Inductive sensor
NRN75-FP-A2-P3-V1
< 75 mm non-flush
< Reduction factor = 1
Dimensions
ø 9.5
LEDs
40
M12 x 1
22
ø 5.3
11
80
65
Release date: 2020-03-23 Date of issue: 2020-03-30 Filename: 182199_eng.pdf
65 LEDs
Technical Data
General specifications
Switching function complementary
Output type PNP
Rated operating distance sn 75 mm
Installation non-flush
Output polarity DC
Assured operating distance sa 0 ... 55 mm
Reduction factor rAl 1
Reduction factor rCu 1
Refer to "General Notes Relating to Pepperl+Fuchs Product Information".
Pepperl+Fuchs Group USA: +1 330 486 0001 Germany: +49 621 776 1111 Singapore: +65 6779 9091
www.pepperl-fuchs.com
[email protected] [email protected] [email protected] 1
Inductive sensor NRN75-FP-A2-P3-V1
Technical Data
Reduction factor r304 1
Reduction factor rSt37 1
Nominal ratings
Operating voltage UB 10 ... 30 V DC
Switching frequency f 0 ... 50 Hz
Hysteresis H typ. 3 %
Reverse polarity protection reverse polarity protected
Short-circuit protection pulsing
Voltage drop Ud ≤3V
Rated insulation voltage UBIS 50 V
Operating current IL 0 ... 200 mA
Off-state current Ir 0 ... 0.5 mA
No-load supply current I0 ≤ 20 mA
Time delay before availability tv ≤ 300 ms
Operating voltage indicator LED, green
Switching state indicator LED, yellow
Functional safety related parameters
MTTFd 824 a
Mission Time (TM) 20 a
Diagnostic Coverage (DC) 0%
Compliance with standards and directives
Standard conformity
Standards EN 60947-5-2:2007
IEC 60947-5-2:2007
Approvals and certificates
UL approval cULus Listed, General Purpose
CSA approval cCSAus Listed, General Purpose
CCC approval CCC approval / marking not required for products rated ≤36 V
Ambient conditions
Ambient temperature 0 ... 50 °C (32 ... 122 °F) (± 10 % changing operating distance)
-25 ... 70 °C (-13 ... 158 °F) (± 20 % changing operating distance)
Mechanical specifications
Connection type Connector M12 x 1 , 4-pin
Housing material PBT/metal
Sensing face PBT
Housing base metal
Degree of protection IP68
Release date: 2020-03-23 Date of issue: 2020-03-30 Filename: 182199_eng.pdf
Connection
1
L+
4
3
L-
Refer to "General Notes Relating to Pepperl+Fuchs Product Information".
Pepperl+Fuchs Group USA: +1 330 486 0001 Germany: +49 621 776 1111 Singapore: +65 6779 9091
www.pepperl-fuchs.com
[email protected] [email protected] [email protected] 2
Inductive sensor NRN75-FP-A2-P3-V1
Connection Assignment
2 4
Wire colors in accordance with EN 60947-5-2
1 BN (brown)
2 WH (white)
3 BU (blue)
4 BK (black)
Mounting
These sensors are also suitable for mounting on
metal. The stated switching distance ia achieved
with a metal base plate, min. dimensions
225 mm x 225 mm.
When mounted on a non-metallic base plate the
switching distance is reduced by approx. 10 %.
22
5
5
22
Release date: 2020-03-23 Date of issue: 2020-03-30 Filename: 182199_eng.pdf
Accessories
V1-G-2M-PUR Female cordset, M12, 4-pin, PUR cable
Refer to "General Notes Relating to Pepperl+Fuchs Product Information".
Pepperl+Fuchs Group USA: +1 330 486 0001 Germany: +49 621 776 1111 Singapore: +65 6779 9091
www.pepperl-fuchs.com
[email protected] [email protected] [email protected] 3
