TEST REPORT

Test report no.: 1-9177/15-28-03-B

Testing laboratory Applicant

CETECOM ICT Services GmbH FURUKAWA AUTOMOTIVE SYSTEMS INC.
Untertuerkheimer Strasse 6 – 10 1000 Amago, Koura-cho, Inukami-gun
66117 Saarbruecken / Germany 522-0242 Shiga / Japan
Phone: + 49 681 5 98 - 0 Phone: +81(0)463-24-8496
Fax: + 49 681 5 98 - 9075 Contact: Mr. Noritaka Murofushi
Internet: http://www.cetecom.com e-mail: [email protected]
e-mail: [email protected] Phone: +81(0)463-24-8496
Accredited Testing Laboratory:
The testing laboratory (area of testing) is accredited
according to DIN EN ISO/IEC 17025 (2005) by the Manufacturer
Deutsche Akkreditierungsstelle GmbH (DAkkS) FURUKAWA AUTOMOTIVE SYSTEMS INC.
The accreditation is valid for the scope of testing 1000 Amago, Koura-cho, Inukami-gunxxx
procedures as stated in the accreditation certificate with 522-0242 Shiga / Japan
the registration number: D-PL-12076-01-00

Test standard/s
FCC 47 CFR Part 15 Title 47 of the Code of Federal Regulations; Chapter I
Part 15 - Radio Frequency Devices
RSS-310 Spectrum Management and Telecommunications - Radio Standards Specification
Licence-exempt Radio Apparatus (all frequency bands): Category II Equipment

For further applied test standards please refer to section 3 of this test report.

Test Item
Kind of test item: 24GHz Pulse Radar
Model name: 24GMMR1A
FCC ID: 2AHE9-24GMMR1A

Frequency: 24.05 - 24.25 GHz

Antenna: Planar Patch
Power Supply: 12 V DC from power supply
Temperature Range: -40 °C to +85 °C

This test report is electronically signed and valid without handwriting signature. For verification of the electronic signatures,
the public keys can be requested at the testing laboratory.

Test report authorized: Test performed:

cn=Meheza Walla, o=CETECOM ICT
DN: cn=Karsten Geraldy, o=CETECOM ICT
Services GmbH, ou=WAL-151005,
Services GmbH, ou=GER-151201,
[email protected],
[email protected], c=DE
c=DE
Datum: 2016.03.23 10:17:44 +01'00'
p.o. 2016.03.23 10:05:04 +01'00'

Karsten Geraldy Benedikt Gerber

Lab Manager Testing Manager
Radio Communications & EMC Radio Communications & EMC

Page 1 of 27
 Test report no.: 1-9177/15-28-03-B

1 Table of contents

1 Table of contents ............................................................................................................................................2

2 General information .......................................................................................................................................3
2.1 Notes and disclaimer ..........................................................................................................................3
2.2 Application details ...............................................................................................................................3
3 Test standard/s ...............................................................................................................................................3
4 Test environment ............................................................................................................................................4
5 Test item ..........................................................................................................................................................4
5.1 Additional comments ..........................................................................................................................4
6 Test laboratories sub-contracted .................................................................................................................4
7 Description of the test setup .........................................................................................................................5
7.1 Radiated measurements chamber F ..................................................................................................6
7.2 Radiated measurements chamber A .................................................................................................7
7.3 Radiated measurements 12 GHz to 50 GHz ......................................................................................8
7.4 Radiated measurements above 50 GHz ............................................................................................9
8 Summary of measurement results .............................................................................................................10
9 Measurement results....................................................................................................................................11
9.1 Antenna Requirement .......................................................................................................................11
9.2 Field strength of emissions (wanted signal) ..................................................................................12
9.3 Occupied bandwidth (26 dB bandwidth and 99% bandwidth) ......................................................15
9.4 Field strength of emissions (radiated spurious and harmonics) .................................................17
10 Maximum Permissible Exposure (MPE) ..............................................................................................24
Annex A Document history ..........................................................................................................................26
Annex B Further information ........................................................................................................................26
Annex C Accreditation Certificate ...............................................................................................................27

Page 2 of 27
 Test report no.: 1-9177/15-28-03-B

2 General information

2.1 Notes and disclaimer

The test results of this test report relate exclusively to the test item specified in this test report. CETECOM ICT
Services GmbH does not assume responsibility for any conclusions and generalizations drawn from the test
results with regard to other specimens or samples of the type of the equipment represented by the test item.
The test report may only be reproduced or published in full. Reproduction or publication of extracts from the
report requires the prior written approval of CETECOM ICT Services GmbH.
The testing service provided by CETECOM ICT Services GmbH has been rendered under the current "General
Terms and Conditions for CETECOM ICT Services GmbH".
CETECOM ICT Services GmbH will not be liable for any loss or damage resulting from false, inaccurate,
inappropriate or incomplete product information provided by the customer.
Under no circumstances does the CETECOM ICT Services GmbH test report include any endorsement or
warranty regarding the functionality, quality or performance of any other product or service provided.
Under no circumstances does the CETECOM ICT Services GmbH test report include or imply any product or
service warranties from CETECOM ICT Services GmbH, including, without limitation, any implied warranties of
merchantability, fitness for purpose, or non-infringement, all of which are expressly disclaimed by CETECOM
ICT Services GmbH.
All rights and remedies regarding vendor’s products and services for which CETECOM ICT Services GmbH has
prepared this test report shall be provided by the party offering such products or services and not by CETECOM
ICT Services GmbH.
In no case this test report can be considered as a Letter of Approval.

This test report is electronically signed and valid without handwriting signature. For verification of the electronic
signatures, the public keys can be requested at the testing laboratory.

This test report replaces the test report with the number 1-9177/15-28-03-A and dated 2016-03-02!

2.2 Application details

Date of receipt of order: 2015-09-29
Date of receipt of test item: 2016-01-25
Start of test: 2016-02-10
End of test: 2016-02-22
Person(s) present during the test: -/-

3 Test standard/s
Test standard Date Test standard description

FCC 47 CFR Part 15 2014-10 Title 47 of the Code of Federal Regulations; Chapter I
Part 15 - Radio Frequency Devices
RSS-310 2010-12 Spectrum Management and Telecommunications - Radio
Standards Specification
Licence-exempt Radio Apparatus (all frequency bands): Category
II Equipment

Page 3 of 27
 Test report no.: 1-9177/15-28-03-B

4 Test environment
Tnom +22 °C during room temperature tests
Temperature: Tmax -/- °C during high temperature tests
Tmin -/- °C during low temperature tests

Relative humidity: 45 %

Barometric pressure: not relevant for this kind of testing

Vnom 12.0 V DC from power supply

Power supply: Vmax 16.0 V DC
Vmin 8.0 V DC

5 Test item

Kind of test item : 24GHz Pulse Radar

Type identification : 24GMMR1A

HMN : NA
PMN : 24GMMR1A
HVIN : 24GMMR1A
FVIN : NA

0010160511060091
S/N serial number :
0010160511060083
Frequency band : 24.05 - 24.25 GHz
Number of channels : 1
Antenna : Planar Patch
Power supply : 12 V DC from external power supply
Temperature range : -40 °C to +85 °C

5.1 Additional comments

Test setup- and EUT-photos are included in test report: 1-9177/15-28-01_AnnexA
1-9177/15-28-01_AnnexB

6 Test laboratories sub-contracted

None

Page 4 of 27
 Test report no.: 1-9177/15-28-03-B

7 Description of the test setup

Typically, the calibrations of the test apparatus are commissioned to and performed by an accredited calibration
laboratory. The calibration intervals are determined in accordance with the DIN EN ISO/IEC 17025. In addition
to the external calibrations, the laboratory executes comparison measurements with other calibrated test
systems or effective verifications. Weekly chamber inspections and range calibrations are performed. Where
possible, rf-generating and signaling equipment as well as measuring receivers and analyzers are connected to
an external high-precision 10 MHz reference (GPS-based or rubidium frequency standard).

In order to simplify the identification of the equipment used at some special tests, some items of test equipment
and ancillaries can be provided with an identifier or number in the equipment list below (Lab/Item).

Agenda: Kind of Calibration

k calibration / calibrated EK limited calibration

ne not required (k, ev, izw, zw not required) zw cyclical maintenance (external cyclical maintenance)
ev periodic self verification izw internal cyclical maintenance
Ve long-term stability recognized g blocked for accredited testing
vlkI! Attention: extended calibration interval
NK! Attention: not calibrated *) next calibration ordered / currently in progress

Page 5 of 27
 Test report no.: 1-9177/15-28-03-B

7.1 Radiated measurements chamber F

The radiated measurements are performed in vertical and horizontal plane in the frequency range from 9 kHz to
1 GHz in semi-anechoic chambers. The EUT is positioned on a non-conductive support with a height of 0.80 m
above a conductive ground plane that covers the whole chamber. The receiving antennas are confirmed with
specifications ANSI C63. These antennas can be moved over the height range between 1.0 m and 4.0 m in
order to search for maximum field strength emitted from EUT. The measurement distances between EUT and
receiving antennas are indicated in the test setups for the various frequency ranges. For each measurement,
the EUT is rotated in all three axes until the maximum field strength is received. The wanted and unwanted
emissions are received by spectrum analysers where the detector modes and resolution bandwidths over
various frequency ranges are set according to requirement ANSI C63.

Equipment table:

Lab / INV. No Kind of Last Next

No. Equipment Type Manufact. Serial No.
Item Cetecom Calibration Calibration Calibration
1 EMI Test Receiver ESCI 3 R&S 100083 300003312 k 27.01.2016 26.01.2017
2 Antenna Tower Model 2175 ETS-Lindgren 64762 300003745 izw -/- -/-
Positioning
3 Model 2090 ETS-Lindgren 64672 300003746 izw -/- -/-
Controller
Turntable Interface-
4 Model 105637 ETS-Lindgren 44583 300003747 izw -/- -/-
Box
TRILOG Broadband
5 Test-Antenna 30 VULB9163 Schwarzbeck 295 300003787 k 22.04.2014 22.04.2016
MHz - 3 GHz

Page 6 of 27
 Test report no.: 1-9177/15-28-03-B

7.2 Radiated measurements chamber A

Equipment table:

Lab / INV. No Kind of Last Next

No. Equipment Type Manufact. Serial No.
Item Cetecom Calibration Calibration Calibration
1 n. a. Power Supply 0-20V 6632A HP 2851A01814 300000924 ne 09.11.2005 -/-
Double-Ridged
2 n. a. Waveguide Horn 3115 EMCO 9709-5290 300000212 k 13.08.2015 13.08.2017
Antenna 1-18.0GHz
Software Option für
3 n. a. CMU-Kxx R&S 9709-5290 300003345 ne -/- -/-
CMU 200
EMI Test Receiver
4 n. a. ESR26 R&S 101376 300005063 k 04.09.2015 04.09.2016
9kHz-26,5GHz
TRILOG Broadband
5 n. a. Test-Antenna 30 VULB9163 Schwarzbeck 318 300003696 k 22.04.2014 22.04.2017
MHz - 3 GHz
Broadband Amplifier
6 n. a. CBLU5184540 CERNEX 22050 300004482 ev -/- -/-
0.5-18 GHz
4U RF Switch
7 n. a. L4491A Agilent Technologies MY50000032 300004510 ne -/- -/-
Platform
Intel Core i3
Messrechner und 2V2403033A54
8 n. a. 3220/3,3 GHz, Agilent Technologies 300004591 ne -/- -/-
Monitor 21
Prozessor
NEXIO EMV- 2V2403033A54
9 n. a. BAT EMC EMCO 300004682 ne -/- -/-
Software 21

Page 7 of 27
 Test report no.: 1-9177/15-28-03-B

7.3 Radiated measurements 12 GHz to 50 GHz

Test set-up for the measurement of spurious radiation in the frequency range 12 GHz to 50 GHz:

Power Amplifier Cable Spectrum

supply EUT d analyzer

SGH Standard
gain horn

a (fs) g a (c)
g(amp)

Equipment table:

Lab / INV. No Kind of Last Next

No. Equipment Type Manufact. Serial No.
Item Cetecom Calibration Calibration Calibration
Std. Gain Horn
1 CR 79 Antenna 26.5-40.0 V637 Narda 7911 300001751 ne -/- -/-
GHz
Std. Gain Horn
2 A023 Antenna 39.3-59.7 2424-20 Flann 75 300001979 ne -/- -/-
GHz
Temperature and
3 A023 Climatic Test VUK04/500 Heraeus Voetsch 32678 300000297 ev 03.09.2015 03.09.2017
Chamber
Std. Gain Horn
4 A026 Antenna 12.4 to 18.0 639 Narda 8402 300000787 k 14.08.2015 14.08.2017
GHz
Std. Gain Horn
5 A029 Antenna 18.0 to 26.5 638 Narda 8205 300002442 NK! 19.07.2013 -/-
GHz
6 A029 Power Supply LA30/5GA Zentro 2046 300000711 NK! -/- -/-
Spectrum Analyzer
7 A029 FSU50 R&S 200012 300003443 Ve 02.10.2014 02.10.2016
20 Hz - 50 GHz
Broadband LNA 18-
8 A029 CBL18503070PN CERNEX 25240 300004948 ev -/- -/-
50 GHz

Page 8 of 27
 Test report no.: 1-9177/15-28-03-B

7.4 Radiated measurements above 50 GHz

Test set-up for the measurement of spurious radiation and EIRP in the frequency range
50 GHz to 325 GHz:

Power Cable Spectrum

supply EUT d Mixer analyzer

SGH Standard
gain horn

a (fs) g

Equipment table:

Lab / INV. No Kind of Last Next

No. Equipment Type Manufact. Serial No.
Item Cetecom Calibration Calibration Calibration
Std. Gain Horn
1 A025 Antenna 49.9-75.8 2524-20 Flann * 300001983 ne -/- -/-
GHz
Std. Gain Horn
2 A028 Antenna 73.8-112 2724-20 Flann * 300001991 ne -/- -/-
GHz
Harmonic Mixer 2-
3 A028 FS-Z75 R&S 100099 300003949 k 06.03.2015 06.03.2016
Port, 50-75 GHz
Harmonic Mixer 3-
4 A028 FS-Z110 R&S 101411 300004959 k 04.05.2015 04.05.2016
Port, 75-110 GHz

Page 9 of 27
 Test report no.: 1-9177/15-28-03-B

8 Summary of measurement results

No deviations from the technical specifications were ascertained

There were deviations from the technical specifications ascertained

TC Identifier Description Verdict Date Remark

FCC 47 CFR Part 15
RF-Testing see below 2016-03-21 -/-
RSS-310

Test
Temperature Power Results
specification Test case Pass Fail NA NP
conditions supply (max.)
clause
§15.203
Antenna Requirement Nominal Nominal complies
RSS-Gen 7.1.4

Field strength of PK: 93.7 dBµV/m

§15.249(a), (c)
emissions Nominal Nominal AVG: 93.0 dBµV/m
RSS-310, 3.10
(wanted signal) @ 3m

ANSI C63.4 Occupied bandwidth

26dB: 72.25 MHz
§ 13.1.7 (26dB Bandwidth and Nominal Nominal
99%: 97.25 MHz
RSS-GEN 4.6.1 99% Bandwidth)

§15.249(a), (d) Field strength of

§15.209 emissions Nominal Nominal complies
RSS-GEN 4.9 (spurious & harmonics)

§1.1310
§2.1091
FCC OET
Bulletin 65 MPE Calculation Nominal Nominal 0.00013 mW/cm2
§15.319 (i)
RSS-GEN 5.5
RSS 102

Nominal Nominal
§15.249 (b) (2) Frequency Stability and and complies
Extreme Extreme

Note: NA = Not Applicable; NP = Not Performed

Page 10 of 27
 Test report no.: 1-9177/15-28-03-B

9 Measurement results

9.1 Antenna Requirement

An intentional radiator shall be designed to ensure that no antenna other than that furnished by the responsible
party shall be used with the device. The use of a permanently attached antenna or of an antenna that uses a
unique coupling to the intentional radiator shall be considered sufficient to comply with the provisions of this
section.

Limits:

FCC / IC
47 CFR Part 15.203 / RSS-GEN 7.1.4

Result: The measurement is passed.

Page 11 of 27
 Test report no.: 1-9177/15-28-03-B

9.2 Field strength of emissions (wanted signal)

Description:

Measurement of the maximum radiated field strength of the wanted signal.

Measurement:

Measurement parameter
Detector: Pos-Peak / Average
Sweep time: 5s
Video bandwidth: 3 MHz
Resolution bandwidth: 1 MHz (6 dB Bandwidth)
Span: 300 MHz
Trace-Mode: Max Hold

Limits:

FCC / IC

47 CFR Part 15.249(a), (c) / RSS-310, 3.10

Field strength of emissions

The field strength of emissions from intentional radiators operated within these frequency bands shall
comply with the following:
Frequency Field Strength
Measurement distance
[ GHz ] [ dBµV/m ]
24.00 – 24.25 108 3

(e) As shown in § 15.35(b), for frequencies above 1000 MHz, the field strength limits in paragraphs (a) and (b)
of this section are based on average limits. However, the peak field strength of any emission shall not exceed
the maximum permitted average limits specified above by more than 20 dB under any condition of modulation.

Page 12 of 27
 Test report no.: 1-9177/15-28-03-B

Measurement results:

Peak-Measurement:
Maximum field strength
Test condition Frequency (Peak)
Tnom / Vnom [ GHz ] measured values
[dBµV/m] @ 3 m

normal operation mode 24.124 93.7

Measurement uncertainty ± 3 dB

Average-Measurement:
Maximum field strength
Test condition Frequency (AVG)
Tnom / Vnom [ GHz ] measured values
[dBµV/m] @ 3 m

normal operation mode 24.124 93.0

Measurement uncertainty 3 dB

Result: The measurement is passed.

Page 13 of 27
 Test report no.: 1-9177/15-28-03-B

Plot No. 1: Peak measurement, normal operation mode

* RBW 1 MHz Marker 1 [T1 ]

* VBW 3 MHz 93.67 dBµV
Ref 113.9 dBµV * Att 0 dB * SWT 5 s 24.124000000 GHz

Offset 1.9 dB
110

100
1 PK
1
MAXH
LVL
90

80

70

60
3DB

50

40

30

20

Start 24 GHz 25 MHz/ Stop 24.25 GHz

Date: 12.FEB.2016 12:11:49

Plot No. 2: Average measurement, normal operation mode

* RBW 1 MHz Marker 1 [T1 ]

* VBW 3 MHz 92.98 dBµV
Ref 113.9 dBµV * Att 0 dB * SWT 5 s 24.124000000 GHz

Offset 1.9 dB
110

100
1 RM *
1
MAXH
LVL
90

80

70

60
3DB

50

40

30

20

Start 24 GHz 25 MHz/ Stop 24.25 GHz

Date: 12.FEB.2016 12:12:14

Page 14 of 27
 Test report no.: 1-9177/15-28-03-B

9.3 Occupied bandwidth (26 dB bandwidth and 99% bandwidth)

Description:

99% bandwidth:
When an occupied bandwidth value is not specified in the applicable RSS, the transmitted signal bandwidth to
be reported is the 99% emissions bandwidth, as calculated or measured.

26 dB bandwidth:
The occupied bandwidth measurements on an intentional radiator shall be made in accordance with the
requirements outlined in ANSI C63.4-2009, Section 13.7. If no bandwidth requirement is specified by the
procuring or regulatory agency, measure the bandwidth at –26 dB with respect to the reference level. The
resolution bandwidth was set according to Table 5 in section 13.7 of ANSI C63.4-2009.

Measurement:

Measurement parameter
Detector: Peak
Sweep time: 5s
Video bandwidth: 1 MHz
Resolution bandwidth: 3 MHz
Span: 250 MHz
Trace-Mode: Max Hold

Limits:

FCC / IC

ANSI C63.10 § 6.9 / RSS-GEN 4.6.1

Measurement results:

Test condition 26 dB bandwidth 99% bandwidth

Tnom / Vnom [MHz] [MHz]

normal operation mode

72.25 97.25
[24.15 GHz ]
Measurement uncertainty ± span/1000

Result: The measurement is passed.

Page 15 of 27
 Test report no.: 1-9177/15-28-03-B

Plot No. 3: Peak measurement, 99%

* RBW 1 MHz Marker 1 [T1 ]

* VBW 3 MHz 93.67 dBµV
Ref 113.9 dBµV * Att 0 dB * SWT 5 s 24.124000000 GHz

Offset 1.9 dB OBW 97.250000000 MHz

110
Temp 1 [T1 OBW]
66.25 dBµV A
24.077000000 GHz
100
1 PK Temp 2 [T1 OBW]
1
MAXH
64.64 dBµV
LVL
90 24.174250000 GHz

80

70 T1
T2

60
3DB

50

40

30

20

Start 24 GHz 25 MHz/ Stop 24.25 GHz

Date: 12.FEB.2016 12:13:17

Plot No. 4: Peak measurement, 26 dB down

* RBW 1 MHz Marker 1 [T1 ]

* VBW 3 MHz 93.20 dBµV
Ref 113.9 dBµV * Att 0 dB * SWT 5 s 24.123500000 GHz

Offset 1.9 dB ndB [T1] 26.00 dB

110
BW 72.250000000 MHz
Temp 1 [T1 ndB] A
67.20 dBµV
100
1 RM * 24.088750000 GHz
1
MAXH
Temp 2 [T1 ndB]
LVL
90 67.21 dBµV
24.161000000 GHz

80

70 T1 T2

60
3DB

50

40

30

20

Start 24 GHz 25 MHz/ Stop 24.25 GHz

Date: 12.FEB.2016 12:16:10

Page 16 of 27
 Test report no.: 1-9177/15-28-03-B

9.4 Field strength of emissions (radiated spurious and harmonics)

Description:

Measurement of the radiated spurious emissions in transmit mode.

Measurement:

Measurement parameter
F < 1 GHz: Quasi Peak
Detector:
F > 1 GHz: Average
Sweep time: Auto

Video bandwidth: Auto

F < 1 GHz: 100 kHz

Resolution bandwidth:
F > 1 GHz: 1 MHz
Frequency range: 30 MHz to 100 GHz
Trace-Mode: Max Hold

Limits:

FCC / IC

CFR Part 15.249 (a), (d); CFR Part 15.209 / RSS-GEN 4.9

Field Strength of harmonics shall not exceed 68 dBµV/m

Radiated Spurious Emissions

Emissions radiated outside of the specified frequency bands, except for harmonics, shall be attenuated by
at least 50 dB below the level of the fundamental or to the general radiated emission limits in § 15.209,
whichever is the lesser attenuation.

Frequency (MHz) Field Strength (dBµV/m) Measurement distance

0.009 – 0.490 2400/F(kHz) 300

0.490 – 1.705 24000/F(kHz) 30

1.705 – 30.0 30 30

30 88 30.0 10

88 – 216 33.5 10

216 – 960 36.0 10

Above 960 54.0 3

Page 17 of 27
 Test report no.: 1-9177/15-28-03-B

Measurement results:

< 1 GHz:
Frequency QuasiPeak Limit Margin Meas. Bandwidth Height Pol Azimuth Corr.
(MHz) (dBµV/m) (dBµV/m) (dB) Time (kHz) (cm) (deg) (dB)
(ms)
44.478450 10.63 30.00 19.37 1000.0 120.000 101.0 V 195.0 13.9
139.080750 14.92 33.50 18.58 1000.0 120.000 98.0 V 245.0 8.8
145.722750 14.98 33.50 18.52 1000.0 120.000 101.0 V 320.0 8.8
528.912900 16.21 36.00 19.79 1000.0 120.000 170.0 V 187.0 19.1
655.572900 18.56 36.00 17.44 1000.0 120.000 98.0 H 352.0 21.2
919.999050 21.54 36.00 14.46 1000.0 120.000 170.0 V 168.0 24.2

>1 GHz
TX Spurious Emissions Radiated [dBµV/m]

-/- Middle -/-

Level Level Level
F [GHz] Detector F [GHz] Detector F [GHz] Detector
[dBµV/m] [dBµV/m] [dBµV/m]
12.53050 peak 29.0
24.00000 peak 41.8
24.25000 peak 44.6
48.25000 peak 61.1*

Measurement uncertainty ± 3 dB
Note: Peak detector is used for detection of spurious >1GHz, only critical peaks are remeasured with average
detector.
*marker shows 2nd harmonic of carrier // Limit: 68 dBµV/m

Result: The measurement is passed.

Page 18 of 27
 Test report no.: 1-9177/15-28-03-B

Plot No. 5: 9 kHz – 30 MHz, magnetic loop antenna, low/mid/high frequency

130
dBµV/m
120

110

100

90

80

70

60

50

40

30

20

10

0
9kHz 100k 1M 10M 30MHz
Frequency

Plot No. 6: 30 MHz to 1 GHz, horizontal/vertical polarization

80

70

60

50
Level in dBµV/m

F C C _ 1 0 m_ B

40

30

20

10

0
30M 50 60 80 100M 200 300 400 500 800 1 ,0 5 G
F re q u e n c y in H z

Page 19 of 27
 Test report no.: 1-9177/15-28-03-B

Plot No. 7: 1 GHz to 12 GHz, horizontal/vertical polarization

80
dBµV/m

70

60

50

40

30

20

10

0
1GHz 10G 12.75GHz
Frequency

Plot No. 8: 12 GHz to 18 GHz, horizontal/vertical polarization

Page 20 of 27
 Test report no.: 1-9177/15-28-03-B

Plot No. 9: 18 GHz to 24.05 GHz, horizontal / vertical polarization

* RBW 1 MHz Marker 1 [T1 ]

* VBW 3 MHz 41.82 dBµV
Ref 97.4 dBµV * Att 0 dB SWT 35 ms 24.000000000 GHz

Offset -5.2 dB

90
A

1 PK
80
MAXH
LVL

70

60

54DBUV

50

1
3DB
40

30

20

10

Start 18 GHz 600 MHz/ Stop 24 GHz

Date: 15.FEB.2016 13:30:06

Plot No. 10: 24.25 GHz to 26 GHz, horizontal / vertical polarization

* RBW 1 MHz Marker 1 [T1 ]

* VBW 3 MHz 44.63 dBµV
Ref 98.4 dBµV * Att 0 dB SWT 20 ms 24.250000000 GHz

Offset -4.2 dB

90 A

1 PK
MAXH 80
LVL

70

60

54DBUV

50
1

3DB
40

30

20

10

Start 24.25 GHz 225 MHz/ Stop 26.5 GHz

Date: 15.FEB.2016 13:28:48

Page 21 of 27
 Test report no.: 1-9177/15-28-03-B

Plot No. 11: 26 GHz to 40 GHz, horizontal / vertical polarization

* RBW 1 MHz Marker 1 [T1 ]

* VBW 3 MHz 33.07 dBµV
Ref 94.2 dBµV * Att 0 dB SWT 80 ms 34.789000000 GHz

Offset -8.4 dB
90

80
1 PK
MAXH
LVL
70

60

54DBUV

50

40
3DB
1

30

20

10

Start 26.5 GHz 1.35 GHz/ Stop 40 GHz

Date: 15.FEB.2016 13:24:16

Plot No. 12: 40 GHz to 50 GHz, horizontal / vertical polarization

* RBW 1 MHz Marker 1 [T1 ]

* VBW 3 MHz 61.13 dBµV
Ref 93.3 dBµV * Att 0 dB SWT 60 ms 48.250000000 GHz

Offset -9.3 dB
90

80
1 PK
MAXH
LVL
70

60

54DBUV

50

40
3DB

30

20

10

Start 40 GHz 1 GHz/ Stop 50 GHz

Date: 15.FEB.2016 13:21:44

Note: Limit for harmonics: 68 dBµV/m

Page 22 of 27
 Test report no.: 1-9177/15-28-03-B

Plot No. 13: 50 GHz to 75 GHz, horizontal / vertical polarization

* RBW 100 kHz Marker 1 [T1 ]

* VBW 3 MHz 43.94 dBµV
Ref 102.2 dBµV EXTM IX V SWT 2.5 s 72.395833333 GHz

100 Offset 22.5 dB

A
90
1 RM *
MAXH
80 LVL

70

60

54DBUV

50
1
3DB

40

30

20

10

Center 62.5 GHz 2.5 GHz/ Span 25 GHz

Date: 22.FEB.2016 18:02:12

Plot No. 14: 75 GHz to 110 GHz, horizontal / vertical polarization

* RBW 100 kHz Marker 1 [T1 ]

* VBW 3 MHz 40.64 dBµV
Ref 101.7 dBµV EXTM IX W SWT 3.5 s 92.556089744 GHz

100 Offset 22 dB

A
90

1 RM *
CLRWR
80 LVL

70

60

54DBUV

50

3DB
1
40

30

20

10

Center 92.5 GHz 3.5 GHz/ Span 35 GHz

Date: 22.FEB.2016 18:06:21

Page 23 of 27
 Test report no.: 1-9177/15-28-03-B

10 Maximum Permissible Exposure (MPE)

MPE Calculation:

Note: OP [mW], AG as lin.factor

§ 1.1310 Radiofrequency radiation exposure limits.

The criteria listed in table 1 shall be used to evaluate the environmental impact of human exposure to
radiofrequency (RF) radiation as specified in § 1.1307(b), except in the case of portable devices which shall be
evaluated according to the provisions of § 2.1093 of this chapter. Further information on evaluating compliance
with these limits can be found in the FCC’s OST/OET Bulletin Number 65, ‘‘Evaluating Compliance with FCC-
Specified Guidelines for Human Exposure to Radiofrequency Radiation.’’

NOTE TO INTRODUCTORY PARAGRAPH: These limits are generally based on recommended exposure
guidelines published by the National Council on Radiation Protection and Measurements (NCRP) in ‘‘Biological
Effects and Exposure Criteria for Radiofrequency Electromagnetic Fields,’’ NCRP Report No. 86, Sections
17.4.1, 17.4.1.1, 17.4.2 and 17.4.3.
Copyright NCRP, 1986, Bethesda, Maryland 20814. In the frequency range from 100 MHz to 1500 MHz,
exposure limits for field strength and power density are also generally based on guidelines recommended by the
American National Standards Institute (ANSI) in Section 4.1 of ‘‘IEEE Standard for Safety Levels with Respect
to Human Exposure to Radio Frequency Electromagnetic Fields, 3 kHz to 300 GHz,’’ ANSI/IEEE C95.1–1992,
Copyright 1992 by the Institute of Electrical and Electronics Engineers, Inc., New York, New York 10017.

[61 FR 41016, Aug. 7, 1996]

Page 24 of 27
 Test report no.: 1-9177/15-28-03-B

Results:

Refer to 5.2, the maximum peak field strength is 93.7 dBµV/m ≙ -1.7 dBm ≙ 0.68 mW

d = 20 cm

 PD = 0.00013 mW/cm2

Limits: FCC §1.1310 (B) / RSS-GEN 5.5; RSS 102

Frequency [GHz] Power Density [mW/cm2]

1.500 GHz – 100.000 GHz 1 mW / cm2

Result: The measurement is passed.

Page 25 of 27
 Test report no.: 1-9177/15-28-03-B

Annex A Document histo r y

Version Applied changes Date of release

1.0 Initial release 2016-02-24

Frequencies corrected from 24.138 GHz to 24.124 GHz
-A 2016-03-02
Value for span corrected from 300 MHz to 250 MHz (p. 15)
-B IC ID removed, note for 2nd harmonic added 2016-03-21

Annex B Further information

Glossary

AVG - Average
DUT - Device under test
EMC - Electromagnetic Compatibility
EN - European Standard
EUT - Equipment under test
ETSI - European Telecommunications Standard Institute
FCC - Federal Communication Commission
FCC ID - Company Identifier at FCC
HW - Hardware
IC - Industry Canada
Inv. No. - Inventory number
N/A - Not applicable
PP - Positive peak
QP - Quasi peak
S/N - Serial number
SW - Software

Page 26 of 27
 Test report no.: 1-9177/15-28-03-B

Annex C Accreditation Certificate

Front side of certificate Back side of certificate

Note:

The current certificate including may be received from CETECOM ICT Services on request.

Page 27 of 27