OsmoSTP VTY Reference i

OsmoSTP VTY Reference

OsmoSTP VTY Reference ii

Copyright © 2012-2017

This work is copyright by sysmocom - s.f.m.c. GmbH. All rights reserved.

OsmoSTP VTY Reference iii

COLLABORATORS

TITLE :

OsmoSTP VTY Reference

ACTION NAME DATE SIGNATURE

WRITTEN BY August 1, 2020

REVISION HISTORY

NUMBER DATE DESCRIPTION NAME

v1 April 16, 2017 Initial h2

OsmoSTP VTY Reference iv

Contents

1 VTY reference 1
1.1 Common Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
1.1.1 end . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
1.1.2 exit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
1.1.3 help . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
1.1.4 list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
1.1.5 show running-config . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
1.1.6 write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
1.1.7 write file . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
1.1.8 write memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
1.1.9 write terminal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
1.2 view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
1.2.1 enable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
1.2.2 logging color (0|1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
1.2.3 logging disable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
1.2.4 logging enable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
1.2.5 logging filter all (0|1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
1.2.6 logging level (lglobal|llapd|linp|lmux|lmi|lmib|lsms|lctrl|lgtp|lstats|lgsup|loa... . . . . . . . . . . . . . . . 6
1.2.7 logging level force-all (debug|info|notice|error|fatal) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
1.2.8 logging level set-all (debug|info|notice|error|fatal) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
1.2.9 logging print category (0|1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
1.2.10 logging print category-hex (0|1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
1.2.11 logging print extended-timestamp (0|1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
1.2.12 logging print file (0|1|basename) [last] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
1.2.13 logging print level (0|1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
1.2.14 logging set-log-mask MASK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
1.2.15 logging timestamp (0|1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
1.2.16 no logging level force-all . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
1.2.17 show alarms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
1.2.18 show asciidoc counters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
OsmoSTP VTY Reference v

1.2.19 show cs7 (sua|m3ua|ipa) [<0-65534>] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

1.2.20 show cs7 instance <0-15> as (active|all|m3ua|sua) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
1.2.21 show cs7 instance <0-15> asp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
1.2.22 show cs7 instance <0-15> route . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
1.2.23 show cs7 instance <0-15> sccp addressbook . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
1.2.24 show cs7 instance <0-15> sccp connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
1.2.25 show cs7 instance <0-15> sccp ssn <0-65535> . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
1.2.26 show cs7 instance <0-15> sccp timers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
1.2.27 show cs7 instance <0-15> sccp users . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
1.2.28 show cs7 instance <0-15> users . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
1.2.29 show fsm NAME . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
1.2.30 show fsm all . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
1.2.31 show fsm-instances NAME . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
1.2.32 show fsm-instances all . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
1.2.33 show history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
1.2.34 show logging vty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
1.2.35 show online-help . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
1.2.36 show rate-counters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
1.2.37 show stats . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
1.2.38 show stats level (global|peer|subscriber) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
1.2.39 show talloc-context (application|all) (full|brief|DEPTH) . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
1.2.40 show talloc-context (application|all) (full|brief|DEPTH) filter REGEXP . . . . . . . . . . . . . . . . . . 21
1.2.41 show talloc-context (application|all) (full|brief|DEPTH) tree ADDRESS . . . . . . . . . . . . . . . . . . 22
1.2.42 show version . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
1.2.43 terminal length <0-512> . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
1.2.44 terminal no length . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
1.2.45 who . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
1.3 enable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
1.3.1 configure terminal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
1.3.2 copy running-config startup-config . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
1.3.3 disable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
1.3.4 logging color (0|1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
1.3.5 logging disable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
1.3.6 logging enable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
1.3.7 logging filter all (0|1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
1.3.8 logging level (lglobal|llapd|linp|lmux|lmi|lmib|lsms|lctrl|lgtp|lstats|lgsup|loa... . . . . . . . . . . . . . . . 26
1.3.9 logging level force-all (debug|info|notice|error|fatal) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
1.3.10 logging level set-all (debug|info|notice|error|fatal) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
1.3.11 logging print category (0|1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
OsmoSTP VTY Reference vi

1.3.12 logging print category-hex (0|1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

1.3.13 logging print extended-timestamp (0|1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
1.3.14 logging print file (0|1|basename) [last] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
1.3.15 logging print level (0|1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
1.3.16 logging set-log-mask MASK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
1.3.17 logging timestamp (0|1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
1.3.18 no logging level force-all . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
1.3.19 show alarms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
1.3.20 show asciidoc counters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
1.3.21 show cs7 (sua|m3ua|ipa) [<0-65534>] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
1.3.22 show cs7 instance <0-15> as (active|all|m3ua|sua) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
1.3.23 show cs7 instance <0-15> asp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
1.3.24 show cs7 instance <0-15> route . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
1.3.25 show cs7 instance <0-15> sccp addressbook . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
1.3.26 show cs7 instance <0-15> sccp connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
1.3.27 show cs7 instance <0-15> sccp ssn <0-65535> . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
1.3.28 show cs7 instance <0-15> sccp timers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
1.3.29 show cs7 instance <0-15> sccp users . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
1.3.30 show cs7 instance <0-15> users . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
1.3.31 show fsm NAME . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
1.3.32 show fsm all . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
1.3.33 show fsm-instances NAME . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
1.3.34 show fsm-instances all . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
1.3.35 show history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
1.3.36 show logging vty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
1.3.37 show online-help . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
1.3.38 show rate-counters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
1.3.39 show startup-config . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
1.3.40 show stats . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
1.3.41 show stats level (global|peer|subscriber) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
1.3.42 show talloc-context (application|all) (full|brief|DEPTH) . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
1.3.43 show talloc-context (application|all) (full|brief|DEPTH) filter REGEXP . . . . . . . . . . . . . . . . . . 42
1.3.44 show talloc-context (application|all) (full|brief|DEPTH) tree ADDRESS . . . . . . . . . . . . . . . . . . 43
1.3.45 show version . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
1.3.46 terminal length <0-512> . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
1.3.47 terminal monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
1.3.48 terminal no length . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
1.3.49 terminal no monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
1.3.50 who . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
OsmoSTP VTY Reference vii

1.4 config . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
1.4.1 banner motd default . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
1.4.2 banner motd file [FILE] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
1.4.3 cs7 instance <0-15> . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
1.4.4 enable password (8|) WORD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
1.4.5 enable password LINE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
1.4.6 hostname WORD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
1.4.7 line vty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
1.4.8 log alarms <2-32700> . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
1.4.9 log file .FILENAME . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
1.4.10 log gsmtap [HOSTNAME] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
1.4.11 log stderr . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
1.4.12 log syslog (authpriv|cron|daemon|ftp|lpr|mail|news|user|uucp) . . . . . . . . . . . . . . . . . . . . . . . . 49
1.4.13 log syslog local <0-7> . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
1.4.14 no banner motd . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
1.4.15 no enable password . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
1.4.16 no hostname [HOSTNAME] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
1.4.17 no log alarms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
1.4.18 no log file .FILENAME . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
1.4.19 no log stderr . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
1.4.20 no log syslog . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
1.4.21 no service advanced-vty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
1.4.22 no service terminal-length [<0-512>] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
1.4.23 no stats reporter log . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
1.4.24 no stats reporter statsd . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
1.4.25 password (8|) WORD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
1.4.26 password LINE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
1.4.27 service advanced-vty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
1.4.28 service terminal-length <0-512> . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
1.4.29 show history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
1.4.30 stats interval <1-65535> . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
1.4.31 stats reporter log . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
1.4.32 stats reporter statsd . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
1.5 config-log . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
1.5.1 logging color (0|1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
1.5.2 logging filter all (0|1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
1.5.3 logging level (lglobal|llapd|linp|lmux|lmi|lmib|lsms|lctrl|lgtp|lstats|lgsup|loa... . . . . . . . . . . . . . . . 57
1.5.4 logging level force-all (debug|info|notice|error|fatal) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
1.5.5 logging level set-all (debug|info|notice|error|fatal) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
OsmoSTP VTY Reference viii

1.5.6 logging print category (0|1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60

1.5.7 logging print category-hex (0|1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
1.5.8 logging print extended-timestamp (0|1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
1.5.9 logging print file (0|1|basename) [last] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
1.5.10 logging print level (0|1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
1.5.11 logging timestamp (0|1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
1.5.12 no logging level force-all . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
1.6 config-stats . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
1.6.1 disable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
1.6.2 enable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
1.6.3 level (global|peer|subscriber) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
1.6.4 local-ip ADDR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
1.6.5 mtu <100-65535> . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
1.6.6 no local-ip . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
1.6.7 no mtu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
1.6.8 no prefix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
1.6.9 prefix PREFIX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
1.6.10 remote-ip ADDR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
1.6.11 remote-port <1-65535> . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
1.7 config-line . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
1.7.1 bind A.B.C.D [<0-65535>] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
1.7.2 login . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
1.7.3 no login . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
1.8 config-cs7 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
1.8.1 as NAME (sua|m3ua|ipa) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
1.8.2 asp NAME <0-65535> <0-65535> (sua|m3ua|ipa) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
1.8.3 description .TEXT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
1.8.4 listen (sua|m3ua|ipa) <0-65534> . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
1.8.5 network-indicator (international | national | reserved | spare) . . . . . . . . . . . . . . . . . . . . . . . . 69
1.8.6 no as NAME . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
1.8.7 no asp NAME . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
1.8.8 no listen (sua|m3ua|ipa) <0-65534> . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
1.8.9 no sccp-address NAME . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
1.8.10 point-code POINT_CODE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
1.8.11 point-code delimiter (default|dash) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
1.8.12 point-code format <1-24> [<1-23>] [<1-22>] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
1.8.13 point-code format default . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
1.8.14 route-table system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
1.8.15 sccp-address NAME . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
OsmoSTP VTY Reference ix

1.8.16 sccp-timer (conn_est|ias|iar|rel|repeat_rel|int|guard|reset|reassembly) <1-99999... . . . . . . . . . . . . . 73

1.8.17 xua rkm routing-key-allocation (static-only|dynamic-permitted) . . . . . . . . . . . . . . . . . . . . . . 74
1.9 config-cs7-as . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
1.9.1 asp NAME . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
1.9.2 description .TEXT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
1.9.3 no asp NAME . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
1.9.4 point-code override dpc PC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
1.9.5 qos-class <0-255> . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
1.9.6 recovery-timeout <1-2000> . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
1.9.7 routing-key RCONTEXT DPC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
1.9.8 routing-key RCONTEXT DPC si (aal2|bicc|b-isup|h248|isup|sat-isup|sccp|tup) . . . . . . . . . . . . . . 77
1.9.9 routing-key RCONTEXT DPC si (aal2|bicc|b-isup|h248|isup|sat-isup|sccp|tup) ssn S... . . . . . . . . . . 78
1.9.10 routing-key RCONTEXT DPC ssn SSN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
1.9.11 traffic-mode (broadcast | loadshare | roundrobin | override) . . . . . . . . . . . . . . . . . . . . . . . . . 79
1.10 config-cs7-asp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
1.10.1 block . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
1.10.2 description .TEXT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
1.10.3 local-ip A.B.C.D . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
1.10.4 qos-class <0-255> . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
1.10.5 remote-ip A.B.C.D . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81
1.10.6 shutdown . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81
1.11 config-cs7-listen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81
1.11.1 accept-asp-connections (pre-configured|dynamic-permitted) . . . . . . . . . . . . . . . . . . . . . . . . 81
1.11.2 local-ip A.B.C.D . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
1.12 config-cs7-rt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
1.12.1 description .TEXT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
1.12.2 remove route POINT_CODE MASK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
1.12.3 update route POINT_CODE MASK linkset LS_NAME [priority PRIO] [qos-class (CLASS|d... . . . . . 83
1.13 config-cs7-sccpaddr . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
1.13.1 global-title . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
1.13.2 no global-title . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
1.13.3 no point-code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
1.13.4 no subsystem-number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
1.13.5 point-code POINT_CODE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
1.13.6 routing-indicator (GT|PC|IP) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85
1.13.7 subsystem-number <0-4294967295> . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85
1.14 config-cs7-sccpaddr-gt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85
1.14.1 digits DIGITS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85
1.14.2 global-title-indicator <0-15> . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86
1.14.3 nature-of-address-indicator <0-127> . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86
1.14.4 numbering-plan-indicator <0-15> . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86
1.14.5 translation-type <0-255> . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86
OsmoSTP VTY Reference x

List of Tables

1.1 VTY Parameter Patterns . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

1.2 VTY port numbers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
OsmoSTP VTY Reference 1 / 86

Chapter 1

VTY reference

The Virtual Tele Type (VTY) has the concept of nodes and commands. This chapter lists all nodes and the commands that are
available within the node. Each command can consist out of several words followed by a variable number of parameters. There
are common patterns for the parameters, these include IPv4 addresses, number ranges, a word, a line of text and choice. The
following will explain the commonly used patterns.

Pattern Example Explanation

A.B.C.D 127.0.0.1 A IPv4 address
TEXT example01 A single string without any spaces, tabs
.TEXT Some information A line of text
(OptionA|OptionB|OptionC) OptionA A choice between a list of available options
<0-10> 5 A number from a range

Table 1.1: VTY Parameter Patterns

The application is configured through the VTY. For configuring a system one needs to enter the enable node and then enter the
configure terminal command. Then the configuration can be made according to the available commands. After the system has
been configured one can use the write command to write the new configuration to the configuration file. The new file will be
used after the application has been restarted.
The following table lists the TCP port numbers of the VTY for the various Osmocom GSM related programs as used on sysmocom
products:

Port Number Software

4240 osmo-pcu
4241 osmo-bts
4242 osmo-nitb, osmo-bsc
4243 osmo-bsc_mgcp
4244 osmo-bsc_nat
4245 osmo-sgsn
4246 osmo-gbproxy

Table 1.2: VTY port numbers

1.1 Common Commands

These commands are available on all VTY nodes. They are listed here only once, to unclutter the VTY reference.
OsmoSTP VTY Reference 2 / 86

1.1.1 end

Command
end

Parameters

end
End current mode and change to enable mode.

1.1.2 exit

Command
exit

Parameters

exit
Exit current mode and down to previous mode

1.1.3 help

Command
help

Parameters
help
Description of the interactive help system

1.1.4 list

Command
list

Parameters
list
Print command list
OsmoSTP VTY Reference 3 / 86

1.1.5 show running-config

Command
show running-config

Parameters
show
Show running system information
running-config
running configuration

1.1.6 write

Command
write

Parameters
write
Write running configuration to memory, network, or terminal

1.1.7 write file

Command
write file

Parameters
write
Write running configuration to memory, network, or terminal
file
Write to configuration file

1.1.8 write memory

Command
write memory

Parameters
write
Write running configuration to memory, network, or terminal
memory
Write configuration to the file (same as write file)
OsmoSTP VTY Reference 4 / 86

1.1.9 write terminal

Command
write terminal

Parameters
write
Write running configuration to memory, network, or terminal
terminal
Write to terminal

1.2 view

The view node is the default node when connecting to the VTY interface. This node does not require any additional permission
and allows to introspect the application.

1.2.1 enable

Command
enable

Parameters
enable
Turn on privileged mode command

1.2.2 logging color (0|1)

Command
logging color (0|1)

Parameters
logging
Configure logging
color
Configure color-printing for log messages
0
Don’t use color for printing messages
1
Use color for printing messages
OsmoSTP VTY Reference 5 / 86

1.2.3 logging disable

Command
logging disable

Parameters
logging
Configure logging
disable
Disables logging to this vty

1.2.4 logging enable

This command is required to make logging commands available on the telnet VTY.

Command
logging enable

Parameters
logging
Configure logging
enable
Enables logging to this vty

1.2.5 logging filter all (0|1)

Disable/enable general log output on a given target. Typically, ’logging filter all 1’ allows to see the usual log output on a given
target. Setting to ’0’ can be useful when logging to the telnet VTY console: mute all log output to allow typing VTY commands
on the telnet prompt without interference from log output; ’logging filter all 1’ then re-enables logging in the same log output
configuration as before. Some applications provide more specific filters, e.g. to log a given IMSI only. To employ such filters,
set ’logging filter all 0’ to disable general logging, and then enable a more specific filter instead.

Command
logging filter all (0|1)

Parameters
logging
Configure logging
filter
Filter log messages
all
Do you want to log all messages?
0
Only print messages matched by other filters
1
Bypass filter and print all messages
OsmoSTP VTY Reference 6 / 86

1.2.6 logging level (lglobal|llapd|linp|lmux|lmi|lmib|lsms|lctrl|lgtp|lstats|lgsup|loa...

Command
logging level (lglobal|llapd|linp|lmux|lmi|lmib|lsms|lctrl|lgtp|lstats|lgsup|loap|lss7| ←-
lsccp|lsua|lm3ua|lmgcp|ljibuf|lrspro) (debug|info|notice|error|fatal)

Parameters
logging
Configure logging
level
Set the log level for a specified category
lglobal
Library-internal global log family
llapd
LAPD in libosmogsm
linp
A-bis Intput Subsystem
lmux
A-bis B-Subchannel TRAU Frame Multiplex
lmi
A-bis Input Driver for Signalling
lmib
A-bis Input Driver for B-Channels (voice)
lsms
Layer3 Short Message Service (SMS)
lctrl
Control Interface
lgtp
GPRS GTP library
lstats
Statistics messages and logging
lgsup
Generic Subscriber Update Protocol
loap
Osmocom Authentication Protocol
lss7
libosmo-sigtran Signalling System 7
lsccp
libosmo-sigtran SCCP Implementation
OsmoSTP VTY Reference 7 / 86

lsua
libosmo-sigtran SCCP User Adaptation
lm3ua
libosmo-sigtran MTP3 User Adaptation
lmgcp
libosmo-mgcp Media Gateway Control Protocol
ljibuf
libosmo-netif Jitter Buffer
lrspro
Remote SIM protocol
debug
Log debug messages and higher levels
info
Log informational messages and higher levels
notice
Log noticeable messages and higher levels
error
Log error messages and higher levels
fatal
Log only fatal messages

1.2.7 logging level force-all (debug|info|notice|error|fatal)

Command
logging level force-all (debug|info|notice|error|fatal)

Parameters
logging
Configure logging

level
Set the log level for a specified category
force-all
Globally force all logging categories to a specific level. This is released by the ’no logging level force-all’ command. Note:
any ’logging level <category> <level>’ commands will have no visible effect after this, until the forced level is released.
debug
Log debug messages and higher levels
info
Log informational messages and higher levels
OsmoSTP VTY Reference 8 / 86

notice
Log noticeable messages and higher levels
error
Log error messages and higher levels
fatal
Log only fatal messages

1.2.8 logging level set-all (debug|info|notice|error|fatal)

Command
logging level set-all (debug|info|notice|error|fatal)

Parameters
logging
Configure logging
level
Set the log level for a specified category
set-all
Once-off set all categories to the given log level. There is no single command to take back these changes -- each category
is set to the given level, period.
debug
Log debug messages and higher levels
info
Log informational messages and higher levels
notice
Log noticeable messages and higher levels
error
Log error messages and higher levels
fatal
Log only fatal messages

1.2.9 logging print category (0|1)

Command
logging print category (0|1)

Parameters
logging
Configure logging
OsmoSTP VTY Reference 9 / 86

print
Log output settings
category
Configure log message
0
Don’t prefix each log message
1
Prefix each log message with category/subsystem name

1.2.10 logging print category-hex (0|1)

Command
logging print category-hex (0|1)

Parameters
logging
Configure logging
print
Log output settings
category-hex
Configure log message
0
Don’t prefix each log message
1
Prefix each log message with category/subsystem nr in hex (’<000b>’)

1.2.11 logging print extended-timestamp (0|1)

Command
logging print extended-timestamp (0|1)

Parameters
logging
Configure logging
print
Log output settings
extended-timestamp
Configure log message timestamping
0
Don’t prefix each log message
1
Prefix each log message with current timestamp with YYYYMMDDhhmmssnnn
OsmoSTP VTY Reference 10 / 86

1.2.12 logging print file (0|1|basename) [last]

Command
logging print file (0|1|basename) [last]

Parameters

logging
Configure logging
print
Log output settings

file
Configure log message
0
Don’t prefix each log message

1
Prefix each log message with the source file and line
basename
Prefix each log message with the source file’s basename (strip leading paths) and line

[last]
Log source file info at the end of a log line. If omitted, log source file info just before the log text.

1.2.13 logging print level (0|1)

Command
logging print level (0|1)

Parameters

logging
Configure logging
print
Log output settings

level
Configure log message
0
Don’t prefix each log message

1
Prefix each log message with the log level name
OsmoSTP VTY Reference 11 / 86

1.2.14 logging set-log-mask MASK

Command
logging set-log-mask MASK

Parameters
logging
Configure logging
set-log-mask
Set the logmask of this logging target
MASK
List of logging categories to log, e.g. ’abc:mno:xyz’. Available log categories depend on the specific application, refer to
the ’logging level’ command. Optionally add individual log levels like ’abc,1:mno,3:xyz,5’, where the level numbers are
LOGL_DEBUG=1 LOGL_INFO=3 LOGL_NOTICE=5 LOGL_ERROR=7 LOGL_FATAL=8

1.2.15 logging timestamp (0|1)

Command
logging timestamp (0|1)

Parameters
logging
Configure logging
timestamp
Configure log message timestamping
0
Don’t prefix each log message
1
Prefix each log message with current timestamp

1.2.16 no logging level force-all

Command
no logging level force-all

Parameters
no
Negate a command or set its defaults
logging
Configure logging
level
Set the log level for a specified category
force-all
Release any globally forced log level set with ’logging level force-all <level>’
OsmoSTP VTY Reference 12 / 86

1.2.17 show alarms

Command
show alarms

Parameters
show
Show running system information
alarms
Show current logging configuration

1.2.18 show asciidoc counters

Command
show asciidoc counters

Parameters
show
Show running system information
asciidoc
Asciidoc generation
counters
Generate table of all registered counters

1.2.19 show cs7 (sua|m3ua|ipa) [<0-65534>]

Command
show cs7 (sua|m3ua|ipa) [<0-65534>]

Parameters
show
Show running system information
cs7
ITU-T Signaling System 7
sua
SCCP User Adaptation
m3ua
MTP3 User Adaptation
ipa
IPA Multiplex (SCCP Lite)
[<0-65534>]
Port Number
OsmoSTP VTY Reference 13 / 86

1.2.20 show cs7 instance <0-15> as (active|all|m3ua|sua)

Command
show cs7 instance <0-15> as (active|all|m3ua|sua)

Parameters
show
Show running system information
cs7
ITU-T Signaling System 7
instance
An instance of the SS7 stack
<0-15>
An instance of the SS7 stack
as
Application Server (AS)
active
Display all active ASs
all
Display all ASs (default)
m3ua
Display all m3ua ASs
sua
Display all SUA ASs

1.2.21 show cs7 instance <0-15> asp

Command
show cs7 instance <0-15> asp

Parameters
show
Show running system information
cs7
ITU-T Signaling System 7
instance
An instance of the SS7 stack
<0-15>
An instance of the SS7 stack
asp
Application Server Process (ASP)
OsmoSTP VTY Reference 14 / 86

1.2.22 show cs7 instance <0-15> route

Command
show cs7 instance <0-15> route

Parameters

show
Show running system information
cs7
ITU-T Signaling System 7

instance
An instance of the SS7 stack
<0-15>
An instance of the SS7 stack

route
Routing Table

1.2.23 show cs7 instance <0-15> sccp addressbook

Command
show cs7 instance <0-15> sccp addressbook

Parameters

show
Show running system information
cs7
ITU-T Signaling System 7

instance
An instance of the SS7 stack
<0-15>
An instance of the SS7 stack

sccp
Signalling Connection Control Part
addressbook
List all SCCP addressbook entries
OsmoSTP VTY Reference 15 / 86

1.2.24 show cs7 instance <0-15> sccp connections

Command
show cs7 instance <0-15> sccp connections

Parameters
show
Show running system information
cs7
ITU-T Signaling System 7
instance
An instance of the SS7 stack
<0-15>
An instance of the SS7 stack
sccp
Signalling Connection Control Part
connections
Show List of active SCCP connections

1.2.25 show cs7 instance <0-15> sccp ssn <0-65535>

Command
show cs7 instance <0-15> sccp ssn <0-65535>

Parameters
show
Show running system information
cs7
ITU-T Signaling System 7
instance
An instance of the SS7 stack
<0-15>
An instance of the SS7 stack
sccp
Signalling Connection Control Part
ssn
Find an SCCP User registered for the given SSN
<0-65535>
Subsystem Number (SSN)
OsmoSTP VTY Reference 16 / 86

1.2.26 show cs7 instance <0-15> sccp timers

Command
show cs7 instance <0-15> sccp timers

Parameters

show
Show running system information
cs7
ITU-T Signaling System 7

instance
An instance of the SS7 stack
<0-15>
An instance of the SS7 stack

sccp
Signaling Connection Control Part
timers
Show List of SCCP timers

1.2.27 show cs7 instance <0-15> sccp users

Command
show cs7 instance <0-15> sccp users

Parameters
show
Show running system information

cs7
ITU-T Signaling System 7
instance
An instance of the SS7 stack

<0-15>
An instance of the SS7 stack
sccp
Signalling Connection Control Part

users
Show List of SCCP Users registered
OsmoSTP VTY Reference 17 / 86

1.2.28 show cs7 instance <0-15> users

Command
show cs7 instance <0-15> users

Parameters
show
Show running system information
cs7
ITU-T Signaling System 7
instance
An instance of the SS7 stack
<0-15>
An instance of the SS7 stack
users
User Table

1.2.29 show fsm NAME

Command
show fsm NAME

Parameters
show
Show running system information
fsm
Show information about finite state machines
NAME
Display information about a single named finite state machine

1.2.30 show fsm all

Command
show fsm all

Parameters
show
Show running system information
fsm
Show information about finite state machines
all
Display a list of all registered finite state machines
OsmoSTP VTY Reference 18 / 86

1.2.31 show fsm-instances NAME

Command
show fsm-instances NAME

Parameters

show
Show running system information
fsm-instances
Show information about finite state machine instances

NAME
Display a list of all FSM instances of the named finite state machine

1.2.32 show fsm-instances all

Command
show fsm-instances all

Parameters

show
Show running system information
fsm-instances
Show information about finite state machine instances

all
Display a list of all FSM instances of all finite state machine

1.2.33 show history

Command
show history

Parameters
show
Show running system information
history
Display the session command history
OsmoSTP VTY Reference 19 / 86

1.2.34 show logging vty

Command
show logging vty

Parameters

show
Show running system information
logging
Show current logging configuration

vty
Show current logging configuration for this vty

1.2.35 show online-help

Command
show online-help

Parameters

show
Show running system information
online-help
Online help

1.2.36 show rate-counters

Command
show rate-counters

Parameters
show
Show running system information
rate-counters
Show all rate counters
OsmoSTP VTY Reference 20 / 86

1.2.37 show stats

Command
show stats

Parameters

show
Show running system information
stats
Show statistical values

1.2.38 show stats level (global|peer|subscriber)

Command
show stats level (global|peer|subscriber)

Parameters
show
Show running system information

stats
Show statistical values
level
Set the maximum group level

global
Show global groups only
peer
Show global and network peer related groups

subscriber
Show global, peer, and subscriber groups

1.2.39 show talloc-context (application|all) (full|brief|DEPTH)

Command
show talloc-context (application|all) (full|brief|DEPTH)

Parameters
show
Show running system information
OsmoSTP VTY Reference 21 / 86

talloc-context
Show talloc memory hierarchy
application
Application’s context
all
All contexts, if NULL-context tracking is enabled
full
Display a full talloc memory hierarchy
brief
Display a brief talloc memory hierarchy
DEPTH
Specify required maximal depth value

1.2.40 show talloc-context (application|all) (full|brief|DEPTH) filter REGEXP

Command
show talloc-context (application|all) (full|brief|DEPTH) filter REGEXP

Parameters
show
Show running system information

talloc-context
Show talloc memory hierarchy
application
Application’s context

all
All contexts, if NULL-context tracking is enabled
full
Display a full talloc memory hierarchy

brief
Display a brief talloc memory hierarchy
DEPTH
Specify required maximal depth value

filter
Filter chunks using regular expression
REGEXP
Regular expression
OsmoSTP VTY Reference 22 / 86

1.2.41 show talloc-context (application|all) (full|brief|DEPTH) tree ADDRESS

Command
show talloc-context (application|all) (full|brief|DEPTH) tree ADDRESS

Parameters

show
Show running system information
talloc-context
Show talloc memory hierarchy

application
Application’s context
all
All contexts, if NULL-context tracking is enabled

full
Display a full talloc memory hierarchy
brief
Display a brief talloc memory hierarchy

DEPTH
Specify required maximal depth value
tree
Display only a specific memory chunk

ADDRESS
Chunk address (e.g. 0xdeadbeef)

1.2.42 show version

Command
show version

Parameters

show
Show running system information
version
Displays program version
OsmoSTP VTY Reference 23 / 86

1.2.43 terminal length <0-512>

Command
terminal length <0-512>

Parameters
terminal
Set terminal line parameters
length
Set number of lines on a screen
<0-512>
Number of lines on screen (0 for no pausing)

1.2.44 terminal no length

Command
terminal no length

Parameters
terminal
Set terminal line parameters
no
Negate a command or set its defaults
length
Set number of lines on a screen

1.2.45 who

Command
who

Parameters
who
Display who is on vty

1.3 enable

The enable node is a privileged node, allowing to make changes to the configuration and to access further commands like
’configure’. All commands seen on the view node are also available here.
OsmoSTP VTY Reference 24 / 86

1.3.1 configure terminal

Command
configure terminal

Parameters

configure
Configuration from vty interface
terminal
Configuration terminal

1.3.2 copy running-config startup-config

Command
copy running-config startup-config

Parameters
copy
Copy configuration

running-config
Copy running config to...
startup-config
Copy running config to startup config (same as write file)

1.3.3 disable

Command
disable

Parameters
disable
Turn off privileged mode command
OsmoSTP VTY Reference 25 / 86

1.3.4 logging color (0|1)

Command
logging color (0|1)

Parameters

logging
Configure logging
color
Configure color-printing for log messages

0
Don’t use color for printing messages
1
Use color for printing messages

1.3.5 logging disable

Command
logging disable

Parameters
logging
Configure logging

disable
Disables logging to this vty

1.3.6 logging enable

This command is required to make logging commands available on the telnet VTY.

Command
logging enable

Parameters
logging
Configure logging

enable
Enables logging to this vty
OsmoSTP VTY Reference 26 / 86

1.3.7 logging filter all (0|1)

Disable/enable general log output on a given target. Typically, ’logging filter all 1’ allows to see the usual log output on a given
target. Setting to ’0’ can be useful when logging to the telnet VTY console: mute all log output to allow typing VTY commands
on the telnet prompt without interference from log output; ’logging filter all 1’ then re-enables logging in the same log output
configuration as before. Some applications provide more specific filters, e.g. to log a given IMSI only. To employ such filters,
set ’logging filter all 0’ to disable general logging, and then enable a more specific filter instead.

Command
logging filter all (0|1)

Parameters
logging
Configure logging

filter
Filter log messages
all
Do you want to log all messages?

0
Only print messages matched by other filters
1
Bypass filter and print all messages

1.3.8 logging level (lglobal|llapd|linp|lmux|lmi|lmib|lsms|lctrl|lgtp|lstats|lgsup|loa...

Command
logging level (lglobal|llapd|linp|lmux|lmi|lmib|lsms|lctrl|lgtp|lstats|lgsup|loap|lss7| ←-
lsccp|lsua|lm3ua|lmgcp|ljibuf|lrspro) (debug|info|notice|error|fatal)

Parameters
logging
Configure logging
level
Set the log level for a specified category
lglobal
Library-internal global log family
llapd
LAPD in libosmogsm
linp
A-bis Intput Subsystem
OsmoSTP VTY Reference 27 / 86

lmux
A-bis B-Subchannel TRAU Frame Multiplex
lmi
A-bis Input Driver for Signalling
lmib
A-bis Input Driver for B-Channels (voice)
lsms
Layer3 Short Message Service (SMS)
lctrl
Control Interface
lgtp
GPRS GTP library
lstats
Statistics messages and logging
lgsup
Generic Subscriber Update Protocol
loap
Osmocom Authentication Protocol
lss7
libosmo-sigtran Signalling System 7
lsccp
libosmo-sigtran SCCP Implementation
lsua
libosmo-sigtran SCCP User Adaptation
lm3ua
libosmo-sigtran MTP3 User Adaptation
lmgcp
libosmo-mgcp Media Gateway Control Protocol
ljibuf
libosmo-netif Jitter Buffer
lrspro
Remote SIM protocol
debug
Log debug messages and higher levels
info
Log informational messages and higher levels
notice
Log noticeable messages and higher levels
OsmoSTP VTY Reference 28 / 86

error
Log error messages and higher levels
fatal
Log only fatal messages

1.3.9 logging level force-all (debug|info|notice|error|fatal)

Command
logging level force-all (debug|info|notice|error|fatal)

Parameters
logging
Configure logging
level
Set the log level for a specified category
force-all
Globally force all logging categories to a specific level. This is released by the ’no logging level force-all’ command. Note:
any ’logging level <category> <level>’ commands will have no visible effect after this, until the forced level is released.
debug
Log debug messages and higher levels
info
Log informational messages and higher levels
notice
Log noticeable messages and higher levels
error
Log error messages and higher levels
fatal
Log only fatal messages

1.3.10 logging level set-all (debug|info|notice|error|fatal)

Command
logging level set-all (debug|info|notice|error|fatal)

Parameters
logging
Configure logging
level
Set the log level for a specified category
OsmoSTP VTY Reference 29 / 86

set-all
Once-off set all categories to the given log level. There is no single command to take back these changes -- each category
is set to the given level, period.
debug
Log debug messages and higher levels
info
Log informational messages and higher levels
notice
Log noticeable messages and higher levels
error
Log error messages and higher levels
fatal
Log only fatal messages

1.3.11 logging print category (0|1)

Command
logging print category (0|1)

Parameters
logging
Configure logging
print
Log output settings
category
Configure log message
0
Don’t prefix each log message
1
Prefix each log message with category/subsystem name

1.3.12 logging print category-hex (0|1)

Command
logging print category-hex (0|1)

Parameters
logging
Configure logging
OsmoSTP VTY Reference 30 / 86

print
Log output settings
category-hex
Configure log message
0
Don’t prefix each log message
1
Prefix each log message with category/subsystem nr in hex (’<000b>’)

1.3.13 logging print extended-timestamp (0|1)

Command
logging print extended-timestamp (0|1)

Parameters
logging
Configure logging

print
Log output settings
extended-timestamp
Configure log message timestamping

0
Don’t prefix each log message
1
Prefix each log message with current timestamp with YYYYMMDDhhmmssnnn

1.3.14 logging print file (0|1|basename) [last]

Command
logging print file (0|1|basename) [last]

Parameters
logging
Configure logging
print
Log output settings
file
Configure log message
OsmoSTP VTY Reference 31 / 86

0
Don’t prefix each log message
1
Prefix each log message with the source file and line
basename
Prefix each log message with the source file’s basename (strip leading paths) and line
[last]
Log source file info at the end of a log line. If omitted, log source file info just before the log text.

1.3.15 logging print level (0|1)

Command
logging print level (0|1)

Parameters
logging
Configure logging
print
Log output settings
level
Configure log message
0
Don’t prefix each log message
1
Prefix each log message with the log level name

1.3.16 logging set-log-mask MASK

Command
logging set-log-mask MASK

Parameters
logging
Configure logging
set-log-mask
Set the logmask of this logging target
MASK
List of logging categories to log, e.g. ’abc:mno:xyz’. Available log categories depend on the specific application, refer to
the ’logging level’ command. Optionally add individual log levels like ’abc,1:mno,3:xyz,5’, where the level numbers are
LOGL_DEBUG=1 LOGL_INFO=3 LOGL_NOTICE=5 LOGL_ERROR=7 LOGL_FATAL=8
OsmoSTP VTY Reference 32 / 86

1.3.17 logging timestamp (0|1)

Command
logging timestamp (0|1)

Parameters
logging
Configure logging
timestamp
Configure log message timestamping
0
Don’t prefix each log message
1
Prefix each log message with current timestamp

1.3.18 no logging level force-all

Command
no logging level force-all

Parameters
no
Negate a command or set its defaults
logging
Configure logging
level
Set the log level for a specified category
force-all
Release any globally forced log level set with ’logging level force-all <level>’

1.3.19 show alarms

Command
show alarms

Parameters
show
Show running system information
alarms
Show current logging configuration
OsmoSTP VTY Reference 33 / 86

1.3.20 show asciidoc counters

Command
show asciidoc counters

Parameters

show
Show running system information
asciidoc
Asciidoc generation

counters
Generate table of all registered counters

1.3.21 show cs7 (sua|m3ua|ipa) [<0-65534>]

Command
show cs7 (sua|m3ua|ipa) [<0-65534>]

Parameters

show
Show running system information
cs7
ITU-T Signaling System 7

sua
SCCP User Adaptation
m3ua
MTP3 User Adaptation

ipa
IPA Multiplex (SCCP Lite)
[<0-65534>]
Port Number

1.3.22 show cs7 instance <0-15> as (active|all|m3ua|sua)

Command
show cs7 instance <0-15> as (active|all|m3ua|sua)

Parameters
OsmoSTP VTY Reference 34 / 86

show
Show running system information
cs7
ITU-T Signaling System 7
instance
An instance of the SS7 stack
<0-15>
An instance of the SS7 stack
as
Application Server (AS)
active
Display all active ASs
all
Display all ASs (default)
m3ua
Display all m3ua ASs
sua
Display all SUA ASs

1.3.23 show cs7 instance <0-15> asp

Command
show cs7 instance <0-15> asp

Parameters

show
Show running system information
cs7
ITU-T Signaling System 7

instance
An instance of the SS7 stack
<0-15>
An instance of the SS7 stack

asp
Application Server Process (ASP)
OsmoSTP VTY Reference 35 / 86

1.3.24 show cs7 instance <0-15> route

Command
show cs7 instance <0-15> route

Parameters

show
Show running system information
cs7
ITU-T Signaling System 7

instance
An instance of the SS7 stack
<0-15>
An instance of the SS7 stack

route
Routing Table

1.3.25 show cs7 instance <0-15> sccp addressbook

Command
show cs7 instance <0-15> sccp addressbook

Parameters

show
Show running system information
cs7
ITU-T Signaling System 7

instance
An instance of the SS7 stack
<0-15>
An instance of the SS7 stack

sccp
Signalling Connection Control Part
addressbook
List all SCCP addressbook entries
OsmoSTP VTY Reference 36 / 86

1.3.26 show cs7 instance <0-15> sccp connections

Command
show cs7 instance <0-15> sccp connections

Parameters
show
Show running system information
cs7
ITU-T Signaling System 7
instance
An instance of the SS7 stack
<0-15>
An instance of the SS7 stack
sccp
Signalling Connection Control Part
connections
Show List of active SCCP connections

1.3.27 show cs7 instance <0-15> sccp ssn <0-65535>

Command
show cs7 instance <0-15> sccp ssn <0-65535>

Parameters
show
Show running system information
cs7
ITU-T Signaling System 7
instance
An instance of the SS7 stack
<0-15>
An instance of the SS7 stack
sccp
Signalling Connection Control Part
ssn
Find an SCCP User registered for the given SSN
<0-65535>
Subsystem Number (SSN)
OsmoSTP VTY Reference 37 / 86

1.3.28 show cs7 instance <0-15> sccp timers

Command
show cs7 instance <0-15> sccp timers

Parameters

show
Show running system information
cs7
ITU-T Signaling System 7

instance
An instance of the SS7 stack
<0-15>
An instance of the SS7 stack

sccp
Signaling Connection Control Part
timers
Show List of SCCP timers

1.3.29 show cs7 instance <0-15> sccp users

Command
show cs7 instance <0-15> sccp users

Parameters
show
Show running system information

cs7
ITU-T Signaling System 7
instance
An instance of the SS7 stack

<0-15>
An instance of the SS7 stack
sccp
Signalling Connection Control Part

users
Show List of SCCP Users registered
OsmoSTP VTY Reference 38 / 86

1.3.30 show cs7 instance <0-15> users

Command
show cs7 instance <0-15> users

Parameters
show
Show running system information
cs7
ITU-T Signaling System 7
instance
An instance of the SS7 stack
<0-15>
An instance of the SS7 stack
users
User Table

1.3.31 show fsm NAME

Command
show fsm NAME

Parameters
show
Show running system information
fsm
Show information about finite state machines
NAME
Display information about a single named finite state machine

1.3.32 show fsm all

Command
show fsm all

Parameters
show
Show running system information
fsm
Show information about finite state machines
all
Display a list of all registered finite state machines
OsmoSTP VTY Reference 39 / 86

1.3.33 show fsm-instances NAME

Command
show fsm-instances NAME

Parameters

show
Show running system information
fsm-instances
Show information about finite state machine instances

NAME
Display a list of all FSM instances of the named finite state machine

1.3.34 show fsm-instances all

Command
show fsm-instances all

Parameters

show
Show running system information
fsm-instances
Show information about finite state machine instances

all
Display a list of all FSM instances of all finite state machine

1.3.35 show history

Command
show history

Parameters
show
Show running system information
history
Display the session command history
OsmoSTP VTY Reference 40 / 86

1.3.36 show logging vty

Command
show logging vty

Parameters

show
Show running system information
logging
Show current logging configuration

vty
Show current logging configuration for this vty

1.3.37 show online-help

Command
show online-help

Parameters

show
Show running system information
online-help
Online help

1.3.38 show rate-counters

Command
show rate-counters

Parameters
show
Show running system information
rate-counters
Show all rate counters
OsmoSTP VTY Reference 41 / 86

1.3.39 show startup-config

Command
show startup-config

Parameters
show
Show running system information
startup-config
Contentes of startup configuration

1.3.40 show stats

Command
show stats

Parameters
show
Show running system information
stats
Show statistical values

1.3.41 show stats level (global|peer|subscriber)

Command
show stats level (global|peer|subscriber)

Parameters
show
Show running system information
stats
Show statistical values
level
Set the maximum group level
global
Show global groups only
peer
Show global and network peer related groups
subscriber
Show global, peer, and subscriber groups
OsmoSTP VTY Reference 42 / 86

1.3.42 show talloc-context (application|all) (full|brief|DEPTH)

Command
show talloc-context (application|all) (full|brief|DEPTH)

Parameters
show
Show running system information
talloc-context
Show talloc memory hierarchy
application
Application’s context
all
All contexts, if NULL-context tracking is enabled
full
Display a full talloc memory hierarchy
brief
Display a brief talloc memory hierarchy
DEPTH
Specify required maximal depth value

1.3.43 show talloc-context (application|all) (full|brief|DEPTH) filter REGEXP

Command
show talloc-context (application|all) (full|brief|DEPTH) filter REGEXP

Parameters
show
Show running system information
talloc-context
Show talloc memory hierarchy
application
Application’s context
all
All contexts, if NULL-context tracking is enabled
full
Display a full talloc memory hierarchy
brief
Display a brief talloc memory hierarchy
OsmoSTP VTY Reference 43 / 86

DEPTH
Specify required maximal depth value
filter
Filter chunks using regular expression
REGEXP
Regular expression

1.3.44 show talloc-context (application|all) (full|brief|DEPTH) tree ADDRESS

Command
show talloc-context (application|all) (full|brief|DEPTH) tree ADDRESS

Parameters
show
Show running system information
talloc-context
Show talloc memory hierarchy
application
Application’s context
all
All contexts, if NULL-context tracking is enabled
full
Display a full talloc memory hierarchy
brief
Display a brief talloc memory hierarchy
DEPTH
Specify required maximal depth value
tree
Display only a specific memory chunk
ADDRESS
Chunk address (e.g. 0xdeadbeef)

1.3.45 show version

Command
show version

Parameters
show
Show running system information
version
Displays program version
OsmoSTP VTY Reference 44 / 86

1.3.46 terminal length <0-512>

Command
terminal length <0-512>

Parameters

terminal
Set terminal line parameters
length
Set number of lines on a screen

<0-512>
Number of lines on screen (0 for no pausing)

1.3.47 terminal monitor

Command
terminal monitor

Parameters

terminal
Set terminal line parameters
monitor
Copy debug output to the current terminal line

1.3.48 terminal no length

Command
terminal no length

Parameters
terminal
Set terminal line parameters
no
Negate a command or set its defaults
length
Set number of lines on a screen
OsmoSTP VTY Reference 45 / 86

1.3.49 terminal no monitor

Command
terminal no monitor

Parameters
terminal
Set terminal line parameters
no
Negate a command or set its defaults
monitor
Copy debug output to the current terminal line

1.3.50 who

Command
who

Parameters
who
Display who is on vty

1.4 config

The config node is the root for all configuration commands, which are identical to the config file format. Changes made on the
telnet VTY can be made persistent with the ’write file’ command.

1.4.1 banner motd default

Command
banner motd default

Parameters
banner
Set banner string
motd
Strings for motd
default
Default string
OsmoSTP VTY Reference 46 / 86

1.4.2 banner motd file [FILE]

Command
banner motd file [FILE]

Parameters
banner
Set banner
motd
Banner for motd
file
Banner from a file
[FILE]
Filename

1.4.3 cs7 instance <0-15>

Command
cs7 instance <0-15>

Parameters
cs7
ITU-T Signaling System 7
instance
Configure a SS7 Instance
<0-15>
An instance of the SS7 stack

1.4.4 enable password (8|) WORD

Command
enable password (8|) WORD

Parameters
enable
Modify enable password parameters
password
Assign the privileged level password
8
Specifies a HIDDEN password will follow
dummy string
WORD
The HIDDEN ’enable’ password string
OsmoSTP VTY Reference 47 / 86

1.4.5 enable password LINE

Command
enable password LINE

Parameters

enable
Modify enable password parameters
password
Assign the privileged level password

LINE
The UNENCRYPTED (cleartext) ’enable’ password

1.4.6 hostname WORD

Command
hostname WORD

Parameters

hostname
Set system’s network name
WORD
This system’s network name

1.4.7 line vty

Command
line vty

Parameters
line
Configure a terminal line
vty
Virtual terminal
OsmoSTP VTY Reference 48 / 86

1.4.8 log alarms <2-32700>

Command
log alarms <2-32700>

Parameters

log
Configure logging sub-system
alarms
Logging alarms to osmo_strrb

<2-32700>
Maximum number of messages to log

1.4.9 log file .FILENAME

Command
log file .FILENAME

Parameters

log
Configure logging sub-system
file
Logging to text file

.FILENAME
Filename

1.4.10 log gsmtap [HOSTNAME]

Command
log gsmtap [HOSTNAME]

Parameters
log
Configure logging sub-system
gsmtap
Logging via GSMTAP
[HOSTNAME]
Host name to send the GSMTAP logging to (UDP port 4729)
OsmoSTP VTY Reference 49 / 86

1.4.11 log stderr

Command
log stderr

Parameters
log
Configure logging sub-system
stderr
Logging via STDERR of the process

1.4.12 log syslog (authpriv|cron|daemon|ftp|lpr|mail|news|user|uucp)

Command
log syslog (authpriv|cron|daemon|ftp|lpr|mail|news|user|uucp)

Parameters
log
Configure logging sub-system
syslog
Logging via syslog
authpriv
Security/authorization messages facility
cron
Clock daemon (cron/at) facility
daemon
General system daemon facility
ftp
Ftp daemon facility
lpr
Line printer facility
mail
Mail facility
news
News facility
user
Generic facility
uucp
UUCP facility
OsmoSTP VTY Reference 50 / 86

1.4.13 log syslog local <0-7>

Command
log syslog local <0-7>

Parameters
log
Configure logging sub-system
syslog
Logging via syslog
local
Syslog LOCAL facility
<0-7>
Local facility number

1.4.14 no banner motd

Command
no banner motd

Parameters
no
Negate a command or set its defaults
banner
Set banner string
motd
Strings for motd

1.4.15 no enable password

Command
no enable password

Parameters
no
Negate a command or set its defaults
enable
Modify enable password parameters
password
Assign the privileged level password
OsmoSTP VTY Reference 51 / 86

1.4.16 no hostname [HOSTNAME]

Command
no hostname [HOSTNAME]

Parameters
no
Negate a command or set its defaults
hostname
Reset system’s network name
[HOSTNAME]
Host name of this router

1.4.17 no log alarms

Command
no log alarms

Parameters
no
Negate a command or set its defaults
log
Configure logging sub-system
alarms
Logging alarms to osmo_strrb

1.4.18 no log file .FILENAME

Command
no log file .FILENAME

Parameters
no
Negate a command or set its defaults
log
Configure logging sub-system
file
Logging to text file
.FILENAME
Filename
OsmoSTP VTY Reference 52 / 86

1.4.19 no log stderr

Command
no log stderr

Parameters

no
Negate a command or set its defaults
log
Configure logging sub-system

stderr
Logging via STDERR of the process

1.4.20 no log syslog

Command
no log syslog

Parameters

no
Negate a command or set its defaults
log
Configure logging sub-system

syslog
Logging via syslog

1.4.21 no service advanced-vty

Command
no service advanced-vty

Parameters
no
Negate a command or set its defaults
service
Set up miscellaneous service
advanced-vty
Enable advanced mode vty interface
OsmoSTP VTY Reference 53 / 86

1.4.22 no service terminal-length [<0-512>]

Command
no service terminal-length [<0-512>]

Parameters

no
Negate a command or set its defaults
service
Set up miscellaneous service

terminal-length
System wide terminal length configuration
[<0-512>]
Number of lines of VTY (0 means no line control)

1.4.23 no stats reporter log

Command
no stats reporter log

Parameters
no
Negate a command or set its defaults

stats
Configure stats sub-system
reporter
Configure a stats reporter

log
Report to the logger

1.4.24 no stats reporter statsd

Command
no stats reporter statsd

Parameters
no
Negate a command or set its defaults
OsmoSTP VTY Reference 54 / 86

stats
Configure stats sub-system
reporter
Configure a stats reporter
statsd
Report to a STATSD server

1.4.25 password (8|) WORD

Command
password (8|) WORD

Parameters
password
Assign the terminal connection password
8
Specifies a HIDDEN password will follow
dummy string
WORD
The HIDDEN line password string

1.4.26 password LINE

Command
password LINE

Parameters
password
Assign the terminal connection password
LINE
The UNENCRYPTED (cleartext) line password

1.4.27 service advanced-vty

Command
service advanced-vty

Parameters
service
Set up miscellaneous service
advanced-vty
Enable advanced mode vty interface
OsmoSTP VTY Reference 55 / 86

1.4.28 service terminal-length <0-512>

Command
service terminal-length <0-512>

Parameters

service
Set up miscellaneous service
terminal-length
System wide terminal length configuration

<0-512>
Number of lines of VTY (0 means no line control)

1.4.29 show history

Command
show history

Parameters

show
Show running system information
history
Display the session command history

1.4.30 stats interval <1-65535>

Command
stats interval <1-65535>

Parameters
stats
Configure stats sub-system
interval
Set the reporting interval
<1-65535>
Interval in seconds
OsmoSTP VTY Reference 56 / 86

1.4.31 stats reporter log

Command
stats reporter log

Parameters

stats
Configure stats sub-system
reporter
Configure a stats reporter

log
Report to the logger

1.4.32 stats reporter statsd

Command
stats reporter statsd

Parameters

stats
Configure stats sub-system
reporter
Configure a stats reporter

statsd
Report to a STATSD server

1.5 config-log

The log node is commonly available in all Osmocom programs and allows configuring logging to stderr and/or log files, including
logging category and level filtering as well as output formatting options. Note that the ’logging enable’ command is required to
make logging commands available on the telnet VTY.

1.5.1 logging color (0|1)

Command
logging color (0|1)

Parameters
OsmoSTP VTY Reference 57 / 86

logging
Configure logging
color
Configure color-printing for log messages
0
Don’t use color for printing messages
1
Use color for printing messages

1.5.2 logging filter all (0|1)

Disable/enable general log output on a given target. Typically, ’logging filter all 1’ allows to see the usual log output on a given
target. Setting to ’0’ can be useful when logging to the telnet VTY console: mute all log output to allow typing VTY commands
on the telnet prompt without interference from log output; ’logging filter all 1’ then re-enables logging in the same log output
configuration as before. Some applications provide more specific filters, e.g. to log a given IMSI only. To employ such filters,
set ’logging filter all 0’ to disable general logging, and then enable a more specific filter instead.

Command
logging filter all (0|1)

Parameters

logging
Configure logging
filter
Filter log messages

all
Do you want to log all messages?
0
Only print messages matched by other filters

1
Bypass filter and print all messages

1.5.3 logging level (lglobal|llapd|linp|lmux|lmi|lmib|lsms|lctrl|lgtp|lstats|lgsup|loa...

Command
logging level (lglobal|llapd|linp|lmux|lmi|lmib|lsms|lctrl|lgtp|lstats|lgsup|loap|lss7| ←-
lsccp|lsua|lm3ua|lmgcp|ljibuf|lrspro) (debug|info|notice|error|fatal)

Parameters
logging
Configure logging
OsmoSTP VTY Reference 58 / 86

level
Set the log level for a specified category
lglobal
Library-internal global log family
llapd
LAPD in libosmogsm
linp
A-bis Intput Subsystem
lmux
A-bis B-Subchannel TRAU Frame Multiplex
lmi
A-bis Input Driver for Signalling
lmib
A-bis Input Driver for B-Channels (voice)
lsms
Layer3 Short Message Service (SMS)
lctrl
Control Interface
lgtp
GPRS GTP library
lstats
Statistics messages and logging
lgsup
Generic Subscriber Update Protocol
loap
Osmocom Authentication Protocol
lss7
libosmo-sigtran Signalling System 7
lsccp
libosmo-sigtran SCCP Implementation
lsua
libosmo-sigtran SCCP User Adaptation
lm3ua
libosmo-sigtran MTP3 User Adaptation
lmgcp
libosmo-mgcp Media Gateway Control Protocol
ljibuf
libosmo-netif Jitter Buffer
OsmoSTP VTY Reference 59 / 86

lrspro
Remote SIM protocol
debug
Log debug messages and higher levels
info
Log informational messages and higher levels
notice
Log noticeable messages and higher levels
error
Log error messages and higher levels
fatal
Log only fatal messages

1.5.4 logging level force-all (debug|info|notice|error|fatal)

Command
logging level force-all (debug|info|notice|error|fatal)

Parameters
logging
Configure logging

level
Set the log level for a specified category
force-all
Globally force all logging categories to a specific level. This is released by the ’no logging level force-all’ command. Note:
any ’logging level <category> <level>’ commands will have no visible effect after this, until the forced level is released.
debug
Log debug messages and higher levels
info
Log informational messages and higher levels
notice
Log noticeable messages and higher levels
error
Log error messages and higher levels
fatal
Log only fatal messages
OsmoSTP VTY Reference 60 / 86

1.5.5 logging level set-all (debug|info|notice|error|fatal)

Command
logging level set-all (debug|info|notice|error|fatal)

Parameters
logging
Configure logging
level
Set the log level for a specified category
set-all
Once-off set all categories to the given log level. There is no single command to take back these changes -- each category
is set to the given level, period.
debug
Log debug messages and higher levels
info
Log informational messages and higher levels
notice
Log noticeable messages and higher levels
error
Log error messages and higher levels
fatal
Log only fatal messages

1.5.6 logging print category (0|1)

Command
logging print category (0|1)

Parameters
logging
Configure logging
print
Log output settings
category
Configure log message
0
Don’t prefix each log message
1
Prefix each log message with category/subsystem name
OsmoSTP VTY Reference 61 / 86

1.5.7 logging print category-hex (0|1)

Command
logging print category-hex (0|1)

Parameters

logging
Configure logging
print
Log output settings

category-hex
Configure log message
0
Don’t prefix each log message

1
Prefix each log message with category/subsystem nr in hex (’<000b>’)

1.5.8 logging print extended-timestamp (0|1)

Command
logging print extended-timestamp (0|1)

Parameters

logging
Configure logging
print
Log output settings

extended-timestamp
Configure log message timestamping
0
Don’t prefix each log message

1
Prefix each log message with current timestamp with YYYYMMDDhhmmssnnn
OsmoSTP VTY Reference 62 / 86

1.5.9 logging print file (0|1|basename) [last]

Command
logging print file (0|1|basename) [last]

Parameters

logging
Configure logging
print
Log output settings

file
Configure log message
0
Don’t prefix each log message

1
Prefix each log message with the source file and line
basename
Prefix each log message with the source file’s basename (strip leading paths) and line

[last]
Log source file info at the end of a log line. If omitted, log source file info just before the log text.

1.5.10 logging print level (0|1)

Command
logging print level (0|1)

Parameters

logging
Configure logging
print
Log output settings

level
Configure log message
0
Don’t prefix each log message

1
Prefix each log message with the log level name
OsmoSTP VTY Reference 63 / 86

1.5.11 logging timestamp (0|1)

Command
logging timestamp (0|1)

Parameters
logging
Configure logging
timestamp
Configure log message timestamping
0
Don’t prefix each log message
1
Prefix each log message with current timestamp

1.5.12 no logging level force-all

Command
no logging level force-all

Parameters
no
Negate a command or set its defaults
logging
Configure logging
level
Set the log level for a specified category
force-all
Release any globally forced log level set with ’logging level force-all <level>’

1.6 config-stats

1.6.1 disable

Command
disable

Parameters
disable
Disable the reporter
OsmoSTP VTY Reference 64 / 86

1.6.2 enable

Command
enable

Parameters

enable
Enable the reporter

1.6.3 level (global|peer|subscriber)

Command
level (global|peer|subscriber)

Parameters

level
Set the maximum group level
global
Report global groups only

peer
Report global and network peer related groups
subscriber
Report global, peer, and subscriber groups

1.6.4 local-ip ADDR

Command
local-ip ADDR

Parameters
local-ip
Set the IP address to which we bind locally
ADDR
IP Address
OsmoSTP VTY Reference 65 / 86

1.6.5 mtu <100-65535>

Command
mtu <100-65535>

Parameters
mtu
Set the maximum packet size
<100-65535>
Size in byte

1.6.6 no local-ip

Command
no local-ip

Parameters
no
Negate a command or set its defaults
local-ip
Set the IP address to which we bind locally

1.6.7 no mtu

Command
no mtu

Parameters
no
Negate a command or set its defaults
mtu
Set the maximum packet size

1.6.8 no prefix

Command
no prefix

Parameters
no
Negate a command or set its defaults
prefix
Set the item name prefix
OsmoSTP VTY Reference 66 / 86

1.6.9 prefix PREFIX

Command
prefix PREFIX

Parameters

prefix
Set the item name prefix
PREFIX
The prefix string

1.6.10 remote-ip ADDR

Command
remote-ip ADDR

Parameters
remote-ip
Set the remote IP address to which we connect

ADDR
IP Address

1.6.11 remote-port <1-65535>

Command
remote-port <1-65535>

Parameters
remote-port
Set the remote port to which we connect
<1-65535>
Remote port number
OsmoSTP VTY Reference 67 / 86

1.7 config-line

1.7.1 bind A.B.C.D [<0-65535>]

Command
bind A.B.C.D [<0-65535>]

Parameters
bind
Accept VTY telnet connections on local interface
A.B.C.D
Local interface IP address (default: 127.0.0.1)
[<0-65535>]
Local TCP port number

1.7.2 login

Command
login

Parameters
login
Enable password checking

1.7.3 no login

Command
no login

Parameters
no
Negate a command or set its defaults
login
Enable password checking
OsmoSTP VTY Reference 68 / 86

1.8 config-cs7

1.8.1 as NAME (sua|m3ua|ipa)

Command
as NAME (sua|m3ua|ipa)

Parameters
as
Configure an Application Server
NAME
Name of the Application Server
sua
SCCP User Adaptation
m3ua
MTP3 User Adaptation
ipa
IPA Multiplex (SCCP Lite)

1.8.2 asp NAME <0-65535> <0-65535> (sua|m3ua|ipa)

Command
asp NAME <0-65535> <0-65535> (sua|m3ua|ipa)

Parameters
asp
Configure Application Server Process
NAME
Name of ASP
<0-65535>
Remote SCTP port number
<0-65535>
Local SCTP port number
sua
SCCP User Adaptation
m3ua
MTP3 User Adaptation
ipa
IPA Multiplex (SCCP Lite)
OsmoSTP VTY Reference 69 / 86

1.8.3 description .TEXT

Command
description .TEXT

Parameters

description
Save human-readable description of the object
.TEXT
Text until the end of the line

1.8.4 listen (sua|m3ua|ipa) <0-65534>

Command
listen (sua|m3ua|ipa) <0-65534>

Parameters
listen
Configure/Enable xUA Listener

sua
SCCP User Adaptation
m3ua
MTP3 User Adaptation

ipa
IPA Multiplex (SCCP Lite)
<0-65534>
SCTP Port number

1.8.5 network-indicator (international | national | reserved | spare)

Command
network-indicator (international | national | reserved | spare)

Parameters
network-indicator
Configure the Network Indicator
international
International Network
OsmoSTP VTY Reference 70 / 86

national
National Network
reserved
Reserved Network
spare
Spare Network

1.8.6 no as NAME

Command
no as NAME

Parameters

no
Negate a command or set its defaults
as
Disable Application Server

NAME
Name of AS

1.8.7 no asp NAME

Command
no asp NAME

Parameters
no
Negate a command or set its defaults
asp
Disable Application Server Process
NAME
Name of ASP
OsmoSTP VTY Reference 71 / 86

1.8.8 no listen (sua|m3ua|ipa) <0-65534>

Command
no listen (sua|m3ua|ipa) <0-65534>

Parameters
no
Negate a command or set its defaults
listen
Disable xUA Listener on given SCTP Port
sua
SCCP User Adaptation
m3ua
MTP3 User Adaptation
ipa
IPA Multiplex (SCCP Lite)
<0-65534>
SCTP Port number

1.8.9 no sccp-address NAME

Command
no sccp-address NAME

Parameters
no
Negate a command or set its defaults
sccp-address
Delete an SCCP addressbook entry
NAME
Name of the SCCP Address

1.8.10 point-code POINT_CODE

Command
point-code POINT_CODE

Parameters
point-code
Configure the local Point Code
POINT_CODE
Point Code
OsmoSTP VTY Reference 72 / 86

1.8.11 point-code delimiter (default|dash)

Command
point-code delimiter (default|dash)

Parameters

point-code
Point Code
delimiter
Configure Point Code Delimiter

default
Use dot as delimiter
dash
User dash as delimiter

1.8.12 point-code format <1-24> [<1-23>] [<1-22>]

Command
point-code format <1-24> [<1-23>] [<1-22>]

Parameters
point-code
Point Code

format
Configure Point Code Format
<1-24>
Length of first PC component

[<1-23>]
Length of second PC component
[<1-22>]
Length of third PC component

1.8.13 point-code format default

Command
point-code format default

Parameters
OsmoSTP VTY Reference 73 / 86

point-code
Point Code
format
Configure Point Code Format
default
Default Point Code Format (3.8.3)

1.8.14 route-table system

Command
route-table system

Parameters
route-table
Specify the name of the route table
system
Name of the route table

1.8.15 sccp-address NAME

Command
sccp-address NAME

Parameters
sccp-address
Create/Modify an SCCP addressbook entry
NAME
Name of the SCCP Address

1.8.16 sccp-timer (conn_est|ias|iar|rel|repeat_rel|int|guard|reset|reassembly) <1-99999...

Command
sccp-timer (conn_est|ias|iar|rel|repeat_rel|int|guard|reset|reassembly) <1-999999>

Parameters
sccp-timer
Configure SCCP timer values, see ITU-T Q.714
conn_est
Waiting for connection confirm message, 1 to 2 minutes (default: 60)
OsmoSTP VTY Reference 74 / 86

ias
Send keep-alive: on an idle connection, delay before sending an Idle Timer message, 5 to 10 minutes (default: 420)
iar
Receive keep-alive: on an idle connection, delay until considering a connection as stale, 11 to 21 minutes (default: 900)
rel
Waiting for release complete message, 10 to 20 seconds (default: 10)
repeat_rel
Waiting for release complete message; or to repeat sending released message after the initial expiry, 10 to 20 seconds
(default: 10)
int
Waiting for release complete message; or to release connection resources, freeze the LRN and alert a maintenance function
after the initial expiry, extending to 1 minute (default: 60)

guard
Waiting to resume normal procedure for temporary connection sections during the restart procedure, 23 to 25 minutes
(default: 1380)
reset
Waiting to release temporary connection section or alert maintenance function after reset request message is sent, 10 to 20
seconds (default: 10)
reassembly
Waiting to receive all the segments of the remaining segments, single segmented message after receiving the first segment,
10 to 20 seconds (default: 10)

<1-999999>
Timer value, in seconds

1.8.17 xua rkm routing-key-allocation (static-only|dynamic-permitted)

Command
xua rkm routing-key-allocation (static-only|dynamic-permitted)

Parameters

xua
SIGTRAN xxxUA related
rkm
Routing Key Management

routing-key-allocation
Routing Key Management Allocation Policy
static-only
Only static (pre-confgured) Routing Keys permitted

dynamic-permitted
Dynamically allocate Routing Keys for what ASPs request
OsmoSTP VTY Reference 75 / 86

1.9 config-cs7-as

1.9.1 asp NAME

Command
asp NAME

Parameters
asp
Specify that a given ASP is part of this AS
NAME
Name of ASP to be added to AS

1.9.2 description .TEXT

Command
description .TEXT

Parameters

description
Save human-readable description of the object
.TEXT
Text until the end of the line

1.9.3 no asp NAME

Command
no asp NAME

Parameters
no
Negate a command or set its defaults
asp
Specify ASP to be removed from this AS
NAME
Name of ASP to be removed
OsmoSTP VTY Reference 76 / 86

1.9.4 point-code override dpc PC

Command
point-code override dpc PC

Parameters

point-code
Point Code Specific Features
override
Override (force) a point-code to hard-coded value

dpc
Override Source Point Code
PC
Override Destination Point Code

1.9.5 qos-class <0-255>

Command
qos-class <0-255>

Parameters
qos-class
Specity QoS Class of AS

<0-255>
QoS Class of AS

1.9.6 recovery-timeout <1-2000>

Command
recovery-timeout <1-2000>

Parameters
recovery-timeout
Specifies the recovery timeout value in milliseconds
<1-2000>
Recovery Timeout in Milliseconds
OsmoSTP VTY Reference 77 / 86

1.9.7 routing-key RCONTEXT DPC

Command
routing-key RCONTEXT DPC

Parameters
routing-key
Define a routing key
RCONTEXT
Routing context number
DPC
Destination Point Code

1.9.8 routing-key RCONTEXT DPC si (aal2|bicc|b-isup|h248|isup|sat-isup|sccp|tup)

Command
routing-key RCONTEXT DPC si (aal2|bicc|b-isup|h248|isup|sat-isup|sccp|tup)

Parameters
routing-key
Define a routing key
RCONTEXT
Routing context number
DPC
Destination Point Code
si
Match on Service Indicator
aal2
ATM Adaption Layer 2
bicc
Bearer Independent Call Control
b-isup
Broadband ISDN User Part
h248
H.248
isup
ISDN User Part
sat-isup
Sattelite ISDN User Part
OsmoSTP VTY Reference 78 / 86

sccp
Signalling Connection Control Part
tup
Telephony User Part

1.9.9 routing-key RCONTEXT DPC si (aal2|bicc|b-isup|h248|isup|sat-isup|sccp|tup) ssn S...

Command
routing-key RCONTEXT DPC si (aal2|bicc|b-isup|h248|isup|sat-isup|sccp|tup) ssn SSN

Parameters
routing-key
Define a routing key
RCONTEXT
Routing context number
DPC
Destination Point Code
si
Match on Service Indicator
aal2
ATM Adaption Layer 2
bicc
Bearer Independent Call Control
b-isup
Broadband ISDN User Part
h248
H.248
isup
ISDN User Part
sat-isup
Sattelite ISDN User Part
sccp
Signalling Connection Control Part
tup
Telephony User Part
ssn
Match on Sub-System Number
SSN
Sub-System Number to match on
OsmoSTP VTY Reference 79 / 86

1.9.10 routing-key RCONTEXT DPC ssn SSN

Command
routing-key RCONTEXT DPC ssn SSN

Parameters

routing-key
Define a routing key
RCONTEXT
Routing context number

DPC
Destination Point Code
ssn
Match on Sub-System Number

SSN
Sub-System Number to match on

1.9.11 traffic-mode (broadcast | loadshare | roundrobin | override)

Command
traffic-mode (broadcast | loadshare | roundrobin | override)

Parameters

traffic-mode
Specifies traffic mode of operation of the ASP within the AS
broadcast
Broadcast to all ASP within AS

loadshare
Share Load among all ASP within AS
roundrobin
Round-Robin between all ASP within AS

override
Override
OsmoSTP VTY Reference 80 / 86

1.10 config-cs7-asp

1.10.1 block

Command
block

Parameters
block
Allows a SCTP Association with ASP, but doesn’t let it become active

1.10.2 description .TEXT

Command
description .TEXT

Parameters
description
Save human-readable description of the object
.TEXT
Text until the end of the line

1.10.3 local-ip A.B.C.D

Command
local-ip A.B.C.D

Parameters
local-ip
Specify Local IP Address from which to contact ASP
A.B.C.D
Local IP Address from which to contact of ASP

1.10.4 qos-class <0-255>

Command
qos-class <0-255>

Parameters
qos-class
Specify QoS Class of ASP
<0-255>
QoS Class of ASP
OsmoSTP VTY Reference 81 / 86

1.10.5 remote-ip A.B.C.D

Command
remote-ip A.B.C.D

Parameters

remote-ip
Specify Remote IP Address of ASP
A.B.C.D
Remote IP Address of ASP

1.10.6 shutdown

Command
shutdown

Parameters
shutdown
Terminates SCTP association; New associations will be rejected

1.11 config-cs7-listen

1.11.1 accept-asp-connections (pre-configured|dynamic-permitted)

Command
accept-asp-connections (pre-configured|dynamic-permitted)

Parameters
accept-asp-connections
Define what kind of ASP connections to accept
pre-configured
Accept only pre-confiugred ASPs (source IP/prt)
dynamic-permitted
Accept any connection and dynamically create an ASP definition
OsmoSTP VTY Reference 82 / 86

1.11.2 local-ip A.B.C.D

Command
local-ip A.B.C.D

Parameters
local-ip
Configure the Local IP Address for xUA
A.B.C.D
IP Address to use for XUA

1.12 config-cs7-rt

1.12.1 description .TEXT

Command
description .TEXT

Parameters
description
Save human-readable description of the object
.TEXT
Text until the end of the line

1.12.2 remove route POINT_CODE MASK

Command
remove route POINT_CODE MASK

Parameters
remove
Remove a Route
route
Remove a Route
POINT_CODE
Destination Point Code
MASK
Point Code Mask
OsmoSTP VTY Reference 83 / 86

1.12.3 update route POINT_CODE MASK linkset LS_NAME [priority PRIO] [qos-class (CLASS|d...

Command
update route POINT_CODE MASK linkset LS_NAME [priority PRIO] [qos-class (CLASS|default) ←-
]

Parameters
update
Update the Route
route
Update the Route
POINT_CODE
Destination Point Code
MASK
Point Code Mask
linkset
Point Code Length
LS_NAME
Specify Destination Linkset
[priority
Linkset Name
PRIO]
Specify Priority
[qos-class
Priority
CLASS
Specify QoS Class
default
QoS Class

1.13 config-cs7-sccpaddr

1.13.1 global-title

Command
global-title

Parameters
global-title
Add/Modify Global Title
OsmoSTP VTY Reference 84 / 86

1.13.2 no global-title

Command
no global-title

Parameters
no
Negate a command or set its defaults
global-title
Remove Global Title

1.13.3 no point-code

Command
no point-code

Parameters
no
Negate a command or set its defaults
point-code
Remove point-code Number

1.13.4 no subsystem-number

Command
no subsystem-number

Parameters
no
Negate a command or set its defaults
subsystem-number
Remove Subsystem Number

1.13.5 point-code POINT_CODE

Command
point-code POINT_CODE

Parameters
point-code
Add point-code Number
POINT_CODE
PC
OsmoSTP VTY Reference 85 / 86

1.13.6 routing-indicator (GT|PC|IP)

Command
routing-indicator (GT|PC|IP)

Parameters
routing-indicator
Add Routing Indicator
GT
by global-title
PC
by point-code
IP
by ip-address

1.13.7 subsystem-number <0-4294967295>

Command
subsystem-number <0-4294967295>

Parameters
subsystem-number
Add Subsystem Number
<0-4294967295>
SSN

1.14 config-cs7-sccpaddr-gt

1.14.1 digits DIGITS

Command
digits DIGITS

Parameters
digits
Set Global Title Digits
DIGITS
Number digits
OsmoSTP VTY Reference 86 / 86

1.14.2 global-title-indicator <0-15>

Command
global-title-indicator <0-15>

Parameters
global-title-indicator
Set Global Title Indicator
<0-15>
GTI

1.14.3 nature-of-address-indicator <0-127>

Command
nature-of-address-indicator <0-127>

Parameters
nature-of-address-indicator
Set Global Title Nature of Address Indicator
<0-127>
NAI

1.14.4 numbering-plan-indicator <0-15>

Command
numbering-plan-indicator <0-15>

Parameters
numbering-plan-indicator
Set Global Title Numbering Plan Indicator
<0-15>
NPI

1.14.5 translation-type <0-255>

Command
translation-type <0-255>

Parameters
translation-type
Set Global Title Translation Type
<0-255>
TT