Scribd Logo
Upload

Welcome to Scribd!

  • 41 views

    Dupont Vespel Scp-5009: Polyimide Isostatic Shapes

    Uploaded by

    Geoff Lewis

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Dupont Vespel Scp-5009: Polyimide Isostatic Shapes

    Uploaded by

    Geoff Lewis
    41 views2 pages

    Original Title

    Vespel_SCP_5009_en

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    41 views2 pages

    Dupont Vespel Scp-5009: Polyimide Isostatic Shapes

    Uploaded by

    Geoff Lewis

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    DuPont™ Vespel® SCP-5009

    Polyimide Isostatic Shapes

    Typical SCP-5009 ISO Properties- Rev. 2, April 2011

    DuPont™ Vespel® SCP-5009 provides material solutions for high wear and friction applications under high
    operating pressure and elevated temperature environments. Vespel® SCP-5009 shapes have a low
    coefficient of thermal expansion and provide good sealing as well as outstanding mechanical properties
    like high compressive strength and low creep, even at these extreme conditions.
    Some data presented below are based on limited production runs and are subject to revision as new
    knowledge and experience become available.

    Mechanical Property Temperature ASTM Method SI (English) Units Typical Values

    23 °C (73 °F) D638 /D1708 116 (16.9)


    Tensile Strength MPa (kpsi)
    260 °C (500 °F) Specimen 57 (8.4)

    23 °C (73 °F) D638 /D1708 6,003 (871)


    Tensile Modulus MPa (kpsi)
    260 °C (500 °F) Specimen 2,612 (379)

    23 °C (73 °F) D638 /D1708 3.0


    Tensile Elongation %
    260 °C (500 °F) Specimen 9.7

    23 °C (73 °F) 195 (28.3)


    Flexural Strength D790 MPa (kpsi)
    260 °C (500 °F) 99 (14.4)

    23 °C (73 °F) 6,231 (903)


    Flexural Modulus D790 MPa (kpsi)
    260 °C (500 °F) 3,560 (516)

    23 °C (73 °F) 481 (70)


    Compressive Strength D695 MPa (kpsi)
    260 °C (500 °F) 414 (60)

    Compressive Strain, 23 °C (73 °F) 51


    D695 %
    Ultimate 260 °C (500 °F) 66

    23 °C (73 °F) 2,594 (376)


    Compressive Modulus D695 MPa (kpsi)
    260 °C (500 °F) 1,663 (241)

    Compressive Stress
    at 1% Strain 23 °C (73 °F) 31 (4.5)
    D695 MPa (kpsi)
    at 10% Strain 222 (32.2)
    at 0.1% Offset 196 (28.5)

    Compressive Stress
    at 1% Strain 260 °C (500 °F) D695 MPa (kpsi) 19 (2.8)
    at 10% Strain 96 (13.9)
    at 0.1% Offset 45 (6.5)
    DuPont™ Vespel® SCP-5009 ISO Typical Properties (continued)

    ASTM Typical
    Thermal Properties Temperature Pressure SI (English) Units
    Method Values

    Coefficient of Linear 23–300 °C 10–6 m/m·°C 44


    __ E831
    Thermal Expansion (73–572 °F) (10–6 in/in·°F) (24)

    Typical
    Wear Property Velocity Pressure Method SI (English) Units
    Values
    Coefficient of Friction,
    Unlubricated, Air
    25K PV 0.7 m/s (134 fpm) 1.3 MPa (187 kpsi) Falex __ 0.22
    100K PV 2.0 m/s (400 fpm) 1.7 MPa (250 kpsi) 0.14

    ASTM Typical
    Other Properties Temperature Pressure SI (English) Units
    Method Values

    % weight change 0.09


    Water Absorption 23 °C (73 °F) __ D570 % width change 0.14
    % length change 0.14

    Specific Gravity 23 °C (73 °F) __ D792 __ 1.5

    Rockwell “E” Hardness 23 °C (73 °F) __ D785 __ 91

    Deformation under Load


    10 minutes __ 14 MPa (2 kpsi) D621 % 0.01
    24 hours 0.03

    Visit us at kalrez.dupont.com or vespel.dupont.com

    Contact DuPont at the following regional locations:

    North America Latin America Europe, Middle East, Africa


    800-222-8377 +0800 17 17 15 +41 22 717 51 11

    Greater China ASEAN Japan


    +86-400-8851-888 +65-6586-3688 +81-3-5521-8484

    The information set forth herein is furnished free of charge and is based on technical data that DuPont believes to be reliable and falls within the normal
    range of properties. It is intended for use by persons having technical skill, at their own discretion and risk. This data should not be used to establish
    specification limits nor used alone as the basis of design. Handling precaution information is given with the understanding that those using it will satisfy
    themselves that their particular conditions of use present no health or safety hazards. Since conditions of product use and disposal are outside our
    control, we make no warranties, express or implied, and assume no liability in connection with any use of this information. As with any product,
    evaluation under end-use conditions prior to specification is essential. Nothing herein is to be taken as a license to operate or a recommendation to
    infringe on patents.
    Caution: Do not use in medical applications involving permanent implantation in the human body. For other medical applications, discuss with your
    DuPont customer service representative and read Medical Caution Statement H-50103-3.
    Copyright © 2010 DuPont. The DuPont Oval Logo, DuPont™, The miracles of science™, Kalrez®, and Vespel® are trademarks or registered trademarks
    of E.I. du Pont de Nemours and Company or its affiliates. All rights reserved.
    (3/11) Reference No. VPE-A10914-00-D0511

    You might also like