Savitribai Phule Pune University

Board of Studies - Automobile and Mechanical Engineering

Undergraduate Program - Automobile Engineering & Mechanical Engineering (2019 pattern)
Teaching
Scheme Examination Scheme
(Hours/ Credit
and Marks
Course Week)
Course Name
Code

TOTAL

TOTAL
TUT

TUT
ESE
TW
ISE
TH

OR

TH
PR

PR

PR
Semester-III
202041 Solid Mechanics 4 2 - 30 70 - 50 - 150 4 1 - 5
202042 Solid Modeling and Drafting 3 2 - 30 70 - 50 - 150 3 1 - 4
202043 Engineering Thermodynamics 3 2 - 30 70 - - 25 125 3 1 - 4
202044 Engineering Materials and Metallurgy 3 2 - 30 70 25 - - 125 3 1 - 4
203156 Electrical and Electronics Engineering 3 2 - 30 70 25 - - 125 3 1 - 4
202045 Geometric Dimensioning and Tolerancing Lab - 2 - - - 25 - - 25 - 1 - 1
202046 Audit Course - III - - - - - - - - - - - - -
Total 16 12 - 150 350 75 100 25 700 16 6 - 22

Semester-IV
207002 Engineering Mathematics - III 3 - 1 30 70 25 - - 125 3 - 1 4
202047 Kinematics of Machinery 3 2 - 30 70 - - 25 125 3 1 - 4
202048 Applied Thermodynamics 3 2 - 30 70 - - 25 125 3 1 - 4
202049 Fluid Mechanics 3 2 - 30 70 - - 25 125 3 1 - 4
202050 Manufacturing Processes 3 - - 30 70 - - - 100 3 - - 3
202051 Machine Shop - 2 - - - 50 - - 50 - 1 - 1
202052 Project Based Learning - II - 4 - - - 50 - - 50 - 2 2
202053 Audit Course - IV - - - - - - - - - - - - -
Total 15 12 1 150 350 125 - 75 700 15 6 1 22
Abbreviations: TH: Theory, PR: Practical, TUT: Tutorial, ISE: In-Semester Exam, ESE: End-
Semester Exam,TW: Term Work, OR: Oral
Note: Interested students of SE (Automobile Engineering and Mechanical Engineering) can opt for
any one of the audit course from the list of audit courses prescribed by BoS (Automobile and
Mechanical Engineering)
Instructions
 Practical/Tutorial must be conducted in three batches per division only.
 Minimum number of required Experiments/Assignments in PR/ Tutorial shall be carried out as
mentioned in the syllabi of respective subjects.
 Assessment of tutorial work has to be carried out as a term-work examination. Term-work
Examination at second year of engineering course shall be internal continuous assessment only.
 Project based learning (PBL) requires continuous mentoring by faculty throughout the semester
for successful completion of the tasks selected by the students per batch. While assigning the
teaching workload of 2 Hrs/week/batch needs to be considered for the faculty involved. The
Batch needs to be divided into sub-groups of 5 to 6 students. Assignments / activities / models/
projects etc. under project based learning is carried throughout semester and Credit for PBL has
to be awarded on the basis of internal continuous assessment and evaluation at the end of
semester.
 Audit course is mandatory but non-credit course. Examination has to be conducted at the end of
Semesters for award of grade at institute level. Grade awarded for audit course shall not be
calculated for grade point & CGPA.
 202042 - Solid Modeling and Drafting
Teaching Scheme Credits Examination Scheme
Theory : 03 Hr./Week 04 In-Semester : 30 Marks
Practical : 02 Hr./Week Theory : 03 End-Semester : 70 Marks
Practical : 01 Practical : 50 Marks
Prerequisite Courses
Systems in Mechanical Engineering, Engineering Graphics, Engineering Mathematics - I and II
Course Objectives
1. To understand basic structure of CAD systems and their use to create geometric models of simple
engineering parts
2. To introduce the curves and surfaces and their implement in geometric modeling
3. To apply basic concepts of 3D modeling, viewing and evaluate mass properties of components
and assemblies
4. To apply geometrical transformations in CAD models
5. To understand data exchange standards and translators for various applications
6. To create engineering drawings, design documentation and use in manufacturing activities
Course Outcomes
On completion of the course, learner will be able to
CO1. UNDERSTAND basic concepts of CAD system, need and scope in Product Lifecycle
Management
CO2. UTILIZE knowledge of curves and surfacing features and methods to create complex solid
geometry
CO3. CONSTRUCT solid models, assemblies using various modeling techniques & PERFORM
mass property analysis, including creating and using a coordinate system
CO4. APPLY geometric transformations to simple 2D geometries
CO5. USE CAD model data for various CAD based engineering applications viz. production
drawings, 3D printing, FEA, CFD, MBD, CAE, CAM, etc.
CO6. USE PMI & MBD approach for communication
Course Contents
Unit I Fundamentals of 3D Modeling [08 Hr.]
Introduction, Product Life Cycle, CAD tools in the design process of Product Cycle, Scope of CAD,
Software Modules - Operating System (OS) module, Geometric module, application module,
programming module, communication module, Computer Aided Design - Features, requirements and
applications
3D Modeling approach - Primitive, Features and Sketching, Types of Geometric models - 2½
extrusions, axisymmetric, composite, 3D objects, difference between wireframe, surface & solid
modeling, Modeling strategies
Model viewing: VRML web-based viewing
Unit II Curves & Surfaces [08 Hr.]
Curves: Methods of defining Point, Line and Circle, Curve representation - Cartesian and Parametric
space, Analytical and Synthetic curves, Parametric equation of line, circle, ellipse, Continuity (C 0, C1
& C2), Synthetic Curves - Hermit Cubic Spline, Bezier, B-Spline Curve, Non-Uniform Rational B-
Spline curves (NURBS)
Surfaces: Surface representation, Types of Surfaces, Bezier, B-Spline, NURBS Surface, Coons
patch surface, Surface Modeling
Reverse Engineering: Introduction, Point Cloud Data (PCD), PCD file formats, Quality issues in
PCD, Requirements for conversion of surface models into solid models, Applications of PCD
Unit III Solid Modeling [08 Hr.]
Introduction, Geometry and Topology, Solid entities, Solid representation, Fundamentals of Solid
modeling, Half spaces, Boundary representation (B-Rep), Constructive Solid Geometry (CSG),
Sweep representation, Analytical solid modeling, Parametric solid modeling, feature based modeling,
etc., Euler Equation (Validity of 3D solids), Mass Property Calculations
Introduction to Assembly Modeling, Assemblies (Top-down and Bottom-up approach), Design for
Manufacturing [DFM], Design for Easy Assembly & Disassembly [DFA], Design for Safety
Unit IV Geometric Transformation [08 Hr.]
Introduction, Geometric Transformations, Translation, Scaling, Rotation, Reflection/Mirror, Shear,
Homogeneous Transformation, Inverse Transformation, Concatenated Transformation (limited to 2D
objects with maximum 3 points only), Coordinate systems - Model (MCS), Working (WCS), Screen
(SCS) coordinate system, Mapping of coordinate systems
Projections of geometric models - Orthographic and Perspective projections, Design and Engineering
applications
Unit V CAD Data Exchange [08 Hr.]
Introduction, CAD Kernels, CAD Data File, Data interoperability, CAD Data Conversions,
challenges in CAD data conversions/remedies, Direct Data Translators, Neutral 3D CAD file formats
(DXF, IGES, PDES, STEP, ACIS, Parasolid, STL, etc.), Data Quality
Requirements of CAD file format for 3D Printing (Additive Manufacturing), CAE, FEA, CFD, CAM
(Subtractive Manufacturing), Multi-Body Dynamics (Motion Simulations), Computer Aided
Inspection (CAI), Computer Aided Technologies (CAx), AR/VR applications, etc., Introduction to
CAD Geometry Clean-up for different applications
Unit VI CAD Customization & Automation [08 Hr.]
Introduction, Limitations of 2D drawings, Introduction to Product and Manufacturing Information
(PMI), Model Based Definitions (MBD), Applications of PMI & MBD
CAD Customization: Introduction, advantages and disadvantages, Applications of Customization
Interfaces, Product Customization Approaches - Part Modeling Customization, Assembly Modeling
Customization, Drawing sheets & PMI Customization, CAD Automation
Introduction to Application Programming Interface (API), Structures of APIs, Coding/Scripting for
customization, Introduction to CAD API Development, CAD Files & application handling
Books & Other Resources
Text Books
1. Zeid, I and Sivasubramania, R., (2009), “CAD/CAM : Theory and Practice”, 2nd edition,
McGraw Hill Education, ISBN-13: 978-0070151345
2. Rao, P. N., (2017), “CAD/CAM: Principles and Applications”, 3rd edition, McGraw Hill
Education, ISBN-13: 978-0070681934
3. Chang, Kuang-Hua, (2015), "e-Design: Computer-Aided Engineering Design", Academic Press,
ISBN-13: 978-0123820389
Reference Books
1. Lee, Kunwoo, (1999), "Principles of CAD/CAM/CAE Systems", Pearson/Addison-Wesley,
ISBN-13: 978-0201380361
2. Bordegoni, Monica and Rizzi, Caterina, (2011), "Innovation in Product Design: From CAD to
Virtual Prototyping", Springer, ISBN-13: 978-1447161875
3. Vukašinovic, Nikola and Duhovnik, Jože, (2019), "Advanced CAD Modeling: Explicit,
Parametric, Free-Form CAD and Re-engineering", Springer, ISBN-13: 978-3030023980
4. Um, Dugan, (2018), "Solid Modeling and Applications: Rapid Prototyping, CAD and CAE
Theory", 2nd edition, Springer, ISBN-13: 978-3319745930
5. Rogers, D. and Adams, J. A., (2017), “Mathematical Elements for Computer Graphics”, 2nd
edition, McGraw Hill Education, ISBN-13: 978-0070486775
6. Hearn, D. D. and Baker, M. P., (2013), "Computer Graphics with OpenGL", 4th edition, Pearson
Education India, ISBN-13: 978-9332518711
7. Gokhale, N. S., Deshpande, S. S., Bedekar, S. V. and Thite, A. N., (2008), “Practical Finite
Element Analysis”, Finite to Infinite, Pune, India, ISBN-13: 978-8190619509
8. Lee Ambrosius, (2015), “AutoCAD® Platform Customization: User Interface, AutoLISP®, VBA,
and Beyond”, John Wiley & Sons, Inc., IN, ISBN-13: 978-1118798904
9. Bucalo, Joe and Bucalo, Neil, (2007), “Customizing SolidWorks for Greater Productivity”, Sheet
Metal Guy, LLC, ISBN-13: 978-0979566608
10. Ziethen, Dieter R. (2012), “CATIA V5: Macro Programming with Visual Basic Script”,
McGraw-Hill Companies, Inc./Carl Hanser Verlag München, ISBN-13: 978-0071800020, ISBN:
978-007180003-7
11. Programming Manuals of Softwares
Guidelines for Laboratory Conduction
The student shall complete the following activity as a Term Work Journal
Practical
The student shall complete the following Practical in laboratory using suitable CAD modeling
software. Learner will demonstrate skills to communicate drawings as per industry standards.
1. 2-D sketching with geometrical and dimensional constraints
2. Solid & Surface modeling for simple mechanical components (Output file as Production drawing
and Model Based Definition (MBD)
(a) Sheet-Metal (b) Machining
(c) Fabrication (d) Casting
(e) Forgings (f) Plastic Molding
3. Assembly modeling (Output file as Assembly drawing and detailing) of the parts modeled in
Practical assignment-2 using proper assembly constraint conditions and generation of exploded
view for assemblies like Couplings, Clutches, Gear Assemblies, Engine/Pump/Turbine
Components, Valves, Machine Tools, Automobile Components, Gear-Box, Pressure Vessels, etc.
4. Reverse Engineering of surface/solid modeling using Point Cloud Data.
5. Assembly Modeling by importing parts/components from free online resources like CAD and
Product development software websites, forums, blogs, etc.
6. Demonstration on CAD Customization (with introduction to programming languages,
interfacing)