Verification Control

SAP2000 Steel Frame Design Verification Examples Filename: #VALUE! User Switches (Overrides Cells E2 thru E5):
Verif manual version: 19.0.0 Solver: Default
Path to SAP2000.exe: C:\MPT-CSI\Testing\SAP2000\SAP2000 v18.0.0 Build 1187 32-bit\SAP2000.exe Delete Files: Yes (Applies to analysis files only, not input or output files)
Path to data files: C:\MPT-CSI\Testing - Suite Versions\SAP2000\Published Verification\v18\Design Examples\Steel Frame 32 Bit: Default
Last checked: Process: Default

Run This Max % Diff From Applies to Applies to Applies Applies

Code Region Code & Example Number Example Title Example Check This Example Version 19.0.0 Version Level Time Checked Ultimate Advanced to Plus to Basic Comments
American AISC 360-05 Ex001 Wide Flange Member Under Bending Yes Yes Not Checked Yes Yes Yes Yes
American AISC 360-05 Ex002 Built Up Wide Flange Member Under Compression Yes Yes Not Checked Yes Yes Yes Yes
American AISC 360-10 Ex001 Wide Flange Member Under Bending Yes Yes Not Checked Yes Yes Yes Yes
American AISC 360-10 Ex002 Built Up Wide Flange Member Under Compression Yes Yes Not Checked Yes Yes Yes Yes
American AISC ASD-89 Ex001 Wide Flange Member Under Bending Yes Yes Not Checked Yes Yes Yes Yes
American AISC ASD-89 Ex002 Wide Flange Member Under Compression Yes Yes Not Checked Yes Yes Yes Yes
American AISC LRFD-93 Ex001 Wide Flange Member Under Bending Yes Yes Not Checked Yes Yes Yes Yes
American AISC LRFD-93 Ex002 Wide Flange Member Under Combined Compression & Biaxial Bending Yes Yes Not Checked Yes Yes Yes Yes
Australian AS 4100-1998 Ex001 Wide Flange Member Under Compression Yes Yes Not Checked Yes Yes Yes Yes
Australian AS 4100-1998 Ex002 Wide Flange Member Under Bending Yes Yes Not Checked Yes Yes Yes Yes
Australian AS 4100-1998 Ex003 Wide Flange Member Under Combined Compression & Bending Yes Yes Not Checked Yes Yes Yes Yes
British BS 5950-2000 Ex001 Wide Flange Section Under Bending Yes Yes Not Checked Yes Yes Yes Yes
British BS 5950-2000 Ex002 Square Tube Member Under Compression & Bending Yes Yes Not Checked Yes Yes Yes Yes
Canadian CSA S16-09 Ex001 Wide Flange Member Under Bending Yes Yes Not Checked Yes Yes Yes Yes
Canadian CSA S16-09 Ex002 Wide Flange Member Under Compression & Bending Yes Yes Not Checked Yes Yes Yes Yes
Canadian CSA S16-14 Ex001 Wide Flange Member Under Bending Yes Yes Not Checked Yes Yes Yes Yes
Canadian CSA S16-14 Ex002 Wide Flange Member Under Compression & Bending Yes Yes Not Checked Yes Yes Yes Yes
Eurocode EN 3-2005 Ex001 Wide Flange Member Under Combined Compression & Bending Yes Yes Not Checked Yes Yes Yes Yes
Eurocode EN 3-2005 Ex002 Wide Flange Section Under Bending Yes Yes Not Checked Yes Yes Yes Yes
Eurocode EN 3-2005 Ex003 Wide Flange Section Under Combined Compression & Bending Yes Yes Not Checked Yes Yes Yes Yes
Indian IS 800-2007 Ex001 Wide Flange Member Under Compression Yes Yes Not Checked Yes Yes Yes Yes
Indian IS 800-2007 Ex002 Wide Flange Member Under Bending Yes Yes Not Checked Yes Yes Yes Yes
Indian IS 800-2007 Ex003 Wide Flange Member Under Combined Compression & Biaxial Bending Yes Yes Not Checked Yes Yes Yes Yes
Italian NTC 2008 Ex001 Wide Flange Section Under Combined Compression & Bending Yes Yes Not Checked Yes Yes Yes Yes
Italian NTC 2008 Ex002 Wide Flange Member Under Combined Compression & Bending Yes Yes Not Checked Yes Yes Yes Yes
Korean KBC 2009 Ex001 Wide Flange Member Under Bending Yes Yes Not Checked Yes Yes Yes Yes
Korean KBC 2009 Ex002 Built Up Wide Flange Member Under Compression Yes Yes Not Checked Yes Yes Yes Yes
New Zealand NZS 3404-1997 Ex001 Wide Flange Member Under Compression Yes Yes Not Checked Yes Yes Yes Yes
New Zealand NZS 3404-1997 Ex002 Wide Flange Member Under Bending Yes Yes Not Checked Yes Yes Yes Yes
New Zealand NZS 3404-1997 Ex003 Wide Flange Member Under Combined Compression & Bending Yes Yes Not Checked Yes Yes Yes Yes

Page 1 of 83
C:\Verification\v14.0.0_I\go32_oop_adv_xls\Example 5-008c.sdb
Analysis successful with 0 warnings (4/19/2009 10:07:54 PM)
Data exported to Example 5-008c.mdb

C:\Verification\v14.0.0_I\go32_oop_adv_xls\Example 5-008d.sdb
Analysis successful with 0 warnings (4/19/2009 10:08:03 PM)
Data exported to Example 5-008d.mdb

C:\Verification\v14.0.0_I\go32_oop_adv_xls\Example 5-008e.sdb
Analysis successful with 0 warnings (4/19/2009 10:08:13 PM)
Data exported to Example 5-008e.mdb

C:\Verification\v14.0.0_I\go32_oop_adv_xls\Example 5-008f.sdb
Analysis successful with 0 warnings (4/19/2009 10:08:25 PM)
Data exported to Example 5-008f.mdb

C:\Verification\v14.0.0_I\go32_oop_adv_xls\Example 5-009a.sdb
Analysis successful with 0 warnings (4/19/2009 10:08:42 PM)
Data exported to Example 5-009a.mdb

C:\Verification\v14.0.0_I\go32_oop_adv_xls\Example 5-009b.sdb
Analysis successful with 0 warnings (4/19/2009 10:08:52 PM)
Data exported to Example 5-009b.mdb

C:\Verification\v14.0.0_I\go32_oop_adv_xls\Example 5-010.sdb
Analysis successful with 0 warnings (4/19/2009 10:09:04 PM)
Data exported to Example 5-010.mdb

C:\Verification\v14.0.0_I\go32_oop_adv_xls\Example 5-011.sdb
Analysis successful with 0 warnings (4/19/2009 10:09:16 PM)
Data exported to Example 5-011.mdb

C:\Verification\v14.0.0_I\go32_oop_adv_xls\Example 5-012a.sdb
Analysis successful with 0 warnings (4/19/2009 10:10:19 PM)
Data exported to Example 5-012a.mdb

C:\Verification\v14.0.0_I\go32_oop_adv_xls\Example 5-012b.sdb
Analysis successful with 0 warnings (4/19/2009 10:13:47 PM)
Data exported to Example 5-012b.mdb

C:\Verification\v14.0.0_I\go32_oop_adv_xls\Example 5-012c.sdb
Analysis successful with 0 warnings (4/19/2009 10:14:46 PM)
Data exported to Example 5-012c.mdb

C:\Verification\v14.0.0_I\go32_oop_adv_xls\Example 5-012d.sdb
Analysis successful with 0 warnings (4/19/2009 10:18:09 PM)
Data exported to Example 5-012d.mdb

C:\Verification\v14.0.0_I\go32_oop_adv_xls\Example 5-013.sdb
Analysis successful with 0 warnings (4/19/2009 10:18:36 PM)
 Data exported to Example 5-013.mdb

C:\Verification\v14.0.0_I\go32_oop_adv_xls\Example 6-001.sdb
Analysis successful with 0 warnings (4/19/2009 10:21:28 PM)
Data exported to Example 6-001.mdb

C:\Verification\v14.0.0_I\go32_oop_adv_xls\Example 6-002.sdb
Analysis successful with 0 warnings (4/19/2009 10:21:41 PM)
Data exported to Example 6-002.mdb

C:\Verification\v14.0.0_I\go32_oop_adv_xls\Example 6-003a.sdb
Analysis successful with 0 warnings (4/19/2009 10:25:18 PM)
Data exported to Example 6-003a.mdb

C:\Verification\v14.0.0_I\go32_oop_adv_xls\Example 6-003b.sdb
Analysis successful with 0 warnings (4/19/2009 10:28:41 PM)
Data exported to Example 6-003b.mdb

C:\Verification\v14.0.0_I\go32_oop_adv_xls\Example 6-004.sdb
Analysis successful with 0 warnings (4/19/2009 10:28:51 PM)
Data exported to Example 6-004.mdb

C:\Verification\v14.0.0_I\go32_oop_adv_xls\Example 6-005a.sdb
Analysis successful with 0 warnings (4/19/2009 10:41:38 PM)
Data exported to Example 6-005a.mdb

C:\Verification\v14.0.0_I\go32_oop_adv_xls\Example 6-005b.sdb
Analysis successful with 0 warnings (4/19/2009 10:41:48 PM)
Data exported to Example 6-005b.mdb

C:\Verification\v14.0.0_I\go32_oop_adv_xls\Example 6-006.sdb
Analysis successful with 0 warnings (4/19/2009 10:55:46 PM)
Data exported to Example 6-006.mdb

C:\Verification\v14.0.0_I\go32_oop_adv_xls\Example 6-007.sdb
Analysis successful with 0 warnings (4/19/2009 11:14:16 PM)
Data exported to Example 6-007.mdb

C:\Verification\v14.0.0_I\go32_oop_adv_xls\Example 6-008.sdb
Analysis successful with 0 warnings (4/19/2009 11:16:45 PM)
Data exported to Example 6-008.mdb

C:\Verification\v14.0.0_I\go32_oop_adv_xls\Example 6-009.sdb
Analysis successful with 0 warnings (4/19/2009 11:17:23 PM)
Data exported to Example 6-009.mdb

C:\Verification\v14.0.0_I\go32_oop_adv_xls\Example 6-010.sdb
Analysis successful with 0 warnings (4/19/2009 11:21:18 PM)
Data exported to Example 6-010.mdb
C:\Verification\v14.0.0_I\go32_oop_adv_xls\Example 6-011a.sdb
Analysis successful with 0 warnings (4/20/2009 12:27:24 AM)
Data exported to Example 6-011a.mdb

C:\Verification\v14.0.0_I\go32_oop_adv_xls\Example 6-011b.sdb
Analysis successful with 0 warnings (4/20/2009 1:42:42 AM)
Data exported to Example 6-011b.mdb

C:\Verification\v14.0.0_I\go32_oop_adv_xls\Example 6-012.sdb
Analysis successful with 0 warnings (4/20/2009 1:43:05 AM)
Data exported to Example 6-012.mdb

C:\Verification\v14.0.0_I\go32_oop_adv_xls\Example 7-001.sdb
Analysis successful with 0 warnings (4/20/2009 1:43:14 AM)
Data exported to Example 7-001.mdb

C:\Verification\v14.0.0_I\go32_oop_adv_xls\Example 7-002.sdb
Analysis successful with 0 warnings (4/20/2009 1:43:24 AM)
Data exported to Example 7-002.mdb

C:\Verification\v14.0.0_I\go32_oop_adv_xls\Example 7-003.sdb
Analysis successful with 0 warnings (4/20/2009 1:43:50 AM)
Data exported to Example 7-003.mdb
 Problem Number Access Database File
AISC 360-05 Ex001 AISC 360-05 Ex001.mdb
AISC 360-05 Ex002 AISC 360-05 Ex002.mdb
AISC 360-10 Ex001 AISC 360-10 Ex001.mdb
AISC 360-10 Ex002 AISC 360-10 Ex002.mdb
AISC ASD-89 Ex001 AISC ASD-89 Ex001.mdb
AISC ASD-89 Ex002 AISC ASD-89 Ex002.mdb
AISC LRFD-93 Ex001 AISC LRFD-93 Ex001.mdb
AISC LRFD-93 Ex002 AISC LRFD-93 Ex002.mdb
AS 4100-1998 Ex001 AS 4100-1998 Ex001.mdb
AS 4100-1998 Ex002 AS 4100-1998 Ex002.mdb
AS 4100-1998 Ex003 AS 4100-1998 Ex003.mdb
BS 5950-2000 Ex001 BS 5950-2000 Ex001.mdb
BS 5950-2000 Ex002 BS 5950-2000 Ex002.mdb
CSA S16-09 Ex001 CSA S16-09 Ex001.mdb
CSA S16-09 Ex002 CSA S16-09 Ex002.mdb
CSA S16-14 Ex001 CSA S16-14 Ex001.mdb
CSA S16-14 Ex002 CSA S16-14 Ex002.mdb
EN 3-2005 Ex001 EN 3-2005 Ex001.mdb
EN 3-2005 Ex002 EN 3-2005 Ex002.mdb
EN 3-2005 Ex003 EN 3-2005 Ex003.mdb
IS 800-2007 Ex001 IS 800-2007 Ex001.mdb
IS 800-2007 Ex002 IS 800-2007 Ex002.mdb
IS 800-2007 Ex003 IS 800-2007 Ex003.mdb
NTC 2008 Ex001 NTC 2008 Ex001.mdb
NTC 2008 Ex002 NTC 2008 Ex002.mdb
KBC 2009 Ex001 KBC 2009 Ex001.mdb
KBC 2009 Ex002 KBC 2009 Ex002.mdb
NZS 3404-1997 Ex001 NZS 3404-1997 Ex001.mdb
NZS 3404-1997 Ex002 NZS 3404-1997 Ex002.mdb
NZS 3404-1997 Ex003 NZS 3404-1997 Ex003.mdb
Example AISC 360-05 Ex001
American
Wide Flange Member Under Bending
Results Published in the Current Verification Examples
Output Percent
Case Parameter SAP2000 Independent Difference
Compactness Compact Compact 0.00%
Cb 1.004 1.002 0.20%
Lb = 5 ft
φbMn (k-ft) 378.750 378.750 0.00%
Cb 1.015 1.014 0.10%
Lb = 11.67 ft
φbMn (k-ft) 307.124 306.657 0.15%
Cb 1.138 1.136 0.18%
Lb = 35 ft
φbMn (k-ft) 94.377 94.218 0.17%
Results From Current Analyses
Number of Decimal Result for % Diff From
SAP2000 Result Places Comparison Version 19.0.0
- 0.0 Not Checked
3 0.000 Not Checked
3 0.000 Not Checked
3 0.000 Not Checked
3 0.000 Not Checked
3 0.000 Not Checked
3 0.000 Not Checked
#VALUE!
Example AISC 360-05 Ex002
American
Built Up Wide Flange Member Under Compression
Results Published in the Current Verification Examples
Output Percent
Parameter SAP2000 Independent Difference
Compactness Slender Slender 0.00%
φcPn (kip) 506.1 506.1 0.00%
Results From Current Analyses
Number of Decimal Result for % Diff From
SAP2000 Result Places Comparison Version 19.0.0
- 0.0 Not Checked
1 0.0 Not Checked
#VALUE!
Example AISC 360-10 Ex001
American
Wide Flange Member Under Bending
Results Published in the Current Verification Examples
Output Percent
Case Parameter SAP2000 Independent Difference
Compactness Compact Compact 0.00%
Cb 1.004 1.002 0.20%
Lb = 5 ft
φbMn (k-ft) 378.750 378.750 0.00%
Cb 1.015 1.014 0.10%
Lb = 11.67 ft
φbMn (k-ft) 307.124 306.657 0.15%
Cb 1.138 1.136 0.18%
Lb = 35 ft
φbMn (k-ft) 94.377 94.218 0.17%
Results From Current Analyses
Number of Decimal Result for % Diff From
SAP2000 Result Places Comparison Version 19.0.0
- 0.0 Not Checked
3 0.000 Not Checked
3 0.000 Not Checked
3 0.000 Not Checked
3 0.000 Not Checked
3 0.000 Not Checked
3 0.000 Not Checked
#VALUE!
Example AISC 360-10 Ex002
American
Built Up Wide Flange Member Under Compression
Results Published in the Current Verification Examples
Output Percent
Parameter SAP2000 Independent Difference
Compactness Slender Slender 0.00%
φcPn (kip) 506.1 506.1 0.00%
Results From Current Analyses
Number of Decimal Result for % Diff From
SAP2000 Result Places Comparison Version 19.0.0
- 0.0 Not Checked
1 0.0 Not Checked
#VALUE!
Example AISC ASD-89 Ex001
American
Wide Flange Member Under Bending
Results Published in the Current Verification Examples
Output Percent
Parameter SAP2000 Independent Difference
Compactness Non-Compact Non-Compact 0.00%
Fb (ksi) 32.70 32.70 0.00%
fb (ksi) 30.74 30.74 0.00%
Results From Current Analyses
Number of Decimal Result for % Diff From
SAP2000 Result Places Comparison Version 19.0.0
- 0.0 Not Checked
2 0.00 Not Checked
2 0.00 Not Checked
#VALUE!
Example AISC ASD-89 Ex002
American
Wide Flange Member Under Compression
Results Published in the Current Verification Examples
Output Percent
Parameter SAP2000 Independent Difference
Compactness Compact Compact 0.00%
Fa (ksi) 16.47 16.47 0.00%
fa (ksi) 15.86 15.86 0.00%
Results From Current Analyses
Number of Decimal Result for % Diff From
SAP2000 Result Places Comparison Version 19.0.0
- 0.0 Not Checked
2 0.00 Not Checked
2 0.00 Not Checked
#VALUE!
Example AISC LRFD-93 Ex001
American
Wide Flange Member Under Bending
Results Published in the Current Verification Examples
Output Percent
Case Parameter SAP2000 Independent Difference
Compactness Compact Compact 0.00%
Cb 1.008 1.002 0.60%
Lb = 4.375 ft
φbMn (k-ft) 294.000 294.000 0.00%
Cb 1.010 1.014 -0.39%
Lb = 11.67 ft
φbMn (k-ft) 211.975 212.703 -0.34%
Cb 1.136 1.136 0.00%
Lb = 35 ft
φbMn (k-ft) 50.599 50.599 0.00%
Results From Current Analyses
Number of Decimal Result for % Diff From
SAP2000 Result Places Comparison Version 19.0.0
- 0.0 Not Checked
3 0.00 Not Checked
3 0.00 Not Checked
3 0.00 Not Checked
3 0.00 Not Checked
3 0.00 Not Checked
3 0.00 Not Checked
#VALUE!
Example AISC LRFD-93 Ex002
American
Wide Flange Member Under Combined Compression & Biaxial Bending
Results Published in the Current Verification Examples
Output Percent
Parameter SAP2000 Independent Difference
Compactness Compact Compact 0.00%
φcPn (kips) 1937.84 1937.84 0.00%
φbMnx (k-ft) 1200 1200 0.00%
φbMny (k-ft) 600.478 600.478 0.00%
D/C Ratio 0.974 0.974 0.00%
Results From Current Analyses
Number of Decimal Result for % Diff From
SAP2000 Result Places Comparison Version 19.0.0
- 0.0 Not Checked
2 0.00 Not Checked
3 0.00 Not Checked
3 0.000 Not Checked
3 0.000 Not Checked
#VALUE!
Example AS 4100-1998 Ex001
Australian
Wide Flange Member Under Compression
Results Published in the Current Verification Examples Results From Current Analyses #VALUE!
Output Percent Number of Decimal Result for % Diff From
Parameter SAP2000 Independent Difference SAP2000 Result Places Comparison Version 19.0.0
Compactness Compact Compact 0.00% - 0.0 Not Checked
Ns (kN) 6275 6275 0.00% 0 0 Not Checked
Nc (kN) 4385 4385 0.00% 0 0 Not Checked
Example AS 4100-1998 Ex002
Australian
Wide Flange Member Under Bending
Results Published in the Current Verification Examples
Output Percent
Parameter SAP2000 Independent Difference
Compactness Compact Compact 0.00%
Ms33 (kN-m) 837.5 837.5 0.00%
Mb (kN-m) 837.5 837.5 0.00%
Results From Current Analyses
Number of Decimal Result for % Diff From
SAP2000 Result Places Comparison Version 19.0.0
- 0.0 Not Checked
1 0.0 Not Checked
1 0.0 Not Checked
#VALUE!
Example AS 4100-1998 Ex003
Australian
Wide Flange Member Under Combined Compression & Bending
Results Published in the Current Verification Examples
Output Percent
Parameter SAP2000 Independent Difference
Compactness Compact Compact 0.00%
Mr33 (kN-m) 837.5 837.5 0.00%
Mi33 (kN-m) 823.1 823.1 0.00%
Mo (kN-m) 837.5 837.5 0.00%
Results From Current Analyses
Number of Decimal Result for % Diff From
SAP2000 Result Places Comparison Version 19.0.0
- 0.0 Not Checked
1 0.0 Not Checked
1 0.0 Not Checked
1 0.0 Not Checked
#VALUE!
Example BS 5950-2000 Ex001
British
Wide Flange Section Under Bending
Results Published in the Current Verification Examples
Output Percent
Parameter SAP2000 Independent Difference
Compactness Class 1 Class 1 0.00%
M33 (kN-m) 585.4 585.4 0.00%
Fv (kN) 292.25 292.25 0.00%
Mc (kN-m) 649.0 649.0 0.00%
Pv (kN-m) 888.4 888.4 0.00%
Results From Current Analyses
Number of Decimal Result for % Diff From
SAP2000 Result Places Comparison Version 19.0.0
- 0.0 Not Checked
1 0.0 Not Checked
2 0.0 Not Checked
1 0.0 Not Checked
1 0.0 Not Checked
#VALUE!
Example BS 5950-2000 Ex002
British
Square Tube Member Under Compression & Bending
Results Published in the Current Verification Examples
Output Percent
Parameter SAP2000 Independent Difference
Compactness Class 1 Class 1 0.00%
Cr (kN) 773.2 773.2 0.00%
Mrx (kN-m) 68.3 68.3 0.00%
Results From Current Analyses
Number of Decimal Result for % Diff From
SAP2000 Result Places Comparison Version 19.0.0
- 0.0 Not Checked
1 0.0 Not Checked
1 0.0 Not Checked
#VALUE!
Example CSA S16-09 Ex001
Canadian
Wide Flange Member Under Bending
Results Published in the Current Verification Examples
Output Percent
Case Parameter SAP2000 Independent Difference
W410x46 Compactness Class 1 Class 1 0.00%
W410x60 Compactness Class 1 Class 1 0.00%
Mf (kN-m) 250.0 250.0 0.00%
Lb = 0 m w/
Mr (kN-m)
W410x46 278.775 278.775 0.00%
Lb = 2 m w/
Mr (kN-m)
W410x46 268.97 268.83 0.05%
Lb = 4 m w/
Mr (kN-m)
W410x60 292.10 292.05 0.02%
Results From Current Analyses #VALUE!
Number of Decimal Result for % Diff From
SAP2000 Result Places Comparison Version 19.0.0
- 0.0 Not Checked
- 0.0 Not Checked
1 0.0 Not Checked

0.000 Not Checked

3

0.00 Not Checked

2

0.00 Not Checked

2
Example CSA S16-09 Ex002
Canadian
Wide Flange Member Under Compression & Bending
Results Published in the Current Verification Examples
Output Percent
Parameter SAP2000 Independent Difference
Compactness Class 2 Class 2 0.00%
Cr (kN) 3849.5 3849.5 0.00%
Mr33 (kN-m) 605.5 605.5 0.00%
Results From Current Analyses #VALUE!
Number of Decimal Result for % Diff From
SAP2000 Result Places Comparison Version 19.0.0
- 0.0 Not Checked
1 0.0 Not Checked
1 0.0 Not Checked
Example CSA S16-14 Ex001
Canadian
Wide Flange Member Under Bending
Results Published in the Current Verification Examples
Output Percent
Case Parameter SAP2000 Independent Difference
W410x46 Compactness Class 1 Class 1 0.00%
W410x60 Compactness Class 1 Class 1 0.00%
Mf (kN-m) 250.0 250.0 0.00%
Lb = 0 m w/
Mr (kN-m)
W410x46 278.775 278.775 0.00%
Lb = 2 m w/
Mr (kN-m)
W410x46 268.97 268.83 0.05%
Lb = 4 m w/
Mr (kN-m)
W410x60 292.10 292.05 0.02%
Results From Current Analyses #VALUE!
Number of Decimal Result for % Diff From
SAP2000 Result Places Comparison Version 19.0.0
- 0.0 Not Checked
- 0.0 Not Checked
1 0.0 Not Checked

0.000 Not Checked

3

0.00 Not Checked

2

0.00 Not Checked

2
Example CSA S16-14 Ex002
Canadian
Wide Flange Member Under Compression & Bending
Results Published in the Current Verification Examples
Output Percent
Parameter SAP2000 Independent Difference
Compactness Class 2 Class 2 0.00%
Cr (kN) 3849.5 3849.5 0.00%
Mr33 (kN-m) 605.5 605.5 0.00%
Results From Current Analyses #VALUE!
Number of Decimal Result for % Diff From
SAP2000 Result Places Comparison Version 19.0.0
- 0.0 Not Checked
1 0.0 Not Checked
1 0.0 Not Checked
Example EN 3-2005 Ex001
Eurocode
Wide Flange Member Under Combined Compression & Bending
Results Published in the Current Verification Examples
Output Percent
Parameter SAP2000 Independent Difference
Compactness Class 1 Class 1 0.00%
D/CAxial 0.334 0.334 0.00%
D/CBending 0.649 0.646 0.46%
Results From Current Analyses
Number of Decimal Result for % Diff From
SAP2000 Result Places Comparison Version 19.0.0
- 0.0 Not Checked
3 0.000 Not Checked
3 0.000 Not Checked
#VALUE!
Example EN 3-2005 Ex002
Eurocode
Wide Flange Section Under Bending
Results Published in the Current Verification Examples
Output Percent
Parameter SAP2000 Independent Difference
Compactness Class 1 Class 1 0.00%
Vpl,Rd (kN) 689.2 689.2 0.00%
Mc,33,Rd (kN-m) 412.8 412.8 0.00%
Mv,33,Rd (kN-m) 386.8 386.8 0.00%
Results From Current Analyses
Number of Decimal Result for % Diff From
SAP2000 Result Places Comparison Version 19.0.0
- 0 Not Checked
1 0.0 Not Checked
1 0.0 Not Checked
1 0.0 Not Checked
#VALUE!
Example EN 3-2005 Ex003
Eurocode
Wide Flange Section Under Combined Compression & Bending
Results Published in the Current Verification Examples
Output Percent
Parameter SAP2000 Independent Difference
Compactness Class 2 Class 2 0.00%
Npl,Rd (kN) 2937.5 2937.5 0.00%
Mpl,y,Rd (kN-m) 524.1 524.5 -0.08%
Mn,y,Rd (kN-m) 341.9 342.2 -0.09%
Results From Current Analyses
Number of Decimal Result for % Diff From
SAP2000 Result Places Comparison Version 19.0.0
- 0.0 Not Checked
1 0.0 Not Checked
1 0.0 Not Checked
1 0.0 Not Checked
#VALUE!
Example IS 800-2007 Ex001
Indian
Wide Flange Member Under Compression
Results Published in the Current Verification Examples
Output Percent
Parameter SAP2000 Independent Difference
Compactness Plastic Plastic 0.00%
Pd (kN) 733.85 734.07 -0.03%
Results From Current Analyses
Number of Decimal Result for % Diff From
SAP2000 Result Places Comparison Version 19.0.0
- 0.0 Not Checked
2 0.00 Not Checked
#VALUE!
Example IS 800-2007 Ex002
Indian
Wide Flange Member Under Bending
Results Published in the Current Verification Examples Results From Current Analyses #VALUE!
Output Percent Number of Decimal Result for % Diff From
Parameter SAP2000 Independent Difference SAP2000 Result Places Comparison Version 19.0.0
Compactness Plastic Plastic 0.00% - 0 Not Checked
Msd (kN-m) 152.71 152.97 -0.17% 2 0.00 Not Checked
Vd (kN) 603.59 603.59 0.00% 2 0.00 Not Checked

`
Example IS 800-2007 Ex003
Indian
Wide Flange Member Under Combined Compression & Biaxial Bending
Results Published in the Current Verification Examples Results From Current Analyses #VALUE!
Output Percent Number of Decimal Result for % Diff From
Parameter SAP2000 Independent Difference SAP2000 Result Places Comparison Version 19.0.0
Compactness Plastic Plastic 0.00% - 0 Not Checked
Nd (kN) 6564 6564 0.00% 0 0 Not Checked
Pd,z (kN) 6555 6555 0.00% 0 0 Not Checked
Pd,y (kN) 5324.01 5324.01 0.00% 2 0.00 Not Checked
Mdz (kN-m) 897.46 897.46 0.00% 2 0.00 Not Checked
Mdy (kN-m) 325.72 325.72 0.00% 2 0.00 Not Checked
MdLTB (kN-m) 886.76 886.76 0.00% 2 0.00 Not Checked
VPz (kN) 1009.2 1009.2 0.00% 1 0.0 Not Checked
VPy (kN) 2961.6 2961.6 0.00% 1 0.0 Not Checked
D/C Ratio 1.048 1.048 0.00% 3 0.000 Not Checked
Example NTC 2008 Ex001
Italian
Wide Flange Section Under Combined Compression & Bending
Results Published in the Current Verification Examples
Output Percent
Parameter SAP2000 Independent Difference
Section Class 2 Class 2 0.00%
Nc,Rd (N) 2797619 2797619 0.00%
Vc,Rd,y (N) 719157 719157 0.00%
Mc,y,Rd (N-m) 499095 499095 0.00%
MV,y,Rd (N-m) 481276 481276 0.00%
MN,y,Rd (N-m) 310772 310772 0.00%
D/CRatio 0.741 0.741 0.00%
Results From Current Analyses
Number of Decimal Result for % Diff From
SAP2000 Result Places Comparison Version 19.0.0
- 0.0 Not Checked
0 0 Not Checked
0 0 Not Checked
0 0 Not Checked
0 0 Not Checked
0 0 Not Checked
3 0.000 Not Checked
#VALUE!
Example NTC 2008 Ex002
Italian
Wide Flange Member Under Combined Compression & Bending
Results Published in the Current Verification Examples
Output Percent
Parameter SAP2000 Independent Difference
Section Class 2 Class 2 0.00%
Nc,Rd (N) 2797619 2797619 0.00%
Vc,Rd,y (N) 719157 719157 0.00%
Vc,Rd,z (N) 984733 984733 0.00%
Mc,y,Rd (N-mm) 499095238 499095238 0.00%
Mc,z,Rd (N-mm) 84823810 84823810 0.00%
MV,y,Rd (N-mm) 481275859 481275859 0.00%
MN,y,Rd (N-mm) 310771539 310771539 0.00%
MN,z,Rd (N-mm) 82263377 82263377 0.00%
Nbyy,Rd (N) 2797619 2797619 0.00%
Nbzz,Rd (N) 2797619 2797619 0.00%
Mb,Rd (N-mm) 499095238 499095238 0.00%
D/CRatio 2.044 2.044 0.00%
Results From Current Analyses
Number of Decimal Result for % Diff From
SAP2000 Result Places Comparison Version 19.0.0
- 0.0 Not Checked
0 0 Not Checked
0 0 Not Checked
0 0 Not Checked
0 0 Not Checked
0 0 Not Checked
0 0 Not Checked
0 0 Not Checked
0 0 Not Checked
0 0 Not Checked
0 0 Not Checked
0 0 Not Checked
3 0.000 Not Checked
#VALUE!
Example KBC 2009 Ex001
Korean
Wide Flange Member Under Bending
Results Published in the Current Verification Examples
Output Percent
Case Parameter SAP2000 Independent Difference
Compactness Compact Compact 0.00%
Cb 1.003 1.002 0.10%
Lb = 1.75 m
φbMn (kN-m) 515.430 515.430 0.00%
Cb 1.015 1.014 0.10%
Lb = 4 m
φbMn (kN-m) 394.6 394.200 0.10%
Cb 1.136 1.136 0.00%
Lb = 12 m
φbMn (kN-m) 113.19 113.450 -0.23%
Results From Current Analyses
Number of Decimal Result for % Diff From
SAP2000 Result Places Comparison Version 19.0.0
- 0.0 Not Checked
3 0.000 Not Checked
2 0.00 Not Checked
3 0.000 Not Checked
1 0.0 Not Checked
3 0.000 Not Checked
2 0.00 Not Checked
#VALUE!
Example KBC 2009 Ex002
Korean
Built Up Wide Flange Member Under Compression
Results Published in the Current Verification Examples
Output Percent
Parameter SAP2000 Independent Difference
Compactness Slender Slender 0.00%
φcPn (kN) 2056.7 2056.7 0.00%
Results From Current Analyses
Number of Decimal Result for % Diff From
SAP2000 Result Places Comparison Version 19.0.0
Slender - Slender 0.0000%
2056.692 1 2056.7 0.0000%
#VALUE!
Example NZS 3404-1997 Ex001
New Zealand
Wide Flange Member Under Compression
Results Published in the Current Verification Examples Results From Current Analyses #VALUE!
Output Percent Number of Decimal Result for % Diff From
Parameter SAP2000 Independent Difference SAP2000 Result Places Comparison Version 19.0.0
Compactness Compact Compact 0.00% - 0.0 Not Checked
Ns (kN) 6275 6275 0.00% 0 0 Not Checked
Nc (kN) 4385 4385 0.00% 0 0 Not Checked
Example NZS 3404-1997 Ex002
New Zealand
Wide Flange Member Under Bending
Results Published in the Current Verification Examples
Output Percent
Parameter SAP2000 Independent Difference
Compactness Compact Compact 0.00%
Msx (kN-m) 837.5 837.5 0.00%
Mb (kN-m) 837.5 837.5 0.00%
Results From Current Analyses
Number of Decimal Result for % Diff From
SAP2000 Result Places Comparison Version 19.0.0
- 0.0 Not Checked
1 0.0 Not Checked
1 0.0 Not Checked
#VALUE!
Example NZS 3404-1997 Ex003
New Zealand
Wide Flange Member Under Combined Compression & Bending
Results Published in the Current Verification Examples
Output Percent
Parameter SAP2000 Independent Difference
Compactness Compact Compact 0.00%
Mrx (kN-m) 837.5 837.5 0.00%
Mix (kN-m) 823.1 823.1 0.00%
Mo (kN-m) 837.5 837.5 0.00%
Results From Current Analyses
Number of Decimal Result for % Diff From
SAP2000 Result Places Comparison Version 19.0.0
- 0.0 Not Checked
1 0.0 Not Checked
1 0.0 Not Checked
1 0.0 Not Checked
#VALUE!