Compressive Strength of Brick: Exp No: Date: Aim

Download as doc, pdf, or txt
Download as doc, pdf, or txt
You are on page 1of 3

Compressive Strength of Brick

Exp No:
Date:

Aim:
To determine the compressive strength of Brick Sand.
To find the percentage of water absorbed by the Bricks.

Apparatus required:

1. Bricks
2. Weighing Machine
3. Compression testing machine
4. Metric scale

Formula:

1. Compressive Strength = Crushing Load (N/mm 2 )/Area

 W 2  W 1 
2. Percentage water absorbed =    100
 W 1 

Where,

W 1
= Weight of Brick before soaking in water

W 2
= Weight of brick after soaking in water

Procedure:

 Three different Brick blocks were taken and were weighed, then the bricks were
soaked in water for 30 minutes following which the bricks were weighed again.

 The brick blocks were kept in the compression testing machine and the reading
corresponding to the maximum load was noted.
Observation:

Crushing Compressive
S.No Brick Dimension W1 W2 % Water Load Strength
Absorbed (kN) (N/mm 2 )

1.

2.

Model Calculation:

Weight of Brick before soaking in water, W 1


=

Weight of brick after soaking in water, W 2


=

 W 2  W 1 
Percentage absorbed =    100 =
 W 1 

Compressive Strength = Crushing Load /Area =


Result:

Percentage water absorbed by:

1. Brick A =
2. Brick B =

The compressive strength of

1. Brick A =
2. Brick B =

You might also like