Scribd
Upload
77 views2 pages

DR B R Ambedkar National Institute of Technology, Jalandhar ECX-310, Application of Electronics in Textiles End Semester Examination, July 2020

This document contains instructions for an end semester examination for the course "Application of Electronics in Textiles". It provides details such as the roll number, institute name, course name, date of exam, duration, marks distribution and mapping of questions to course outcomes. The document lists 6 questions related to memory addressing, DAC circuits, counter type ADC, significance of electronics in textiles, assembly language programming and flip flop circuits. Students are instructed to attempt all questions within the given time limit and follow submission guidelines.

Uploaded by

ksh98
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
77 views2 pages

DR B R Ambedkar National Institute of Technology, Jalandhar ECX-310, Application of Electronics in Textiles End Semester Examination, July 2020

This document contains instructions for an end semester examination for the course "Application of Electronics in Textiles". It provides details such as the roll number, institute name, course name, date of exam, duration, marks distribution and mapping of questions to course outcomes. The document lists 6 questions related to memory addressing, DAC circuits, counter type ADC, significance of electronics in textiles, assembly language programming and flip flop circuits. Students are instructed to attempt all questions within the given time limit and follow submission guidelines.

Uploaded by

ksh98
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Roll No…………………..

Dr B R Ambedkar National Institute of Technology, Jalandhar


B. Tech (Textiles Engineering)
ECX-310, Application of Electronics in Textiles
End Semester Examination, July 2020
Duration: 90 Minutes Max. Marks: 30 Date: 23rd July 2020

Marks Distribution & Mapping of Questions with Course Outcomes (COs)


Question Number 1 2 3 4 5 6
Marks 5 4 5 5 6 5
CO No. 3 3 2,4 2 3 1,2
Learning Level 1,2 1 2 3 2,3 2

Note:
1. Attempt all the questions.
2. Write the answers in hard copy (on A4 or any other sheet available)
using blue/black pen with their sign on top and bottom of each page.
Also put page numbers on upper right corner of each page of the
answer booklet.
3. The time allowed for writing examination is 90 minutes. Extra 20
minutes are allowed for scanning and sending the answer booklet.
4. Follow the instructions regarding submission of answer booklet as
issued by examination section.
5. If any information found missing, assume it and mention in the answer
sheet.

1. For the diagram shown in figure 1, there are 16 address lines which
are used for accessing the data from memory chip. What will be the
address range of the chip.
2. For a memory of chip size is 256× 1 bits, How many chips are
required to make up 1K bytes of memory.
3. Write short notes on the following:
(a) Counter type ADC
(b) Significance of electronics in textiles
4. For the given R-2R ladder type DAC in figure 2, Rf = 9 KΩ and R=
1KΩ. Find the analog output voltage.
5. Write the assembly language program for the following for 8085
microprocessor:
a. Write a program to arrange first 10 numbers from memory
address 3000H in an ascending order.
1
b. Write a progrma to find the largest number among 10
numbers.
c. Write a program to find the smallest number among 10.

6. (a) Explain the working of JK flip flop. Also draw its truth table,
characteristic table and excitation table.
(b) Covert JK flip flop in SR flip flop showing proper steps of
conversion.

Figure 1

Figure 2

You might also like