ANNEXURE

Programmer
DESCRIPTION:
93704 supported devices from 324 manufacturers by 3.21 version of SW
(28. Jan. 2016)
very fast programming, one of the fastest programmers in this category.
Programs 64‐Mbit NOR Flash memory in less than 46 seconds and 1Gbit
NAND Flash in less than 120 sec.
48‐pins powerful pindrivers, no adapter required for any DIL devices
ISP connector for in‐circuit programming
dual connection to PC: USB (up to 480 Mbit/s) or parallel (printer) port
USB 2.0 (high speed, full speed) and 1.1 compatible interface
alternatively high‐speed IEEE 1284 (ECP/EPP) printer‐port (LPT) interface
comfortable and easy to use control program, works with all versions of
MS Windows from Windows XP to Windows 10 (32‐bit and 64‐bit*)
unique quick reaction to customer's needs ‐ software update can be
ready within a day from request by OnDemand software
Multiprogramming possible by attaching more programmers to one PC
made in Slovakia
warranty ‐ 3 years
approved by CE laboratory to meet CE requirements
CE requirements for BeeProg+ device programmer
OPTIONAL ACCESSORIES:
Programming Adapters (Socket Converters)
Accessories: Calibration test POD, Vacuum pen, LPT port cable, ...
GENERAL FEATURES
Next generation of USB/LPT‐compatible, MS Windows (from Windows XP
to Windows 10 32‐bit and 64‐bit) based ELNEC universal programmers,
built to meet the strong demand of the small manufacturing and
developers community for the fast and reliable universal programmer.
Supports all kinds of types and silicon technologies of today and
tomorrow programmable devices without family‐specific module. You
have freedom to choose the optimal device for your design. Using built‐in
in‐circuit serial programming (ISP) connector, the programmer is able to
program ISP capable chips in circuit.
BeeProg+ isn't only a programmer, but also a tester of TTL/CMOS logic
ICs and memories. Furthermore, it allows generation of user‐definable
test pattern sequences.
Provides very competitive price coupled with excellent hardware design
for reliable programming. Probably best "value for money"programmer
in this class.
Very fast programming due to high‐speed FPGA driven hardware and
execution of time‐critical routines inside of the programmer. At least fast
than competitors in this category, for many chips much faster than most
competitors. As a result, when used in production this one‐socketprogrammer
waits for an operator, and not the other way round.
BeeProg+ interfaces with the IBM PC compatible or higher, portable or
desktop personal computers through USB (2.0/1.1) port or any standard
parallel (printer) port. Programmer can utilize power of both USB highspeed
port and IEEE1284 (ECP/EPP) high‐speed parallel port. Support of
both USB/LPT port connection gives you the choice to connect the
BeeProg+ programmer to any PC, from latest notebook to older desktop
without USB port.
HARDWARE
FPGA based totally reconfigurable 48 powerful TTL pindrivers provide
H/L/pull_up/pull_down and read capability for each pin of socket.
Advanced pindrivers incorporate high‐quality high‐speed circuitry to
deliver signals without overshoot or ground bounce for all supported
devices. Improved pin drivers drivers operate down to 1.8V so you'll be
ready to program the full range of today's advanced low‐voltage devices.
The programmer performs device insertion test (wrong or backward
position) and contact check (poor contact pin‐to‐socket) before it
programs each device. These capabilities, supported by overcurrent
protection and signature‐byte check help prevent chip damage due to
operator error.
The selftest capability allow to run diagnostic part of software to
thoroughly check the health of the programmer.
Built‐in protection circuits eliminate damage of programmer and/or
programmed device due to environment or operator failure. All the
inputs of the BeeProg+ programmer, including the ZIF socket, connection
to PC and power supply input, are protected against ESD up to 15kV.
BeeProg+ programmer performs programming verification at the
marginal level of supply voltage, which, obviously, improves
programming yield, and guarantees long data retention.
Various programming adapters are available to handle device in PLCC,
JLCC, SOIC, SDIP, SOP, PSOP, SSOP, TSOP, TSOPII, TSSOP, QFP, PQFP,
TQFP, VQFP, QFN (MLF), SON, BGA, EBGA, FBGA, VFBGA, UBGA, FTBGA,
LAP, CSP, SCSP, LQFP, MQFP, HVQFN, QLP, QIP and other packages.

SOFTWARE
Programmer is driven by an easy‐to‐use control program with pull‐down
menu, hot keys and on‐line help. Selecting of device is performed by its
class, by manufacturer or simply by typing a fragment of vendor name
and/or part number.
Standard device‐related commands (read, blank check, program, verify,
erase) are boosted by some test functions (insertion test, signature‐byte
check), and some special functions (autoincrement, production mode ‐
start immediately after insertion of chip into socket).
All known data formats are supported. Automatic file format detection
and conversion during loading of file.
The rich‐featured auto‐increment function enables one to assign
individual serial numbers to each programmed device ‐ or simply
increments a serial number, or the function enables one to read serial
numbers or any programmed device identification signatures from a file.
The software also provide a many information about programmed
device. As a special, the drawings of all available packages are provided.
The software provide also explanation of chip labelling (the meaning of
prefixes and suffixes at the chips) for each supported chip.
The software provide a full information for ISP implementation:
Description of ISP connector pins for currently selected chip,
recommended target design around in‐circuit programmed chip and
other necessary information.
The remote control feature allows to be PG4UW software flow controlled
by other application – either using .BAT file commands or using DLL file.
DLL file, examples (C/PAS/VBASIC/.NET) and manual are part of standard
software delivery.
Jam files of JEDEC standard JESD‐71 are interpreted by Jam Player. Jam
files are generated by design software which is provided by manufacturer
of respective programmable device. Chips are programmed in‐ZIF or
through ISP connector (IEEE 1149.1 Joint Test Action Group (JTAG)
interface).
VME files are interpreted by VME Player. VME file is a compressed binary
variation of SVF file and contains high‐level IEEE 1149.1 bus operations.
SVF files are interpreted by SVF Player. SVF file (Serial Vector Format)
contains high‐level IEEE 1149.1 bus operations. SVF files are generated by
design software which is provided by manufacturer of respective
programmable device. Chips are programmed in‐ZIF or through ISP
connector (IEEE 1149.1 Joint Test Action Group (JTAG) interface). VME
files are generated by design software which is provided by manufacturer
of respective programmable device. Chips are programmer in‐ZIF or
through ISP connector (IEEE 1149.1 Joint Test Action Group (JTAG)
interface).
Multiple devices are possible to program and test via JTAG chain: JTAG
chain (ISP‐Jam), JTAG chain (ISP‐VME), JTAG chain (ISP‐SVF) or JTAG chain
(ISP‐STP).
Attaching of more BeeProg+ programmers to the same PC (through USB
port) is achieved a powerful multiprogramming system, which support as
many chips, as are supported by BeeProg+ programmer and without
obvious decreasing of programming speed. It is important to know, there
is a concurrent multiprogramming ‐ each programmer works
independently and each programmer can program different chip, if
necessary.