Views panel. Select the Personalize button to
launch the Personalize Views page. This page displays existing views. Select the
Create View button to launch the Create View page.
3. On the Create View page, enter a View Name.
4. Specify the number of rows to display in the table.
5. Choose the Set as Default check box to make this view the default when you
navigate to this page.

6. Personalize other available options.
Note: Personalizable options vary by table. Some tables allow you

only to save the search criteria. Others allow you to change more
options, such as columns displayed, column order, sort order, and
headings.
To duplicate, update, or delete a personalized view

1. Select the Personalize button to launch the Personalize Views page.
2. Select the view from the list.

• Select Update to update the options for this view.
• Select Delete to delete the view.
• Select the Duplicate button to create a duplicate of the selected view. Enter a
new View Name. Make other modifications as desired and select Apply.

A
Using Help
Getting Help
To get help
1. Choose Window Help from the Help menu, click the Help button on the toolbar, or
press Ctrl+h to display help for the current window:
2. Navigate to the Contents tab to display online help for any of the Oracle
Applications products.
Note: You can also choose Oracle Applications Library from the Help
menu.
1. Click on a product name to display the list of top-level topics in that product's
online documentation.
2. Click on a topic of interest.
3. Navigate to the Search tab to find specific Oracle Applications information. Simply
enter your search criteria in the text field and then press Go. For more search
options click on the Advanced Search link.
For more information see Searching For Help, page A-1.
Searching For Help

You can perform a search to find the Oracle Applications help information you want.
1. Choose Window Help from the Help menu or click the Help button on the toolbar.
2. Navigate to the Search tab, enter your search criteria in the text field, then press Go
Using Help A-1

to perform a simple search. For more search options click on the Advanced Search
link.
A list of titles, ranked by relevance and linked to the documents, is returned from
your search.
3. Click on whichever title seems to best answer your needs to display the complete
document.
Tip: If the selected document doesn't fully answer your questions,

use the browser's back button to return to the list of titles and try
another.
Simple Search
Simple search implies that the search should return documents that contain any
expression entered in the search field.
The following table lists examples:
Use This Syntax To Find Documents Containing ...
concurrent managers the word "concurrent" or the word "managers"
"concurrent managers" the phrase "concurrent managers"
Advanced Search
The advanced search feature contains these options:
• All Words
• Any Words
• Boolean
All Words
The All Words option implies that the search should return documents that contain ALL
of the expression entered in the search field. For example, if you enter the expression
system administration, the system finds documents containing both "system" and
"administration".
A-2 Oracle Applications User's Guide

Any Words
The Any Words option implies that the search should return documents that contain
ANY of the expression entered in the search field. For example, if you enter the
expression system administration, the system finds documents containing either "system"
or "administration".
Boolean
The Boolean option implies that the search should return documents based on the truth
value of the expression entered in the search field. The values for the valid operators
that you can use are shown in the following table:
Operator Valid Values
And AND, and, &, +
Or OR, or, |
Not NOT, not, -, ~
The following table lists examples:
Use This Syntax To Find Documents Containing ...
"concurrent manager" & "profile options" the phrases "concurrent manager" and
"profile options"
"menu options" - "profile options" the phrase "menu options" and not the phrase
"profile options"
menu & menuitem the words "menu" and "menuitem".
profile | options the word "profile" or the word "options"
((profile & categories) ~ options) the words "profile" and "categories" and not
the word "options"
("concurrent manager" & (request submission)) the phrase "concurrent manager" and the
words "request" and "submission"
Using Help A-3

B
Oracle Applications Accessibility Features
Oracle Applications Accessibility Features
The Look and Feel of the User Interface

The Oracle Applications Professional User Interface can be run with either the Oracle
Look and Feel or the Generic Look and Feel. The Oracle Look and Feel consists of a new look
and feel for each item and a predefined set of color schemes. The Generic Look and Feel
adheres to the native interface and color scheme of the current operating system. The
choice of look and feel has an impact on accessibility features. In general, the Oracle Look
and Feel is the more accessible of the modes. Only low-vision users should find it
necessary to use the Generic Look and Feel.
To specify look and feel, set the profile option Java Look and Feel to either generic or
oracle. If the Oracle Look and Feel is used, the profile option Java Color Scheme can be
specified as follows: blue, khaki, olive, purple, red, swan (default), teal, or titanium.
Note: The Java Color Scheme profile option has no effect if Java Look
and Feel is set to generic.
Important: Setting the Java Color Scheme profile option to a value

other than swan can increase system response time.
Techniques for Low-Vision Users

Low-vision users may find it necessary to control the overall colors of the application,
either to increase or decrease the contrast. They can set the desired colors using the
operating system's provided schemes, then specify generic in the Java Look and Feel
profile option so that Oracle Applications will use these colors.
Oracle Applications by default renders required fields in yellow, queryable fields in a
Oracle Applications Accessibility Features B-1

different color while in enter-query mode, and fields that cannot be updated (read-only
fields) in gray. To turn off these features when running Oracle Applications
Professional User Interface, set profile FND: Indicator Colors to No.
Navigating the Interface

Oracle Applications offers a feature that can render the current screen in a compressed,
text-only fashion. By invoking the KEY-F9 function, all of the prompts and values of
items in the current window, (just the current row for multi-row blocks), are displayed
within a popup window in a text-only format. Each row can be spoken by a screen
reader. Included in this list are the values of display items or disabled items that
otherwise would not be easily discernible with a screen reader because they are not
keyboard-navigable.
Similarly, the KEY-F8 function shows a list of all buttons within the window and their
access keys, which otherwise would not be obtainable if they were not navigable.
Note: The KEY-F8 and KEY-F9 functions may not be mapped to the
corresponding function keys in your system. Use the Keys window
(Help > Keyboard Help... or Ctrl+k) to view the current mappings for
your system.
Techniques for Physically Disabled Users

Tabs in Oracle Applications can be switched from the keyboard by using the List Tab
Pages function (typically F2).
Oracle Applications includes a feature that renders an iconic button next to each field
that has an LOV. The LOV can also be invoked from the keyboard by pressing the List
of Values access key (typically Ctrl+l).
The Keys window displays the keystrokes to achieve normal Applications operations,
such as Next Block and Clear Record. This window can be viewed any time by pressing
Ctrl+k.
Oracle Applications provides the profile option Forms Keyboard Mapping File to
allow a customized keyboard mapping file to be used through the Professional User
Interface. The keyboard mappings can be customized as follows:
1. Locate the Oracle Forms resource file on the middle tier, typically called
fmrweb.res.
Note: This step is typically performed by a System Administrator.
2. Copy the file, rename it as appropriate, and locate it in the same directory as the
original.
B-2 Oracle Applications User's Guide

3. Open the new file in any text editor and make the desired keystroke mapping
changes.
Tip: Comments at the top of the file explain how the mappings are
performed.
4. To run this new mapping file, specify the complete path in addition to the filename
in the profile Forms Keyboard Mapping File.
The Self Service Accessibility Features profile option determines the level of
accessibility support in HTML-based applications.
Oracle Applications Accessibility Features B-3

Oracle® Applications: User's Guide Release 12.1

Uploaded by

Copyright:

Available Formats

Oracle® Applications: User's Guide Release 12.1

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Oracle® Applications: User's Guide Release 12.1

Uploaded by

Copyright:

Available Formats

Oracle® Applications

Part No. E12896-02

Contributing Author: Anne Carlson

U.S. GOVERNMENT RIGHTS

Send Us Your Comments

1 Getting Started with Oracle Applications

B Oracle Applications Accessibility Features

Oracle Applications User's Guide, Release 12.1

• Computer desktop application usage and terminology.

Deaf/Hard of Hearing Access to Oracle Support Services

Accessibility of Code Examples in Documentation

Accessibility of Links to External Web Sites in Documentation

Related Information Sources

• PDF Documentation - See the Oracle Applications Documentation Library for

• Oracle Electronic Technical Reference Manual - The Oracle Electronic Technical

Do Not Use Database Tools to Modify Oracle Applications Data

• Flexfields, page 2-8

• Search (Query) functions, page 2-9

• Folders, page 2-11

• Concurrent Requests, page 2-13

• Export, page 2-19

• Attachments, page 2-19

• User Profile Options, page 2-21

Getting Started with Oracle Applications 1-1

2. Access E-Business Suite functions from the Navigator.

4. Navigate to frequently-used functions or Web pages from Favorites.

Access E-Business Suite Functions

Note: A responsibility is a level of authority in Oracle E-Business Suite. It

1-2 Oracle Applications User's Guide

2. Select the function to launch it.

Two Types of Interfaces

Navigate to Frequently-Used Functions

Getting Started with Oracle Applications 1-3

Using Forms-Based Applications

From the Navigator you can:

• Link to documents from the Documents tab.

Forms-Based Applications 2-1

Create a Top Ten List

To remove a form from the Top Ten List

Create Links to Documents

Important: The Place on Navigator command is not enabled for all

To rename a link that you have created

To remove a document from the Documents tab

Launch Business Processes

2-2 Oracle Applications User's Guide

2. Enter a name for the new instance.

Working in a Process Instance

• Double-click on a step icon to open the related form.

The Forms Toolbar

2. The Find... icon invokes the Find window.

3. The Show Navigator icon invokes the Navigator window.

4. The Save icon saves your data.

Forms-Based Applications 2-3

9. The Cut icon cuts the current selection to the clipboard.

15. The Zoom icon invokes customer-defined drill-down behavior.

Entering Data in Forms

2-4 Oracle Applications User's Guide

4. Current Record Indicator

7. List of Values Indicator