HSN8500NA PRODUCT OVERVIEW

HSN8500NA is a member of the cost-effective and highly scalable

product line. This system is generally deployed in central
al
ct
offices or BBU hotels. Like the other systems in the flexiHaul product
line, HSN8500NA has a flexible, pay-as-you-grow architecture with
plug-in service cards, thereby allowing the customer the ability
to choose any combination of supported services as well as
facilitate easy operation and maintenance. This 8U shelf includes
twenty service slots used to transport different fronthaul services
via CWDM / DWDM over dark fiber.

HSN8500NA serves as an aggregator for the full flexiHaul line-up

where the following serve as remote terminals :
HSN8300NA, and HSN8100NA.

int
HSN8500NA supports point to point, linear chain, point to multi-point
and ring with ring protection. In addtion, HSN8500NA is efficiently
managed by EMS, which provides the necessary tools for both traffic [HSN8500NA]
provisioning and overall system monitoring.

PRIMARY APPLICATION KEY FEATURES

. CPRI fronthaul interface in C-RAN architecture between BBU and RRHs . Multi-protocol support
. Ethernet backhaul interface for distributed RAN architecture - CPRI (option 2, 3, 5, 7), GbE
. Wavelength switching, grooming and aggregation . Supports 1 or 2 rings
. 4 x CPRI muxing into a 10 Gbps line
ARCHITECTURE . CPRI delay (one-way, 2 modules without FEC)
. High scalability (Max. 80 ports CPRI) - Transponder < 1 ㎲
. Plug-in architecture: any module in any slot - Muxponder < 3 ㎲
. Jitter : less than ± 0.35 UI
OAM and MAINTAINABILITY . Ring protection switching less than 50 ms
. Alarms, statistics, performance monitoring - Delay equalization for ring protection
. Remote management via optical supervisory channel (OSC)
. Local / remote logical loopbacks . FEC (Forward Error Correction) support
. Connectivity, signal level, delay, distance measurement . Topology : point to point, linear chain, ring,
point to multi-point

     

 
      
 


  

  

         
 HSN8500NA SYSTEM SPECIFICATION
System Capacity Supported Service Modules
Service slots 20 TTU4G (4-Port basic transponder)
CPRI capacity Up to 80 channels
Type CPRI 3/5/7 x 4 ports (any rate mix) or
CWDM / DWDM ITU-T G.694.1, ITU-T G.694.2
CPRI 3/5/7 x 3 ports (any rate mix) + GbE x 1 port
Transmission distance Up to 20 km
Protocols CPRI (option 3, 5, 7), GbE
Channel Interface Client / WDM ports 4/4
Service interface CPRI (option 2, 3, 5, 7), GbE Line monitoring LOS
Optical connector type LC / UPC Performance monitoring SFP/SFP+ DDM
CPRI delay (one-way) < 0.5 ㎲
Muxponder / Multi-rate transponder
Muxponder 4 ports CPRI (option 2, 3) OTU4G (4-Port enahnced transponder)
2 ports CPRI (option 5) Type CPRI 3/5/7 x 4 ports (any rate mix) or
Multi-rate transponder 4 ports CPRI (option 3, 5, 7) CPRI 3/5/7 x 3 ports (any rate mix) + GbE x 1 port
Protocols CPRI (option 3, 5, 7), GbE
Configurations / Power / Environmental
Client / WDM ports 4/4
Topology Point to point, linear chain, point to multi-point, ring CPRI / Line monitoring LOS, LOF, CV, BIP, AIS, RDI
Power - 48 V DC ( - 40 ~ - 56 V DC) Performance monitoring SFP/SFP+ DDM, BIP, ES, SES, UAS
+ 24 V DC ( + 20 ~ + 28 V DC) FEC Support
Environmental Operating : - 5 °C ~ + 55 °C , Storage : - 40 °C ~ + 70 °C CPRI delay (one-way) < 0.5 ㎲ (without FEC)
Humidity : Up to 85% (non-condensing) Profile Low latency profile
Protection / Switching Standard OAM profile
High link budget profile (FEC enabled)
Switching time < 50 ms Delay Equalization Support
Operating mode Automatic, manual
Configuration Non-revertive switching, revertive switching ATU10F (4-Port muxponder)
Type CPRI 2/3 x 4 ports or
OAM CPRI 2/3 x 2 ports + GbE x 2 ports
Fault control Alarm severity : Critical, Major, Minor, Warning CPRI 2/3 x 3 ports + GbE x 1port
Classification level Unit, Module, Port CPRI 5 x 2 ports
Performance monitoring 15 min, 1 day CPRI 2/3 x 2 ports + CPRI 5 x 1 port
Test function Local / remote loopback Protocols Client side : CPRI (option 2, 3, 5), GbE
Delay measurement WDM side : 10 Gbps
BERT Client / WDM ports 4/1
Visual LED Indicators System activity, system failure, ACO, CPRI / Line monitoring LOS, LOF, CV, BIP, AIS, RDI
Alarms status (Critical, Major, Minor) Performance monitoring SFP/SFP+ DDM, BIP, ES, SES, UAS
Environmental and Office Alarms 7 Housekeeping inputs FEC Support
6 Office Alarm outputs CPRI delay (one-way) < 1.5 ㎲ (without FEC)
Delay Equalization Support
Network Management
Operation EMS (server, client), Local Craft Terminal Main Control Unit (MCU)
Protocols SNMPv2 / v3 Type Main Control Process Unit
Physical interface 10 / 100 / 1000 Base-TX Console port RS-232C x 1 port
Management port 100 / 1000 Base-TX x 2 ports (WAN)
Physical Characteristics Shelf Extension & Local Management Port(LMP)
Dimension 19” or 23” rack mountable 100 / 1000 Base-TX x 2 ports (LAN)
355 (H) x 481 (W) x 300 (D) mm LEDs System activity, system failure
Weight 27.05 kg System alarm LED : CRI / MAJ / MIN / ACO
Power consumption 680 W (Fully loaded) WAN/LAN status : Act, Link

Regulatory & Compliance Data Communiction Unit (DCU)

FCC Part 15 Class A Type Data Communication Unit
CE Mark OSC ports 6 ports
UL 60950-1, IEC 60950-1 LEDs Unit status, Link status
IC (Canada EMI)
CB
NEBS Level 3
ATT-TP-76200, Issue 19, June 2014
VZ TPR 9205, Issue 5, Octorber 2011

Support proudly provided by Fujitsu Network Communications, Richardson Texas

For more information, please contact your Fujitsu Sales Representative
Fujitsu Network Communications, Inc.
2801 Telecom Parkway, Richardson, TX 75082 Tel : 888.362.7763 us.fujitsu.com/telecom