Data Sheet

Cisco ASR 900 Series Aggregation Services

Routers
Cisco® ASR 900 Series Aggregation Services routers are full-featured, modular
aggregation platforms. They’re designed for the cost-effective delivery of converged
mobile, residential, and business services. You get redundancy, a shallow depth, low
power consumption, and high service scale in routers packed with useful features and
optimized for small aggregation and remote point-of-presence (POP) applications.

The Cisco ASR 902 Router and Cisco ASR 903 Router (Figure 1) provide a comprehensive and scalable feature
set of Layer 2 VPN (L2VPN) and Layer 3 VPN (L3VPN) services in compact designs.

Figure 1. Cisco ASR 903 Router and ASR 902 Router

Major Applications
Broadband Aggregation
The modular Cisco ASR 900 Series router supports broadband aggregation for delivering “any-play” services
(voice, video, data, and mobility). Designed to support thousands of subscribers, the Cisco ASR 900 Series quality
of service (QoS) features allow the routers to scale to a large number of queues per device. Combined with a
highly granular, three-level hierarchical QoS algorithm, a large number of queues can result in a greatly enhanced
broadband user experience. This full-featured Layer 2 and Layer 3 router supports a variety of broadband
applications including IPTV and video on demand (VoD), enhancing and extending the Cisco Evolved
Programmable Network architecture.

Pre-aggregation for Mobile Applications

Deployed as a pre-aggregation platform for mobile backhaul, the Cisco ASR 900 Series router can aggregate cell
sites and use Multiprotocol Label Switching (MPLS) as a transport for Radio Access Network (RAN) backhaul
traffic. It also provides the timing services required in today’s converged access networks by offering integrated
support for the Building Integrated Timing Supply (BITS), 10 MHz, 1 Pulse Per Second (1PPS) and Time Of Day
(TOD) interfaces. The Cisco ASR 900 Series router also supports synchronous Ethernet (SyncE) and IEEE-1588,
and it can act as the source for network clocking for time-division multiplexing (TDM), Synchronous Digital
Hierarchy (SDH), Synchronous Optical Network (SONET), Synchronous Ethernet (SyncE), and Global Positioning
System (GPS) interfaces. In addition to the timing services, the Cisco ASR 900 Series router can be deployed in
small and rugged environments, due to its shallow depth and qualification for extended temperature ranges.

© 2014 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 1 of 8
 Metro Ethernet Aggregation
The Cisco ASR 900 Series router is built to meet service provider requirements for Carrier Ethernet aggregation. It
is optimized for remote central office and smaller aggregation sites where a full-featured, modular, small-footprint,
and fully redundant aggregation platform is needed. The Cisco ASR 900 Series router offers service flexibility and
delivers Layer 2, IP, and MPLS transport for advanced L2VPN, L3VPN, and multicast services.

Major Differentiators
The Cisco ASR 900 Series router helps service providers deliver advanced services for residential broadband,
mobile, and Metro Ethernet applications. This allows an operator to provide differentiated and cost-effective
services to end users.

Flexible Deployment Options

The Cisco ASR 900 Series router is designed with a compact form factor to accommodate deployment in small
spaces. Available with a range of mounting options, the router can be deployed in space-constrained locations
such as ETSI 300-mm deep cabinets. The side-to-side airflow design allows two Cisco ASR 900 Series routers to
be mounted back-to-back in a 600-mm cabinet, while the extended temperature range supported by the router
allows it to be deployed in locations with minimum environmental control. Small footprint and extended temperature
range support allow service providers to extend the reach of their Carrier Ethernet networks to more challenging
and remote locations and yet save money on air conditioning.

High Availability and Modularity

The Cisco ASR 900 Series router is a fully modular platform. Cisco offers a choice of multiple distinct route switch
processors (RSPs), AC and DC power supplies, a fan tray and a wide range of interface modules. The Ethernet
interfaces are available in copper and fiber, with speed ranging from 10 Mbps to 10 Gbps. The legacy interfaces
are available in speeds ranging from nxDS0 to OC-12/STM-4 for Plesiochronous Digital Hierarchy (PDH), SDH,
and SONET. The interface modules, power supplies, and fan tray are all field replaceable.

The design of the Cisco ASR 903 Router delivers in-box hardware redundancy and supports software redundancy
with In Service Software Upgrade (ISSU) support when a pair of route switch processors is inserted in the chassis.

Operational Efficiency
The Cisco ASR 900 Series router features essential capabilities that help service providers simplify and automate
the management of their networks, promoting efficiency gains in the deployment and operation of the networks.
The Cisco ASR 900 Series router provides proactive diagnostic tools including Generic On-Line Diagnostics
(GOLD) which will help service providers avoid potential problems before they occur, troubleshoot any problems,
and when these are diagnosed, implement solutions.

System Design
The Cisco ASR 900 Series routers are built as fully modular systems, with a future-ready design. The Cisco ASR
903 Router chassis supports online field replacement and upgrades of all components. The chassis is designed to
contain one fan tray, two power supplies, two Route Switch Processor (RSP) cards, and up to six interface module
cards. The Cisco ASR 902 Router uses the same design as the Cisco ASR 903 Router, but due to its smaller size,
it has four interface module cards and one RSP card. All components support online replacement and field
upgrades, with the exception of the RSP card, which requires the system to be brought down for a replacement or
upgrade.

© 2014 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 2 of 8
 Fan Tray
Cisco ASR 900 Series routers have a single fan tray slot, which must be populated for the system to operate. The
fan tray contains an optional field serviceable dust filter and redundant fans. The systems will continue to operate
on a single fan failure. The systems have been designed to remain operational during the replacement of the fan
tray. In addition to cooling the chassis, the fan tray also contains a connector for dry-contact inputs and several
system-level alarm LEDs.

Power Supply
Both an AC and a DC power supply are available for the Cisco ASR 900 Series routers. The system supports
operation on a single power supply, while two power supplies will both function in a load-share configuration.
Mixing of AC and DC power supplies in a single operational chassis is supported.

Route Switch Processor

The Cisco ASR 900 Route Switch Processor (RSP) is the centralized card in the system performing the data plane,
network timing, and control plane functions for the system.

One RSP slot is provided in the Cisco ASR 902 Router, while the Cisco ASR 903 router has two RSP slots. The
Cisco ASR 900 RSP is a field replaceable unit (FRU).

Interface Modules
Cisco ASR 900 Series routers have interface module slots. The Cisco ASR 902 Router contains four slots (slots 0
to 3), and the Cisco ASR 903 Router contains six slots (slots 0 to 5). These interface module slots support all of the
available interface modules. The supported combination of interface modules depends on the RSP used in the
system.

Software
The Cisco ASR 900 Series routers are supported in Cisco IOS® XE S Software, which is a modular operating
system. Cisco IOS XE Software is designed to provide modular packaging, feature velocity, and powerful
resiliency. For more information on the supported features and software capabilities, see the Cisco IOS XE
Software for Cisco ASR 900 Series Aggregation Services Router data sheet.

Network Management
Cisco ASR 900 Series routers are supported in Cisco Prime™ for Evolved Programmable Network architectures.
Cisco Prime for Evolved Programmable Networks is an end-to-end network management solution that drastically
simplifies the design, provisioning, and management of carrier-grade networks. It is a comprehensive solution that
centralizes and automates service design, fulfillment, assurance, and performance analysis to help service
providers and enterprises lower their costs while meeting high customer expectations.

Table 1 lists the hardware parts available for Cisco ASR 900 Series routers.

Table 1. Hardware Components for Cisco ASR 900 Series Routers

Part Number Description

ASR 902 System Components
ASR-902 ASR 902 Router Chassis

ASR-902= ASR 902 Router Chassis, Spare

A902-FAN-E ASR 902 Enhanced FAN Tray with FAN Filter Slot
A902-FAN-E= ASR 902 Enhanced FAN Tray with FAN Filter Slot, Spare

© 2014 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 3 of 8
 Part Number Description
A902-FAN-F ASR 902 FAN Tray Filter
A902-FAN-F= ASR 902 FAN Tray Filter, Spare
A902-FAN-F-B ASR 902 FAN Tray Filter Blank panel
A902-FAN-F-B= ASR 902 FAN Tray Filter Blank Panel, Spare
A902-CAB-BRACKET= ASR 902 Cable Guide Bracket, Spare
A902-RCKMNT-ETSI= ETSI Rack Mount Option for the Cisco ASR 902, Spare
A902-RCKMNT-19IN= EIA 19in Rack Mount Option for the Cisco ASR 902, Spare
ASR 903 System Components
ASR-903 ASR 903 Router Chassis
ASR-903= ASR 903 Router Chassis, Spare
A903-FAN ASR 903 FAN Tray
A903-FAN= ASR 903 FAN Tray, Spare

A903-FAN-E ASR 903 Enhanced FAN Tray with FAN Filter Slot
A903-FAN-E= ASR 903 Enhanced FAN Tray with FAN Filter Slot, Spare
A903-FAN-F ASR 903 FAN Tray Filter

A903-FAN-F= ASR 903 FAN Tray Filter, Spare

A903-FAN-F-B ASR 903 FAN Tray Filter Blank panel
A903-FAN-F-B= ASR 903 FAN Tray Filter Blank Panel, Spare

A903-RCKMNT-ETSI= ETSI Rack Mount Option for the Cisco ASR 903, Spare
A903-RCKMNT-19IN= EIA 19in Rack Mount Option for the Cisco ASR 903, Spare
A903-CAB-BRACKET= ASR 903 Cable Guide Bracket, Spare

ASR 900 Common Equipment

A900-PWR550-A ASR 900 550W AC Power Supply
A900-PWR550-A= ASR 900 550W AC Power Supply, Spare

A900-PWR550-D ASR 900 550W DC Power Supply

A900-PWR550-D= ASR 900 550W DC Power Supply, Spare
A900-PWR550-D-E ASR 900 550W DC Power Supply With Enhanced Power Connector

A900-PWR550-D-E= ASR 900 550W DC Power Supply With Enhanced Power Connector, Spare
A900-PWR-BLANK= ASR 900 Power Supply Blank Cover, Spare
A900-RSPA-BLANK= ASR 900 Route Switch Processor Type-A Blank Cover, Spare
A900-IMA-BLANK= ASR 900 Interface Module Type-A Blank Cover, Spare
A900-PWR-BLANK= ASR 900 Power Supply Blank Cover, Spare

© 2014 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 4 of 8
 Product Specifications
Tables 2 through 4 list the product, power, and environmental specifications for the Cisco ASR 900 Series Routers.
Table 5 provides safety and compliance information.

Table 2. Cisco ASR 900 Series Router System Specifications

Description Cisco ASR 902 Router Cisco ASR 903 Router

1
Physical specifications Height: 3.56 in. (90.424 mm) - 2RU Height: 5.22 in. (132.6 mm) - 3RU
Width: 17.44 in. (443 mm) Width: 17.44 in. (443 mm)
Depth: 9.22 in. (234.2 mm) Depth: 9.22 in. (234.2 mm)
Weight: Weight:
● 24.04 lb (10.9 kg) with one RSP, two DC power ● 34.17 lb (15.5 kg) with two RSPs, two DC power supplies,
supplies, and loaded with a typical combination of and loaded with a typical combination of interface
interface module cards module cards
● 9.48 lb (4.3 kg) for an empty chassis ● 11.2 lb (5.1kg) for an empty chassis

Rack mounts ETSI rack mount kit

19 in. rack mount kit
Interface modules 4 interface module slots 6 interface module slots

Route switch processors 1 RSP slot 2 RSP slots

Fan tray 1 fan tray with fan redundancy 1 fan tray with fan redundancy
2 dry contact input alarms on the fan tray 4 dry contact input alarms on the fan tray

Air flow Side-to-side airflow; inlet on the right side, outlet on the left side when looking from the front
Power supplies Up to 2 power supplies (AC or DC)
Modules operate in load share mode
System can operate on a single power supply and supports mixing of one AC and one DC power supplies in a single
chassis.
Chassis MTBF at 40ºC 900.000 hours 900.000 hours
Operating Temperature
Fan Tray MTBF at 40ºC 600.000 hours 600.000 hours
Operating Temperature

1
Measured from the front of the chassis (excluding handles from the power supply, fan tray, and interface modules installed in
the chassis)

Table 3. Power Specifications

Description Cisco ASR 900 Series Router

Power consumption Maximum input power 600W (including loss). This is equivalent to 2150 BTU per hr.
Typical input power is less then 400W
AC input voltage and Voltage range: 85V AC to 264V AC, nominal 115V AC to 230V AC
frequency Frequency Range: 47Hz to 63Hz, nominal 60Hz to 50Hz
AC Power Supply MTBF at 300.000 hours
40ºC Operating
Temperature
DC input voltage Voltage range: -19.2V DC to -72V DC, nominal -24V DC to -48V DC
DC Power Supply MTBF at 300.000 hours
40ºC Operating
Temperature

© 2014 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 5 of 8
 Table 4. Environmental Specifications

Description Cisco ASR 900 Series Router

Operating environment -40ºC to 65ºC operating temperature (DC operation)
and altitude1 -5ºC to 55ºC operating temperature (AC operation)2
0ºC to 40ºC operating temperature (AC operation)
-60m to 1800m operating altitude (for full operating temperature range)
Up to 4000m operating altitude (at up to +40ºC temperature)
Outside plant For an outside plant installation, it is required that the router be protected against airborne contaminants, dust,
moisture, insects, pests, corrosive gases, polluted air, or other reactive elements present in the outside air. To achieve
this level of protection, it is recommended that the unit be installed in a fully sealed enclosure. Examples of such
cabinets include IP65 cabinets with heat exchanger complying with Telecordia GR487
Relative humidity 5 to 95%, noncondensing
Acoustic noise3 Acoustic noise peak operation maximum 55 dBA sound pressure level, bystander position for rack mount products at
20ºC operation as measured by ISO 7779 NAIS noise measurement test standard
Acoustic noise peak operation compliant to the Network Equipment Building Standards (NEBS) GR-63-Core Issue 3
sound power level of 78dB at 27ºC operation as measured by the ANSI S12.10/ISO 7779 NAIS noise measurement
test standard

Storage environment Temperature: -40 to +85ºC altitude: 15,000 ft (4570m)

Seismic Zone 4

1
Optics used may limit the temperature range.
2
Not more than the following in a one-year period: 96 consecutive hours, or 360 hours total, or 15 occurrences.
3
The above are for normal (nonfailure) operation. When operating with a fan failure, the above may be exceeded.

Table 5. Safety and Compliance

Type Standards
Safety ● UL 60950-1, 2nd edition
● CAN/CSA C22.2 No. 60950-1-07 2nd edition
● IEC 60950-1, 2nd edition
● EN 60950-1, 2nd edition
● AS/NZS 60950.1:2003
Electromagnetic ● FCC CFR47 Part 15 Class A
Emissions compliance ● EN55022, class A
● CISPR22, class A
● ICES-003, class A
● EN 300 386, class A
● VCCI, class A
● KN22, class A
● EN61000-3-2 to EN61000-3-3
Immunity compliance ● EN 300 386
● EN 61000-6-1
● EN 50082-1
● CISPR24
● EN 55024
● KN 24
● EN 50121-4
● EN/KN 61000-4-2 to EN/KN 61000-4-6
● EN/KN 61000-4-8
● EN/KN 61000-4-11
Power substation system ● IEC-61850-3 (2002)
compliance1 ● IEEE1613 (2009)

© 2014 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 6 of 8
 Type Standards
NEBS2 ● GR-63-CORE Issue 3
● GR-1089-CORE Issue 5
● SR-3580 NEBS Level 3
ETSI ● ETS/EN 300 119 Part 4
● ETS/EN 300 019 - Storage: Class 1.2, Transportation: Class 2.3, In-Use/Operational: Class 3.2
● ETS/EN 300 753
Network synchronization ● ANSI T1.101
● GR-1244-CORE
● GR-253-CORE
● ITU-T G.703 clause 5
● ITU-T G.703 clause 9
● ITU-T G.781
● ITU-T G.813
● ITU-T G.823
● ITU-T G.824
● ITU-T G.8261/Y.1361
● ITU-T G.8262
● ITU-T G.8264
● IEEE1588-2008

1
Notable exception: Using external protection for 5kV surge compliance.
2
Notable exception: All cabling is provided through the front panel.

Warranty Information
Find warranty information on Cisco.com at the Product Warranties page.

Service and Support

Cisco offers a wide range of services programs to accelerate customer success. These innovative services programs
are delivered through a unique combination of people, processes, tools, and partners, promoting high levels of
customer satisfaction. Cisco Services help you protect your network investment, optimize network operations, and
prepare your network for new applications to extend network intelligence and the power of your business. For more
information about Cisco Services, refer to Cisco Technical Support Services or Cisco Advanced Services.

Cisco is committed to reducing your total cost of ownership. Cisco offers a portfolio of technical support services to
help ensure that Cisco products operate efficiently, remain highly available, and benefit from the most up-to-date
system software. The services and support programs described in Table 6 are available as part of the Cisco Carrier
Ethernet Switching Service and Support solution and are available directly from Cisco and through resellers.

Table 6. Service and Support

Advanced Services Features Benefits

Cisco Total Implementation Solutions (TIS), ● Project management ● Supplement existing staff
available directly from Cisco ● Site survey, configuration, and deployment ● Help ensure functions meet needs
Cisco Packaged TIS, available through ● Installation, text, and cutover ● Mitigate risk
resellers
● Training
● Major moves, adds, and changes
● Design review and product staging
Cisco SP Base Support and Service ● 24-hour access to software updates ● Facilitate proactive or expedited problem
Provider-Based Onsite Support, available ● Web access to technical repositories resolution
directly from Cisco ● Lower total cost of ownership by taking
● Telephone support through the Cisco
Cisco Packaged Service Provider- Based Technical Assistance Center (TAC) advantage of Cisco expertise and
Support, available through resellers knowledge
● Advance replacement of hardware parts
● Reduce network downtime

© 2014 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 7 of 8
Printed in USA C78-685686-03 07/14

© 2014 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 8 of 8