Short MODU Specs of Tam Dao 03

Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

Self Elevating Mobile Offshore Drilling Unit

Tam Dao 03
General Description Srorage Capacities

Design LeTourneau Super 116 E Liquid Mud 3512 bbls


Shipyard PETROVIETNAM MARINE SHIPYARD Base Oil 1061 bbls
ABS, A1 Self-Elevating Drilling Unit Brine 683 bbls
Classification
VR, *VHR[1] SELF-ELEVATING MODU Drill Water 18000 bbls
Hull DImensions 305,27 ft x 206 ft x 26 ft Potable Water 2057 bbls
Legs (3) 477.47 ft Fuel 3083 bbls
Leg spacing 142 ft transverse / 129 ft longitudinal Bulk Material (6 silos) 8334 cu.ft
Spudcan diameter 46 ft Sack Storage 5000 sacks
Quarters Capacity 100 persons
Maximum Water Depth 350 ft Power Equipment
Drilling Depth 25000 ft
Cantilever Envelope 70 ft x 15 ft Main Power Four (4) Caterpillar 3516C HD diesel engines, each
Maximum Variable Load (drilling) 6246 kips rated at 1603 bkW @ 1,200 rpm. Maximum electrical
power available per generator set is 1500 ekW .
Drilling Equipment
Emergency Power One (1) Cummins KTA 38 DM diesel engine rated 970
Derrick Loadmaster bottleneck Derrick INC., 185 ft hight with 30 ft x bkW @ 1,800 rpm driving a STAMFORD HCM 634 800
30 ft base, rated static hook load capacity 1,000,000 lbs ekW AC generator 1203 amps.
with twelfth 1-3/8" drilling line.Loading Setback of Derrick:
168 stands of 5” drill pipe and 9 stands of drill collars. Well Control Equipment

Drawworks TTS/UH 3G 500 - 300 - DDW, 3,000 HP, driven by two (2) Diverter Cameron, 500 psi, 29-1/2” fixed diverter with two (2)
motors each rated 1,150 HP continuous. 14'' discharge lines and 16'' hydraulically operated ball
valves.
Rotary Table AMERICAN BLOCK / SRT, 49 1/2" maximum opening, BOP Stack 13-5/8 in. High Pressure Blowout Preventor Cameron,
hydraulic, 30,000 ft-lbs torque and static load 800 short One (1) 5K annular preventor, one (1) cameron Type U
tons. 10K WP two double ram preventor.
21-1/4 in. Low Pressure Blowout Preventor Shaffer,
Top Drive TTS / STD-500-AC-1M Top Drive system, rotary speed up one (1) 2K annular preventor, one (1) 2K double ram
to 274 rpm and continous torque wrench up to 115,000 ft- type preventor.
lbs.
Pipe Handling Main Well Center: TTS/ JiM 10 T LR, Varco PS-15, PS-16, Pedestal Cranes
TTS PS-500 power slips.
Offline Stand-building: ITALGRU C1499 Diesel-Hydraulic Deck Cranes Three (3) ITALGRU Diesel-Hydraulic cranes with 130,7
ft boom, rated 55.1 short tons @ 24,6 ft; 15,54 short
Drill Pipe 5" tons @ 120 ft radius; located Stbd Side, Port Fwd &
Port Aft
Mud Pumps Three (3) WEATHERFORD E1600, 1,600 HP rated, 5000 Mooring System
psi max. discharge Pressure at liner 5", 5 1/2", each driven
by two 1,150 HP motors. Mooring System Four electric (4)EMS/EMS-MW-SD40-100-E anchor
Solid Control Three (3) FSI/ 500/5000B CASCADE shale shakers, One winches, static holding capacity 66 short tons. Pull 1st
(1) FSI/5000B Mud cleaner. speed @ 0,273 ft/sec: 44 short ton & Pull 2nd speed @
0,547 ft/sec: 20 short tons.
July-2015

These specifications are intended for general reference purposes only, as actual equipment and specifications may vary based upon subsequent
changes, the contract situation and customer need. All equipment shall be operated and maintained at all times, in compliance with Vietsovpetro
policies and procedures, and within its stated operational limits or continuous rated capacity, in order to assure maximum efficiency.
These specifications are intended for general reference purposes only, as actual equipment and specifications may vary based upon subsequent
changes, the contract situation and customer need. All equipment shall be operated and maintained at all times, in compliance with Vietsovpetro
policies and procedures, and within its stated operational limits or continuous rated capacity, in order to assure maximum efficiency.

You might also like