0% found this document useful (0 votes)
97 views3 pages

Test Method Acceptance Criteria

The document provides a test procedure and results for a liquid bottle capper machine. The test was conducted 3 times to check that bottles were correctly capped. Each test checked for cap damage, proper tightening, ability to open the cap while breaking the seal, and ability to retighten the cap. The results for 12 heads are shown with no failures reported. The overall test outcome was a pass.

Uploaded by

Ahmed Raza
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
97 views3 pages

Test Method Acceptance Criteria

The document provides a test procedure and results for a liquid bottle capper machine. The test was conducted 3 times to check that bottles were correctly capped. Each test checked for cap damage, proper tightening, ability to open the cap while breaking the seal, and ability to retighten the cap. The results for 12 heads are shown with no failures reported. The overall test outcome was a pass.

Uploaded by

Ahmed Raza
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

Title: Performance - Operation – (Liquid Bottle Capper) Reference: 0174

Objective:
1 To provide documented evidence that liquid Capper performs to the design capping accuracy.
Pre-requisites: None
Method:
1 With the machine operating normally at maximum speed (____ units/min), set the machines all head to cap bottles. Perform a Cap check to confirm
actual condition of cap on bottle. Record details accordingly.
Acceptance Criteria (Must be Performed 3 Times):
1 All bottles must be correctly capped.
Results:

Test Visually inspect the cap for damages Check the tightening of the cap Check the opening of the Check whether the cap can
Method on the bottle. bottle. be re-tightened on bottle.
Acceptance There must not be any damage in the cap The cap must be tightened Open the cap from the bottle Re-tightened the cap on the
Criteria physically. correctly on the bottle and must and it should open in correct bottle and cap must be re-
not be damaged physically. in manner that sealed must tightened easily and correctly
break
Head 01

Head 02

Head 03

Head 04
Head 05

Head 06

Head 07

Head 08

Head 09

Head 10

Head 11

Head 12
Comments/Deviations/Supporting Documentation:

Test Equipment Reference:


Overall Test Outcome (PASS/FAIL): Tested By (Signature): Date (dd/mmm/yy):

You might also like