FOX "S" SERIES

MAIN FEATURES
The FOX generating set range offers a very large application target with powers
ranging from 9.00 to 24.00 kVA at 50 and 60Hz. The new compact and sturdy
design and maximum noise reduction make it suitable for all work site and civil
uses, both mobile and stationary. Well-supplied equipment and a large range of
accessories are available for customisation. The new FOX includes the standard
tested and reliable Manual Guard Evolution control panel and is equipped with a
large display screen, emergency button, ignition barrel and circuit breaker. As
with all Visa products, all the unit's parts are subject to a strict operating test
involving over 30 checks prior to delivery.

Mod. P 21 FOX

DESCRIPTION PICTURE PAINTING

Three large, protected, sound attenuated Galvanized sheet steel is used to manufacture the canopy: minimum zinc
openings, guarantee good cooling air thickness is 20 micron. The powder-coated thermoset paint has a polyester
flow. The air intake is located in the back, resin base highly resistant to atmospheric agents. The painting process is
avoiding the recirculation of hot air that is preceded by a phospho-degreasing cycle with a demineralised water rinse
expelled from the front top part of the and then dried. Minimum paint thickness is 70 micron. After the power-coated
canopy. paint is applied, the component is kept in the oven until polymerisation is
complete. Durability class is C3-M according to UNI EN ISO 12944 -2.
Further details about base-frames in document 109000000038.
The unit is specifically designed for
mobile use. It has strong support feet;
reinforced door key locks; slots that allow
STANDARD EQUIPMENT
condensation to be drained from the
-Industrial engine, complete with cooling system, injection system with
cooling ducts.
automatic speed regulator, electrical ignition system and battery charger -
Industrial, brushless alternator with electronic voltage control system - Control
and governing panel box with Manual Guard Evolution device, 2 or 4 pole
Total access to the main components circuit breaker, differential (standard on units with Man. Guard Evo. device in
from the side doors making control and the CE market) - Load bearing baseframe with liquid retention basin - High
maintenance operations easy to carry damping anti-vibration mounts placed between the engine/alternator and
out. baseframe - 50 l fuel tank with electronic level sensor, plugs. Loading and
unloading - Engine oil extraction pump - Fuel decanter filter - Sound-insulated
canopy made with galvanised and painted sheet metal - Key-locks on the
doors -Fire-reaction Euroclass Bs2D0 fireproof polyester sound-proofing -
Highly-insulating pad on the internal exhaust pipe - Automobile-type gasket
Access to the engine and alternator has
with steel core (non adhesive) - High sound insulating exhaust silencer - Rain
been improved due to the possibility of
cap -Lifting points on all 4 sides (and overlapping for delivery) - Set-up for
opening the doors or completely
quick fuel release fittings (auxiliary, external tank connection) - Battery cut-off
removing the back panel.
switch (only in the CE version).

OPTIONAL EQUIPMENT
The Fox includes, as standard, the well- -External sockets –Additional air intake panels on the P14 and P21 models –
tested and reliable Guard Evolution Oversize fuel tank – Retention basin for oversize fuel tank -AMF automatic
controller, equipped with a very efficient panel and auto start -ATS changeover switch panel -Radiator liquid level
software that has no equal in the market sensor -220v electric pre-heater -PW005 terminal board for separate
in terms of accuracy and number of electrical panel -Canopy colour can be requested if different from RAL yellow
functions. 1007 or RAL white 9010 -Slow moving trailer

PHOTO OF EXTERNAL THREE-PHASE SOCKETS AND AIR INTAKE ON

N.A.= not available; O.R. = on request. Reference conditions standard ISO8528-1: temperature 25 °C, altitude 1-1000 m. A.M.S.L., 30% relative humidity, 100 kPa atmospheric pressure (1 bar), 0.8
delayed power factor, load applied balanced not distorting. The data provided is subject to variation without prior notice.

Visa S.p.A. via I° Maggio, 55 31043 Fontanelle (TV) Italy Tel: +39 0422 5091 Fax: +39 0422 509350
Mail: [email protected] Web: www.visa.it SAP 109000000018-001-02 29-09-2015
1.1
Powered by TCPDF (www.tcpdf.org)