SG750 | 33.

9L | 750 kW
INDUSTRIAL SPARK-IGNITED GENERATOR SET
EPA Certified Stationary Emergency and Non-Emergency

DEMAND RESPONSE READY

Standby Power Rating

750 kW, 938 kVA, 60 Hz

Demand Response Power Rating

750 kW, 938 kVA, 60 Hz

*Assembled in the USA using

domestic and foreign parts

Image used for illustration purposes only

Codes and Standards Powering Ahead

Not all codes and standards apply to all configurations. Contact
Generac ensures superior quality by designing and
factory for details.
manufacturing most of its generator components, such
as alternators, enclosures, control systems and com-
UL2200, UL6200, UL1236, UL489
munications software. Generac also makes its own
spark-ignited engines, and you’ll find them on every
CSA C22.2, B149 Generac gaseous-fueled generator. We engineer and
manufacture them from the block up — all at our facili-
BS5514 and DIN 6271 ties throughout Wisconsin. Applying natural gas and
TM

LP-fueled engines to generators requires advanced

SAE J1349 engineering expertise to ensure reliability, durability and
® necessary performance. By designing specifically for
these dry, hotter-burning fuels, the engines last longer
NFPA 37, 70, 99, 110 and require less maintenance. Building our own
engines also means we control every step of the supply
®
NEC700, 701, 702, 708 chain and delivery process, so you benefit from single-
source responsibility.
ISO 3046, 7637, 8528, 9001
Plus, Generac Industrial Power’s distribution network
provides all parts and service so you don’t have to deal
NEMA ICS10, MG1, 250, ICS6, AB1
with third-party suppliers. It all leads to a positive
SPEC SHEET

ANSI C62.41
owner experience and higher confidence level. Generac
spark-ignited engines give you more options in com-
mercial and industrial generator applications as well as
extended run time from utility-supplied natural gas.
1 of 6
SG750 | 33.9L | 750 kW
INDUSTRIAL SPARK-IGNITED GENERATOR SET
EPA Certified Stationary Emergency and Non-Emergency

STANDARD FEATURES DEMAND RESPONSE READY

ENGINE SYSTEM Electrical System GENERATOR SET

• Oil Drain Extension • Battery Charging Alternator • Spring Genset Vibration Isolators
• Heavy Duty Air Cleaner • Battery Cables • Separation of Circuits - High/Low Voltage
• Level 1 Fan and Belt Guard (Open Set Only) • Battery Tray • Separation of Circuits - Multiple Breakers
• Stainless Steel Flexible Exhaust Connection • Rubber-Booted Engine Electrical Connections • Wrapped Exhaust Piping
• Factory Filled Oil and Coolant • Solenoid Activated Starter Motor • Standard Factory Testing
• Critical Silencer/Catalyst • 2 Year Limited Warranty (Standby and Demand
• Oil Temperature Indication and Alarm
ALTERNATOR SYSTEM Response Rated Units)
• Radiator Duct Adapter (Open Set Only) • UL2200 GENprotect™ • 1 Year Limited Warranty (Prime Rated Units)
• Coolant Heater Ball Valves • Class H Insulation Material • Ready to Accept Full Load in <10 Seconds
• 2/3 Pitch
ENCLOSURE (If Selected)
Fuel System • Skewed Stator
• NPT Fuel Connection on Frame • Permanent Magnet Excitation • Structural Steel Sub-Base
• Primary and Secondary Fuel Shutoff • Sealed Bearings • Sub-Base Lifting Eyes
• Amortisseur Winding • Enamel Finish
Cooling System • Low Temperature Rise <120°C • Zinc Plated Fasteners
• Closed Coolant Recovery System • Zinc Plated Cast Aluminum Keylock Door Handles
• Factory-Installed Radiator • Heavy Duty Stainless Steel Hinges with Removable
• 50/50 Ethylene Glycol Antifreeze Brass Pins
• Radiator Drain Extension
• Modular Construction
• Rhino Coat™ - Textured Polyester Powder
Coat Paint

CONTROL SYSTEM • Wi-Fi®, Bluetooth®, BMS and Remote Telemetry 7 Inch Color Touch Screen Display
• •
Built-In Programmable Logic Eliminates the Need for
External Controllers Under Most Conditions Resistive Color Touch Screen
• Ethernet Based Communications • Sunlight Readable (1400 NITS)
Between Generators • Easily Identifiable Icons
• Programmable I/O Channel Properties • Multi-Lingual
• Built-In Diagnostics • On Screen Editable Parameters
• Key Function Monitoring
Protections • Three Phase Voltage, Amperage, kW, kVA, and kVAr
• Low Oil Pressure • Selectable Line to Line or Line to
• Low Coolant Level Neutral Measurements
• High/Low Coolant Temperature • Frequency
• Sensor Failure • Engine Speed
• Oil Temperature • Engine Coolant Temperature
Power Zone® Pro Sync Controller • Over/Under Speed • Engine Oil Pressure
• Over/Under Voltage • Engine Oil Temperature
Program Functions • Over/Under Frequency • Battery Voltage
• NFPA 110 Level 1 Compliant • Over/Under Current • Hourmeter
• Engine Protective Functions • Over Load • Warning and Alarm Indication
• Alternator Protective Functions • High/Low Battery Voltage • Diagnostics
• Digital Engine Governor Control • Battery Charger Current • Maintenance Events/Information
SPEC SHEET

• Digital Voltage Regulator • Phase to Phase and Phase to Neutral Short Circuits
• Multiple Programmable Inputs and Outputs (I2T Algorithm)
• Remote Display Capability
• Remote Communication via Modbus® RTU, Mod-
bus TCP/IP, and Ethernet 10/100
• Alarm and Event Logging with Real Time Stamping
• Expandable Analog and Digital Inputs and Outputs 2 of 6
• Remote Wireless Software Update Capable
SG750 | 33.9L | 750 kW
INDUSTRIAL SPARK-IGNITED GENERATOR SET
EPA Certified Stationary Emergency and Non-Emergency

CONFIGURABLE OPTIONS DEMAND RESPONSE READY

ENGINE SYSTEM CIRCUIT BREAKER OPTIONS ENCLOSURE

○ Engine Coolant Heater ○ Main Line Circuit Breaker ○ Weather Protected Enclosure
○ Oil Heater ○ 2nd Main Line Circuit Breaker ○ Level 1 Sound Attenuated
○ Level 1 Fan and Belt Guards (Enclosed Units Only) ○ Shunt Trip and Auxiliary Contact ○ Level 2 Sound Attenuated
○ Two Stage Air Cleaner ○ Electronic Trip Breakers ○ Level 1 Sound Attenuated with Motorized Dampers
○ Air Filter Restriction Indicator ○ Level 2 Sound Attenuated with Motorized Dampers
○ Radiator Stone Guard (Open Set Only) CONTROL SYSTEM ○ Steel Enclosure
○ Shipped Loose Catalyst Silencer (Enclosed ○ NFPA 110 Level 1 Compliant 21-Light ○ Aluminum Enclosure
Units Only) Remote Annunciator ○ AC Enclosure Lighting Kit
○ Remote Output Relays (8 or 16) ○ Enclosure Heaters (Motorized Dampers Only)
ELECTRICAL SYSTEM ○ Remote E-Stop (Break Glass-Type, Surface Mount) ○ Up to 200 MPH Wind Load Rating (Consult Factory
○ 20A UL Listed Battery Charger ○ Remote E-Stop (Red Mushroom-Type, for Availability)
○ Battery Warmer Surface Mount)
○ Remote E-Stop (Red Mushroom-Type, Flush Mount) WARRANTY (Standby Gensets Only)
FUEL SYSTEM ○ 10A Engine Run Relay ○ 2 Year Extended Limited Warranty
○ Flexible Fuel Line
○ Ground Fault Annunciator ○ 5 Year Limited Warranty
○ NPT Flexible Fuel Line ○ Damper Alarm Contacts (Motorized Dampers Only) ○ 5 Year Extended Limited Warranty
○ 100 dB Alarm Horn ○ 7 Year Extended Limited Warranty
ALTERNATOR SYSTEM ○ 120V GFCI and 240V Outlets ○ 10 Year Extended Limited Warranty
○ Alternator Upsizing
○ Anti-Condensation Heater

GENERATOR SET
○ Spring Vibration Isolator
○ Extended Factory Testing (3-Phase Only)
○ 24 Position Load Center

ENGINEERED OPTIONS

CONTROL SYSTEM GENERATOR SET

○ Additional Spare Inputs/Outputs ○ Special Testing
○ Battery Disconnect Switch ○ Battery Box

ALTERNATOR SYSTEM ENCLOSURE

○ 3rd Main Line Circuit Breaker ○ Door Open Alarm Switch
○ 4th Main Line Circuit Breaker
○ Unit Mounted Load Banks
○ Medium Voltage Alternators
SPEC SHEET

3 of 6
SG750 | 33.9L | 750 kW
INDUSTRIAL SPARK-IGNITED GENERATOR SET
EPA Certified Stationary Emergency and Non-Emergency

APPLICATION AND ENGINEERING DATA DEMAND RESPONSE READY

ENGINE SPECIFICATIONS

General Cooling System

Make Generac Cooling System Type Forced Circulation by Centrifugal Pump

Cylinder # 12 Fan Type Pusher
Type V Fan Speed - RPM 1,080
Displacement - in3 (L) 2,068 (33.9) Fan Diameter - in (mm) 64 (1,626)
Bore - in (mm) 5.9 (150)
Stroke - in (mm) 6.3 (160) Fuel System
Compression Ratio 10.0:1 Fuel Type Natural Gas
Intake Air Method Turbocharged/Aftercooled Carburetor Down Draft
Number of Main Bearings 7 Secondary Fuel Regulator Standard
Cylinder Head 4 Valve Fuel Shut Off Solenoid Standard
Ignition Electronic 14 - 20 (3.5 - 5.0)
Operating Fuel Pressure - in H2O (kPa)
Piston Type Cast Alumuim Alloy (Contact Factory for Details)
Crankshaft Type Chromium Molybdenum Steel
Lifter Type Solid Engine Electrical System
Intake Valve Material Proprietary Alloy System Voltage 24 VDC
Exhaust Valve Material Proprietary Alloy Battery Charger Alternator Standard
Hardened Valve Seats Proprietary Alloy Battery Size See Battery Index 0161970SBY
Battery Voltage (4) - 12 VDC
Engine Governing Ground Polarity Negative
Governor Electronic
Frequency Regulation (Steady State) ±0.25%

Lubrication System
Oil Pump Type Gear Driving
Oil Filter Type Full Flow Spin-on Cartridge
Crankcase Capacity - qt (L) 126.8 (120)

ALTERNATOR SPECIFICATIONS

Standard Model K0912124Y22 Standard Excitation Permanent Magnet

Poles 4 Bearings Single
Field Type Rotating Coupling Direct via Flexible Disc
Insulation Class - Rotor H Prototype Short Circuit Test Yes
Insulation Class - Stator H Voltage Regulator Type Full Digital
Total Harmonic Distortion <5% Number of Sensed Phases All
Telephone Interference Factor (TIF) <50 Regulation Accuracy (Steady State) ±0.25%
SPEC SHEET

4 of 6
SG750 | 33.9L | 750 kW
INDUSTRIAL SPARK-IGNITED GENERATOR SET
EPA Certified Stationary Emergency and Non-Emergency

OPERATING DATA DEMAND RESPONSE READY

POWER RATINGS - NATURAL GAS

Standby/Demand Response
Three-Phase 120/208 VAC @0.8pf 750 kW/938 kVA Amps: 2,605
Three-Phase 120/240 VAC @0.8pf 750 kW/938 kVA Amps: 2,258
Three-Phase 277/480 VAC @0.8pf 750 kW/938 kVA Amps: 1,129
Three-Phase 346/600 VAC @0.8pf 750 kW/938 kVA Amps: 903

MOTOR STARTING CAPABILITIES (skVA)

skVA vs. Voltage Dip
277/480 VAC 30% 208/240 VAC 30%
K0912124Y22 3,250 K1000124Y22 3,900
K1000124Y22 3,100 K1220124Y22 3,250
K1220124Y22 3,250 K1440124Y22 4,250

FUEL CONSUMPTION RATES*

Natural Gas – scfh (m3/hr)
Percent Load Standby/Demand Response
25% 2,718 (77)
50% 4,110 (116)
75% 5,820 (165)
100% 7,770 (220)
* Fuel supply installation must accommodate fuel
consumption rates at 100% load.

COOLING
Standby/Demand Response
Air Flow (Fan Air Flow Across Radiator) - Open Set scfm (m3/min) 34,000 (963)
Coolant Flow gpm (Lpm) 291 (1,101)
Coolant System Capacity gal (L) 55 (208)
Maximum Operating Ambient Temperature °F (°C) 122 (50)
Maximum Operating Ambient Temperature (Before Derate) See Bulletin No. 0199270SSD
Maximum Additional Radiator Backpressure in H2O (kPa) 0.5 (0.12)

COMBUSTION AIR REQUIREMENTS

Standby/Demand Response
Flow at Rated Power - scfm (m3/min) 1,450 (41.1)

ENGINE EXHAUST
Standby/Demand Response Standby/Demand Response
Rated Engine Speed RPM 1,800 Exhaust Flow (Rated Output) scfm (m3/min) 5,449 (154.3)
Maximum Allowable Backpressure
Horsepower at Rated kW** hp 1,118 inHg (kPa) 1.97 (6.67)
(Post Silencer)
SPEC SHEET

Exhaust Temperature (Rated Output -

Piston Speed ft/min (m/min) 1,890 (576) °F (°C) 1,332 (722)
Post Silencer)
BMEP psi (kPa) 226 (1,561)

** Refer to “Emissions Data Sheet” for maximum bHP for EPA and SCAQMD permitting purposes.

Deration – Operational characteristics consider maximum ambient conditions. Derate factors may apply under atypical site conditions.
Please contact a Generac Power Systems Industrial Dealer for additional details. All performance ratings in accordance with ISO3046, BS5514, ISO8528, and DIN6271 standards. 5 of 6
Standby – See Bulletin 10000018933
Prime – See Bulletin 10000018926
Demand Response – See Bulletin 10000018250
SG750 | 33.9L | 750 kW
INDUSTRIAL SPARK-IGNITED GENERATOR SET
EPA Certified Stationary Emergency and Non-Emergency

DIMENSIONS AND WEIGHTS* DEMAND RESPONSE READY

OPEN SET
L x W x H - in (mm) 178.3 (4,528) x 82.6 (2,098) x 110.3 (2,801)
H Weight - lbs (kg) 14,352 - 14,932 (6,510 - 6,773)

L W

WEATHER PROTECTED ENCLOSURE

L x W x H - in (mm) 203.0 (5,156) x 98.0 (2,489) x 156.5 (3,975)
Steel: 18,051 - 18,631 (8,188 - 8,451)
H Weight - lbs (kg)
Aluminum: 17,220 - 17,800 (7,811 - 8,074)

L W

LEVEL 1 SOUND ATTENUATED ENCLOSURE

L x W x H - in (mm) 285.0 (7,239) x 90.9 (2,310) x 156.5 (3,975)
Steel: 21,876 - 22,456 (9,923 - 10,186)
Weight - lbs (kg)
H Aluminum: 19,193 - 19,773 (8,706 - 8,969)

L W

LEVEL 2 SOUND ATTENUATED ENCLOSURE

L x W x H - in (mm) 339.9 (8,634) x 151.7 (3,852) x 156.5 (3,975)
Steel: 22,901 - 23,481 (10,338 - 10,651)
Weight - lbs (kg)
H Aluminum: 19,634 - 20,214 (8,906 - 9,169)

L W

* All measurements are approximate and for estimation purposes only.

YOUR FACTORY RECOGNIZED GENERAC INDUSTRIAL DEALER

SPEC SHEET

Specification characteristics may change without notice. Please contact a Generac Power Systems Industrial Dealer for detailed installation drawings.

6 of 6

Generac Power Systems, Inc. | P.O. Box 8 | Waukesha, WI 53189 Part No. 10000024335
P: (262) 544-4811 ©2020 Generac Power Systems, Inc. All rights reserved. All specifications are subject to change without notice. Rev. D 05/13/2020