Module 1

Lecture 2: Weather and hydrologic cycle

(contd.)
 Hydrology

Hydor + logos (Both are Greek words)

“Hydor” means water and “logos” means study.

Hydrology is a science which deals with the occurrence, circulation and

distribution of water of the earth and earth’s atmosphere.

Hydrological Cycle: It is also known as water cycle. The hydrologic cycle is a

continuous process in which water is evaporated from water surfaces and the
oceans, moves inland as moist air masses, and produces precipitation, if the
correct vertical lifting conditions exist.

Lecture 1 Module 1
 Hydrologic Cycle

Lecture 1
(climateofind
ia.pbworks.c
om)
 Stages of the Hydrologic cycle

 Precipitation

 Infiltration

 Interception

 Depression storage

 Run-off

 Evaporation

 Transpiration

 Groundwater
Lecture 1 Module 1
Precipitation

Forms of precipitation
 Rain
Water drops that have a diameter of at least 0.5 mm. It can be classified based on
intensity as,
Light rain  up to 2.5 mm/h
Moderate rain 2.5 mm/h to 7.5 mm/h
Heavy rain  > 7.5 mm/h
 Snow
Precipitation in the form of ice crystals which usually combine to form flakes, with
an average density of 0.1 g/cm3.
 Drizzle
Rain-droplets of size less than 0.5 mm and rain intensity of less than 1mm/h is
known as drizzle.
Forms of precipitation Contd…

Glaze
When rain or drizzle touches ground at 0oC, glaze or freezing rain is
formed.
Sleet
It is frozen raindrops of transparent grains which form when rain falls
through air at subfreezing temperature.
Hail
It is a showery precipitation in the form of irregular pellets or lumps of ice of
size more than 8 mm.
Rainfall measurement

The instrument used to collect and measure the precipitation is called raingauge.

Types of raingauges:
1) Non-recording : Symon’s gauge
2) Recording
 Tipping-bucket type
 Weighing-bucket type
 Natural-syphon type

Symon’s gauge
Recording raingauges
The instrument records the graphical variation of the rainfall, the total
collected quantity in a certain time interval and the intensity of the rainfall
(mm/hour).
It allows continuous measurement of the rainfall.

1. Tipping-bucket type
These buckets are so balanced that when
0.25mm of rain falls into one bucket, it tips
bringing the other bucket in position.

Tipping-bucket type raingauge

2. Weighing-bucket type
 The catch empties into a bucket mounted

on a weighing scale.

 The weight of the bucket and its contents

are recorded on a clock work driven chart.

 The instrument gives a plot of cumulative

rainfall against time (mass curve of

rainfall).

Weighing-bucket type raingauge

3. Natural Syphon Type (Float Type)
 The rainfall collected in the funnel
shaped collector is led into a float
chamber, causing the float to rise.

 As the float rises, a pen attached to

the float through a lever system
records the rainfall on a rotating drum
driven by a clockwork mechanism.

 A syphon arrangement empties the Float-type raingauge

float chamber when the float has

reached a preset maximum level.
Presentation of rainfall data

 Hyetograph

Plot of rainfall intensity against

time, where rainfall intensity is depth of
rainfall per unit time

 Mass curve of rainfall

Plot of accumulated precipitation

against time, plotted in chronological
Rainfall Mass Curve
order.

 Point rainfall

It is also known as station rainfall . It

refers to the rainfall data of a station
Mean precipitation over an area

The following methods are used to measure the average precipitation

over an area:
1. Arithmetic Mean Method
2. Thiessen polygon method
3. Isohyetal method
4. Inverse distance weighting
1. Arithmetic Mean Method
Simplest method for determining areal average P1

1 N
P
N  Pi P2

i1 P3
th
where, Pi : rainfall at the i raingauge station
N : total no: of raingauge stations
Mean precipitation over an area Contd…

2. Thiessen polygon method

This method assumes that any point in the watershed receives the same
amount of rainfall as that measured at the nearest raingauge station.
Here, rainfall recorded at a gage can be applied to any point at a distance
halfway to the next station in any direction.
Steps:
a) Draw lines joining adjacent gages
b) Draw perpendicular bisectors to the lines created in step a)
c) Extend the lines created in step b) in both directions to form representative
areas for gages
d) Compute representative area for each gage
e) Compute the areal average using the following:
P
1
P A i P1 = 10 mm, A1 = 12 Km2 1

PNi
A i1 P2 = 20 mm, = 15 Km2 P 1

2
A2
P3 = 30 mm, A3 = 20 km2
2 P
1210 15 20  20 30 3
P 47  20.7 mm 3

10
3. Isohyetal method
1
P 20
A
Ai
N
P1
A1=5 , p1 = 5
Pi
i1

where, Ai : Area between each pair of adjacent isohyets A2=20 , p2 = 15

Pi : Average precipitation for each pair of P2
adjacent isohyets
 A3=15 , p3 = 25

5  5 2015 15 25 10 35 P3

P 
30
21.mm A4=10 , p3 = 35
50
 4. Inverse distance weighting (IDW) method
Prediction at a point is more influenced by nearby measurements than that
by distant measurements. The prediction at an ungauged point is
inversely proportional to the distance to the measurement points.
Steps:
a) Compute distance (di) from ungauged point P1=10
to all measurement points.
d12  x1  x2 2  y
1 y 
2
2
P2= 20 d1=25
d2=15
b) Compute the precipitation at the ungauged
P3=30
point using the following formula:
d3=10
N
 102 202 302 p
∑i  2  Pˆ 251  15
Pˆ  P 1
 10
1  25.24 mm
i1  d i 
N
 1    
 2  2
25 15 10
2 2

i1  di 
N = No: of gauged points
Lecture 1 Module 1
Precipitation

Adjustments of precipitation data

 Check for continuity and consistency of rainfall records

 Normal rainfall as standard of comparison

 Normal rainfall: Average value of rainfall at a particular date, month or year

over a specified 30-year period.

Check for Continuity: (Estimation of missing data)

P1, P2, P3,…, Pm  annual precipitation at neighboring M stations 1, 2, 3,…,
M respectively
Px  Missing annual precipitation at station X
N1, N2, N3,…, Nm & Nx normal annual precipitation at all M stations and at X
respectively
Precipitation

Adjustments of precipitation data Contd…

Check for continuity

1. Arithmetic Average Method:

This method is used when normal annual precipitations at various
stations show variation within 10% w.r.t station X

2. Normal Ratio Method

Used when normal annual precipitations at various stations show
variation >10% w.r.t station X
Test for consistency of record

Causes of inconsistency in records:

Shifting of raingauge to a new location

 Change in the ecosystem due to calamities

 Occurrence of observational error from a certain date

Relevant when change in trend is >5years

Precipitation

Adjustments of precipitation data Contd…

Test for consistency of record

Accumulated Precipitation of Station X, ΣPx

82
83
Double Mass Curve Technique 84

When each recorded data comes 85

from the same parent population, they 86

87
are consistent.
88
89
 Break in the year : 1987
90
 Correction Ratio : Mc/Ma = c/a
Average accumulated precipitation of
 Pcx = Px*Mc/Ma neighbouring stations ΣPav

Pcx – corrected precipitation at any time period t1 at station X

Px – Original recorded precipitation at time period t1 at station X
Mc – corrected slope of the double mass curve
Ma – original slope of the mass curve
Precipitation

Depth-Area-Duration relationships

It indicates the areal distribution characteristic of a storm of given duration.

Depth-Area relationship
For a rainfall of given duration, the average depth decreases with the area in
an exponential fashion given by:

P  P0 exp(KA n )

where P : average depth in cms over an area A km2,

Po : highest amount of rainfall in cm at the storm centre
K, n : constants for a given region
Depth-Area-Duration relationships Contd…

The development of maximum depth-area-duration relationship is

known as DAD analysis.
It is an important aspect of hydro-meteorological study.

(Subramanya, 1994)
Typical DAD curves
Intensity-Duration-Frequency (IDF) curves
 It is necessary to know the rainfall intensities of different durations and different
return periods, in case of many design problems such as runoff
disposal, erosion control, highway construction, culvert design etc.

 The curve that shows the inter-dependency between i (cm/hr), D (hour) and T
(year) is called IDF curve.

 The relation can be expressed in general form as:

x
kT i – Intensity (cm/hr)
i 
D  D – Duration (hours)
K, x, a, n – are constant for a given
a
n
catchment
Intensity-Duration-Frequency (IDF) curves Contd…

Typical IDF Curve

14
T = 25 years
12
Intensity, cm/hr

T = 50 years
10 T = 100
8 years

6
k = 6.93
4 x = 0.189
2 a = 0.5
0 n = 0.878
0 1 2 3 4 5 6
Duration, hr
Exercise Problem
• The annual normal rainfall at stations A,B,C and D in a basin are 80.97,
67.59, 76.28 and 92.01cm respectively. In the year 1975, the station D
was inoperative and the stations A,B and C recorded annual precipitations
of 91.11, 72.23 and 79.89cm respectively. Estimate the rainfall at station D
in that year.