MLR2-E Receiver Product Line

DRL2E DRLMX DVL2A MLR2E-SP

Digital Receiver Module Mobitex ® Receiver Module and DVACS* Receiver Module Spare Parts Kit
• 2 digital lines Sure Signal Central Station Radio
SM
• DVACS compatible line module CPM2..................central processor module
• DSP Processing • Higher level of security DRL2E ................2-line digital module “Meeting the challenges, Sur-Gard introduces the MLR2-E,
• 1 Radio Line
•
•
•
•
Expands MLR2-E to 30 lines
Flash Memory
Caller ID
Two-way voice receiving
• Mobitex communication
®

• Interfaces with Sure SignalS M

Central Station Radio
• Monitors master leg with carrier
detect for phone line trouble
• 255 event memory per line
• Built-in watchdog
DML2E ................backplane circuit board
DML4 ..................backplane circuit board
MCBL....................telephone connection cable
SER10..................serial computer cable
MLR2-E the evolution in central station receiver design. Featuring
increased expandability, greater flexibility and superior
signal management...”
• 255 event memory per line
• Can be programmed from the CPM2 • Expands MLR-MX to 15 lines • Utilizes MLRX expansion cage CH6UF2 ..............power ribbon cable
or PC with console software • Flash Memory CH6UF3 ..............data bus ribbon cable
• Individual line processing
• DNIS recognition

Accessories
SG-MLRXBP-UL PRINTER ACCESSORIES
MLRXE CABINETS
Line-Card Expansion Cage Receiver Cabinets • Blank plate for SG-MLRXE SG-DP8340P......12VDC Dot Matrix Printer (ULC)
SG-PCBL10 ........Parallel printer cable
• 19” Rack Mount • SG-MLR2-CSX- 2 line desk Transformer SG-RIB 1 ............Replacement ribbon for
• Holds 2 DRL2E receiver modules or mount Non U.L. SG-DP8340P printer
2 DRLMX modules or 1 DRL2E and • SG-MLR2-CS- 6 line desk • 16V 175VA transformer for UL and SG-SER 10..........Serial computer cable
1 DRLMX module mount U.L. listed 30 line applications
• SG-MLR2-CM- 14 line desk
mount U.L. listed
• SG-MLR2-CL- 30 line floor
mount U.L. listed

Additional Features Communication Formats

• Battery backed up RAM on each DRL2E • Switched-negative outputs on CPM2 • All major ITI formats • FBI Super Fast format with or without parity
line card module for programming and
event buffering
• Up to 64 different option settings
(special applications)
• AC-loss detection and standby
battery supervision
• All common pulse formats
• 4/1, 4/2, 4/3 and DTMF formats
• ACRON DTMF format
• RADIONICS Modem II, Modem IIE, Modem IIIa 2
and BFSK formats
• SIA format: 110 and 300 baud, tone
The Evolution of the Central Station Receiver
• Any handshake frequencies by increments • Low battery detection and automatic low • Contact ID (DTMF) format and data acknowledgement
of 100 Hz from 300 Hz to 3400 Hz, Dual battery disconnect to prevent deep- • Adcor 20 baud (Level 1, 2, 3, 8, 20)
Tone, SIA FSK, Modem II and ITI selected discharge damage to battery • Super Fast or High Speed DTMF format, • SK FSK1, FSK2
by configuration commands • Operator Acknowledge option with or without parity
• Up to 8 different handshakes per profile • Telephone Line Supervision and reporting
• Programmable serial port configurations • Caller ID, Calling name and DNIS

SG Security Communications
401 Magnetic Drive, Units 24-28,
*DVACS is a registered trade mark of Electro Arts Limited and covers a wide variety of products. Full DVACS compatibility applies only Downsview, Ontario, Canada M3J 3H9
when the Sur-Gard equipment is connected to the RS-232 port or a DVACS F1F2-List 3 (or a DVACS F1F2-List 1) subset which is
connected to a DVACS Hub-324 (DVACS Hub-308) Card. DVACS is available in Canada only.
(416) 665-4494
The Sure Signal solution utilizes the BellSouth Intelligent Wireless Network in the United States.
Rogers Wireless Inc. is the sole provider of Mobitex technology in Canada. 1-800-418-7618
Printed in Canada 08/00 P/N 29005029 R001 Microsoft and Windows are either registered trademarks or trademarks of Microsoft Corporation in the U.S. and/or other countries. www.sur-gard.com
 Adapting to Change...
As Central Monitoring Stations continue to grow, the ability to adapt by
incorporating new technology will be the key to managing a successful
operation. Market conditions may vary and depending on the circumstances,
physical space may be at a premium and upgrades to automation software
must be completed on a regular basis. The new features of the MLR2-E are
based upon the understanding that monitoring station environments are always
changing and manifesting new needs. The DRL2E The CPM2
The DRL2E line card is a receiving module The CPM2 monitors the operation and
In response to these demands, Sur-Gard introduces the MLR2-E, the evolution for use in the MLR2-E and MLR2 digital performance of every line card. The
in central station receiver design. The MLR2-E provides increased receivers. Each DRL2E contains two heartbeat feature provides supervision of the
expandability, new features, greater flexibility, superior signal management and telephone line inputs and supports automation software from the CPM2; if your
multiple communication formats, automation system goes off-line, the CPM2
is backwards compatible with the MLR2-DG. two-way voice communication and caller will automatically detect this and go into
identification. One RS232 serial port manual mode. Along with a built-in keypad
outputs to a PC for easy programming and and LCD display, the CPM2 features one
option changing. parallel printer port and one RS232 serial
computer interface for seamless integration
with your automation software.

MLR2-E The MLR2E is packed in a 3U (5 1/4”) height eurocard cage for

19” rack mounting. Desktop cases are available as an option.

Multi-Line Digital Receiver

Features DNIS and Caller ID Profiles Monitoring Diagnostics Wireless Communication Expansion
Additional features of the MLR2-E The MLR2-E receiver utilizes DNIS * Using DNIS and Caller ID allows the All programming on the MLR2-E can The CPM2 systematically polls each For greater receiving capabilities add a Start off with 2 lines, and as your requirements
include: flash memory for easy upgrades signal management; this feature permits profile to be selected before the call is be verified on the LCD display or line card and in turn, the line cards Sur-Gard wireless solution-the DRLMX and increase, simply add on DRL2E line cards. The
and individual line processing. Each line faster response to an incoming call, answered and configures the line card printed. Printer events, computer supervise the CPM2 polling. Computer Sure SignalSM Central Station Radio (CSR). The MLR2-E can be expanded to a maximum of 30
card is hot-swappable and can be reducing online time and therefore, to provide the correct handshake first, events and all caller activity can be verification is tested systematically with DRLMX utilizes the intelligent Mobitex ® telephone lines, requiring 15 DRL2E line
programmed via a PC. Digital Signal provides extensive savings to the central saving you on-line time and increasing displayed and printed for verification. heartbeat test signals and during wireless network to receive signals at the cards. The DRL2E is backwards compatible; if
Processing (DSP) increases recognition station. Built-in Caller ID allows the efficiency – the first handshake is Generous data memory allows for a computer outages all information is central monitoring station. Each DRLMX line you wish to expand and already have an
accuracy, allowing for greater flexibility operator to trace misprogrammed or always the correct handshake. large event buffer. stored in the event memor y. The unit card contains one radio line and a 255 event MLR2-DG, it is as easy as adding on the new
when adding new features. malfunctioning diallers, as well as Dedicated equipment for specific tasks will also monitor printer activity to memory buffer. DRL2E module. The system can also be fitted
interference. is no longer needed. determine readiness and paper status. with a variety of Sur-Gard line cards including
the DRL2A, the DRLMX (Mobitex ®) and the
* Dialled Number Identification System
DVL2A for DVACS* communication.