Hexagon Head Bolts/Screws: Metric Series-Dimensions

Download as pdf or txt
Download as pdf or txt
You are on page 1of 7

STALWART TECHNOSOURCE

Hexagon Head Bolts/Screws INDIA PVT LTD.

Metric Series-Dimensions
Note:

1. The bolts and screws will generally conform to IS: 1364, ISO 4014, ISO 4017 and DIN 931/933.

2. Threads will conform to class 6g of IS: 4218, Coarse Series.


3. Material: Stalwart Technosource India Pvt Ltd. High grade carbon/alloy steel.
4. Heat Treatment: Property Class 10.9 or 8.8 of IS: 1367.
5. Thread Length LT:
LT1 for L < 125 LT2
for L > 125 to 200
LT3 for L > 200
6. Screw lengths equal to or shorter than those listed in row 'LET'
will be threaded to head.
7. Sizes in brackets are non-preferred standards.
8. All dimensions are in millimeters.

1
STALWART TECHNOSOURCE
INDIA PVT LTD.
Thread Pitch W C B H R Q Length of Thread Length
Size Max Min. Max Nom. Min. Min. Range
LT1 LT2 LT3 LFT L

M4 0.7 7.0 7.66 4.0 2.8 0.2 5.9 14 - - 20 10-40

M5 0.8 8.0 8.79 5.0 3.5 0.2 6.9 16 - - 20 10-50

M6 1.0 10.0 11.05 6.0 4.0 0.25 8.9 18 - - 25 10-50

M8 1.25 13.0 14.38 8.0 5.3 0.4 11.6 22 28 - 30 12-90

M10 1.5 16.0 17.80 10.0 6.4 0.4 15.6 26 32 45 35 16-90

M12 1.75 18.0 20.3 12.0 7.5 0.6 17.4 30 36 49 40 20-280

(M14) 2.0 21.0 23.45 14.0 8.8 0.6 20.5 34 40 53 45 25-200

M16 2.0 24.0 26.75 16.0 10.0 0.6 22.5 38 44 57 50 25-280

(M18) 2.5 27.0 30.14 18.0 11.5 0.6 25.3 42 48 61 60 40-200

M20 2.5 30.0 33.53 20.0 12.5 0.8 28.2 46 52 65 60 40-280

(M22) 2.5 34.0 37.72 22.0 14.0 0.8 30.0 50 56 69 65 50-280

M24 3.0 36.0 39.98 24.0 15.0 0.8 33.6 54 60 73 75 50-280

(M27) 3.0 41.0 45.20 27.0 17.0 1.0 38.0 60 66 79 85 70-300

M30 3.5 46.0 50.85 30.0 18.7 1.0 42.7 66 72 85 85 75-300

(M33) 3.5 50.0 55.55 33.0 21.0 1.0 46.6 72 78 91 95 75-300

M36 4.0 55.0 60.79 36.0 22.5 1.0 51.1 78 84 97 100 80-300

(M39) 4.0 60.0 66.44 39.0 25.0 1.0 55.9 84 90 103 110 90-300

M42 4.5 65.0 72.02 42.0 26.0 1.2 61.6 90 96 109 120 90-300

2
STALWART TECHNOSOURCE
Hexagon Head Bolts/Screws INDIA PVT LTD.

Metric Series-Physical Properties - Tightening Torques

Property Class 8.8 10.9


Physical Diameter < M 16 > M 16 all diameters
Properties Unit N/mm2 Kgf/mm2 N/mm2 Kgf/mm2 N/mm2 Kgf/mm2
Tensile Stength Min. 800 81.5 830 84.6 1040 106.0
Yield Strength, 0.2% offset
Min. 640 65.2 660 67.2 940 95.8
Proof Lead Stress 580 59.1 600 61.2 830 84.6
Shear Strength, Min. 480 48.9 498 50.8 624 63.6
Brinell HB 219-285 242-319 295-362
Hardness
Rockwell HRC 20-30 23-34 31-39

Elongation % on GL =5.65A. 12% Min. 9 % Min.


A= Cross Sectional Area.

Recommended Property Class 8.8 Property Class 10.9

Thread Stress Torque Induced Load Torque Induced Load


Tightening Torques Size Area
mm2 Nm Kgm. N Kgs. Nm Kgm. N Kgs.
and
Induced Loads: M4 8.78 3.0 0.30 3877 395 4.3 0.44 5695 580

M5 14.2 6.0 0.62 6361 648 8.9 0.91 9344 952


M6 20.1 10.3 1.05 9005 918 15.1 1.54 13230 1348
M8 36.6 25.0 2.54 16400 1671 37.0 3.73 24080 2455
M10 58.0 50.0 5.11 26360 2686 74.0 7.50 38700 3946
M12 84.3 87.0 8.90 38300 3905 128.0 13.08 56300 5735

(M14) 115.0 139.0 14.17 52300 5327 205.0 20.82 76800 7824

M16 157.0 214.0 21.82 72300 7375 315.0 32.06 106300 10832
(M18) 192.0 304.0 30.97 91200 9300 435.0 44.10 129900 13246
M20 245.0 431.0 43.91 116400 11868 615.0 62.54 165800 16903

(M22) 303.0 586.0 59.74 144000 14677 835.0 85.08 205100 20904
M24 353.0 745.0 75.94 167700 17100 1060.0 108.00 238700 24333

(M27) 459.0 1090. 111.00 218100 22234 1550.0 158.00 310400 31640
M30 561.0 1480.0 150.00 266600 27175 2105.0 214.60 379400 38671
(M33) 694.0 2013.0 205.20 329800 33618 2865.0 292.00 469300 47839

M36 817.0 2586.0 263.60 388200 39576 3680.0 375.00 552500 56318
Note:
The tightening torques calculated to induce (M39) 976.00 3346.0 341.10 463800 47278 4760.0 485.40 660000 67278
approximate stresses as under in screw
threads: 448 n/mm2 for Property Class 8.8 M42 1120.0 4135.0 421.50 532200 54253 5880.0 599.80 757400 77205
dia < M16 462 N/mm2 for Property Class 8.8
dia > M16 658 N/mm2 for Property Class 10.9.

3
STALWART TECHNOSOURCE
Hexagon Head Bolts/Screws INDIA PVT LTD.

Inch Series, UNC-Dimensions


Note:
1. The bolts and screws will generally conform to ANSI B 18.2.1
(Bolts/Screws) made to ANSI B. 18.2.1 will also generally conform to
B.S.1768).

2. Threads will conform to class 2A of ANSI B1.1 or BS 1580 for Unified


threads (Coarse Fine).
3. Material : Stalwart Technosource India Pvt Ltd. High grade carbon/alloy steel.
4. Heat Treatment: As per SAE grade 5 or 8 (Bolts/Screws made to
SAE grade 5 and 8 will also generally conform to requirements of
grade 'S' & 'V' of BS 1768 respectively.
5. Thread Length LT:
LT1 for L <
6 LT2 for L
>6
6. Screw lengths equal to or shorter than those listed in row 'LET' will be
threaded to head.
7. All dimensions are in inches.

Length of Thread Length


Thread Pitch W C B H R Q Range
Size UNC Max. Min. Max. Nom. Min. Min. LT1 LT2 LFT L

1/4" 20 0.4375 0.505 0.2500 0.158 0.015 0.411 3/4 - 1 1/2-2.1/4

5/16" 18 0.5000 0.577 0.3125 0.206 0.015 0.473 7/8 - 1.1/8 1/2-4

3/8" 16 0.5625 0.650 0.3750 0.238 0.015 0.535 1 - 1.1/4 1/2-4

7/16" 14 0.6250 0.722 0.4375 0.286 0.015 0.595 1.1/8 - 1.3/8 3/4-3.1/2

1/2" 13 0.7500 0.866 0.5000 0.318 0.015 0.720 1.1/4 1.1/2 1.1/2 3/4-3.1/2

5/8" 11 0.9375 1.083 0.6250 0.398 0.020 0.908 1.1/2 1.3/4 1.7/8 1-8

3/4" 10 1.1250 1.300 0.7500 0.473 0.020 1.090 1.3/4 2 2.1/8 1.1/2-8

7/8" 9 1.3125 1.515 0.8750 0.553 0.040 1.275 2 2.1/4 2.3/8 1.1/2-8

1" 8 1.5000 1.732 1.0000 0.617 0.060 1.463 2.1/4 2.1/2 2.5/8 1.1/2-8

4
Hexagon Head STALWART TECHNOSOURCE
Bolts/Screws INDIA PVT LTD.

Inch Series, UNC-Physical Properties-Tightening Torques:


Grade Grade 5 Grade 8
2 2
12000 lbs/in 150000 lbs/in
Tensile Strength (Min)
2 2
84.5 Kgf/mm 105.4Kgf/mm
2 2
85000 lbs/in 120000 lbs/in
Proof Load Stress
2 2
59.9 Kgf/mm 84.5 Kgf/mm
Elongation % on GL = 4 x Gauge
Dia 14% 12%
Rockwell Hardness RC 25-34 RC 33-39

Recommended Thread Stress Grade 5 Grade 8


Size Area
Tightening Torques
Torque Induced Load Torque Induced Load
and
1/4" 0.0324 99.1 2086 140 2948
Induced Loads 5/16" 0.0532 203.4 3426 287.4 4841
UNC Thread 3/8" 0.0786 360.5 5061 509.7 7152

7/16" 0.1078 577.1 6942 815.4 9809

1/2" 0.1438 879.6 9260 1243.2 13085

5/8" 0.2290 1705.2 14748 2409.5 20839

3/4" 0.3380 3020.0 21767 4267.6 30758

7/8" 0.4670 4868.5 30075 6878.7 42497

1" 0.6120 7291 39412 10302.9 55692

5
STALWART TECHNOSOURCE
Hexagon Nuts INDIA PVT LTD.

Metric Series-dimensions-Physical Properties


Note:
1. The nuts will generally conform to IS : 1364, ISO 4032, DIN 934, 970.
2. Threads will conform to class 6H of IS : 4218, Coarse Series.
3. Material & Heat Treatment To achieve mechanical properties of
Property Class 8 or 10 of IS : 1367-VI. ISO 898/2

4. Nuts of Property Class 8 are used with bolts of Property Class 8.8
Nuts of Property Class 10 are used with bolts of Property Class 10.9
(In general, nuts of a higher property class can replace nuts of a
lower property class in a joint)
5. In Bolts/Nut assembly, tightening should be done by rotation of nut.
Torque values as recommended in tables for bolts (p:5).
6. Sizes in brackets are non-preferred standards.
7. All dimensions are in millimeters.

Dimensions: Thread
Size
Pitch W
Max.
C
Min.
H
Max.

M4 0.7 7.0 7.66 3.20


M5 0.8 8.0 8.79 4.00 4.70
M6 1.0 10.0 11.05 5.00 5.20
M8 1.25 13.0 14.38 6.50 6.80
M10 1.5 16.0 17.77 8.00 8.40
M12 1.75 18.0 20.03 10.00 10.80
(M14) 2.0 21.0 23.35 11.00 12.80
M16 2.0 24.0 26.75 13.00 14.80
(M18) 2.5 27.0 29.56 15.00 15.80
M20 2.5 30.0 32.95 16.00 18.00
(M22) 2.5 34.0 37.72 18.00 19.40
M24 3.0 36.0 39.55 19.00 21.50
(M27) 3.0 41.0 45.20 22.00 23.80
M30 3.5 46.0 50.85 24.00 25.60
(M33) 3.5 50.0 55.37 26.00 28.70
M36 4.0 55.0 60.79 29.00 31.00
(M39) 4.0 60.0 66.44 31.00 33.40
M42 4.5 65.0 72.09 34.00

Property Class 8 Property Class 10

Nuts Size Proof Load Hardness Hardness Proof Load Hardness Hardness
Stress HV HR Stress HV HRC

N/mm2 N/mm2
Physical Over To Min. Max Min. Max Min. Max Min. Max

Properties M4 800 170


302
HRB 87
HRC 30
1040

M4 M7 810 1040
M7 M10 830 188 HRB 90 1040 272 353 26 36
M10 M16 840 1050
M16 M42 920 233 253 HRC 19 HRC 36 1060

6
STALWART TECHNOSOURCE
Hexagon Nuts INDIA PVT LTD.

Metric Series, UNC-Dimensions-Physical Properties


Note:
1. The nuts will generally conform to ANSI B 18.2.2 (Nuts made
as per ANSI B 18.2.2 will also generally conform to BS 1768).
2. Threads will conform to class 2B of ANSI B 1.1 and BS
1580 for Unified threads (coarse/fine)

3. Material & Heat Treatment


To achieve mechanical properties of SAE grade 5 or 8 (Nuts made
to SAE grade 5 and 8 will also generally conform to requirements
of grade 1 & 5 of B.S. 1768 respectively).
4. In Bolts/Nut assembly, tightening should be done by rotation
of nut. Torque values as recommended in tables for bolts
(p:7).
5. All dimensions are in inches.

Thread T. P. I. W C H
Dimensions: Size UNC Max. Max. Nom.

1/4" 20 0.4375 0.505 0.219

5/16" 18 0.5000 0.577 0.266

3/8" 16 0.5625 0.650 0.328

7/16" 14 0.6875 0.794 0.375

1/2" 13 0.7500 0.866 0.437

5/8" 11 0.9375 1.083 0.547

3/4" 10 1.1250 1.300 0.641

7/8" 9 1.3125 1.515 0.750

1" 8 1.5000 1.732 0.859

Grade For use with Proof Load Size Rockwell


Bolts of Stress Hardness
Grade
Physical
2
Properties 120000 Lbs/in
5 5 All Sizes RC 32 max
2
78.9 kgf/mm
2
150000 Lbs/in Up to 5/8" RC 24-32
8 8
2
102.6 kgf/mm above 5/8" RC 26-34

You might also like