TDA1771

VERTICAL DEFLECTION CIRCUIT

.. RAMP GENERATOR

.. INDEPENDENT AMPLITUDE ADJUSTEMENT

BUFFER STAGE

.. POWER AMPLIFIER
FLYBACK GENERATOR

. INTERNAL REFERENCE VOLTAGE

THERMAL PROTECTION
SIP10
(Plastic Package)

ORDER CODE : TDA1771

PIN CONNECTIONS (top view)

10 FLYBACK GENERATOR
9 VS
8 INVERTING INPUT
DESCRIPTION 7 BUFFER OUTPUT
6 RAMP GENERATOR
The TDA1771 is a monolithic integrated circuit in 5 GROUND
SIP10 package. 4 HEIGHT ADJUSTMENT
It is a full performance and very efficient vertical 3 TRIGGER INPUT
2 OUTPUT STAGE V S
deflection circuit intended for direct drive of a TV

1771-01.EPS
1 POWER OUTPUT
picture tube in Color and B & W television as well
as in Monitor and Data displays.

BLOCK DIAGRAM

9 2

VOLTAGE FLYBACK
10
REGULATOR GENERATOR

R3

TRIGGER IN 3 RAMP CLOCK POWER

1
GENERATOR PULSE AMP.

BUFFER THERMAL
STAGE PROTECTION
1771-02.EPS

4 6 7 8 5

September 1993 1/4

TDA1771

ABSOLUTE MAXIMUM RATINGS

Symbol Parameter Value Unit
VS Supply Voltage 30 V
V1 , V2 Flyback Peak Voltage 65 V
V3 Trigger Input Voltage 20 V
V8 Amplifier Input Voltage GND to VS V
I0 Output Peak to Peak Current (non repetitive t = 2ms) 6 A
I0 Output Peak to Peak Current t > 10µs 4 A
I10 Pin 10 DC Current at V1 < V9 100 mA
I10 Pin 10 Peak to Peak Current @ tfly < 1.5ms 3 A

1771-01.TBL
Ptot Total Power Dissipation @ Ttab = 60°C 9 W
TS , T J Storage and Junction Temperature – 40, + 150 °C

THERMAL DATA
Symbol Parameter Value Unit

1771-02.TBL
Rth (j-tab) Thermal Resistance Junction-tab Max. 10 °C/W
Rth (j-a) Thermal Resistance Junction-ambient Max. 70 °C/W

ELECTRICAL CHARACTERISTICS (Tamb = 25°C unless otherwise specified)

Symbol Parameter Test Conditions Min. Typ. Max. Unit
DC (VS = 30V)
I2 Pin 2 Quiescent Current I1 = 0, I10 = 0 16 36 mA
I9 Pin 9 Quiescent Current I1 = 0, I10 = 0 15 30 mA
– I6 Ramp Generator Bias Current V6 = 0 0.5 µA
– I6 Ramp Generator Current V6 = 0, – I4 = 20µA 18.5 20 21.5 µA
dI6/I6 Ramp Gener. Linearity V6 = 0 to 15V, – I4 = 20µA 0.2 1 %
V1 Quiescent Output Voltage Ra = 30kΩ, Rb = 10kΩ, VS = 30V 17.0 17.8 18.6 V
Ra = 6.8kΩ, Rb = 10kΩ, VS = 15V 7.2 7.5 7.8 V
V1L Out Saturation Voltage to GND I1 = 0.5A 0.5 1 V
I1 = 1.2A 1 1.4 V
V1H Out Saturation Voltage to VS – I1 = 0.5A 1.1 1.6 V
– I1 = 1.2A 1.6 2.2 V
V4 Reference Voltage – I4 = 20µA 6.3 6.6 6.9 V
dV4/VS Reference Voltage Drift Versus VS VS = 10V to 30V 1 2 mV/V
dV4/dI 4 Reference Voltage Drift Versus I4 I4 = 10µA to 30µA 1.5 2 mV/µA
Vr Internal Ref. Voltage 4.26 4.40 4.54 V
Gv Ouput Stage Open Loop Gain f = 100Hz 60 dB
Vfs V9 – 10 Saturation Voltage – I10 = 1.2A 1.5 2.5 V
V10 Pin 10 Scanning Voltage I10 = 20mA 1.7 3 V
V3 Trigger Input Threshold (see note 1) 2.6 3.0 3.4 V
1171-03.TBL

I3 Trigger Input Bias Current VIN = V3 – 0.2V 30 µA

t3 Trigger Input Width (see note 2) 20 60 th µS
Notes : 1. The trigger input circuit can accept, with a metal option, positive and negative going input pulses.
1.2 ⋅ tS
2. th = where tS is the vertical period and VPP is ramp amplitude at Pin 6
VPP

2/4
 TDA1771

ELECTRICAL CHARACTERISTICS (Tamb = 25°C unless otherwise specified) (continued)

Symbol Parameter Test Conditions Min. Typ. Max. Unit
DC (VS = 24V)
VS Operating Supply Voltage Range 10 30 V
I1 Peak-to-peak Operating Current Range 0.4 2.5 A
IS Supply Current IY = 2.4App 315 mA
V1 Flyback Voltage IY = 2.4App 51 V

1771-04.TBL
V7 Sawtooh Pedestall Voltage 1.85 V
TJS Junction Temp. for Thermal Shutdown 145 °C

APPLICATION CIRCUIT

+VS
0.1µF 470µF 1N4001

9 2
100µF
35V
VOLTAGE FLYBACK
10
REGULATOR GENERATOR

R3

TRIGGER IN 3 RAMP CLOCK POWER

1
GENERATOR PULSE AMP.

2.2Ω
Ry = 9.6Ω
330Ω YOKE Ly = 24.6mH
BUFFER THERMAL 0.22µF Iy = 1.2App
STAGE PROTECTION
2.4kΩ

4 6 7 8 5
1.2kΩ 1kΩ 1500µF
47nF
180kΩ
22µF

220kΩ
1.2Ω
1771-03.EPS

3/4
TDA1771

PACKAGE MECHANICAL DATA

10 PINS - PLASTIC SIP
C
D
c2

L3
L1
N

d1
M

A
L2
a1

1 10
L

b1

PM-SIP10.EPS
b3 e c1
e3
B

Millimeters Inches
Dimensions
Min. Typ. Max. Min. Typ. Max.
A 7.1 0.280
a1 2.7 3 0.106 0.118
B 24.8 0.976
b1 0.5 0.020
b3 0.85 1.6 0.033 0.063
C 3.3 0.130
c1 0.43 0.017
c2 1.32 0.052
D 23.7 0.933
d1 14.5 0.571
e 2.54 0.100
e3 22.86 0.900
L 3.1 0.122
L1 3 0.118
L2 17.6 0.693
L3 0.25 0.010
SIP10.TBL

M 3.2 0.126
N 1 0.039

Information furnished is believed to be accurate and reliable. However, SGS-THOMSON Microelectronics assumes no responsibility
for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may result
from its use. No licence is granted by implication or otherwise under any patent or patent rights of SGS-THOMSON Microelectronics.
Specifications mentioned in this publication are subject to change without notice. This publication supersedes and replaces all
information previously supplied. SGS-THOMSON Microelectronics products are not authorized for use as critical components in life
support devices or systems without express written approval of SGS-THOMSON Microelectronics.

© 1994 SGS-THOMSON Microelectronics - All Rights Reserved

Purchase of I2C Components of SGS-THOMSON Microelectronics, conveys a license under the Philips
I2C Patent. Rights to use these components in a I2C system, is granted provided that the system conforms to
the I2C Standard Specifications as defined by Philips.

SGS-THOMSON Microelectronics GROUP OF COMPANIES

Australia - Brazil - China - France - Germany - Hong Kong - Italy - Japan - Korea - Malaysia - Malta - Morocco
The Netherlands - Singapore - Spain - Sweden - Switzerland - Taiwan - Thailand - United Kingdom - U.S.A.

4/4
This datasheet has been download from:

www.datasheetcatalog.com

Datasheets for electronics components.