Aw139 Ampi Chapter 00 PDF

Download as pdf or txt
Download as pdf or txt
You are on page 1of 38
At a glance
Powered by AI
The key takeaways are that this document provides all the necessary data for maintenance planning of the helicopter and includes chapters on the helicopter general information, airworthiness limitations, and scheduled/unscheduled maintenance.

The purpose of this document is to provide all the data necessary for the maintenance planning of the helicopter.

The chapters included in this document are Chapter 00 (Helicopter general), Chapter 04 (Airworthiness limitations section), and Chapter 05 (Scheduled/unscheduled maintenance).

39-A-AMPI-00-P

Air vehicle maintenance planning information

NOTE TO READERS
AW139 and AB139 are two names for the same product.
They identify two batches of aircraft manufactured in
conformity with a unique Type Certificate Data Sheet.
Where not specifically declared, the content of this
document is applicable to both AW139 and AB139
helicopters.

Publication date: 2015-03-03

For dates of issue and change of each chapter refer to the AMPI TOC (F.A.A.) page that follows

AMPI TITLE (F.A.A)


39-A-AMPI-00-P

This publication gives you all the data necessary for the maintenance planning of the helicopter.

Included here are the following chapters (please find included also some details on the included
Data Modules):
– Chapter 00 - Helicopter general
– Chapter 04 - Airworthiness limitations section (composed by):
• Retirement lives - General (39-B-04-10-00-00A-000A-A)
• Mandatory inspections - General (39-B-04-20-00-00A-000A-A)
• Certification maintenance requirements - General (39-B-04-30-00-00A-000A-A)
– Chapter 05 - Scheduled/unscheduled maintenance

All the maintenance data are included in data modules. A code identifies each data module.
The change record page in each chapter gives a constantly updated record of the condition of
that copy of the publication.
Refer to Agustawestland website http://www.agustawestland.com/content/technical-publication-
index to check the latest applicable change of the Maintenance Planning Information.

AMPI TITLE (F.A.A)


39-A-AMPI-00-P

Maintenance planning information – Table of contents


Keep this page in the publication immediately after the title page

Chapter Title Issue Date Change Date


00 Helicopter general Fourth 2013-10-24 -- --
04 Airworthiness limitations - E.A.S.A. approved Third 2013-10-24 2 2014-12-05
on behalf of F.A.A.
05 Scheduled / unscheduled maintenance Sixth 2013-10-24 8 2015-03-03

AMPI TOC (F.A.A.)

2015-03-03 Page 1
39-A-AMPI-00-P

THIS PAGE INTENTIONALLY LEFT BLANK

AMPI TOC (F.A.A.)

2015-03-03 Page 2
39-A-AMPI-00-P

Air vehicle maintenance planning information

Chapter 00
Helicopter general

Fourth issue: 2013-10-24

This issue replaces Third Issue dated 2006-07-15, Change 5 dated 2012-04-12

39-B-00-00-00-00A-001H-A
39-A-AMPI-00-P

THIS PAGE INTENTIONALLY LEFT BLANK

39-B-00-00-00-00A-001H-A
39-A-AMPI-00-P

List of effective pages


Dates of issue and changes are:
Fourth issue 2013-10-24

The Fourth Issue of this chapter, includes the modules that follow:

Document identifier Page Date Effectivity


39-B-00-00-00-00A-011A-A 2 N 2013-04-10 All
39-B-00-00-00-00A-017A-A 4 N 2013-04-10 All
39-B-00-00-00-00A-018A-A 18 N 2013-04-10 All

C = Changed module N = New module


D = Deleted module R = Revised module

*
( ) The asterisks identify the modules changed, revised, added or deleted with this change

Effectivity: All 00 LOEP

2013-10-24 Page 1
39-A-AMPI-00-P

THIS PAGE INTENTIONALLY LEFT BLANK

Effectivity: All 00 LOEP

2013-10-24 Page 2
39-A-AMPI-00-P

Change record

Change Incorporated Change Incorporated


No. date by (signature) No. date by (signature)

1 26

2 27

3 28

4 29

5 30

6 31

7 32

8 33

9 34

10 35

11 36

12 37

13 38

14 39

15 40

16 41

17 42

18 43

19 44

20 45

21 46

22 47

23 48

24 49

25 50

00 CR
Page 1
2013-10-24
39-A-AMPI-00-P

THIS PAGE INTENTIONALLY LEFT BLANK

00 CR
Page 2
2013-10-24
39-A-AMPI-00-P

Highlights
The listed changes are introduced with Fourth Issue
Document Identifier Reason for update
All data modules Changed logogram on the top left corner of the header of each page.

Effectivity: All 00 HI

2013-10-24 Page 1
39-A-AMPI-00-P

THIS PAGE INTENTIONALLY LEFT BLANK

Effectivity: All 00 HI

2013-10-24 Page 2
39-A-AMPI-00-P

Table of contents
Technical Name Information Name Document Identifier Effectivity
Maintenance planning List of effectivity codes 39-B-00-00-00-00A-011A-A All
information
Maintenance planning List of abbreviations 39-B-00-00-00-00A-017A-A All
information
Maintenance planning Introduction 39-B-00-00-00-00A-018A-A All
information

Effectivity: All 00 TOC

2013-10-24 Page 1
39-A-AMPI-00-P

THIS PAGE INTENTIONALLY LEFT BLANK

Effectivity: All 00 TOC

2013-04-22 Page 2
39-A-AMPI-00-P

39-B-00-00-00-00A-011A-A
Maintenance planning information – List of effectivity codes
-NPOoBrt-iegsn:aFtorm: erly39-A0 -0 -0 -0A-01H-D/0 4

Table of contents
References ................................................................................................................................... 1
1 List of effectivity codes ....................................................................................................... 1

List of tables
1 References ......................................................................................................................... 1

References

Table 1 References
Data Module Title
No references

Description

1 List of effectivity codes


Effectivity codes are included in this publication to shown service bulletins, modification and
configuration differences.
The effectivity codes are shown:

– In the effectivity space on each page of the data modules


– In the effectivity column of the list of effective pages
– In the effectivity column of the table of contents page
– In the effectivity column of the list of effective data modules page of each temporary revision.

Small effectivity differences in tables and illustrations are shown by notes.


The meaning of the effectivity codes used is as follows:

- All : Helicopters AW139:

- S/N 31005 and subsequent

- S/N 41001 and subsequent

Effectivity: All 39-B-00-00-00-00A-011A-A


End of data module
2013-04-10 Page 1
39-A-AMPI-00-P

THIS PAGE INTENTIONALLY LEFT BLANK

Effectivity: All 39-B-00-00-00-00A-011A-A

2013-04-10 Page 2
39-A-AMPI-00-P

39-B-00-00-00-00A-017A-A
Maintenance planning information – List of abbreviations
-NPOoBrt-iegsn:aFtorm: erly39-A0 -0 -0 -0A-017H-D/0 7

Table of contents
References ................................................................................................................................... 1
1 List of abbreviations ........................................................................................................... 1

List of tables
1 References ......................................................................................................................... 1

References

Table 1 References
Data Module Title
No references

Description

1 List of abbreviations

ADM Air Data Module

AFCS Automatic Flight Control System

AHRS Attitude and Heading Reference System

ALS Airworthiness Limitation Section

AMM Air Vehicle Maintenance Manual

ATA Air Transport Association

AWG Aural Warning Generator

CAS Crew Alerting System

CCD Cursor Control Device

CMAP Customer Maintenance Advisory Panel

CMC Central Maintenance Computer

CMM Component Maintenance Manual

CMR Certification Maintenance Requirement

CS Certification Subject

CVR Cockpit Voice Recorder

DI Detailed Inspection

DMC Data Module Code

Effectivity: All 39-B-00-00-00-00A-017A-A

2013-04-10 Page 1
39-A-AMPI-00-P

DS Discard

E.A.S.A. European Aviation Safety Agency

ECS Environmental Control System

ELT Emergency Locator Transmitter

EMM Engine Maintenance Manual

F.A.A. Federal Aviation Agency

FC Functional Check

FCU Fuel Control Unit

FDR Flight Data Recorder

FH Flying Hour

FIPS Full Ice Protection System

GCU Generation Control Unit

GVI General Visual Inspection

JAR Joint Aviation Requirements

HP High Pressure

ICS Intercommunication System

IGB Intermediate Gearbox

IDB Ice Detector Box

ISDS Icing Severity Detection System (ice detection system)

LH Left Hand

LP Low Pressure

LU Lubrication

LVDT Linear Variable Differential Transformer

MAU Modular Avionic Unit

MCDU Multifunction Control Display Unit

MCL Master Caution Light

MGB Main Gear Box

MLG Main Landing Gear

MPFR Multi Purpose Flight Recorder

MRC Modular Radio Cabinet

MRSR Main Rotor Slip Ring

MSG Maintenance Steering Group

Effectivity: All 39-B-00-00-00-00A-017A-A

2013-04-10 Page 2
39-A-AMPI-00-P

MSI Maintenance Significant Item

MVA Master Vibration Absorber

NF Power turbine speed

NLG Nose Landing Gear

No Number

OC Operational Check

OVHL Overhaul

PCM Power Control Module

RCP Reconfiguration Control Panel

RFM Rotorcraft Flight Manual

RH Right Hand

Rotor Hour

SDI Special Detailed Inspection

SMC Scheduled Maintenance Check

SOV Shut-Off Valve

SSI Structural Significant Item

STA or STN Station

SV Servicing

TCAS Traffic alert and Collision Avoidance System

TGB Tail Gear Box

TRSOV Tail Rotor Shut-Off Valve

UMC Unscheduled Maintenance Check

VC Visual Check

Effectivity: All 39-B-00-00-00-00A-017A-A


End of data module
2013-04-10 Page 3
39-A-AMPI-00-P

THIS PAGE INTENTIONALLY LEFT BLANK

Effectivity: All 39-B-00-00-00-00A-017A-A

2013-04-10 Page 4
39-A-AMPI-00-P

39-B-00-00-00-00A-018A-A
Maintenance planning information – Introduction
-NPOoBrt-iegsn:aFtorm: erly39-A0 -0 -0 -0A-018H-D/0 6

Table of contents
References ................................................................................................................................... 2
1 General............................................................................................................................... 2
2 Data Module Code (DMC).................................................................................................. 2
2.1 Model identification code.................................................................................................... 2
2.2 System difference code...................................................................................................... 2
2.3 Standard Numbering System (SNS) code.......................................................................... 3
2.4 Disassembly code and disassembly code variant.............................................................. 3
2.5 Information code and information code variant .................................................................. 3
2.6 Item location code .............................................................................................................. 4
3 List of system numbers ...................................................................................................... 5
4 Data module contents ........................................................................................................ 6
4.1 General............................................................................................................................... 6
4.2 References ......................................................................................................................... 6
4.3 Description ......................................................................................................................... 7
5 Page identification .............................................................................................................. 7
6 List of effective pages......................................................................................................... 7
7 Table of contents................................................................................................................ 7
8 Updating of publication....................................................................................................... 7
8.1 General............................................................................................................................... 7
8.2 Change marks .................................................................................................................... 8
8.3 Temporary revisions........................................................................................................... 8
9 Table of contents of maintenance planning information..................................................... 9
10 List of abbreviations ........................................................................................................... 9
11 List of effectivity codes ....................................................................................................... 9
12 Proprietary rights notice ..................................................................................................... 9

List of tables
1 References ......................................................................................................................... 2
2 DMC structure .................................................................................................................... 2
3 Primary information codes.................................................................................................. 4
4 List of system numbers ...................................................................................................... 5

List of figures
1 Example of maintenance planning information data module (Sheet 1 of 2)..................... 10
1 Example of maintenance planning information data module (Sheet 2 of 2)..................... 11
2 Example of list of effective pages..................................................................................... 12
3 Example of table of contents ............................................................................................ 13
4 Example of change record page ...................................................................................... 14
5 Example of record of temporary revision page................................................................. 15
6 Example of temporary revision title page ......................................................................... 16
7 Example of list of effective data modules page ................................................................ 17

Effectivity: All 39-B-00-00-00-00A-018A-A

2013-04-10 Page 1
39-A-AMPI-00-P

References

Table 1 References
Data Module Title
39-B-00-00-00-00A-017A-A Maintenance planning information – List of
abbreviations
39-B-00-00-00-00A-011A-A Maintenance planning information – List of effectivity
codes

Description

1 General
This publication gives you all the data necessary for the maintenance planning of the
AgustaWestland AW139 helicopter.
The maintenance planning information includes the chapters that follow applicable to the
helicopter maintenance information:

– Chapter 04 - Airworthiness limitations.


– Chapter 05 - Schedules/unscheduled maintenance requirements.

The publications that follow give more data about the maintenance of the helicopter:

– Maintenance Publication (39-A-AMP-00-P).


– Fault Isolation Publication (39-A-AFIP-00-P).
– Wiring Data Publication (39-A-AWDP-00-P).

The data necessary for the repair and overhaul of the components removed from the helicopter
are given in the Component Repair and Overhaul publication (39-A-CR&OP-00-P).
The data necessary for the repair of the helicopter structure are given in the Structural Repair
publication (39-A-ASRP-00-P).
All the maintenance data are included in data modules. A code identifies each data module. Refer
to Para 2 for the structure of the Data Module Code (DMC).

2 Data Module Code (DMC)


The DMC structure is shown in Table 2.
Table 2 DMC structure

DMC 39 A XX-XX-XX YXA XXXA A

Para. Para 2.1 Para 2.2 Para 2.3 Para 2.4 Para 2.5 Para 2.6

eg: 39-A-04-10-00-00A-000A-A

2.1 Model identification code


The model identification code for the AW139 is 39.

2.2 System difference code


The system difference code is a letter (letters I and O are not used).

Effectivity: All 39-B-00-00-00-00A-018A-A

2013-04-10 Page 2
39-A-AMPI-00-P

This letter identifies two or more sub-systems that can be installed as alternative items because
they do the same function (eg: VHF systems by different suppliers).

2.3 Standard Numbering System (SNS) code


The SNS code includes three pairs of digits which show:

– The system (eg: 29, hydraulic power).


– The sub-system and sub-subsystem (eg: 11, Number 1 main-hydraulic system).

Note
When the sub-subsystem code is zero, the two digits show all of the sub-system.

– The component (eg: 01, Number 1 power-control module).

Refer to Para 3 for the list of the system numbers.

2.4 Disassembly code and disassembly code variant

2.4.1 Disassembly code


The disassembly code is a two-digit code.
The disassembly code shows the breakdown of a component, as follows:

– 00 - Data module for all of the helicopter, system, sub-system or component.


– 01 - Data module for the first assembly that you remove from the component.
– 02 - Data module for the second assembly that you remove from the component.

Code 03 and the subsequent codes refer to the third, fourth, etc assembly that you remove from
the component.
The disassembly code also identifies the data modules in sequence.

2.4.2 Disassembly code variant


The disassembly code variant is a letter (letter I and O are not used) which identifies alternative
items.
These items are different, but the difference is too small to cause a change in the system
difference code.

2.5 Information code and information code variant

2.5.1 Information code


The information code is a three-digit code.
The information code identifies the types of information you can find in the data module.
000 is used for the systems, for which the SNS identifies the type of information in the data module
(eg: 05-10 is “time limits”, you must write 000).
The primary codes used in the publication set for the helicopter are written in Table 3.

Effectivity: All 39-B-00-00-00-00A-018A-A

2013-04-10 Page 3
39-A-AMPI-00-P

Table 3 Primary information codes

Code Definition

0XX Function, data for plans and description

1XX Operation

2XX Servicing

3XX Examination, tests and checks

4XX Fault reports and isolation procedures

5XX Disconnect, remove and disassemble procedures

6XX Repairs and locally make procedures and data

7XX Assemble, install and connect procedures

8XX Storage procedures and data

9XX Miscellaneous

2.5.2 Information code variant


The information code variant is a letter (letters I and O are not used).
The information code variant is used for different data modules that are applicable to the same
component and type of operation.

2.6 Item location code


The item location code is a letter which shows where you must do the maintenance task.
In this publication, you can find these item location codes:

– A on the helicopter.
– B on the removed assembly/component.
– C on the removed assembly/component at repair/overhaul level.
– D applicable to all the locations.

The letter K is used as the item location code for the identification of the data modules
applicable to:

– Optional installations.

Effectivity: All 39-B-00-00-00-00A-018A-A

2013-04-10 Page 4
39-A-AMPI-00-P

– Optional systems.
– Optional equipment.

3 List of system numbers


Refer to Table 4.
Table 4 List of system numbers

System Title

00 Helicopter general

04 Airworthiness limitations

05 Scheduled/unscheduled maintenance

06 Dimensions and areas

07 Lifting, shoring, recovering and transporting

08 Leveling and weighing

09 Handling and taxiing

10 Parking, mooring and storing

11 Placards and markings

12 Servicing

18 Vibration and noise analysis and attenuation

20 Standard practices - Airframe systems

21 Environmental control

22 Auto flight

23 Communications

24 Electrical power

25 Equipment/furnishings

26 Fire protection

28 Fuel

29 Hydraulic power

30 Ice and rain protection

31 Indicating/recording systems

32 Landing gear

33 Lights

34 Navigation

45 Central maintenance system (CMS)

46 Systems integration and display

Effectivity: All 39-B-00-00-00-00A-018A-A

2013-04-10 Page 5
39-A-AMPI-00-P

System Title

51 Standard practices - Structures

52 Doors

53 Fuselage

55 Stabilizers

56 Windows

60 Standard practices - rotors

62 Main rotor

63 Main rotor drive

64 Tail rotor

65 Tail rotor drive

67 Rotors flight control

71 Power plant

73 Engine fuel and control

74 Ignition

75 Air

76 Engine controls

77 Engine indicating

78 Exhaust

79 Oil

80 Starting

91 Helicopter wiring

95 Crew escape and safety

4 Data module contents


4.1 General
In the data modules of this publication, the data is written below the headings that follow:

– References.
– Description.

These headings do not have a number.


Each data module includes a table of contents, a list of tables and a list of figures (if applicable).

4.2 References
Below this heading you find a list of the data modules and technical publications which are
included as references in the data module.

Effectivity: All 39-B-00-00-00-00A-018A-A

2013-04-10 Page 6
39-A-AMPI-00-P

“No references” is written if there are no references.

4.3 Description
Below this heading you find lines of text (data module content) and the related tables and figures.

5 Page identification
Each page of a data module includes these data:

– The technical publication code in the top right corner of the header.
– The data module code in the top right corner of the footer.
– The page number in the bottom right corner of the footer. “End of data module” is written at
center of the footer on the last page of the module.
– The page date (YYYY-MM-DD), in the bottom right corner of the footer, left of the page
number.
– The effectivity data in the left corner of the footer (Para 11).

Refer to Fig 1.

6 List of effective pages


Each chapter includes a List Of Effective Pages (LOEP). The LOEP shows the data module codes
of all the data modules in the chapter.
The LOEP gives the information that follows for each data module:

– Document identifier column. This column shows the data module code (Para 2)
– Page column. This column shows the total number of pages in the data module
– Date column. This column shows the date of the issue of the module (Para 5). Before the date
there is a letter. This letter shows if the module is changed (C), deleted (D), new (N) or revised
(R). An asterisk after the date identifies the modules changed, deleted, added or revised with
the last change.
– Effectivity column. This column shows if the data module can give information about service
bulletins, modifications and configuration differences (Para 11).

An example of a list of effective pages is shown in Fig 2.

7 Table of contents
Each chapter includes a Table Of Contents (TOC). The TOC is a list of the titles of the data
modules included in the chapter.
The TOC has four columns that give the information that follows:

– Technical name and information name. These two columns together give the title of the data
module.
– Document identifier. This column gives the data module code.
– Effectivity. This column gives information about the applicability of the data module to
different versions, configurations and modifications of the helicopter (Para 11).

An example of a table-of-contents page is shown in Fig 3.

8 Updating of publication
8.1 General
The first issue of each chapter of the publication is identified “first issue”. An update can be
prepared as a "change" or a "new issue".

Effectivity: All 39-B-00-00-00-00A-018A-A

2013-04-10 Page 7
39-A-AMPI-00-P

The number of the issues is as follows:

– The first completed issue after the first issue is the "2nd issue".
– The issues that follow are the "3rd issue", the "4th issue", etc.

The numbers of the changes are in sequence from "change 1", until the "new issue".
A change to the publication contains replacement Data Modules (DM). The replacement data
modules of each chapter include:

– A new title page


– A new highlights page
– A new list of effective pages (Para 6)
– A new table of contents page (Para 7).

The change number and the change date are shown on the new title page immediately below the
issue number and the issue date.
The highlights page tells the cause of the change for each DM included in the "Document
identifier" column.
The change record page in each chapter gives a constantly updated record of the condition of that
copy of the chapter. An example of a change record page is shown in Fig 4.
It is possible to revise a DM as an alternative to the change. This happens when the DM
modifications affect more than 80% of the total DM.
In addition a chapter can be re-issued when more than 80% of included DMs are changed/
revised.

8.2 Change marks


The change marks show the changed material (text, tables and figures). The change mark is a
vertical black line in the left margin of the page.
The change marks are not used:

– To identify editorial changes


– In the list of effective pages
– In the table of contents pages
– In the revised data modules.

8.3 Temporary revisions


The temporary revisions are issued when data modules must be included in the publication
immediately. They are printed on blue paper. The numbers of the temporary revisions are in
sequence. The first is 001.
The page “Record of Temporary Revisions” (ROTR) is also sent at the time of the issue of the first
“Temporary Revision” (TR) (Fig 5).
This page lets you record, for each TR:

– The issue date


– The insertion date of the data modules (or data module) that make the TR in the applicable
chapters (chapter) of the publication
– The signature of the person who does the insertion
– The removal date of the data modules (or module) when they are included in a new Change
– The signature of the person who does the removal.

The ROTR page must be kept in the publication, and is the page immediately after the cover page.

Effectivity: All 39-B-00-00-00-00A-018A-A

2013-04-10 Page 8
39-A-AMPI-00-P

Each TR includes:

– A title page (Fig 6)


– A “List of Effective Data Modules” (LOEDM) page.

This list shows the data module codes of all the data modules in the TR.
An example of a LOEDM page is shown in Fig 7.

9 Table of contents of maintenance planning information


The maintenance planning publication includes a Table of Contents (TOC). The TOC is a list of
the chapters included in the publication.
For each chapter, the TOC gives the title, the issue number, the issue date, the change number
and the change date (Para 8.1).
You must keep the AMPI TOC page in the publication immediately after the cover page.

10 List of abbreviations
Refer to 39-B-00-00-00-00A-017A-A.

11 List of effectivity codes


Refer to 39-B-00-00-00-00A-011A-A.

12 Proprietary rights notice


This publication contains information proprietary to the AgustaWestland. Reproduction and/or
resale of the information or illustrations contained herein is not permitted without the written
approval of AgustaWestland – Customer Support & Services – Technical Publications
Department.

Effectivity: All 39-B-00-00-00-00A-018A-A

2013-04-10 Page 9
39-A-AMPI-00-P
1

ICN-39-A-000000-G-00001-03730-A-03-1

Figure 1 - Example of maintenance planning information data module (Sheet 1 of 2)

Effectivity: All 39-B-00-00-00-00A-018A-A

2013-04-10 Page 10
39-A-AMPI-00-P

ICN-39-A-000000-G-00001-03731-A-03-1

Figure 1 - Example of maintenance planning information data module (Sheet 2 of 2)

Effectivity: All 39-B-00-00-00-00A-018A-A

2013-04-10 Page 11
39-A-AMPI-00-P
2

ICN-39-A-000000-G-00001-03732-A-04-1

Figure 2 - Example of list of effective pages

Effectivity: All 39-B-00-00-00-00A-018A-A

2013-04-10 Page 12
39-A-AMPI-00-P
3

ICN-39-A-000000-G-00001-03733-A-04-1

Figure 3 - Example of table of contents

Effectivity: All 39-B-00-00-00-00A-018A-A

2013-04-10 Page 13
39-A-AMPI-00-P
4

ICN-39-A-000000-G-00001-03734-A-03-1

Figure 4 - Example of change record page

Effectivity: All 39-B-00-00-00-00A-018A-A

2013-04-10 Page 14
39-A-AMPI-00-P
5

ICN-39-A-000000-G-00001-03735-A-03-1

Figure 5 - Example of record of temporary revision page

Effectivity: All 39-B-00-00-00-00A-018A-A

2013-04-10 Page 15
39-A-AMPI-00-P
6

ICN-39-A-000000-G-00001-03736-A-03-1

Figure 6 - Example of temporary revision title page

Effectivity: All 39-B-00-00-00-00A-018A-A

2013-04-10 Page 16
39-A-AMPI-00-P
7

ICN-39-A-000000-G-00001-03737-A-03-1

Figure 7 - Example of list of effective data modules page

Effectivity: All 39-B-00-00-00-00A-018A-A


End of data module
2013-04-10 Page 17
39-A-AMPI-00-P

THIS PAGE INTENTIONALLY LEFT BLANK

Effectivity: All 39-B-00-00-00-00A-018A-A

2013-04-10 Page 18

You might also like