Scribd
Upload
417 views2 pages

Visual Inspection SCRATA: Comparators For The Definition of Surface Quality of Castings

Visual inspection is commonly used to identify surface defects in castings by looking for issues like sand holes, rough surfaces, shrinkage, and slag. However, tactile comparators provide a more accurate and definitive way to specify and assess surface quality. These comparators are durable plastic replicas of different surface characteristics that are used around the world. They provide a practical alternative to photos and allow for clearer agreement on surface requirements in contracts and acceptance of castings. ASTM A802 defines 31 comparators covering features like surface roughness, inclusions, and gas porosity. Larger comparator sets of 48 and 14 plates also exist under other standards for different casting techniques.

Uploaded by

MARIO SANDOVAL PAIPAY
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
417 views2 pages

Visual Inspection SCRATA: Comparators For The Definition of Surface Quality of Castings

Visual inspection is commonly used to identify surface defects in castings by looking for issues like sand holes, rough surfaces, shrinkage, and slag. However, tactile comparators provide a more accurate and definitive way to specify and assess surface quality. These comparators are durable plastic replicas of different surface characteristics that are used around the world. They provide a practical alternative to photos and allow for clearer agreement on surface requirements in contracts and acceptance of castings. ASTM A802 defines 31 comparators covering features like surface roughness, inclusions, and gas porosity. Larger comparator sets of 48 and 14 plates also exist under other standards for different casting techniques.

Uploaded by

MARIO SANDOVAL PAIPAY
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Visual Inspection SCRATA

Comparators for the Definition of Surface Quality of Castings

Visual inspection is based on the use of the human eye to identify surface defects, improper filling and
molding errors. Casting defects that can be detected via visual inspection include sand holes, excessively
rough surface, surface shrinkage, blowholes, misruns, cold shuts, and surface dross or slag.

Purchasers of castings can specify and assess surface quality and surface
texture more accurately and definitively using tactile comparators.These
provide a practical and functional alternative to photographic representation
of casting surfaces in standards such as MSS SP-55-2001.

More than 2000 of these sets of comparators are used around the world by
multi-national companies and by small enterprises.The durable plastic
comparator plates, actual replicas of relevant characteristics of surface finish,
have proved to be a more attractive way of reaching agreement with casting
suppliers on the required surface quality during contract negotiations. They
also provide a basis for acceptance of the castings after order placement.
CTI

The comparators form the basis of ASTM A802/A802M – 95 (2006) Standard Practice for Steel
Castings, Surface Acceptance Standards, Visual Examination.

This standard comprises 31 comparators that define features such as:

• Surface Roughness (A)


• Surface Inclusions (B)
• Gas Porosity (C)
• Laps and Cold Shuts (D)
• Scabs (E)
• Chaplets (F)
• Surface Finish – Thermal Dressing (G)
• Surface Finish – Mechanical Dressing (H)
• Welds (J)
• Hot Tears
• Mechanical Dressing - Chipping

Number of
Comparator Categories
Comparators Hot
A B C D E F G H J Chipping
Tears

ASTM 1,2, 1,2, 1,2, 1,3, 1,2,


31 1-4 1-4 3,5 1,3 - -
A802 4,5 5 3,5 4,5 3,5

1 von 2
A larger, 48 comparator set applies to
ISO 11971: 2008 Steel and Iron Castings – Visual examination of surface quality
BS EN 1370: 1997 Founding – Surface roughness inspection by visual tactile comparators
BS EN 12454: 1998 Founding– Visual examination of surface discontinuities–Steel sand castings

(Companies that already have the ‘short’ ASTM A802 set can upgrade to the larger set
by purchasing the 17 additional comparator plates).

Number of
Comparator Categories
Comparators Hot
A B C D E F G H J Chipping
Tears

Full Set 48 1-5 1-5 1-5 1-5 1-5 1-5 1-5 1-5 1-5 1-2 1

Upgrade
17 5 3 5 3,4 1,2,4 2,4,5 4 2 4 1-2 1
to Full Set

A third set of 14 comparators, the basis of BS 7900:1998 Specification for examination of the surface texture of
precision steel castings, is applicable to the procurement of steel castings manufactured by precision casting
techniques:

• Resin Shell Process (V)


• Lost Polystyrene Process (W)
• Shaw Process (X)
• Lost Wax Process (Y)
• Fettled Surfaces (Z)

Number of Comparator Categories


Comparators V W X Y Z

Precision Set 14 1-3 1-3 1-3 1-2 1-3

2 von 2

You might also like