ELECTRONICSANDCOMMUNICATIONENGINEERING

J.N.T.U.
H COLLEGE OF ENGINEERING HYDERABAD

(AUTONOMOUS)
B.TECH. ECE FOUR YEAR DEGREE COURSE
(ELECTRONICS AND COMMUNICATION ENGINEERING)
COURSE STRUCTURE
I YEAR I SEMESTER
Course
S. No. Course Title L T P Credits
Type
1 BSC Mathematics-I (Linear Algebra and Calculus) 3 1 0 4
2 ESC Basic Electrical Engineering 3 0 0 3
3 BSC Engineering Chemistry 3 1 0 4
4 HSMC English 2 0 0 2
5 ESC Basic Electrical Engineering Lab 0 0 2 1
6 BSC Engineering Chemistry Lab 0 0 3 1.5
7 HSMC English Language and Communication Skills Lab 0 0 2 1
8 ESC Engineering Workshop 1 0 3 2.5
Total 12 02 10 19
I YEAR II SEMESTER
Course
S. No. Course Title L T P Credits
Type
1 BSC Mathematics-II (Advanced Calculus) 3 1 0 4
2 BSC Applied Physics 3 1 0 4
3 ESC Programming for Problem Solving 3 0 0 3
4 ESC Engineering Graphics 1 0 4 3
5 BSC Applied Physics Lab 0 0 3 1.5
6 ESC Programming for Problem Solving Lab 0 0 3 1.5
Total 10 02 10 17
J.N.T.U.H COLLEGE OF ENGINEERING HYDERABAD
(AUTONOMOUS)
COURSE STRUCTURE
II YEAR I SEMESTER
S.No. Course Subject L T P Credits

Type
1 PC Electronic Devices and Circuits 3 1 0 4
2 ESC Network Analysis & Transmission
3 0 0 3
Lines
3 PC Signals and Systems 3 1 0 4
4 PC Switching Theory and Logic Design 3 1 0 4
5 ESC Probability Theory and Stochastic
3 0 0 3
Processes
6 PC Electronic Devices and Circuits Lab 0 0 2 1
7 PC Digital Logic Design Lab 0 0 2 1
8 PC Basic Simulation Lab 0 0 2 1
9 MC Environmental Science 2 0 0 0
Total 17 03 06 21
II YEAR II SEMESTER

Type
1 BSC Mathematics-III (Numerical Methods
3 1 0 4
and Complex Variables)
2 PC Electromagnetic Fields and Waves
3 0 0 3
3 PC Analog and Digital Communications
3 1 0 4
4 PC Linear and Digital Integrated Circuits
3 0 0 3
5 PC Analog and Pulse Circuits
3 1 0 4
6 PC Analog and Digital Communications
0 0 2 1
Lab
7 PC Linear and Digital Integrated Circuits
0 0 2 1
Lab
8 PC Analog and Pulse Circuits Lab 0 0 2 1
9 MC Indian Constitution 2 0 0 0
Total 17 03 06 21
(AUTONOMOUS)
COURSE STRUCTURE
III YEAR I SEMESTER

Type
1 HSMC Business Economics & Financial
3 0 0 3
Analysis
2 PC Microprocessors and Controllers 3 1 0 4
3 PC Computer Networks 3 1 0 4
4 ESC Control Systems 3 1 0 4
5 PE 1 Professional Elective - 1 3 0 0 3
6 PC Microprocessors and Controllers Lab 0 0 3 1.5
7 PC Computer Networks Lab 0 0 3 1.5
8 HSMC Advanced English Language and
0 0 2 1
Communication Skills Lab
Total 17 03 08 22
III YEAR II SEMESTER

Type
1 PC Antennas and Propagation 3 1 0 4
2 PC Digital Signal Processing 3 1 0 4
3 PC VLSI Design 3 1 0 4
5 OE 1 Open Elective - 1 3 0 0 3
6 PC Digital Signal Processing Lab 0 0 3 1.5
7 PC VLSI Design Lab 0 0 3 1.5
8 PC Advanced Communications Lab 0 0 2 1
Total 17 03 08 22
Summer between III & IV Year: Industry Oriented Mini Project

(AUTONOMOUS)
COURSE STRUCTURE
IV YEAR I SEMESTER

Type
1 PC Microwave Engineering 2 0 0 2
3 PE 4 Professional Elective - 4
3 0 0 3
5 PC Microwave Engineering Lab 0 0 2 1
6 HSMC Management Fundamentals for
3 0 0 3
Engineers
7 Project Project Phase - 1 0 0 6 3
8 Project Mini Project - - - 2
9 Project Seminar 0 0 2 1
Total 14 00 10 21
IV YEAR II SEMESTER

Type
3 0 0 3
3 0 0 3
4 Project Project Phase - 2 0 0 16 8
Total 09 00 16 17
Professional Elective – 1
1. Operating Systems
2. OOPS through Java
3. Data Analytics
Professional Elective - 2
1. Cellular and Mobile Communications
2. Information Theory and Coding
3. Neural Networks & Applications
1. Digital Image Processing
2. Speech Processing
3. Scripting Languages
1. Network Security and Cryptography
2. Bio-Medical Electronics
3. Electronic Measurements and Instrumentation
1. Radar Systems
2. EMI & EMC
3. Optical Communications
1. Satellite Communications
2. Nano Materials and Technology
3. Television Engineering
Open Elective - 1
System Design through IoT
Open Elective - 2
Electronic Sensors
Open Elective - 3
Principles of Communications
MATHEMATICS - I
(LINEAR ALGEBRA AND CALCULUS)
I Year B.Tech. I-Sem L T P C

3 1 0 4
Pre-requisites: Mathematical Knowledge of 12th / intermediate level

Course Objectives:
1. Types of matrices and their properties.
2. Concept of a rank of the matrix and applying this concept to know the consistency and solving
the system of linear equations.
3. Concept of Eigen values and Eigenvectors and to reduce the quadratic form to canonical form
4. Concept of Sequence.
5. Concept of nature of the series.
6. Geometrical approach to the mean value theorems and their application to the mathematical
problems
7. Evaluation of surface areas and volumes of revolutions of curves.
8. Evaluation of improper integrals using Beta and Gamma functions.
9. Partial differentiation, concept of total derivative
10. Finding maxima and minima of function of two and three variables.
Course Outcomes: After learning the contents of this paper the student must be able to
1. Write the matrix representation of a set of linear equations and to analyze the solution of the
system of equations
2. Find the Eigen values and Eigenvectors
3. Reduce the quadratic form to canonical form using orthogonal transformations.
4. Analyze the nature of sequence and series.
5. Solve the applications on the mean value theorems.
6. Evaluate the improper integrals using Beta and Gamma functions
7. Find the extreme values of functions of two variables with/ without constraints.
UNIT-I: MATRICES Types of Matrices, Symmetric; Hermitian ; Skew-symmetric; Skew-

Hermitian; orthogonal matrices; Unitary Matrices; Rrank of a matrix by Echelon form and
Normal form, Inverse of Non-singular matrices by Gauss-Jordan method; System of linear
equations; solving system of Homogeneous and Non Homogeneous equations, Gauss elimination
method; Gauss Seidel Iteration Method.
UNIT-II: EIGEN VALUES AND EIGEN VECTORS Linear Transformation and Orthogonal
Transformation: Eigen values and Eigenvectors and their properties: Diagonalization of a matrix;
Cayley-Hamilton Theorem (without proof); finding inverse and power of a matrix by Cayley-
Hamilton Theorem; Quadratic forms and Nature of the Quadratic Forms; Reduction of Quadratic
form to canonical forms by Orthogonal Transformation
UNIT-III: SEQUENCES& SERIES Sequence: Definition of a Sequence, limit; Convergent,

Divergent and Oscillatory sequences. Series: Convergent, Divergent and Oscillatory Series;
Series of positive terms; Comparison test, p-test, D Alembert’s ratio test; Raabe’s test; Cauchy’s
Integral test; Cauchy’s root test; logarithmic test. Alternating series: Leibnitz test; Alternating
Convergent series: Absolute and Conditionally Convergence.
UNIT-IV: CALCULUS Mean value theorems: Rolle’s Theorem, Lagrange’s Mean value
theorem with their Geometrical Interpretation and applications, Cauchy’s Mean value Theorem.
Taylor’s Series. Applications of definite integrals to evaluate surface areas and volumes of
revolutions of curves (Only in Cartesian coordinates), Definition of Improper Integral: Beta and
Gamma functions and their applications.
UNIT-V: MULTIVARIABLE CALCULUS (PARTIAL DIFFERENTIATION AND

APPLICATIONS) Definitions of Limit and continuity. Partial Differentiation; Euler’s Theorem;
Total derivative; Jacobian; Functional dependence & independence, Maxima and Minima of
functions of two variables and three variables using method of Lagrange multipliers.
TEXT BOOKS:
1. B.S. Grewal, Higher Engineering Mathematics, Khanna Publishers, 36th Edition, 2010 2.
Erwin kreyszig, Advanced Engineering Mathematics, 9th Edition, John Wiley & Sons,2006.
REFERENCES:
1. G.B. Thomas and R.L. Finney, Calculus and Analytic geometry, 9thEdition,Pearson, Reprint,
2002.
2. N.P. Bali and Manish Goyal, A text book of Engineering Mathematics, LaxmiPublications,
Reprint, 2008.
3. Ramana B.V., Higher Engineering Mathematics, Tata McGraw Hill New Delhi,11thReprint,
2010.
BASIC ELECTRICAL ENGINEERING

3 0 0 3
Pre-requisites: --
Course Objectives:
1. To introduce the concepts of electrical circuits and its components
2. To understand magnetic circuits, DC circuits and AC single phase & three phase circuits
3. To study and understand the different types of DC/AC machines and Transformers.
4. To import the knowledge of various electrical installations.
5. To introduce the concept of power, power factor and its improvement.
Course Outcomes:
1. To analyze and solve electrical circuits using network laws and theorems.
2. To understand and analyze basic Electric and Magnetic circuits
3. To study the working principles of Electrical Machines
4. To introduce components of Low Voltage Electrical Installations
UNIT-I: D.C. CIRCUITS Electrical circuit elements (R, L and C), voltage and current sources,
KVL&KCL, analysis of simple circuits with dc excitation. Superposition, Thevenin and Norton
Theorems. Time-domain analysis of first-order RL and RC circuits.
UNIT-II: A.C. CIRCUITS Representation of sinusoidal waveforms, peak and rms values,
phasor representation, real power, reactive power, apparent power, power factor, Analysis of
single-phase ac circuits consisting of R, L, C, RL, RC, RLC combinations (series and parallel),
resonance in series R-L-C circuit. Three-phase balanced circuits, voltage and current relations in
star and delta connections.
UNIT-III: TRANSFORMERS Ideal and practical transformer, equivalent circuit, losses in
transformers, regulation and efficiency. Autotransformer and three-phase transformer
connections.
UNIT-IV: ELECTRICAL MACHINES Generation of rotating magnetic fields, Construction

and working of a three-phase induction motor, Significance of torque-slip characteristic. Loss
components and efficiency, starting and speed control of induction motor. Single-phase
induction motor. Construction, working, torque-speed characteristic and speed control of
separately excited dc motor. Construction and working of synchronous generators.
UNIT-V: ELECTRICAL INSTALLATIONS Components of LT Switchgear: Switch Fuse Unit

(SFU), MCB, ELCB, MCCB, Types of Wires and Cables, Earthing. Types of Batteries,
Important Characteristics for Batteries. Elementary calculations for energy consumption, power
factor improvement and battery backup.
TEXT BOOKS:
1. D. P. Kothari and I. J. Nagrath, “Basic Electrical Engineering”, Tata McGraw Hill, 2010.
2. D. C. Kulshreshtha, “Basic Electrical Engineering”, McGraw Hill, 2009.
REFERENCES:
1. L. S. Bobrow, “Fundamentals of Electrical Engineering”, Oxford University Press, 2011.
2. E. Hughes, “Electrical and Electronics Technology”, Pearson, 2010.
3. V. D. Toro, “Electrical Engineering Fundamentals”, Prentice Hall India, 1989.
ENGINEERING CHEMISTRY

3 1 0 4
Course Objectives:
1. To bring adaptability to the concepts of chemistry and to acquire the required skills to
become a perfect engineer.
2. To impart the basic knowledge of atomic, molecular and electronic modifications which
makes the student to understand the technology based on them.
3. To acquire the knowledge of electrochemistry, corrosion and water treatment which are
essential for the Engineers and in industry.
4. To acquire the skills pertaining to spectroscopy and to apply them for medical field etc.
5. To impart then knowledge of stereochemistry and synthetic aspects useful for
understanding reaction pathways
Course Outcomes: The basic concepts included in this course will help the student to gain:
1. The knowledge of atomic, molecular and electronic changes, band theory related to
conductivity.
2. The required principles and concepts of electrochemistry, corrosion and in understanding
the problem of water and its treatments.
3. The required skills to get clear concepts on basic spectroscopy and application to medical
field etc.
4. The knowledge and configurationally and conformational analysis of molecules and
reaction mechanisms.
UNIT-I: MOLECULAR STRUCTURE AND THEORIES OF BONDING Atomic and

Molecular orbitals. Linear Combination of Atomic Orbitals (LCAO), molecular orbitals of
diatomic molecules, molecular orbital energy level diagrams of N2, O2 and F2 molecules. π
Molecular orbitals of butadiene and benzene. Crystal Field Theory (CFT): Salient Features of
CFT – Crystal Field Splitting of transition metal ion d- orbitals in Tetrahedral, Octahedral and
square planar geometries. Band structure of solids and effect of doping on conductance.
UNIT-II: WATER AND ITS TREATMENT Introduction – hardness of water – Causes of

hardness . Types of hardness: temporary and permanent. Expression and units of hardness.
Estimation of hardness of water by complex metric method. Potable water and its specifications.
Steps involved in treatment of water – Disinfection of water by chlorination and ozonization.
Boiler feed water and its treatment. Calgon conditioning, Phosphate conditioning and Colloidal
conditioning. External treatment of water. Ion exchange process. Desalination of water – Reverse
osmosis. Numerical problems.
UNIT-III: ELECTROCHEMISTRY AND CORROSION Electro chemical cells – electrode

potential, standard electrode potential, types of electrodes – calomel, Quinhydrone and glass
electrode. Nernst equation Determination of pH of a solution by using quinhydrone and glass
electrode. Electrochemical series and its applications. Numerical problems. Potentiometric
titrations. Batteries – Primary (Lithium cell) and secondary batteries (Lead – acid storage battery
and Lithium ion battery). Causes and effects of corrosion – theories of chemical and
electrochemical corrosion – mechanism of electrochemical corrosion. Types of corrosion:
Galvanic, water-line and pitting corrosion. Factors affecting rate of corrosion, Corrosion control
methods- Cathodic protection – Sacrificial anode and impressed current cathodic methods.
Surface coatings – metallic coatings –Methods of coating- Hot dipping, cementation – methods
of application. Electroless plating and Electroless plating of Copper.
UNIT-IV: STEREOCHEMISTRY, REACTION MECHANISM AND SYNTHESIS OF DRUG

MOLECULES Introduction to representation of 3-dimensional structures, Structural and
stereoisomers, configurations, symmetry and chirality. Enantiomers, diastereomers, optical
activity and Absolute configuration. Conformation alanalysis of n- butane. Substitution
reactions: Nucleophilic substitution reactions: Mechanism of SN1, SN2 reactions. Electrophilic
and nucleophilic addition reactions: Addition of HBr to propene. Markownikoff and anti
Markownikoff’s additions. Grignard additions on carbonyl compounds. Elimination reactions:
Dehydro halogenation of alkylhalides. Saytzeff rule. Oxidation reactions: Oxidation of alcohols
using KMnO4 and chromic acid. Reduction reactions: reduction of carbonyl compounds using
LiAlH4 & NaBH4. Hydroboration of olefins. Structure, synthesis and pharmaceutical
applications of Paracetamol and Aspirin.
UNIT-V: SPECTROSCOPIC TECHNIQUES AND APPLICATIONS Principles of electronic

spectroscopy: Beer’s Lamberts law, numerical problems. Types of electronic excitations.
Applications of uv-visible spectroscopy. IR Spectroscopy: Principle, modes of vibrations,
selection rules, Force constant, some common organic Functional groups wave no. regions (C-
H,NH,OH, -COOH, C=0, CN, c+C and CC) Applications of IR Spectroscopy, H NMR (
NMR Spectroscopy) Principle of NMR spectroscopy Chemical shift, chemical shifts of some
common organic protons. Introduction to MRI.
TEXT BOOKS:
1. Text book of Engineering Chemistry by Jain & Jain, Dhanpat Rai Publishing
company(P)Ltd.,New Delhi..
2. Text Book of Engineering Chemistry Shashi Chawla, Dhanpat Rai Publishing
company(P)Ltd.,New Delhi..
REFERENCES:
1. Physical Chemistry, by P.W. Atkins
2. Engineering Chemistry (NPTEL Web-book), by B.L. Tembe, Kamaluddin and M.S. Krishnan
3. University Chemistry, by B.H. Mahan
4. Fundamentals of Molecular Spectroscopy, by C.N. Banwell
5. Organic Chemistry: Structure and Function by K.P.C. Volhardt and N.E.Schore, 5th Edition.
ENGLISH

2 0 0 2
INTRODUCTION
In view of the growing importance of English as a tool for global communication and the
consequent emphasis on training students to acquire language skills, the syllabus of English has
been designed to develop linguistic, communicative and critical thinking competencies of
Engineering students. In English classes, the focus should be on the skills development in the
areas of vocabulary, grammar, reading and writing. For this, the teachers should use the
prescribed text for detailed study. The students should be encouraged to read the texts leading to
reading comprehension and different passages may be given for practice in the class. The time
should be utilized for working out the exercises given after each excerpt and for supplementing
the exercises with authentic materials of a similar kind, for example, newspaper articles,
advertisements, promotional material etc. The focus in this syllabus is on skill development in
the areas of Vocabulary, Grammar, Reading and Writing Skills, fostering ideas and practice of
language skills in various contexts.
LEARNING OBJECTIVES : The course will help students to

1. Improve the language proficiency of students in English with an emphasis on
Vocabulary, Grammar, Reading and Writing skills.
2. Equip students to study academic subjects more effectively and critically using the
theoretical and practical components of English syllabus.
3. Develop study skills and communication skills in formal and informal situations.
COURSE OUTCOMES : Students should be able to

1. Use English Language effectively in spoken and written forms.
2. Comprehend the given texts and respond appropriately.
3. Communicate confidently in various contexts and different cultures.
4. The student will acquire basic proficiency in English including reading and listening
comprehension, writing and speaking skills.
SYLLABUS
 (Note: As the syllabus of English given in AICTE Model Curriculum-2018 for B.Tech First
Year is Open-ended, it is required to prepare teaching/learning materials by the teachers
collectively in the form of handouts based on the needs of the students in their respective
colleges for effective teaching/learning and timesaving in the class.)
Unit –I: Vocabulary Building: The Concept of Word Formation --The Use of Prefixes and
Suffixes. Grammar: Identifying Common Errors in Writing with Reference to Articles and
Prepositions. Reading: Reading and Its Importance- Techniques for Effective Reading. Basic
Writing Skills: Sentence Structures -Use of Phrases and Clauses in Sentences- Importance of
Proper Punctuation- Techniques for Writing Precisely – Paragraph writing – Types, Structures
and Features of a Paragraph - Creating Coherence.
Unit –II : Vocabulary: Synonyms and Antonyms. Grammar: Identifying Common Errors in
Writing with Reference to Noun-pronoun Agreement and Subject-verb Agreement. Reading:
Improving Comprehension Skills – Techniques for Good Comprehension.
Writing: Format of a Formal Letter-Writing Formal Letters E.g.., Letter of Complaint, Letter of
Requisition, Job Application with Resume.
Unit –III Vocabulary: Acquaintance with Prefixes and Suffixes from Foreign Languages in
English to form Derivatives-Words from Foreign Languages and their Use in English.
Grammar: Identifying Common Errors in Writing with Reference to Misplaced Modifiers and
Tenses. Reading: Sub-skills of Reading- Skimming and Scanning Writing: Writing Introduction
and Conclusion - Essay Writing.
Unit –IV Vocabulary: Standard Abbreviations in English Grammar: Redundancies and Clichés
in Oral and Written Communication. Reading: Comprehension- Intensive Reading and
Extensive Reading. Writing: Writing Practices---Précis Writing.
Unit –V Vocabulary: Technical Vocabulary and their usage Grammar: Common Errors in
English Reading: Reading Comprehension-Exercises for Practice Writing: Technical Reports-
Introduction – Characteristics of a Report – Categories of Reports Formats- Structure of
Reports (Manuscript Format) -Types of Reports - Writing a Report. Note: Listening and
Speaking skills which are given under Unit-6 are covered in the syllabus of ELCS Lab Course.
References: i. Practical English Usage. Michael Swan. OUP. Fourth Edition 2016. ii.
Communication Skills. Sanjay Kumar and Pushp Lata. Oxford University Press. 2018. iii.
English: Context and Culture by Board of Editors published by Orient BlackSwan Pvt. Ltd. iv.
Remedial English Grammar. F.T. Wood. Macmillan.2007. v. On Writing Well. William Zinsser.
Harper Resource Book. 2001 vi. Study Writing. Liz Hamp-Lyons and Ben Heasley. Cambridge
University Press. 2006. vii. Exercises in Spoken English. Parts I –III. CIEFL, Hyderabad. Oxford
University Press
BASIC ELECTRICAL ENGINEERING LAB

0 0 2 1
Pre-requisites: Basic Electrical Engineering
Course Objectives:
1. To analyze a given network by applying various electrical laws and network theorems
2. To know the response of electrical circuits for different excitations
3. To calculate, measure and know the relation between basic electrical parameters.
4. To analyze the performance characteristics of DC and AC electrical machines
Course Outcomes:
1. Get an exposure to basic electrical laws.
2. Understand the response of different types of electrical circuits to different excitations.
3. Understand the measurement, calculation and relation between the basic electrical
parameters
4. Understand the basic characteristics of transformers and electrical machines.
List of experiments/demonstrations:
1. Verification of Ohms Law

2. Verification of KVL and KCL
3. Transient Response of Series RL and RC circuits for DC excitation
4. Transient Response of RLC Series circuit for DC excitation
5. Resonance in series RLC circuit
6. Calculations and Verification of Impedance and Current of RL, RC and RLC series circuits
7. Measurement of Voltage, Current and Real Power in primary and Secondary Circuits of a
Single Phase Transformer
8. Load Test on Single Phase Transformer (Calculate Efficiency and Regulation)
9. Three Phase Transformer: Verification of Relationship between Voltages and Currents
(StarDelta, Delta-Delta, Delta-star, Star-Star)
10. Measurement of Active and Reactive Power in a balanced Three-phase circuit
11. Performance Characteristics of a Separately/Self Excited DC Shunt/Compound Motor
12. Torque-Speed Characteristics of a Separately/Self Excited DC Shunt/Compound Motor
13. Performance Characteristics of a Three-phase Induction Motor
14. Torque-Speed Characteristics of a Three-phase Induction Motor
15. No-Load Characteristics of a Three-phase Alternator
TEXT BOOKS:
1. D. P. Kothari and I. J. Nagrath, “Basic Electrical Engineering”, Tata McGraw Hill, 2010.
2. D. C. Kulshreshtha, “Basic Electrical Engineering”, McGraw Hill, 2009.
REFERENCES:
1. L. S. Bobrow, “Fundamentals of Electrical Engineering”, Oxford University Press, 2011.
2. E. Hughes, “Electrical and Electronics Technology”, Pearson, 2010.
3. V. D. Toro, “Electrical Engineering Fundamentals”, Prentice Hall India, 1989.
ENGINEERING CHEMISTRY LAB
0 0 3 1.5
Course Objectives: The chemistry laboratory course consists of experiments related to the
principles of chemistry required to the engineering student. The course will make the student to
learn:
1. Estimation of hardness and chloride content in water to check its suitability for drinking
purpose.
2. To determine the rate constant of reactions from concentrations as an function of time.
3. The measurement of physical properties like adsorption and viscosity.
4. To synthesize the drug molecules and check the purity of organic molecules by thin layer
chromatographic (TLC) technique.
Course Outcomes: The experiments included in the chemistry laboratory will make the student
to gain the skills on
1. Determination of parameters like hardness and chloride content in water.
2. Estimation of rate constant of a reaction from concentration – time relationships.
3. Determination of physical properties like adsorption and viscosity.
4. Calculation of Rf values of some organic molecules by TLC technique.
List of Experiments:
1. Determination of total hardness of water by complexometric method using EDTA
2. Determination of chloride content of water by Argentometry
3. Estimation of an HCl by Conductometric titrations
4. Estimation of Acetic acid by Conductometric titrations
5. Estimation of HCl by Potentiometric titrations
6. Estimation of Fe2+ by Potentiometry using KMnO4
7. Determination of rate constant of acid catalysed hydrolysis of methyl acetate
8. Synthesis of Aspirin and Paracetamol
9. Thin layer chromatography calculation of Rf values. eg ortho and para nitro phenols
10. Determination of acid value of coconut oil
11. Verification of freundlich adsorption isotherm-adsorption of acetic acid on charcoal
12. Determination of viscosity of castor oil and ground nut oil by using Ostwald’s viscometer.
13. Determination of partition coefficient of acetic acid between n-butanol and water.
14. Determination of surface tension of a give liquid using stalagmometer.
REFERENCES: 1. Senior practical physical chemistry, B.D. Khosla, A. Gulati and V. Garg (R.
Chand & Co., Delhi) 2. An introduction to practical chemistry, K.K. Sharma and D. S. Sharma
(Vikas publishing, N. Delhi) 3. Vogel’s text book of practical organic chemistry 5th edition 4.
Text book on Experiments and calculations in Engineering chemistry – S.S. Dara
ENGLISH LANGUAGE AND COMMUNICATION SKILLS LAB

0 0 2 1
The Language Lab focuses on the production and practice of sounds of language and familiarizes
the students with the use of English in everyday situations both in formal and informal contexts.
Course Objectives
1. To facilitate computer-assisted multi-media instruction enabling individualized and
independent language learning
2. To sensitize students to the nuances of English speech sounds, word accent, intonation
and rhythm
3. To bring about a consistent accent and intelligibility in students’ pronunciation of English
by providing an opportunity for practice in speaking
4. To improve the fluency of students in spoken English and neutralize their mother tongue
influence
5. To train students to use language appropriately for public speaking and interviews
Course Outcomes - Students will be able to attain Better understanding of nuances of English
language through audio- visual experience and group activities
Neutralization of accent for intelligibility
Speaking skills with clarity and confidence which in turn enhances their employability skills
Syllabus English Language and Communication Skills Lab (ELCS) shall have two parts:
a. Computer Assisted Language Learning (CALL) Lab
b. Interactive Communication Skills (ICS) Lab
Listening Skills Objectives

1. To enable students, develop their listening skills so that they may appreciate its role in the
LSRW skills approach to language and improve their pronunciation
2. To equip students with necessary training in listening so that they can comprehend the speech
of people of different backgrounds and regions Students should be given practice in listening to
the sounds of the language, to be able to recognize them and find the distinction between
different sounds, to be able to mark stress and recognize and use the right intonation in
sentences.
• Listening for general content
• Listening to fill up information
• Intensive listening
• Listening for specific information
Speaking Skills Objectives 1. To involve students in speaking activities in various contexts
2. To enable students express themselves fluently and appropriately in social and professional
contexts • Oral practice: Just A Minute (JAM) Sessions • Describing objects/situations/people •
Role play – Individual/Group activities
The following course content is prescribed for the English Language and Communication Skills
Lab based on Unit-6 of AICTE Model Curriculum 2018 for B.Tech First English. As the
syllabus is very limited, it is required to prepare teaching/learning materials by the teachers
collectively in the form of handouts based on the needs of the students in their respective
colleges for effective teaching/learning and timesaving in the Lab)
Exercise – I CALL Lab: Understand: Listening Skill- Its importance – Purpose- Process-
Types- Barriers of Listening. Practice: Introduction to Phonetics – Speech Sounds – Vowels and
Consonants. ICS Lab: Understand: Communication at Work Place- Spoken vs. Written
language. Practice: Ice-Breaking Activity and JAM Session- Situational Dialogues – Greetings –
Taking Leave – Introducing Oneself and Others.
Exercise – II CALL Lab: Understand: Structure of Syllables – Word Stress and Rhythm–
Weak Forms and Strong Forms in Context. Practice: Basic Rules of Word Accent - Stress Shift -
Weak Forms and Strong Forms in Context. ICS Lab: Understand: Features of Good
Conversation – Non-verbal Communication. Practice: Situational Dialogues – Role-Play-
Expressions in Various Situations –Making Requests and Seeking Permissions - Telephone
Etiquette.
Exercise - III CALL Lab: Understand: Intonation-Errors in Pronunciation-the Influence of
Mother Tongue (MTI). Practice: Common Indian Variants in Pronunciation – Differences in
British and American Pronunciation. ICS Lab: Understand: How to make Formal Presentations.
Practice: Formal Presentations.
Exercise – IV CALL Lab: Understand: Listening for General Details. Practice: Listening
Comprehension Tests. ICS Lab: Understand: Public Speaking – Exposure to Structured Talks.
Practice: Making a Short Speech – Extempore.
Exercise – V CALL Lab: Understand: Listening for Specific Details. Practice: Listening
Comprehension Tests.
ICS Lab: 1. Introduction to Interview Skills. 2. Common errors in speaking.

Minimum Requirement of infrastructural facilities for ELCS Lab: 1. Computer Assisted
Language Learning (CALL) Lab: The Computer Assisted Language Learning Lab has to
accommodate 40 students with 40 systems, with one Master Console, LAN facility and English
language learning software for self- study by students.
System Requirement (Hardware component): Computer network with LAN facility (minimum
40 systems with multimedia) with the following specifications: i) Computers with Suitable
Configuration ii) High Fidelity Headphones
2. Interactive Communication Skills (ICS) Lab: The Interactive Communication Skills Lab: A
Spacious room with movable chairs and audio-visual aids with a Public-Address System, a LCD
and a projector etc.
************
ENGINEERING WORKSHOP
1 0 3 2.5
Pre-requisites: Practical skill
Course Objectives:
1. To Study of different hand operated power tools, uses and their demonstration.
2. To gain a good basic working knowledge required for the production of various engineering
products.
3. To provide hands on experience about use of different engineering materials, tools, equipment
and processes those are common in the engineering field.
4. To develop a right attitude, team working, precision and safety at work place.
5. It explains the construction, function, use and application of different working tools,
equipment and machines.
6. To study commonly used carpentry joints.
7. To have practical exposure to various welding and joining processes.
8. Identify and use marking out tools, hand tools, measuring equipment and to work to prescribed
tolerances.
9. To understand the computer hardware and practice the Assembly of computer parts.
10. To practice the process of Installation of operating system windows.
I. TRADES FOR EXERCISES: (Any six trades from the following with minimum of two
exercises in each trade) 1. Carpentry – 2 Lectures 2. Fitting- 1Lecture 3. Tin-Smithy- 1Lecture 4.
Black Smithy-1Lecture 5. House-wiring-1Lecture 6. Foundry- 2 Lectures 7. Plumbing-1Lecture
II. Trades for Demonstration & Exposure 1. Demonstration of power tools -1 Lecture 2. Welding
– 2 Lecture 3. Machine Shop -2 Lectures III. IT Workshop I: Computer hardware, identification
of parts, Disassembly, Assembly of computer to working condition, simple diagnostic exercises.
IT Workshop II: Installation of operating system windows and linux simple diagnostic exercises.
Text Books: 1. Workshop Practice by B.L.Juneja Cengage Learning 2. Elements of Workshop
Technology–S. K.Hajra Choudhury and A. K. Hajra Choudhury.
Course Outcomes: At the end of the course, the student will be able to: 1. Practice on
manufacturing of components using workshop trades including pluming, fitting, carpentry,
foundry, house wiring and welding. 2. Identify and apply suitable tools for different trades of
Engineering processes including drilling, material removing, measuring, chiseling. 3. Apply
basic electrical engineering knowledge for house wiring practice.
MATHEMATICS-II
(ADVANCED CALCULUS)
I Year B.Tech. II-Sem L T P C

3 1 0 4
Pre-requisites: Mathematical Knowledge of 12th / intermediate level
Course Objectives:
1. Methods of solving the differential equations of first and higher order.
2. Evaluation of multiple integrals and their applications
3. The physical quantities involved in engineering field related to vector valued functions
4. The basic properties of vector valued functions and their applications to line, surface and
volume integrals
Course Outcomes: After learning the contents of this paper the student must be able to:
Identify whether the given differential equation of first order is exact or not
Solve higher differential equation and apply the concept of differential equation to real world
problems  Evaluate the multiple integrals and apply the concept to find areas, volumes, centre
of mass and gravity for cubes, sphere and rectangular parallel piped  Evaluate the line, surface
and volume integrals and converting them from one to another
UNIT-I: FIRST ORDER ODE Exact, linear and Bernoulli’s equations; Applications: Newton’s
law of cooling, Law of natural growth and decay; Equations not of first degree: equations
solvable for p, equations solvable for y, equations solvable for x and Clairaut’s type
UNIT-II: ORDINARY DIFFERENTIAL EQUATIONS OF HIGHER ORDER Second order
linear differential equations with constant coefficients: Non-Homogeneous terms of the type
polynomials in , and ; method of variation of parameters; Equations reducible to linear ODE
with constant coefficients: Legendre’s equation, Cauchy-Euler equation.
UNIT-III: MULTIVARIABLE CALCULUS (INTEGRATION) Evaluation of Double
Integrals (Cartesian and polar coordinates); change of order of integration (only Cartesian form);
Evaluation of Triple Integrals: Change of variables (Cartesian to polar) for double and (Cartesian
to Spherical and Cylindrical polar coordinates) for triple integrals. APPLICATIONS: Areas (by
double integrals) and volumes (by double integrals and triple integrals), Centre of mass and
Gravity (constant and variable densities) by double and triple integrals (applications involving
cubes, sphere and rectangular parallel piped).
UNIT-IV: VECTOR DIFFERENTIATION Vector point functions and scalar point functions.
Gradient, Divergence and Curl. Directional derivatives, Tangent plane and normal line. Vector
Identities. Scalar potential functions. Solenoidal and Irrotational vectors
UNIT-V: VECTOR INTEGRATION Line, Surface and Volume Integrals. Theorems of Green,
Gauss and Stokes (without proofs) and their applications
TEXT BOOKS:
1. B.S. Grewal, Higher Engineering Mathematics, Khanna Publishers, 36th Edition, 2010 2.
Erwin kreyszig, Advanced Engineering Mathematics, 9th Edition, John Wiley & Sons,2006
REFERENCES:
1. G.B. Thomas and R.L. Finney, Calculus and Analytic geometry, 9thEdition,Pearson, Reprint,
2002
2. Paras Ram, Engineering Mathematics, 2nd Edition, CBS Publishes 3. S. L. Ross, Differential
Equations, 3rd Ed., Wiley India, 1984.
APPLIED PHYSICS

3 1 0 4
Course Objectives:
1. Understand basic principle of quantum mechanics
2. Gain the knowledge of carrier concentration and recombination process of semiconductor
materials.
3. Learn about various types of optoelectronic devices
4. Various types of lasers and significance of optical fibers in communication system
5. Learn about material properties like dielectrics and magnetic materials.
Course Outcomes:
1. Analyze the wave particle duality and about energy levels and uncertainty principle
2. Evaluate the mobility of charge carrier concentration of a given semiconductor material.
3. Justify how the graded index optical fiber is more efficient than step index optical fiber in
fiber optic communication system.
4. Will be to learn about working of LED, solar cell and photo detector
5. Gain the knowledge and applications of dielectric and magnetic materials
UNIT-I: QUANTUM MECHANICS Introduction to quantum physics, Black body radiation,

Planck’s law, photoelectric effect Compton effect, wave-particle duality, de Broglie hypothesis,
Davisson and Germer experiment, Heisenberg’s uncertainty principle, Born’s interpretation of
the wave function, Schrodinger’s time independent wave equation, particle in one dimensional
box, potential barrier.
UNIT-II: SEMICONDUCTOR PHYSICS Intrinsic and extrinsic semiconductors: Estimation

of carrier-concentration, Dependence of Fermi level on carrier-concentration and variation with
temperature, Carrier generation and recombination, Carrier transport: diffusion and drift, Hall
Effect, p-n junction diode: I-V Characteristics, Zener diode: I-V Characteristics, Bipolar Junction
Transistor (BJT): Construction, Principle of operation and characteristics.
UNIT-III: OPTOELECTRONICS Radiative, Non-radiative transitions and recombination

mechanism in semiconductors, LED and Semiconductor lasers: Device structure, materials,
Characteristics, Semiconductor photo-detectors: PIN and Avalanche detectors and their structure,
Materials, Working principle and Characteristics, Solar cell: structure and Characteristics.
UNIT- IV: LASERS AND FIBRE OPTICS Lasers: Introduction, Interaction of radiation with
matter: Absorption, Spontaneous and Stimulated emission, Einstein coefficients, Characteristics
of lasers: Resonating cavity, Active medium, pumping, population inversion, Construction and
working of laser: Ruby laser, He-Ne laser, applications of lasers. Fiber Optics: Introduction,
Principle and Construction of an optical fiber, Acceptance angle, Numerical aperture, Types of
fiber, losses associated with optical fibers, Basic components in optical fiber communication
system, Applications of optical fibers.
UNIT-V: DIELECTRIC AND MAGNETIC PROPERTIES OF MATERIALS Dielectrics:
Introduction, Types of polarizations (Electronic, Ionic and Orientation Polarizations) and
calculation of their polarizabilities, internal fields in a solid, Clausius-Mossotti relation.
Magnetism: Introduction, Bohr magneton, classification of Dia, Para and Ferro magnetic
materials on the basis of magnetic moment, Hysteresis curve based on domine theory, Soft and
hard magnetic materials, Properties of anti-Ferro and ferri magnetic materials.
TEXT BOOKS:
1. Engineering Physics, B.K. Pandey, S. Chaturvedi – Cengage Learing.
2. Haliday and Resnick, Physics – wiley.
REFERENCES:
1. Richard Robinett, Quantum Mechanics.
2. J. Singh, Semiconductor Optoelectronics: Physics and Technology, Mc Graw-Hill inc. (1995).
3. Online Course: “Optoelectronic Materials and Devices” by Monica Katiyar and Deepak Gupta
on NPTEL.
4. Introduction to Solid State Physics by Charles kittel, wiley student edition.
5. S.M. Sze, Semiconductor Devices: Physics and Technology, wiley (2008).
PROGRAMMING FOR PROBLEM SOLVING

3 0 0 3
Course Objectives:
1. To learn the fundamentals of computers.
2. To understand the various steps in Program development.
3. To learn the syntax and semantics of C Programming Language.
4. To learn the usage of structured programming approach in solving problems.
Course Outcomes: After the end of this course student able to:
1. Write algorithms and to draw flowcharts for solving problems.
2. Translate the algorithms/flowcharts to programs (in C language).
3. Code and test a given logic in C programming language.
4. Formulate simple algorithms for arithmetic and logical problems.
5. Decompose a problem into functions and to develop modular reusable code.
6. Use arrays, pointers, strings and structures to formulate algorithms and programs.
7. Searching and sorting problems.
UNIT-I: INTRODUCTION TO COMPUTERS – Computer Systems, Computing

Environments, Computer Languages, Creating and running programs, Software Development
Method, Algorithms, Pseudo code, flow charts, applying the software development method.
INTRODUCTION TO C LANGUAGE – Background, Simple C programs, Identifiers, Basic
data types, Variables, Constants, Input / Output, Operators. Expressions, Precedence and
Associatively, Expression Evaluation, Type conversions, Bit wise operators, Statements, Simple
C Programming examples.
UNIT-II: STATEMENTS – if and switch statements, Repetition statements – while, for, do-
while statements, Loop examples, other statements related to looping – break, continue, go to,
Simple C Programming examples. DESIGNING STRUCTURED PROGRAMS- Functions,
basics, user defined functions, inter function communication, Scope, Storage classes-auto,
register, static, extern, scope rules, type qualifiers, recursion- recursive functions, Preprocessor
commands, example C programs
UNIT-III: ARRAYS AND STRINGS – Concepts, using arrays in C, inter function

communication, array applications, two – dimensional arrays, multidimensional arrays, C
program examples. Concepts, C Strings, String Input / Output functions, arrays of strings, string
manipulation functions, string / data conversion, C program examples.
UNIT-IV: POINTERS – Introduction (Basic Concepts), Pointers for inter function

communication, pointers to pointers, compatibility, memory allocation functions, array of
pointers, programming applications, pointers to void, pointers to functions, command –line
arguments. INPUT AND OUTPUT – Concept of a file, streams, standard input / output
functions, formatted input / output functions, text files and binary files, file input / output
operations, file status functions (error handling), C program examples.
UNIT-V: DERIVED TYPES – Structures – Declaration, definition and initialization of
structures, accessing structures, nested structures, arrays of structures, structures and functions,
pointers to structures, self referential structures, unions, typedef, bit fields, enumerated types, C
programming examples. SORTING AND SEARCHING – Selection sort, Bubble sort, Insertion
sort, Linear search and Binary search methods.
TEXT BOOKS:
1. C Programming & Data Structures, B.A.Forouzan and R.F. Gilberg, Third Edition, Cengage
Learning.
2. Problem Solving and Program Design in C, J.R. Hanly and E.B. Koffman, Fifth Edition,
Pearson Education.
3. The C Programming Language, B.W. Kernighan and Dennis M.Ritchie, PHI/Pearson
Education
REFERENCES:
1. C for Engineers and Scientists, H.Cheng, Mc.Graw-Hill International Edition
2. Data Structures using C – A. M.Tanenbaum, Y.Langsam, and M.J. Augenstein, Pearson
Education / PHI
3. C Programming & Data Structures, P. Dey, M Ghosh R Thereja, Oxford University Press
ENGINEERING GRAPHICS

1 0 4 3
Pre-requisites: Nil
Course objectives:
1. To provide basic concepts in engineering drawing.
2. To impart knowledge about standard principles of orthographic projection of objects.
3. To draw sectional views and pictorial views of solids.
Course Outcomes: At the end of the course, the student will be able to:
1. Preparing working drawings to communicate the ideas and information.
2. Read, understand and interpret engineering drawings.
UNIT-I: INTRODUCTION TO ENGINEERING DRAWING Principles of Engineering

Graphics and their Significance, Conic Sections including the Rectangular Hyperbola – General
method only. Cycloid, Epicycloid and Hypocycloid, Involute. Scales – Plain, Diagonal and
Vernier Scales.
UNIT-II: ORTHOGRAPHIC PROJECTIONS: Principles of Orthographic Projections –

Conventions – Projections of Points and Lines, Projections of Plane regular geometric figures.—
Auxiliary Planes.
UNIT-III: Projections of Regular Solids – Auxiliary Views.
UNIT-IV Sections or Sectional views of Right Regular Solids – Prism, Cylinder, Pyramid, Cone
– Auxiliary views – Sections of Sphere. Development of Surfaces of Right Regular Solids –
Prism, Cylinder, Pyramid and Cone
UNIT-V: ISOMETRIC PROJECTIONS : Principles of Isometric Projection – Isometric Scale

– Isometric Views – Conventions – Isometric Views of Lines, Plane Figures, Simple and
Compound Solids – Isometric Projection of objects having non- isometric lines. Isometric
Projection of Spherical Parts. Conversion of Isometric Views to Orthographic Views and Vice-
versa – Conventions Auto CAD: Basic principles only
TEXT BOOKS:
1. Engineering Drawing N.D. Bhatt / Charotar
2. Engineering Drawing and Graphics Rane and Shah/ Pearson Edu.
REFERENCES:
1. A Text Book of Engineering Drawing / Dhawan R K / S. Chand
2. Engineering Graphics With Auto CAD / James D Bethune / Pearson Edu.
3. Engineering Graphics / K R Mohan / Dhanpat Rai.
4. Text book on Engineering Drawing / KL Narayana/ P Kannaih/Scitech
APPLIED PHYSICS LAB
0 0 3 1.5
Course Objectives:
1. To provide an experimental foundation for the theoretical concepts introduced in the

lectures.
2. To teach how to make careful experimental observations and how to think about and
draw conclusions from such data.
3. To help students understand the role of direct observation in physics and to distinguish
between inferences based on theory and the outcomes of experiments.
Course Outcomes: At the end of the course students will be able:

1. Make careful experimental observations and draw conclusions from such data.
2. Distinguish between inferences based on theory and the outcomes of experiments.
3. Write a technical report which communicates scientific information in a clear and concise
manner.
LIST OF EXPERIMENTS:
1. Energy gap of P-N junction diode: To determine the energy gap of a semiconductor diode.
2. Solar Cell: To study the V-I Characteristics of solar cell.
3. Light emitting diode: Plot V-I and P-I characteristics of light emitting diode.
4. Stewart – Gee’s experiment: Determination of magnetic field along the axis of a current
carrying coil.
5. Hall Effect: To determine Hall co-efficient of a given semiconductor.
6. Photoelectric effect: To determine work function of a given material.
7. LASER: To study the characteristics of LASER sources.
8. Optical fiber: To determine the bending losses of Optical fibers.
9. LCR Circuit: To determine the Quality factor of LCR Circuit.
10. R-C Circuit: To determine the time constant of R-C circuit.
11. BJT: Characteristics of NPN transistor.
12. Zener diode: To study the V-I Characteristics of Zener diode.
Note: Any 8 experiments are to be performed by each student
PROGRAMMING FOR PROBLEM SOLVING LAB

0 0 3 1.5
Course Objectives:
1. To learn the fundamentals of computers.
2. To understand the various steps in Program development.
3. To learn the syntax and semantics of C Programming Language.
4. To learn the usage of structured programming approach in solving problems.
Course Outcomes: At the end of this course student will able to:
1. Write algorithms and to draw flowcharts for solving problems.
2. Translate the algorithms/flowcharts to programs (in C language).
3. Code and test a given logic in C programming language.
4. Formulate simple algorithms for arithmetic and logical problems.
5. Decompose a problem into functions and to develop modular reusable code.
6. Use arrays, pointers, strings and structures to formulate algorithms and programs.
7. Searching and sorting problems.
Week 1:
1. Write a C program to find the sum of individual digits of a positive integer.
2. Fibonacci sequence is defined as follows: the first and second terms in the sequence are 0 and
1. Subsequent terms are found by adding the preceding two terms in the sequence.
3. Write a C program to generate the first n terms of the sequence.
4. Write a C program to generate all the prime numbers between 1 and n, where n is a value
supplied by the user.
5. Write a C program to find the roots of a quadratic equation.
Week 2:
6. Write a C program to find the factorial of a given integer.
7. Write a C program to find the GCD (greatest common divisor) of two given integers.
8. Write a C program to solve Towers of Hanoi problem.
9. Write a C program, which takes two integer operands and one operator from the user,
performs the operation and then prints the result. (Consider the operators +,-,*, /, % and use
Switch Statement)
Week 3:
10. Write a C program to find both the largest and smallest number in a list of integers.
11. Write a C program that uses functions to perform the following:
i) Addition of Two Matrices
ii) Multiplication of Two Matrices
Week 4:
12. Write a C program that uses functions to perform the following operations:
i) To insert a sub-string in to a given main string from a given position.
ii) To delete n Characters from a given position in a given string.
13. Write a C program to determine if the given string is a palindrome or not
14. Write a C program that displays the position or index in the string S where the string T
begins, or – 1 if S doesn’t contain T.
15. Write a C program to count the lines, words and characters in a given text.
Week 5:
16. Write a C program to generate Pascal’s triangle.
17. Write a C program to construct a pyramid of numbers
18. Write a C program to read in two numbers, x and n, and then compute the sum of this
geometric progression: 1+x+x2+x3+………….+xn For example: if n is 3 and x is 5, then
the program computes 1+5+25+125. Print x, n, the sum Perform error checking.
For example, the formula does not make sense for negative exponents – if n is less than 0.
Have your program print an error message if n<0, then go back and read in the next pair of
numbers of without computing the sum. Are any values of x also illegal ? If so, test for
them too.
Week 6:
19. 2’s complement of a number is obtained by scanning it from right to left and complementing
all the bits after the first appearance of a 1. Thus 2’s complement of 11100 is 00100. Write a C
program to find the 2’s complement of a binary number.
20. Write a C program to convert a Roman numeral to its decimal equivalent.
Week 7:
21. Write a C program that uses functions to perform the following operations: i) Reading a
complex number ii) Writing a complex number iii) Addition of two complex numbers iv)
Multiplication of two complex numbers (Note: represent complex number using a structure.)
Week 8:
22. i) Write a C program which copies one file to another.
ii) Write a C program to reverse the first n characters in a file. (Note: The file name and n are
specified on the command line.)
23. i) Write a C program to display the contents of a file.
ii) Write a C program to merge two files into a third file (i.e., the contents of the first file
followed by those of the second are put in the third file)
Week 9:
24. Write a C program that implements the following sorting methods to sort a given list of
integers in ascending order i) Bubble sort ii) Selection sort iii) Insertion sort
Week 10:
25. Write C programs that use both recursive and non recursive functions to perform the
following searching operations for a Key value in a given list of integers: i) Linear search ii)
Binary search
TEXT BOOKS:
1. C Programming & Data Structures, B.A.Forouzan and R.F. Gilberg, Third Edition, Cengage
Learning.
2. Problem Solving and Program Design in C, J.R. Hanly and E.B. Koffman, Fifth Edition,
Pearson Education.
3. The C Programming Language, B.W. Kernighan and Dennis M.Ritchie, PHI/Pearson
Education
REFERENCES:
1. C for Engineers and Scientists, H.Cheng, Mc.Graw-Hill International Edition
2. Data Structures using C – A.M.Tanenbaum, Y.Langsam, and M.J. Augenstein, Pearson
Education / PHI
3. C Programming & Data Structures, P. Dey, M Ghosh R Thereja, Oxford University Press
ELECTRONIC DEVICES AND CIRCUITS
II Year B.Tech. ECE I Semester L T P C

3 1 0 4
Pre-Requisites: Physics
Course Objectives
1. To introduce components such as diodes, BJTs and FETs.

2. To know the applications of components.
3. To know the switching characteristics of components.
4. To give understanding of various types of amplifier circuits.
Course Outcomes
Upon completion of the Course, the students will be able to:

1. Analyze the characteristics of various semiconductor devices.
2. Apply diode characteristics to rectifiers, clippers and clampers.
3. Design biasing circuits for BJTs and FETs to act as amplifiers.
4. Design and analyze small signal amplifier circuits.
UNIT I
Diode and its Applications: Diode - Static and Dynamic resistances, Equivalent circuit, Load line
analysis, Diffusion and Transition Capacitances, Diode Applications: Switch-Switching times.
Rectifier - Half Wave Rectifier, Full Wave Rectifier, Bridge Rectifier, Rectifiers With Capacitive
Filter, Clippers-Clipping at two independent levels, Clampers-Clamping Operation, types,
Clamping Circuit Theorem, Comparators.
UNIT II
Bipolar Junction Transistor (BJT): Principle of Operation and characteristics - Common Emitter,
Common Base, Common Collector Configurations, Operating point, DC & AC load lines,
Transistor Hybrid parameter model, Determination of h-parameters from transistor characteristics,
Conversion of h-parameters.
UNIT III
Transistor Biasing and Stabilization : Bias Stability, Fixed Bias, Collector to Base bias, Self
Bias, Bias Compensation using Diodes and Transistors.
Analysis and Design of Small Signal Low Frequency BJT Amplifiers: Analysis of CE, CC, CB
Amplifiers and CE Amplifier with emitter resistance, low frequency response of BJT Amplifiers,
effect of coupling and bypass capacitors on CE Amplifier.
UNIT IV
Junction Field Effect Transistor: Construction, Principle of Operation, Pinch-Off Voltage, Volt-
Ampere Characteristic, Comparison of BJT and FET, Biasing of FET, FET as Voltage Variable
Resistor, MOSFET Construction and its Characteristics in Enhancement and Depletion modes.
UNIT V
FET Amplifiers: Small Signal Model, Analysis of CS, CD, CG JFET Amplifiers, Basic
concepts of MOSFET Amplifiers.
Special Purpose Devices: Zener Diode - Characteristics, Voltage Regulator; Principle of Operation
- SCR, Tunnel diode, UJT, Varactor Diode.
TEXTBOOKS
1. Electronic Devices and Circuits - Jacob Millman, McGraw Hill Education.

2. Electronic Devices and Circuits theory– Robert L. Boylestead, Louis Nashelsky, 11 th
Edition, Pearson, 2009.
REFERENCES
1. The Art of Electrionics , Horowitz, 3rdEdition Cambridge University Press, 2018

2. Electronic Devices and Circuits, David A. Bell – 5 th Edition, Oxford.
3. Pulse, Digital and Switching Waveforms –J. Millman, H. Taub and Mothiki S. Prakash
Rao, 2 Ed., McGraw Hill, 2008.
4. Electronic Devices and Circuits, S. Salivahanan, N.Suresh Kumar, A Vallvaraj, 2 nd
Edition, TMH.
NETWORK ANALYSIS AND TRANSMISSION LINES

3 0 0 3
Pre-Requisites: NIL
Course Objectives
1. To understand the basic concepts on RLC circuits.

2. To know the behaviour of the steady and transient states in RLC circuits.
3. To Design and analyze networks using two port network parameters.
4. To study the propagation, reflection and transmission of plane waves in bounded media.
Course Outcomes
Upon successful completion of the course, students will be able to:
1. Analyze the Steady and transient state behaviour of RLC Circuits.

2. Design and anlyze the application of two port network parameters.
3. Use transmission line parameters to establish distortion less conditions
4. Calculate transmission line parameters using Smith chart for stub matching
UNIT I
Network Topology, Basic cutset and tie set matrices for planar networks, Magnetic Circuits, Self
and Mutual inductances, dot convention, impedance, reactance concept, Impedance
transformation and coupled circuits, co-efficient of coupling, equivalent T for Magnetically
coupled circuits, Ideal Transformer.
UNIT II
Transient and Steady state analysis of RC, RL and RLC Circuits, Sinusoidal, Step and Square
responses. 2nd order series and parallel RLC Circuits, Root locus, damping factor, over damped,
under damped, critically damped cases, quality factor and bandwidth for series and parallel
resonance, resonance curves.
UNIT III
Two port Network parameters- Z, Y, ABCD, h and g parameters, Characteristic impedance,
Image transfer constant, image and iterative impedance, network function, driving point and
transfer functions – using transformed (S) variables, Poles and Zeros. Standard T,, L Sections,
Characteristic impedance, image transfer constants, Design of Attenuators, impedance matching
network.
UNIT IV
Transmission Lines - I: Types, Parameters, Transmission Line Equations, Primary & Secondary
Constants, Equivalent Circuit, Characteristic Impedance, Propagation Constant, Phase and Group
Velocities, Infinite Line Concepts, Lossless / Low Loss Characterization, Types of Distortion,
Condition for Distortion less line, Minimum Attenuation, Loading - Types of Loading.
UNIT V
Transmission Lines – II: Input Impedance Relations, SC and OC Lines, Reflection Coefficient,
VSWR. λ/4, λ/2, λ/8 Lines – Impedance Transformations, Smith Chart – Configuration and
Applications, Single Stub Matching.
TEXT BOOKS
1. Network Analysis – M. E. Van Valkenburg, 3rd Ed., Pearson, 2016

2. Networks, Lines and Fields – John D Ryder, PHI, 2nd Edition, 1999.
REFERENCES
1. Electric Circuits – J. Edminister and M.Nahvi – Schaum’s Outline series, MCGRAW

HILL EDUCATION, 1999.
2. Engineering Circuit Analysis – William Hayt and Jack E Kemmerly, MGH, 8th Edition,
1993.
3. Electromagnetics with Applications – JD. Kraus, 5th Ed., TMH
4. Transmission Lines – Richard Collier, Cambridge University Press, 2013.
SIGNALS AND SYSTEMS

3 1 0 4
Pre-Requisites: Mathematics
Course Objectives
This subject gives the knowledge of Signals and Systems required for all Electrical Engineering
related courses.
1. Classify signals and systems and their analysis in time and frequency domains.
2. Study the concepts of distortion less transmission through LTI systems, convolution and
correlation properties.
3. Identify the need for sampling of CT signals, types and merits and demerits of each type.
4. Understand Laplace and Z-transforms their properties for analysis of signals and systems.
Course Outcomes
Upon completing this course, the student will be able to:

1. Distinguish different signals, systems and their time and frequency domain analysis.
2. Identify the conditions for transmission of signals through systems and physical
realization of systems.
3. Identify the significance of sampling types and applications of correlation functions.
4. Discover the significance of LT, ZT and their relation
UNIT I
Signal Analysis
Analogy between Vectors and Signals, Orthogonal Signal Space, Signal approximation using
Orthogonal functions, Mean Square Error, Closed or complete set of Orthogonal functions,
Orthogonality in Complex functions, Classification of Signals and systems, Exponential and
Sinusoidal signals, Concepts of Impulse function, Unit Step function, Signum function.
UNIT II
Fourier series
Representation of Fourier series, Continuous time periodic signals, Properties of Fourier Series,
Dirichlet’s conditions, Trigonometric Fourier Series and Exponential Fourier Series, Complex
Fourier spectrum.
Fourier Transforms
Deriving Fourier Transform from Fourier series. Fourier Transform of arbitrary signal, Fourier
Transform of standard signals, Fourier Transform of Periodic Signals, Properties of Fourier
Transform, Fourier Transforms involving Impulse function and Signum function. Introduction to
Hilbert Transform.
UNIT III
Signal Transmission through Linear Systems
Linear System, Impulse response, Response of a Linear System, Linear Time Invariant(LTI)
System, Linear Time Variant (LTV) System, Transfer function of a LTI System, Filter
characteristic of Linear System, Distortion less transmission through a system, Signal bandwidth,
System Bandwidth, Ideal LPF, HPF, and BPF characteristics, Causality and Paley-Wiener
criterion for physical realization, Relationship between Bandwidth and rise time, Convolution
and Correlation of Signals, Concept of convolution in Time domain and Frequency domain,
Graphical representation of Convolution.
UNIT IV
Sampling theorem
Graphical and analytical proof for Band Limited Signals, Impulse Sampling, Natural and Flat top
Sampling, Reconstruction of signal from its samples, Effect of under sampling – Aliasing,
Introduction to Band Pass Sampling.
Correlation
Cross Correlation and Auto Correlation of Functions, Properties of Correlation Functions,
Energy Density Spectrum, Parsevals Theorem, Power Density Spectrum, Relation between
Autocorrelation Function and Energy/Power Spectral Density Function, Relation between
Convolution and Correlation, Detection of Periodic Signals in the presence of Noise by
Correlation, Extraction of Signal from Noise by Filtering.
UNIT V
Laplace Transforms
Laplace Transforms (L.T), Inverse Laplace Transform, Concept of Region of Convergence
(ROC) for Laplace Transforms, Properties of L.T, Relation between L.T and F.T of a signal,
Laplace Transform of certain signals using waveform synthesis.
Z–Transforms
Concept of Z- Transform of a Discrete Sequence, Distinction between Laplace, Fourier and Z
Transforms, Region of Convergence in Z-Transform, Constraints on ROC for various classes of
signals, Inverse Z-transform, Properties of Z-transforms.
TEXT BOOKS
1. Signals, Systems & Communications - B.P. Lathi, BSP, 2013.
2. Signals and Systems - A.V. Oppenheim, A.S. Willsky and S.H. Nawabi, 2 Ed.
REFERENCES
1. Signals and Systems – Simon Haykin and Van Veen , Wiley 2 Ed.,
2. Signals and Systems – A. Rama Krishna Rao, 2008, TMH
3. Fundamentals of Signals and Systems - Michel J. Robert, 2008, MGH International
Edition.
4. Signals, Systems and Transforms - C. L. Philips, J.M.Parr and Eve A.Riskin, 3 Ed., 2004,
PE.
5. Signals and Systems – K. Deergha Rao, Birkhauser, 2018.
SWITCHING THEORY AND LOGIC DESIGN

3 1 0 4
Pre-Requisites: Engineering Mathematics
Course Objectives
1. To understand common forms of number representation in logic circuits.

2. To learn basic techniques for the design of digital circuits and fundamental concepts used
in the design of digital systems.
3. To understand the concepts of combinational logic circuits and sequential circuits.
4. To understand the Realization of Logic Gates Using Diodes & Transistors.
Course Outcomes
Upon completing this course, the student will be able to

1. Use the numerical data in different forms and Boolean algebra theorems.
2. Use postulates of Boolean algebra and minimize combinational logic functions.
3. Design and analyze combinational and sequential circuits.
4. Identify the logic families in logic gates and use in realization of logic circuits.
UNIT I
Number Systems
Number systems, Complements of Numbers, Codes- Weighted and Non-weighted codes and its
Properties, Parity check code and Hamming code.
Boolean Algebra
Basic Theorems and Properties, Switching Functions- Canonical and Standard Form, Algebraic
Simplification, Digital Logic Gates, EX-OR gates, Universal Gates, Multilevel NAND/NOR
realizations.
UNIT II
Minimization of Boolean functions
Karnaugh Map Method - Up to five Variables, Don’t Care Map Entries, Tabular Method,
Combinational Logic Circuits
Adders, Subtractors, comparators, Multiplexers, Demultiplexers, Encoders, Decoders and Code
converters, Hazards and Hazard Free Relations.
UNIT III
Sequential Circuits Fundamentals
Basic Architectural Distinctions between Combinational and Sequential circuits, SR Latch, Flip
Flops: SR, JK, JK Master Slave, D and T Type Flip Flops, Excitation Table of all Flip Flops,
Timing and Triggering Consideration, Conversion from one type of Flip-Flop to another.
Registers and Counters
Shift Registers – Left, Right and Bidirectional Shift Registers, Applications of Shift Registers -
Design and Operation of Ring and Twisted Ring Counter, Operation of Asynchronous and
Synchronous Counters.
UNIT IV
Sequential Machines
Finite State Machines, Synthesis of Synchronous Sequential Circuits- Serial Binary Adder,
Sequence Detector, Parity-bit Generator, Synchronous Modulo N – Counters, Finite state
machine-capabilities and limitations, Mealy and Moore models.
UNIT V
Realization of Logic Gates Using Diodes & Transistors
AND, OR and NOT Gates using Diodes and Transistors, DCTL, RTL, DTL, TTL and CML
Logic Families and its Comparison, Classification of Integrated Circuits.
TEXT BOOKS
1. Switching and Finite Automata Theory - Zvi Kohavi & Niraj K. Jha, 3rdEdition,
Cambridge, 2010.
2. Modern Digital Electronics – R. P. Jain, 3rd edition, Tata McGraw-Hill, 2007.
REFERENCE
1. Digital Design- Morris Mano, PHI, 4th Edition,2006
2. Introduction to Switching Theory and Logic Design – Fredriac J. Hill, Gerald R.
Peterson, 3rd Ed,John Wiley & Sons Inc.
3. Fundamentals of Logic Design- Charles H. Roth, Cengage Learning, 5th, Edition, 2004.
4. Switching Theory and Logic Design – A Anand Kumar, PHI,2013
PROBABILITY THEORY AND STOCHASTIC PROCESSES

3 0 0 3
Pre-requisite: Mathematics
Course Objectives
1. This gives basic understanding of random signals and processing.

2. Utilization of Random signals and systems in Communications and Signal Processing
areas.
3. To known the Spectral and temporal characteristics of Random Process.
4. To Learn the Basic concepts of Noise sources.
Course Outcomes

1. Estimate characteristics of Random variables.
2. Find the response of linear time Invariant system for a Random Processes.
3. Determine the Spectral and temporal characteristics of Random Process.
4. Noise estimation in Communication systems and build various source coding techniques.
UNIT I
Probability & Random variables: Probability introduced through Sets and Relative Frequency:
Experiments and Sample Spaces, Discrete and Continuous Sample Spaces, Events, Probability
Definitions and Axioms, Joint Probability, Conditional Probability, Total Probability, Bay’s
Theorem, Independent Events.
Random Variables- Definition, Conditions for a Function to be a Random Variable, Discrete,
Continuous and Mixed Random Variable, Distribution and Density functions, Properties,
Binomial, Poisson, Uniform, Gaussian, Exponential, Rayleigh, Methods of defining
Conditioning Event, Conditional Distribution, Conditional Density and their Properties.
UNIT II
Operations on single & multiple random variables – expectations : Expected Value of a
Random Variable, Function of a Random Variable, Moments about the Origin, Central
Moments, Variance and Skew, Chebychev’s Inequality, Characteristic Function, Moment
Generating Function, Transformations of a Random Variable - Monotonic and Non-monotonic
Transformations of Continuous and Discrete Random Variable, Vector Random Variables, Joint
Distribution Function and its Properties, Marginal Distribution Functions, Conditional
Distribution and Density – Point Conditioning, Conditional Distribution and Density – Interval
conditioning, Statistical Independence, Sum of Two and more Random Variables, Central Limit
Theorem, Equal and Unequal Distribution.
Expected Value of a Function of Random Variables- Joint Moments about the Origin, Joint
Central Moments, Joint Characteristic Functions, Jointly Gaussian Random Variables: Two
Random Variables case, N Random Variable case, Properties, Transformations of Multiple
Random Variables, Linear Transformations of Gaussian Random Variables.
UNIT III
Random processes – Temporal characteristics: The Random Process Concept, Classification
of Processes, Deterministic and Nondeterministic Processes, Distribution and Density Functions,
concept of Stationarity and Statistical Independence. First-Order Stationary Processes, Second-
Order and Wide-Sense Stationarity, (N-Order) and Strict-Sense Stationarity, Time Averages and
Ergodicity, Mean-Ergodic Processes, Correlation-Ergodic Processes, Autocorrelation Function
and Its Properties, Cross-Correlation Function and Its Properties, Covariance Functions,
Gaussian Random Processes, Poisson Random Process. Random Signal Response of Linear
Systems: System Response – Convolution, Mean and Mean-squared Value of System Response,
autocorrelation Function of Response, Cross-Correlation Functions of Input and Output.
UNIT IV
Random processes – Spectral characteristics: The Power Spectrum: Properties, Relationship
between Power Spectrum and Autocorrelation Function, The Cross-Power Density Spectrum,
Properties, Relationship between Cross-Power Spectrum and Cross-Correlation Function.
Spectral Characteristics of System Response: Power Density Spectrum of Response, Cross-
Power Density Spectrums of Input and Output.
UNIT V
Noise sources & Information theory: Resistive/Thermal Noise Source, Arbitrary Noise
Sources, Effective Noise Temperature, Noise equivalent bandwidth, Average Noise Figures,
Average Noise Figure of cascaded networks, Narrow Band noise, Quadrature representation of
narrow band noise & its properties. Entropy, Information rate, Source coding: Huffman
coding, Shannon-Fano coding, Mutual information, Channel capacity of discrete channel,
Shannon-Hartley law; Trade -off between bandwidth and SNR.
TEXT BOOKS
1. Probability, Random Variables & Random Signal Principles - Peyton Z. Peebles, TMH, 4 th
Edition, 2001.
2. Principles of Communication systems by Taub and Schilling (TMH),2008
REFERENCES
1. Random Processes for Engineers-Bruce Hajck, Cambridge unipress,2015
2. Probability, Random Variables and Stochastic Processes – Athanasios Papoulis and S.
Unnikrishna Pillai, PHI, 4th Edition, 2002.
3. Probability, Statistics & Random Processes-K .Murugesan, P. Guruswamy, Anuradha
Agencies, 3rd Edition, 2003.
4. Signals, Systems & Communications - B.P. Lathi, B.S. Publications, 2003.
5. Statistical Theory of Communication – S.P Eugene Xavier, New Age Publications, 2003
ELECTRONIC DEVICES AND CIRCUITS LABORATORY

0 0 2 1
List of Experiments (Minimum of Ten experiments to be done):

Design and Simulate using Multisim or Pspice or Equivalent Simulation Software: Conduct
experiment Using Discrete components/ kits
1. PN Junction diode characteristics A) Forward bias B) Reverse bias.

2. Zener diode characteristics and Zener as voltage Regulator
3. Full Wave Rectifier with & without filters
4. Measurement of h-parameters of transistor in CB, CE, CC configurations
5. Input and Output characteristics of FET in CD configuration
6. SCR Characteristics.
7. Common Emitter Amplifier Characteristics
8. Common Base Amplifier Characteristics
9. Common Source Amplifier Characteristics
10. Types of Clippers and at different reference voltage
11. Types of Clampers and at different reference voltage
12. The steady state output waveform of clampers for a square wave input
13. Comparison: Operation of different types of Comparators
DIGITAL LOGIC DESIGN LABORATORY

0 0 2 1
Note:
 Minimum of 12 experiment are to be designed and realized using digital
ICs/Components.
List of Experiments
1. Realization of Boolean Expressions using Gates

2. Design and realization logic gates using universal gates
3. generation of clock using NAND / NOR gates
4. Design a 4 – bit Adder / Subtractor
5. Design and realization of Asynchronous counters using flip-flops
6. Design and realization of 8x1 using 2x1 multiplexer, design any digital circuit using
MUX.
7. Verification of truth tables and excitation tables of SR,JK,T and D Flip Flops.
8. Design and realization a 4 – bit gray to Binary and Binary to Gray Converter
9. Design and realization of a 4 bit pseudo random sequence generator using logic gates.
10. Design and realization of an 8 bit parallel load and serial out shift register using flip-
flops.
11. Design and realization a Synchronous counters using flip-flops
12. Design and realization 2 bit comparator
13. Realization of logic gates using DTL, TTL, ECL, etc.,
14. Design of a finite state machine as a sequence detector.
BASIC SIMULATION LABORATORY

0 0 2 1
Note:
 All the experiments are to be simulated using MATLAB or equivalent software
 MATLAB or Equivalent Live Scripts are to be incorporated in conducting all
simulations
 Minimum of 12 experiment are to be completed/Simulated.
1. Generation of Various Signals and Sequences: Periodic and Aperiodic, Unit Impulse,
Unit Step, Square, Saw tooth, Triangular, Sinusoidal, Ramp, Sinc.
2. Operations on Signals and Sequences: Addition, Multiplication, Scaling, Shifting,
Folding, Computation of Energy and Average Power.
3. Finding the Even and Odd parts of Signal/Sequence and Real and Imaginary parts of
Signal.
4. Convolution of Signals and sequences.
5. Auto Correlation and Cross Correlation of Signals and Sequences.
6. Verification of Linearity and Time Invariance Properties of a given Continuous/Discrete
System.
7. Sinusoidal responses of the given LTI system and verifying its realiazability and stability
properties.
8. Gibbs Phenomenon verification.
9. Finding the Fourier Transform of a given signal and plotting its magnitude and phase
spectrum.
10. Waveform Synthesis using Laplace Transform.
11. To plot pole-zero diagram in S-plane / Z-plane of given signal/sequence.
12. Generation of Gaussian noise and find its mean, Skew, Kurtosis, PDF and PSD.
13. Verification of Sampling Theorem.
14. Removal of noise by Autocorrelation / Cross correlation.
15. Extraction of Periodic Signal masked by noise using Correlation.
16. App Designer for building UIs for Android/iOS sensor based step counter and location
identification using GPS.
ENVIRONMENTAL SCIENCE

2 0 0 0
Pre-requisite: NIL
Course Objectives
1. Creating the awareness about environmental problems among students.
2. Imparting basic knowledge about the environment and its allied problems.
3. Developing an attitude of concern for the environment.
4. Motivating students to participate in environment protection and environment
Improvement.
UNIT-I:
MULTIDISCIPLINARY NATURE OF ENVIRONMENTAL STUDIES:
Definition, Scope and Importance – Need for Public Awareness.
NATURAL RESOURCES: Renewable and non-renewable resources – Natural resources and
associated problems – Forest resources – Use and over – exploitation, deforestation, case studies
– Timber extraction – Mining, dams and other effects on forest and tribal people – Water
resources – Use and over utilization of surface and ground water – Floods, drought, conflicts
over water, dams – benefits and problems - Mineral resources: Use and exploitation,
environmental effects of extracting and using mineral resources, case studies.
UNIT–II:
ECOSYSTEMS: Concept of an ecosystem. - Structure and function of an ecosystem. -
Producers, consumers and decomposers. - Energy flow in the ecosystem - Ecological succession.
- Food chains, food webs and ecological pyramids. - Introduction, types, characteristic features,
structure and function of the following ecosystem:
a. Forest ecosystem
b. Grassland ecosystem
c. Desert ecosystem
d. Aquatic ecosystems (ponds, streams, lakes, rivers, oceans, estuaries)
UNIT–III:
ENVIRONMENTAL POLLUTION: Definition, Cause, effects and control measures of:
a. Air pollution
b. Water pollution
c. Soil pollution
d. Marine pollution
e. Noise pollution
f. Thermal pollution
g. Nuclear hazards
UNIT–IV:
SOLID WASTE MANAGEMENT: Causes, effects and control measures of urban and
industrial wastes. - Role of an individual in prevention of pollution - Pollution case studies -
Disaster management: floods, earthquake, cyclone and landslides.
UNIT–V:
SOCIAL ISSUES AND THE ENVIRONMENT: From Unsustainable to Sustainable
development - Urban problems related to energy -Water conservation, rain water harvesting,
watershed management - Resettlement and rehabilitation of people; its problems and concerns.
Case Studies -Environmental ethics: Issues and possible solutions. -Climate change, global
warming, acid rain, ozone layer depletion, nuclear accidents and holocaust. Case Studies -
Wasteland reclamation. –Consumerism and waste products. - Environment Protection Act. -Air
(Prevention and Control of Pollution) Act. -Water (Prevention and control of Pollution) Act -
Wildlife Protection Act -Forest Conservation Act -Issues involved in enforcement of
environmental legislation. -Public awareness.
TEXT BOOKS:
1.Textbook of Environmental Studies for Undergraduate Courses by Erach Bharucha for
University Grants Commission, Universities Press
2. Environmental Studies by R. Rajagopalan, Oxford University Press.
REFERENCE BOOKS:
1. Textbook of Environmental Sciences and Technology by M. Anji Reddy, BS Publication.
Course Outcomes:
At the end of the course, it is expected that students will be able to:
1. Identify and analyze environmental problems as well as the risks associated with these
problems
2. Understand what it is to be a steward in the environment
Studying how to live their lives in a more sustainable manner
MATHEMATICS- III
(NUMERICAL METHODS AND COMPLEX VARIABLES)
II Year B.Tech. ECE II Semester L T P C

3 1 0 4
Pre-requisites: Mathematics courses of first year of study.
Objectives: To learn
 Concept, properties of Laplace transforms
 Solving ordinary differential equations using Laplace transforms techniques.
 Various methods to the find roots of an equation.
 Concept of finite differences and to estimate the value for the given data using
interpolation.
 Evaluation of integrals using numerical techniques
 Solving ordinary differential equations using numerical techniques.
 Differentiation and integration of complex valued functions.
 Evaluation of integrals using Cauchy’s integral formula and Cauchy’s residue theorem.
 Expansion of complex functions using Taylor’s and Laurent’s series.
UNIT I
Laplace Transforms
Laplace Transforms; Laplace Transform of standard functions; first shifting theorem; Laplace
transforms of functions when they are multiplied and divided by‘t’. Laplace transforms of
derivatives and integrals of function; Evaluation of integrals by Laplace transforms; Laplace
transforms of Special functions; Laplace transform of periodic functions.
Inverse Laplace transform by different methods, convolution theorem (without Proof), solving
ODEs by Laplace Transform method.
UNIT II
Numerical Methods-I
Solution of polynomial and transcendental equations – Bisection method, Iteration Method,
Newton-Raphson method and Regula-Falsi method.
Finite differences- forward differences- backward differences-central differences-symbolic
relations and separation of symbols; Interpolation using Newton’s forward and backward
difference formulae. Central difference interpolation: Gauss’s forward and backward formulae;
Lagrange’s method of interpolation
UNIT III
Numerical Methods-II
Numerical integration: Trapezoidal rule and Simpson’s 1/3rd and 3/8 rules.
Ordinary differential equations: Taylor’s series; Picard’s method; Euler and modified Euler’s
methods; Runge-Kutta method of fourth order.
UNIT IV
Complex Variables (Differentiation)
Limit, Continuity and Differentiation of Complex functions. Cauchy-Riemann equations
(without proof), Milne- Thomson methods, analytic functions, harmonic functions, finding
harmonic conjugate; elementary analytic functions (exponential, trigonometric, logarithm) and
their properties.
UNIT V
Complex Variables (Integration)
Line integrals, Cauchy’s theorem, Cauchy’s Integral formula, Liouville’s theorem, Maximum-
Modulus theorem (All theorems without proof); zeros of analytic functions, singularities,
Taylor’s series, Laurent’s series; Residues, Cauchy Residue theorem (without proof)
Course outcomes:
After learning the contents of this paper the student must be able to
 Use the Laplace transforms techniques for solving ODE’s
 Find the root of a given equation.
 Estimate the value for the given data using interpolation
 Find the numerical solutions for a given ODE’s
 Analyse the complex function with reference to their analyticity, integration using
Cauchy’s integral and residue theorems
 Taylor’s and Laurent’s series expansions of complex function
TEXT BOOKS
1. B.S. Grewal, Higher Engineering Mathematics, Khanna Publishers, 36 th Edition,

2010.
2. S.S. Sastry, Introductory methods of numerical analysis, PHI, 4th Edition, 2005.
3. J. W. Brown and R. V. Churchill, Complex Variables and Applications, 7th Ed., Mc-
Graw Hill, 2004.
REFERENCES
1. M. K. Jain, SRK Iyengar, R.K. Jain, Numerical methods for Scientific and
Engineering Computations , New Age International publishers.
2. Erwin kreyszig, Advanced Engineering Mathematics, 9th Edition, John Wiley &
Sons,2006.
ELECTROMAGNETIC FIELDS AND WAVES

3 0 0 3
Pre-requisite: Mathematics
Course Objectives
1. To learn the Basic Laws, Concepts and proofs related to Electrostatic Fields and
Magnetostatic Fields, and apply them to solve physics and engineering problems.
2. To distinguish between static and time-varying fields, and understand the
significance and utility of Maxwell’s Equations and Boundary Conditions, and gain
ability to provide solutions to communication engineering problems.
3. To analyze the characteristics of Uniform Plane Waves (UPW), determine their
propagation parameters and estimate the same for dielectric and dissipative media.
4. To conceptually understand the waveguides and to determine the characteristics of
rectangular waveguides, microstrip lines .
Course Outcomes
1. Apply the knowledge of Basic Laws, Concepts and proofs related to Electrostatic
Fields and Magnetostatic Fields to solve engineering problems.
2. Distinguish between the static and time-varying fields, establish the corresponding
sets of Maxwell’s Equations and Boundary Conditions.
3. Analyze the Wave Equations for good conductors, good dielectrics and evaluate
the UPW Characteristics for several practical media of interest.
4. To analyze completely the rectangular waveguides, their mode characteristics, and
design waveguides for solving practical problems.
UNIT I
Electrostatics
Coulomb’s Law, Electric Field Intensity – Fields due to Different Charge Distributions, Electric
Flux Density, Gauss Law and Applications, Electric Potential, Relation between E and V,
Maxwell’s Equations for Electrostatic Fields, Energy Density, Convection and Conduction
Currents, Dielectric Constant, Isotropic and Homogeneous Dielectrics, Continuity Equation,
Relaxation Time, Poisson’s and Laplace’s Equations, Capacitors – Parallel Plate, Coaxial,
Spherical.
UNIT II
Magnetostatics
Biot-Savart’s Law, Ampere’s Circuit Law and Applications, Magnetic Flux Density, Maxwell’s
Equations for Magnetostatic Fields, Magnetic Scalar and Vector Potentials, Forces due to
Magnetic Fields, Ampere’s Force Law.
UNIT III
Maxwell’s Equations for Time Varying Fields
Faraday’s Law and Transformer EMF, Inconsistency of Ampere’s Law and Displacement
Current Density, Maxwell’s Equations in Different Forms, Conditions at a Boundary Surface -
Dielectric-Dielectric and Dielectric-Conductor Interfaces.
UNIT IV
EM Wave Characteristics
Wave Equations for Conducting and Perfect Dielectric Media, Uniform Plane Waves –
Definitions, Relation between E & H, Sinusoidal Variations, Wave Propagation in Lossless and
Conducting Media, Characterization of Conductors & Dielectrics , Wave Propagation in Good
Conductors and Good Dielectrics, Polarization.
Reflection and Refraction of Plane Waves – Normal and Oblique Incidences for both Perfect
Conductor and Perfect Dielectrics, Brewster Angle, Critical Angle and Total Internal Reflection,
Surface Impedance, Poynting Vector and Poynting Theorem.
UNIT V
Waveguides
Rectangular Waveguides – Solution of Wave Equations in Rectangular Coordinates, TE/TM
mode analysis, Expressions for Fields, Characteristic Equation and Cut-off Frequencies,
Dominant and Degenerate Modes, Sketches of TE and TM mode fields in the cross-section,
Phase and Group Velocities, Wavelengths and Impedance Relations, Equation of Power
Transmission, Impossibility of TEM Mode. Microstrip Lines – Zo Relations, Effective Dielectric
Constant.
TEXT BOOKS
1. Engineering Electromagnetics – William H. Hayt Jr. and John A. Buck, 8 th Ed.,

McGrawHill,2014
2. Principles of Electromagnetics – Matthew N.O. sadiku and S.V. Kulkarni, 6 th Ed., Oxford
University Press, Aisan Edition, 2015.
REFERENCES
1. Electromagnetic Waves and Radiating Systems – E.C. Jordan and K.G. Balmain, 2 ndEd.,
PHI, 2000.
2. Engineering Electromagnetics – Nathan Ida, 2ndEd., Springer (India) Pvt. Ltd., New Delhi,
2005.
3. Electromagnetic Field Theory Fundamentals – Bhag Singh Guru and Huseyin R. Hiziroglu,
Cambridge University Press, 2nd Ed., 2006.
ANALOG AND DIGITAL COMMUNICATIONS

3 1 0 4
Pre-requisite: Signals and Systems
Course Objectives
1. To develop ability to analyze system requirements of analog and digital communication
systems.
2. To understand the generation, detection of various analog and digital modulation
techniques.
3. To acquire theoretical knowledge of each block in AM, FM transmitters and receivers.
4. To understand the concepts of baseband transmissions.
Course Outcomes
1. Analyze baseband and bandpass analog and digital modulation techniques.
2. Estimate the effect of noise present in analog and digital communication systems and in
channel.
3. Design AM, FM Transmitters and Receivers.
UNIT I
Amplitude Modulation
Need for modulation, Amplitude Modulation - Time and frequency domain representation,
single tone modulation, power relations in AM waves, Generation of AM waves - Switching
modulator, Detection of AM Waves - Envelope detector, DSB-SC modulation - time and
frequency domain representation, Generation of DSB-SC Waves - Balanced Modulators,
Coherent detection of DSB-SC Waves, COSTAS Loop, SSB modulation - time and frequency
domain representation, Generation of SSB waves - Frequency discrimination and Phase
discrimination methods, Demodulation of SSB Waves, Vestigial side band modulation – Time
and frequency domain representation. Noise in AM, DSB and SSB Systems.
UNIT II
Angle Modulation
Basic concepts of Phase Modulation, Frequency Modulation: Single tone frequency modulation,
Spectrum Analysis of Sinusoidal FM Wave using Bessel functions, Narrow band FM, Wide band
FM, Power in NBFM and WBFM, Transmission bandwidth of FM Wave. Generation of FM
Waves - Armstrong Method, Detection of FM Waves - Balanced slope detector, Phase locked
loop, Comparison of FM and AM. Noise in Angle Modulation System, Threshold effect in
Angle Modulation System. Pre-emphasis and De-emphasis.
UNIT III
Transmitters
Classification of Transmitters, AM Transmitters, FM Transmitters – Variable reactance, Phase
Modulator and FM.
Receivers
Radio Receiver - Receiver Types - Tuned radio frequency receiver, Super heterodyne receiver,
RF section and Characteristics - Frequency changing and tracking, Intermediate frequency,
Image frequency, AGC, Amplitude limiting, FM Receiver, Comparison with AM Receiver.
UNIT IV
Pulse Modulation
Types of Pulse modulation - PAM, PWM and PPM. Comparison of FDM and TDM.
Pulse Code Modulation
PCM Generation and Reconstruction, Quantization Noise Power, Non Uniform Quantization and
Companding, DPCM, Adaptive DPCM, DM and Adaptive DM, Noise in DM.
UNIT V
Digital Modulation Techniques
ASK- Modulator, Coherent ASK Detector, FSK- Modulator, Non Coherent FSK Detector,
BPSK- Modulator, Coherent BPSK Detection. Differential PSK, Principles of QPSK and QAM.
Baseband Transmission and Optimal Reception of Digital Signal: A Baseband Signal
Receiver, Probability of Error, Optimum Receiver, Matched filter, Coherent Reception, ISI, Eye
Diagrams, Cross Talk.
TEXTBOOKS
1. Analog and Digital Communications – Simon Haykin, John Wiley, 2005.
2. Electronics Communication Systems-Fundamentals through Advanced-Wayne Tomasi,
5th Edition, PHI, 2009.
REFERENCES
1. Principles of Communication Systems - Herbert Taub, Donald L Schiling, Goutam Saha,
3rd Edition, Mcgraw-Hill, 2008.
2. Electronic Communications – Dennis Roddy and John Coolean , 4 th Edition , PEA, 2004
3. Electronics & Communication System – George Kennedy and Bernard Davis , TMH,
2004
4. Analog and Digital Communication – K. Sam Shanmugam, Willey ,2005
LINEAR AND DIGITAL INTEGRATED CIRCUITS

3 0 0 3
Pre-requisite: Switching Theory and Logic Design.
Course Objectives
The main objectives of the course are:
1. To introduce the basic building blocks of linear integrated circuits.
2. To introduce the theory and applications of analog multipliers and PLL.
3. To introduce the concepts of waveform generation and introduce some special function ICs.
4. To understand and implement the working of basic digital circuits.
Course Outcomes
1. Design linear integrated circuits using operational amplifiers.

2. Design various applications using IC 555 and IC 565.
3. Convert different frequency signals from Analog to Digital form and vice-versa.
4. Implement various digital circuits using Sequential and combinational logic ICs.
UNIT I
Operational Amplifier
Ideal and Practical Op-Amp, Op-Amp Characteristics, DC and AC Characteristics, Features of
741 Op-Amp, Modes of Operation - Inverting, Non-Inverting, Differential, Instrumentation
Amplifier, AC Amplifier, Differentiators and Integrators, Comparators, Schmitt Trigger,
Introduction to Voltage Regulators, Features of 723 Regulator, Three Terminal Voltage
Regulators.
UNIT II
Op-Amp, IC-555 & IC 565 Applications
Introduction to Active Filters, Characteristics of Band pass, Band reject and All Pass Filters,
Analysis of 1st order LPF & HPF Butterworth Filters, Waveform Generators – Triangular,
Sawtooth, Square Wave, IC555 Timer - Functional Diagram, Monostable and Astable
Operations, Applications, IC565 PLL - Block Schematic, principle and Applications.
UNIT III
Data Converters
Introduction, Basic DAC techniques, Different types of DACs-Weighted resistor DAC, R-2R
ladder DAC, Inverted R-2R DAC, Different Types of ADCs - Parallel Comparator Type ADC,
Counter Type ADC, Successive Approximation ADC and Dual Slope ADC, DAC and ADC
Specifications.
UNIT IV
Combinational Logic ICs
Specifications and Applications of TTL-74XX & CMOS 40XX Series ICs - Code Converters,
Decoders, LED & LCD Decoders with Drivers, Encoders, Priority Encoders, Multiplexers,
Demultiplexers, Priority Generators/Checkers, Parallel Binary Adder/Subtractor, Magnitude
Comparators.
UNIT V
Sequential Logic IC’s and Memories
Familiarity with commonly available 74XX & CMOS 40XX Series ICs – All Types of Flip-
flops, Synchronous Counters, Decade Counters, Shift Registers.
Memories - ROM Architecture, Types of ROMS & Applications, RAM Architecture, Static &
Dynamic RAMs.
TEXT BOOKS
1. Op-Amps & Linear ICs – Ramakanth A. Gayakwad, PHI, 2003.

2. Digital Fundamentals – Floyd and Jain, Pearson Education, 8 th Ed., 2005.
REFERENCES
1. Linear Integrated Circuits –D. Roy Chowdhury, New Age International (p) Ltd, 2 nd Ed.,
2003.
2. Digital Design Principles and Practices – John. F. Wakerly, Pearson 3 rd Ed., 2009.
3. Linear Integrated Circuits and Applications – Salivahana, TMH, 2008.
4. Operational Amplifiers with Linear Integrated Circuits, 4 th Ed., William D.Stanley, Pearson
Education India, 2009.
ANALOG AND PULSE CIRCUITS

3 1 0 4
Pre-requisite: Electronic Devices and Circuits
Course Objectives
The main objectives of the course are:
1. To learn the concepts of high frequency behaviour of transistors.
2. To understand various types of amplifier circuits such as small signal, cascaded, large
signal and tuned amplifiers.
3. To get familiarize with the Concept of feedback in amplifiers so as to differentiate
between negative and positive feedback.
4. To learn multivibrators using transistors and sweep circuits.
Course Outcomes
1. Design multistage amplifiers and understand the concepts of High Frequency Analysis of
Transistors.
2. To differentiate between positive and negative feedback amplifiers and design stable
amplifiers and oscillators.
3. Design and realize different classes of Power Amplifiers and tuned amplifiers useable for
audio and Radio applications.
4. Design multivibrators and sweep circuits for various applications.
UNIT I
Multistage Amplifiers
Classification of Amplifiers, Distortion in amplifiers, Different coupling schemes used in
amplifiers, Frequency response and Analysis of multistage amplifiers, Cascode amplifier,
Darlington pair.
Transistor at High Frequency
Hybrid - model of Common Emitter transistor model, fα , fβ and unity gain bandwidth, Gain-
bandwidth product.
UNIT II
Feedback Amplifiers
Concepts of feedback – Classification of feedback amplifiers – General characteristics of
Negative feedback amplifiers – Effect of Feedback on Amplifier characteristics – Voltage series,
Voltage shunt, Current series and Current shunt Feedback configurations.
UNIT III
Oscillators
Condition for Oscillations, RC type Oscillators-RC phase shift and Wien-bridge Oscillators, LC
type Oscillators –Generalized analysis of LC Oscillators, Hartley and Colpitts Oscillators,
Frequency and amplitude stability of Oscillators, Crystal Oscillator.
UNIT IV
Large Signal Amplifiers
Class-A Power Amplifier- Series fed and Transformer coupled, Conversion Efficiency, Class B
Power Amplifier- Push Pull and Complimentary Symmetry configurations, Conversion
Efficiency, Principle of operation of Class AB and Class C Amplifiers.
Tuned Amplifiers
Single Tuned Amplifiers – Q-factor, frequency response of tuned amplifiers, Concept of stagger
tuning and synchronous tuning.
UNIT V
Multivibrators
Types of Triggering, Analysis and Design of Bistable, Monostable, Astable Multivibrators and
Schmitt trigger using Transistors.
Time Base Generators
General features of a Time base Signal, Methods of Generating Time Base Waveform, concepts
of Transistor Miller and Bootstrap Time Base Generator, Methods of Linearity improvement.
TEXT BOOKS
1. Integrated Electronics, Jacob Millman, Christos C Halkias, McGraw Hill Education, 2 nd

Ed., 2010
2. Electronic Devices Conventional and current version -Thomas L. Floyd, Pearson, 2015.
REFERENCES
1. Electronic Devices and Circuits, David A. Bell – 5 th Ed., Oxford, 1986.

2. Electronic Devices and Circuits theory– Robert L. Boylestead, Louis Nashelsky, 11 th Ed.,
Pearson, 2009.
3. Millman’s Pulse, Digital and Switching Waveforms –J. Millman, H. Taub and Mothiki
S. Prakash Rao, 2 Ed., TMH, 2008.
4. Pulse, Switching and Digital Circuits –David A. Bell, 5 th Ed, Oxford, 2015.
ANALOG AND DIGITAL COMMUNICATIONS LABORATORY

0 0 2 1
Note:
 Minimum 12 experiments should be conducted.
 All these experiments are to be simulated first either using MATLAB, Commsim or any
other simulation package and then to be realized in hardware
1. (i) Amplitude modulation and demodulation (ii) spectrum analysis of AM

2. (i) Frequency modulation and demodulation (ii) spectrum analysis of FM
3. DSB-SC Modulator & Detector
4. SSB-SC Modulator & Detector (Phase Shift Method)
5. Frequency Division Multiplexing & De multiplexing
6. Pulse Amplitude Modulation & Demodulation
7. Pulse Width Modulation & Demodulation
8. Pulse Position Modulation & Demodulation
9. PCM Generation and Detection
10. Delta Modulation and Demodulation
11. Frequency Shift Keying: Generation and Detection
12. Binary Phase Shift Keying: Generation and Detection
13. Generation and Detection (i) DPSK (ii) QPSK
14. Sampling Theorem and Amplitude Modulation using App Designer
LINEAR AND DIGITAL INTEGRATED CIRCUITS LABORATORY

0 0 2 1
Note:
 Minimum 12 experiments should be conducted.
 Verify the functionality of the IC in the given application.
Design and Implementation of:
1. Inverting and Non-inverting Amplifiers using Op Amps.

2. Adder and Subtractor using Op Amp.
3. Comparators using Op Amp.
4. Integrator Circuit using IC 741.
5. Differentiator circuit using Op Amp.
6. Active Filter Applications – LPF, HPF (first order)
7. IC 741 Waveform Generators – Sine, Square wave and Triangular waves.
8. Mono-stable Multivibrator using IC 555.
9. Astable Multivibrator using IC 555.
10. Schmitt Trigger Circuits – using IC 741.
11. IC 565 – PLL Applications.
12. Voltage Regulator using IC 723.
13. Three Terminal Voltage Regulators –7805, 7809, 7912.
ANALOG AND PULSE CIRCUITS LABORATORY

0 0 2 1
 Minimum 12 experiments should be conducted:
1. Current Shunt Feedback amplifier

2. Voltage Series Feedback amplifier
3. Cascode amplifier
4. Darlington Pair
5. RC Phase shift Oscillator
6. Hartley and Colpitt’s Oscillators
7. Class A power amplifier
8. Class B Complementary symmetry amplifier
9. Two Stage RC Coupled Amplifier
10. Wien Bridge Oscillator using Transistors
11. Design a Bistable Multivibrator and draw its waveforms
12. Design an Astable Multivibrator and draw its waveforms
13. Design a Monostable Multivibrator and draw its waveforms
14. Response of Schmitt Trigger circuit for loop gain less than and greater than one
15. The output- voltage waveform of Boot strap sweep circuit
16. The output- voltage waveform of Miller sweep circuit
17. Pulse Synchronization of An Astable circuit
18. Response of a transistor Current sweep circuit
INDIAN CONSTITUTION

2 0 0 0
Course Objectives:
Students will be able to:
1. Understand the premises informing the twin themes of liberty and freedom from a civil
rights perspective.
2. To address the growth of Indian opinion regarding modern Indian intellectuals’
Constitutional role and entitlement to civil and economic rights as well as the
emergence of nationhood in the early years of Indian nationalism.
3. To address the role of socialism in India after the commencement of the Bolshevik
Revolution in 1917 and its impact on the initial drafting of the Indian Constitution.
UNIT 1:
History of Making of the Indian Constitution: History Drafting Committee, (Composition &
Working)
UNIT 2:
Philosophy of the Indian Constitution: Preamble, Salient Features
UNIT 3:
Contours of Constitutional Rights & Duties:
Fundamental Rights, Right to Equality, Right to Freedom, Right against Exploitation, Right to
Freedom of Religion, Cultural and Educational Rights, Right to Constitutional Remedies,
Directive Principles of State Policy, Fundamental Duties.
UNIT 4:
Organs of Governance:
Parliament, Composition, Qualifications and Disqualifications, Powers and Functions,
Executive, President, Governor, Council of Ministers, Judiciary, Appointment and Transfer of
Judges, Qualifications, Powers and Functions
UNIT 5:
Local Administration:
District’s Administration head: Role and Importance, Municipalities: Introduction, Mayor and
role of Elected Representative, CEO of Municipal Corporation. Panchayat raj: Introduction,
PRI: Zilla Panchayat. Elected officials and their roles. CEO of Zilla Panchayat: Position and
role. Block level: Organizational Hierarchy (Different departments), Village level: Role of
Elected and Appointed officials, Importance of grass root democracy
UNIT 6:
Election Commission:
Election Commission: Role and Functioning. Chief Election Commissioner and Election
Commissioners. State Election Commission: Role and Functioning. Institute and Bodies for the
welfare of SC/ST/OBC and women.
Suggested reading
1. The Constitution of India, 1950 (Bare Act), Government Publication.
2. Dr. S. N. Busi, Dr. B. R. Ambedkar framing of Indian Constitution, 1st Edition, 2015.
3. M. P. Jain, Indian Constitution Law, 7th Edn., Lexis Nexis, 2014.
4. D.D. Basu, Introduction to the Constitution of India, Lexis Nexis, 2015.
Course Outcomes:
Students will be able to:
1. Discuss the growth of the demand for civil rights in India for the bulk of Indians before the
arrival of Gandhi in Indian politics.
2. Discuss the intellectual origins of the framework of argument that informed the
conceptualization of social reforms leading to revolution in India.
3. Discuss the circumstances surrounding the foundation of the Congress Socialist Party [CSP]
under the leadership of Jawaharlal Nehru and the eventual failure of the proposal of direct
elections through adult suffrage in the Indian Constitution.
4. Discuss the passage of the Hindu Code Bill of 1956.
BUSINESS ECONOMICS AND FINANCIAL ANALYSIS
III Year B.Tech. ECE I Semester L T P C

3 0 0 3
Course Objective:
To prepare engineering students to analyze cost/ revenue/ financial data and to make economic
and financial analysis in decision making process and to examine the performance of companies
engaged in engineering.
Course Outcome:
To perform and evaluate present and future worth of the alternate projects and to appraise
projects by using traditional and DCF Methods. To carry out cost benefit analysis of projects and
to calculate BEP of different alternative projects.
Unit- I: Introduction to Engineering Economics- Basic Principles and Methodology of

Engineering Economics– Fundamental Concepts - Demand – Demand Determinants - Law of
Demand- Demand Forecasting and Methods - Elasticity of Demand - Theory of Firm – Supply-
Elasticity of Supply.
Unit- II: Macro Economic Concepts: National Income Accounting - Methods of Estimation-
Various Concepts of National Income - Inflation – Definition – Causes of Inflation and
Measures to Control Inflation - New Economic Policy 1991 (Industrial policy, Trade policy, and
Fiscal policy) Impact on Industry.
UNIT- III: Production, Cost, Market Structures & Pricing:

Production Analysis: Factors of Production, Production Function, Production Function with one
variable input, two variable inputs, Returns to Scale, Different Types of Production Functions.
Cost analysis: Types of Costs, Short run and Long run Cost Functions. Market Structures: Nature
of Competition, Features of Perfect competition, Monopoly, Oligopoly, and Monopolistic
Competition. Pricing: Types of Pricing, Product Life Cycle based Pricing, Break Even Analysis,
Cost Volume Profit Analysis.
Unit- IV: Capital Budgeting Techniques: Significance of Capital Budgeting - cash flows-
Time Value of Money- Choosing between alternative investment proposals- Methods of
Appraisal Techniques- Pay Back Period - Average Rate of Return – Net Present Value- Internal
Rate of Return – Profitability Index.
Unit- V: Introduction to Accounting: Accounting Principles (GAPP), concepts, conventions- -

Double entry system of Book keeping – Accounting rules- Journal- ledger- Trial balance-
Trading and Profit and Loss account- Balance Sheet. ( Simple Problems).
Suggested Readings:
1. Henry Malcom Steinar-Engineering Economics, Principles, McGraw Hill Pub.
2. D.D.Chaturvedi, S.L.Gupta, Business Economics - Theory and Applications, International
Book House Pvt. Ltd. 2013.
3. Jain and Narang” Accounting, Kalyani Publishers.
4. Arora, M.N.” Cost Accounting, Vikas Publication.
5. S.N.Maheshwari, Financial Management, Vikas Publishing House.
MICROPROCESSORS AND CONTROLLERS

3 1 0 4
Pre-requisite:
Course Objectives
1. To familiarize the architecture of microprocessors and micro controllers
2. To provide the knowledge about interfacing techniques of bus & memory.
3. To provide the concepts of ARM architecture
4. To emphasize the basic concepts of Advanced ARM processors
Course Outcomes
1. To explore the internal architecture, organization and assembly language programming of
8086 processors for designing memory and I/O interfaces.
2. To explore the internal architecture, organization and assembly language programming of
8051/controllers to design micro controller based SDK blocks.
3. To explore the internal architecture of ARM processors and basic concepts of advanced
ARM processor band systems.
UNIT I
8086 Architecture
8086 Architecture-Functional diagram, Register Organization, Memory Segmentation,
Programming Model, Memory addresses, Physical Memory Organization, Architecture of 8086,
Signal descriptions of 8086, interrupts of 8086.
Instruction Set and Assembly Language Programming of 8086
Instruction formats, Addressing modes, Instruction Set, Assembler Directives, Macros, and
Simple Programs involving Logical, Branch and Call Instructions, Sorting, String Manipulations.
UNIT II
Introduction to Microcontrollers
Overview of 8051 Microcontroller, Architecture, I/O Ports, Memory Organization, Addressing
Modes and Instruction set of 8051.
8051 Real Time Control
Programming Timer Interrupts, Programming External Hardware Interrupts, Programming the
Serial Communication Interrupts, Programming 8051 Timers and Counters
UNIT III
I/O And Memory Interface
LCD, Keyboard, External Memory RAM, ROM Interface, ADC, DAC Interface to 8051.
Serial Communication and Bus Interface
Serial Communication Standards, Serial Data Transfer Scheme, On board Communication
Interfaces-I2C Bus, SPI Bus, UART; External Communication Interfaces-RS232,USB.
UNIT IV
ARM Architecture
ARM Processor fundamentals, ARM Architecture – Register, CPSR, Pipeline, exceptions and
interrupts interrupt vector table, ARM instruction set – Data processing, Branch instructions,
load store instructions, Software interrupt instructions, Program status register instructions,
loading constants, Conditional execution, Introduction to Thumb instructions.
Unit V
ARM Processors
Introduction to CORTEX Processor and its architecture, OMAP Processor and its Architecture.
TEXT BOOKS
1. Advanced Microprocessors and Peripherals – A. K. Ray and K.M. Bhurchandani, TMH, 2 nd
Ed., 2006.
2. ARM System Developers guide, Andrew N Sloss, Dominic Symes, Chris Wright, Elsevier,
2012
REFERENCES
1. The 8051 Microcontroller, Kenneth. J. Ayala, Cengage Learning, 3 rd Ed, 2004.

2. Microprocessors and Interfacing, D. V. Hall, TMGH, 2nd Edition 2006.
3. The 8051Microcontrollers, Architecture and Programming and Applications - K.Uma Rao,
Andhe Pallavi, Pearson, 2009.
4. Digital Signal Processing and Applications with the OMAP-L138 Experimenter, Donald
Reay,WILEY 2012.
COMPUTER NETWORKS

3 1 0 4
Pre-requisite: Digital Communications
Course Objectives
1. To understand the source and channel coding schemes.
2. To introduce the fundamental various types of computer networks.
3. To demonstrate the TCP/IP and OSI models with merits and demerits.
4. To introduce the concepts of various layers.
Course Outcomes
1. Compare network models, network types and transmission media.

2. Analyze the Data link layer Protocols, And Routing algorithms
3. Utilizing the connection oriented and connectionless service, and web applications
4. Design a wireless networks using IEEE standards.
UNIT I
Computer Networks and the Internet
Internet, Network Edge, the Network Core, Delay and Loss in Packet-Switched Networks,
Protocol Layers and Their Service Models.
Network Models
Layered Tasks, OSI Model, Layers in OSI Model, TCP/IP Protocol Suite, Addressing.
Transmission Media
Guided Media, Unguided Media- Wireless.
UNIT II
Data Link Layer
Channel coding- Hamming coding, Block Coding, Cyclic Codes, Checksum, Framing, Flow
and Error Control, Noiseless Channels, Noisy Channels, HDLC, Point-to-Point Protocol (PPP),
Random Access, Controlled Access, Channelization.
UNIT III
Network Layer
Introduction Virtual Circuit and Datagram Networks, Internet Protocols-IPv4 and IPv6, Router,
Routing Algorithms, Broadcast and Multicasting Routing.
UNIT IV
Transport Layer
Transport-Layer Services, Multiplexing and Demultiplexing, Connectionless Transport - UDP,
Principles of Reliable Data Transfer, Connection-Oriented Transport-TCP, Principles of
Congestion Control.
Application Layer
Principles of Network Applications, WWW and HTTP, FTP, Electronic Mail in the Internet,
DNS—The Internet’s Directory Service, Peer-to-Peer Applications, Socket Programming,
Creating Network Applications.
UNIT V
Wireless and Mobile Networks
Introduction, Wireless Links and Network Characteristics, Wi-Fi, IEEE 802.11 Wireless LANs,
IEEE 802.15, IEEE 802.16, Concept of OFDM with Block Diagram.
TEXT BOOKS
1. Data Communications and Networking – Behrouz A. Forouzan, 4 th & 5th Ed., TMH, 2006.
2. Computer Networks -- Andrew S Tanenbaum, 3th Ed., Pearson Education, 1999.
REFERENCES
1. Computer and Communication Networks, Nader F. Mir, Pearson Education, 2010.
2. Computer Networking: A Top-Down Approach Featuring the Internet, James F.Kurose,
K.W.Ross, 3rd Ed., Pearson Education, 2010.
3. Data and Computer Communications, G.S.Hura and M.Singhal, CRC Press, Taylor and
Francis Group, 2010.
4. Data Communications and Computer Networks, P.C.Gupta, PHI, 2 nd Ed., 2010.
CONTROL SYSTEMS

3 1 0 4
Pre-requisite: Network Analysis & Transmission lines
Course Objectives: Objectives of course are

1. To introduce the principles and applications of control systems in everyday life
2. To introduce the basic concepts of block diagram reduction, time domain analysis
solutions to time invariant systems
3. To understand different aspects of stability analysis of systems in frequency domain and
time domain.
Course Outcomes:
After completing this course, the student will be able to
1. Knowledge on Open and closed loop and also modeling and transfer function derivations
of translational and rotational systems.
2. Represent transfer functions through block diagrams and signal flow graphs.
3. Designing control systems using time domain and frequency domain techniques.
4. Time response analysis, stability analysis, frequency response analysis of different
ordered systems through their characteristic equation and time-domain specifications.
UNIT I
Introduction
Concepts of Control Systems- Open Loop and closed loop control systems and their differences-
examples of control systems- Classification of control systems, Feed-Back Characteristics,
Effects of feedback.
Mathematical models – Differential equations, Impulse Response and transfer functions -
Translational and Rotational mechanical systems.
Transfer Function Representation
Transfer Function of DC Servo motor - AC Servo motor- Synchro transmitter and Receiver,
Block diagram representation of systems considering electrical systems as examples -Block
diagram algebra – Representation by Signal flow graph - Reduction using mason’s gain formula.
UNIT II
Time Response Analysis
Standard test signals - Time response of first order systems – Characteristic Equation of
Feedback control systems, Transient response of second order systems - Time domain
specifications – Steady state response - Steady state errors and error constants – Effects of
proportional derivative, proportional integral systems.
UNIT III
Stability Analysis
The concept of stability - Routh stability criterion – qualitative stability and conditional stability.
Root Locus Technique
The root locus concept - construction of root loci-effects of adding poles and zeros to G(s) H(s)
on the root loci.
Frequency Response Analysis
Introduction, Frequency domain specifications-Bode diagrams-Determination of Frequency
domain specifications and transfer function from the Bode Diagram-Phase margin and Gain
margin-Stability Analysis from Bode Plots.
UNIT IV
Stability Analysis In Frequency Domain
Polar Plots, Nyquist Plots and applications of Nyquist criterion for stability –Effects of adding
poles and zeros.
Classical Control Design Techniques
Compensation techniques – Lag, Lead, and Lead-Lag Controllers design in frequency Domain,
PID Controllers.
UNIT V
State Space Analysis Of Continuous Systems
Concepts of state, state variables and state model, derivation of state models from block
diagrams, Diagonalization, Solving the Time invariant state Equations, State Transition Matrix
and its Properties.
TEXT BOOKS
1. Control Systems Engineering – by I. J. Nagrath and M. Gopal, New Age International (P)
Limited, Publishers, 2nd edition.
2. Modern Control Engineering – by Katsuhiko Ogata – Prentice Hall of India Pvt. Ltd., 3 rd
edition, 1998.
REFERENCES
1. Control Systems by N.K.Sinha, New Age International (P) Limited Publishers, 3 rd Edition,
1998.
2. Automatic Control Systems 8th edition– by B. C. Kuo 2003– John wiley and son’s.,
3. Control Systems Engg. by NISE 3rd Edition – John wiley
4. Control Systems by S.Kesavan , Hitech Publications.
5. “Modeling & Control Of Dynamic Systems” by Narciso F. Macia George J. Thaler,
Thomson Publishers.
OPERATING SYSTEMS
(PE 1)

3 0 0 3
Prerequisites: Computer Programming and Data Structures
Course Objectives
1. Provide an introduction to operating system concepts (i.e., processes, threads, scheduling,
synchronization, deadlocks, memory management, file and I/O subsystems and
protection).
2. Introduce the issues to be considered in the design and development of operating system.
3. To know the basic Unix commands, system call interface for process management,
interprocess communication and I/O in Unix.
Course Outcomes
1. Gain practical knowledge of operating systems and architectures interact.

2. Knowledge on Scheduling, deadlocks, process management and synchronization.
3. Acquaintance to Memory Management and Virtual Memory.
4. Ability to recognize and resolve user problems with standard operating environments.
UNIT I
Operating System Introduction, Structures - Simple Batch, Multi-programmed, Time-
shared, Personal Computer, Parallel, Distributed Systems, Real-Time Systems, System
components, Operating System services, System Calls.
UNIT II
Process and CPU Scheduling - Process concepts and scheduling, Operations on processes,
Cooperating Processes, Threads, and Interposes Communication, Scheduling Criteria,
Scheduling Algorithms, Multiple -Processor Scheduling.
System call interface for process management-fork, exit, wait, waitpid, exec
UNIT – III
Deadlocks - System Model, Deadlocks Characterization, Methods for Handling Deadlocks,
Deadlock Prevention, Deadlock Avoidance, Deadlock Detection, and Recovery from
Deadlock.
Process Management and Synchronization - The Critical Section Problem,
Synchronization Hardware, Semaphores, and Classical Problems of Synchronization, Critical
Regions, Monitors.
Interprocess Communication Mechanisms: IPC between processes on a single computer
system, IPC between processes on different systems, using pipes, FIFOs, message queues,
shared memory.
UNIT IV
Memory Management and Virtual Memory - Logical versus Physical Address Space,
Swapping, Contiguous Allocation, Paging, Segmentation, Segmentation with Paging,
Demand Paging, Page Replacement, Page Replacement Algorithms.
UNIT V
File System Interface and Operations -Access methods, Directory Structure, Protection,
File System Structure, Allocation methods, Free-space Management. Usage of open, create,
read, write, close, lseek, stat, ioctl, system calls.
TEXT BOOKS
1. Operating System Principles- Abraham Silberchatz, Peter B. Galvin, Greg Gagne 7 th

Edition, John Wiley.
2. Advanced programming in the Unix environment, W.R.Stevens, Pearson education.
REFERENCE
1. Operating Systems – Internals and Design Principles Stallings, 5th Ed., Pearson
Education/PHI, 2005.
2. Operating System A Design Approach-Crowley, TMH.
3. Modern Operating Systems, Andrew S Tanenbaum, 2nd Ed., Pearson/PHI.
4. Unix programming environment, Kernighan and Pike, PHI. / Pearson Education.
5. Unix Internals The New Frontiers, U.Vahalia, Pearson Education.
OBJECT ORIENTED PROGRAMMING THROUGH JAVA
(PE 1)

3 0 0 3
Prerequisites: Computer Programming & Data Structures
Course Objectives
1. Introduces object oriented programming concepts using the Java language.
2. To know the principle of inheritance and polymorphism and demonstrates how they
relate to the design of abstract classes
3. Able to implement packages, interfaces, exception handling, event handling and
multithreading
4. To design of Graphical User Interface using applets and swings
Course Outcomes
1. Learn the object oriented concepts using the JAVA programming

2. Understand benefits of inheritance, creating packages and implement of interfaces
3. Differentiate between multi threading and multitasking.
4. Understand the concepts of Exception, Event handling, Applets and Swing.
UNIT I
Object oriented thinking and Java Basics- Need for oop paradigm, summary of oop concepts,
coping with complexity, abstraction mechanisms. A way of viewing world – Agents,
responsibility, messages, methods, History of Java, Java buzzwords, data types, variables, scope
and life time of variables, arrays, operators, expressions, control statements, type conversion and
casting, simple java program, concepts of classes, objects, constructors, methods, access control,
this keyword, garbage collection, overloading methods and constructors, method binding,
inheritance, overriding and exceptions, parameter passing, recursion, nested and inner classes,
exploring string class.
UNIT II
Inheritance, Packages and Interfaces – Hierarchical abstractions, Base class object, subclass,
subtype, substitutability, forms of inheritance- specialization, specification, construction,
extension, limitation, combination, benefits of inheritance, costs of inheritance. Member access
rules, super uses, using final with inheritance, polymorphism- method overriding, abstract
classes, the Object class.
Defining, Creating and Accessing a Package, Understanding CLASSPATH, importing packages,
differences between classes and interfaces, defining an interface, implementing interface,
applying interfaces, variables in interface and extending interfaces.
Exploring java.io.
UNIT III
Exception handling and Multithreading-- Concepts of exception handling, benefits of
exception handling, Termination or resumptive models, exception hierarchy, usage of try, catch,
throw, throws and finally, built in exceptions, creating own exception sub classes.
String handling,Exploring java.util.Differences between multi threading and multitasking, thread
life cycle,creating threads, thread priorities, synchronizing threads, interthread communication,
thread groups,daemon threads.
Enumerations, autoboxing, annotations, generics.
UNIT IV
Event Handling: Events, Event sources, Event classes, Event Listeners, Delegation event
model, handling mouse and keyboard events, Adapter classes.
The AWT class hierarchy, user interface components- labels, button, canvas, scrollbars, text
components, check box, check box groups, choices, lists panels – scrollpane, dialogs, menubar,
graphics, layout manager – layout manager types – border, grid, flow, card and grid bag.
UNIT V
Applets – Concepts of Applets, differences between applets and applications, life cycle of an
applet, types of applets, creating applets, passing parameters to applets.
Swing – Introduction, limitations of AWT, MVC architecture, components, containers,
exploring swing- JApplet, JFrame and JComponent, Icons and Labels, text fields, buttons – The
JButton class, Check boxes, Radio buttons, Combo boxes, Tabbed Panes, Scroll Panes, Trees,
and Tables.
TEXT BOOKS
1. Java the complete reference, 7th editon, Herbert Schildt, TMH.

2. Understanding OOP with Java, updated edition, T. Budd, Pearson Eduction.
REFERENCES
1. An Introduction to programming and OO design using Java, J.Nino and F.A. Hosch, John
Wiley & sons.
2. Introduction to Java programming, Y. Daniel Liang, Pearson Education.
3. An introduction to Java programming and object oriented application development,
R.A. Johnson- Thomson.
DATA ANALYTICS
(PE 1)
3 0 0 3
Course Objectives
1. To gain the knowledge in data management, Processing and Analytics.
2. To know the concepts of Regression and its models.
3. To know the concepts of Segmentation and its models.
4. To gain the knowledge on Data Visualization and its techniques.
Course Outcomes
1. Know the data management and its processing.
2. Capable to model the data using tools.
3. Differentiate between regression and Segmentation of data.
4. Learn various Visualization techniques.
UNIT – I
Data Management: Design Data Architecture and manage the data for analysis, understand
various sources of Data like Sensors/Signals/GPS etc. Data Management, Data Quality (noise,
outliers, missing values, duplicate data) and Data Processing.
UNIT – II
Data Analytics: Introduction to Analytics, Introduction to Tools and Environment, Application
of Modeling in Business, Databases & Types of Data and variables, Data Modeling Techniques,
Missing Imputations etc. Need for Business Modeling.
UNIT – III
Regression – Concepts, Blue property assumptions, Least Square Estimation, Variable
Rationalization, and Model Building etc.
Logistic Regression: Model Theory, Model fit Statistics, Model Construction, Analytics
applications to various Business Domains etc.
UNIT – IV
Object Segmentation: Regression Vs Segmentation – Supervised and Unsupervised Learning,
Tree Building – Regression, Classification, Overfitting, Pruning and Complexity, Multiple
Decision Trees etc.
Time Series Methods: Arima, Measures of Forecast Accuracy, STL approach, Extract features
from generated model as Height, Average Energy etc and Analyze for prediction
UNIT – V
Data Visualization: Pixel-Oriented Visualization Techniques, Geometric Projection
Visualization Techniques, Icon-Based Visualization Techniques, Hierarchical Visualization
Techniques, Visualizing Complex Data and Relations.
TEXT BOOKS
1. Student’s Handbook for Associate Analytics – II, III.
2. Data Mining Concepts and Techniques, Han, Kamber, 3 rd Edition, Morgan Kaufmann
Publishers.
REFERENCES
1. Introduction to Data Mining, Tan, Steinbach and Kumar, Addision Wisley, 2006.
2. Data Mining Analysis and Concepts, M. Zaki and W. Meira
3. Mining of Massive Datasets, Jure Leskovec Stanford Univ. Anand RajaramanMilliway
MICROPROCESSORS AND CONTROLLERS LABORATORY

0 0 3 1.5
Cycle 1: Using 8086 Processor Kits and/or Assembler (5 Weeks)
 Assembly Language Programs to 8086 to Perform

1. Arithmetic, Logical, String Operations on 16 Bit and 32 Bit Data.
2. Bit level Logical Operations, Rotate, Shift, Swap and Branch Operations.
Cycle 2: Using Microcontroller Kit (6 weeks)

 Introduction to IDE
1. Assembly Language Programs to Perform Arithmetic (Both Signed and Unsigned) 16
Bit Data Operations, Logical Operations (Byte and Bit Level Operations), Rotate,
Shift, Swap and Branch Instructions
2. Time delay Generation Using Timers of Microcontroller
3. Serial Communication from / to Microcontroller to / from I/O devices.
4. Program Using Interrupts to Generate Square Wave 10 KHZ Frequency.
5. Using Timer Microcontroller in 8bit Auto reload Mode and Connect a 1HZ Pulse to
Interrupt pin and Display on GPIO. Assume Crystal Frequency as 11.0592MHZ
Cycle 3: Interfacing I/O Devices to Microcontroller (5 Weeks)

1. 7 Segment Display to Microcontroller and display digit 0 to 9.
2. 4*4 Matrix Keypad to Microcontroller.
3. Sequence Generator Using Serial Interface in Microcontroller.
4. 8bit ADC Interface to Microcontroller for different analog signals.
5. Triangular, Square and Ramp Wave form Generator through DAC interfaces to
Microcontroller.
6. Location identification through GPS interface.
BOOKS
1. Advanced Microprocessors And Peripherals by A K Ray, Tata McGraw-Hill
Education, 2006
2. The 8051 Microcontrollers: Architecture, Programming & Applications by Dr. K.
Uma Rao, Andhe Pallavi, Pearson, 2009.
COMPUTER NETWORKS LABORATORY

0 0 3 1.5
Note:
A. Minimum of 12 Experiments have to be conducted
B. All the Experiments may be Conducted using Network Simulation software likeNS-2/NS
3/ NSG-2.1/Wire SHARK/ etc..
Note: For Experiments 2 to 10 Performance may be evaluated through simulation by using the
parameters Throughput, Packet Delivery Ratio, Delay etc.
1. Writing a TCL Script to create two nodes and links between nodes
2. Writing a TCL Script to transmit data between nodes
3. Evaluate the performance of various LAN Topologies
4. Evaluate the performance of Drop Tail and RED queue management schemes
5. Evaluate the performance of CBQ and FQ Scheduling Mechanisms
6. Evaluate the performance of TCP and UDP Protocols
7. Evaluate the performance of TCP, New Reno and Vegas
8. Evaluate the performance of AODV and DSR routing protocols
9. Evaluate the performance of AODV and DSDV routing protocols
10. Evaluate the performance of IEEE 802.11 and IEEE 802.15.4
11. Evaluate the performance of IEEE 802.11 and SMAC
12. Capturing and Analysis of TCP and IP Packets
13. Simulation and Analysis of ICMP and IGMP Packets
14. Analyze the Protocols SCTP , ARP, NetBIOS, IPX VINES
15. Analysis of HTTP ,DNS and DHCP Protocols
* Simulation of the above experiments to be conducted using NS-2, NSG 2.1, Wire Shark.
ADVANCED ENGLISH LANGUAGE AND COMMUNICATION SKILLS (AECS)
LABORATORY

0 0 2 1
1. Introduction
The introduction of the Advanced English Communication Skills Lab is considered essential at
3rd year level. At this stage, the students need to prepare themselves for their careers which may
require them to listen to, read, speak and write in English both for their professional and
interpersonal communication in the globalised context.
The proposed course should be a laboratory course to enable students to use ‘good’ English and
perform the following:
 Gathering ideas and information to organize ideas relevantly and coherently.
 Engaging in debates.
 Participating in group discussions.
 Facing interviews.
 Writing project/research reports/technical reports.
 Making oral presentations.
 Writing formal letters.
 Transferring information from non-verbal to verbal texts and vice-versa.
 Taking part in social and professional communication.
2. Objectives:
This Lab focuses on using multi-media instruction for language development to meet the
following targets:
 To improve the students’ fluency in English, through a well-developed vocabulary and
enable them to listen to English spoken at normal conversational speed by educated
English speakers and respond appropriately in different socio-cultural and professional
contexts.
 Further, they would be required to communicate their ideas relevantly and coherently in
writing.
 To prepare all the students for their placements.
3. Syllabus:
The following course content to conduct the activities is prescribed for the Advanced English
Communication Skills (AECS) Lab:
1. Activities on Fundamentals of Inter-personal Communication and Building Vocabulary
- Starting a conversation – responding appropriately and relevantly – using the right body
language – Role Play in different situations & Discourse Skills- using visuals - Synonyms
and antonyms, word roots, one-word substitutes, prefixes and suffixes, study of word origin,
business vocabulary, analogy, idioms and phrases, collocations & usage of vocabulary.
2. Activities on Reading Comprehension –General Vs Local comprehension, reading for
facts, guessing meanings from context, scanning, skimming, inferring meaning, critical
reading& effective googling.
3. Activities on Writing Skills – Structure and presentation of different types of writing – letter
writing/Resume writing/ e-correspondence/Technical report writing/ – planning for writing –
improving one’s writing.
4. Activities on Presentation Skills – Oral presentations (individual and group) through JAM
sessions/seminars/PPTs and written presentations through posters/projects/reports/
e-mails/assignments etc.
5. Activities on Group Discussion and Interview Skills – Dynamics of group discussion,
intervention, summarizing, modulation of voice, body language, relevance, fluency and
organization of ideas and rubrics for evaluation- Concept and process, pre-interview
planning, opening strategies, answering strategies, interview through tele-conference &
video-conference and Mock Interviews.
4. Minimum Requirement:
The Advanced English Communication Skills (AECS) Laboratory shall have the following
infrastructural facilities to accommodate at least 35 students in the lab:
 Spacious room with appropriate acoustics.
 Round Tables with movable chairs
 Audio-visual aids
 LCD Projector
 Public Address system
 P – IV Processor, Hard Disk – 80 GB, RAM–512 MB Minimum, Speed – 2.8
GHZ
 T. V, a digital stereo & Camcorder
 Headphones of High quality
5. Suggested Software:
The software consisting of the prescribed topics elaborated above should be procured and
used.
 Oxford Advanced Learner’s Compass, 7th Edition
 DELTA’s key to the Next Generation TOEFL Test: Advanced Skill Practice.
 Lingua TOEFL CBT Insider, by Dreamtech
 TOEFL & GRE( KAPLAN, AARCO&BARRONS, USA, Cracking GRE by CLIFFS)
6. Books Recommended:
1. Effective Technical Communication by M Asharaf Rizvi. McGraw Hill Education (India)
Pvt. Ltd. 2nd Edition
2. Academic Writing: A Handbook for International Students by Stephen Bailey,
Routledge, 5th Edition
3. Learn Correct English – A Book of Grammar, Usage and Composition by Shiv K.
Kumar and Hemalatha Nagarajan. Pearson 2007
4. Professional Communication by Aruna Koneru, McGraw Hill Education (India) Pvt. Ltd,
2016.
5. Technical Communication by Meenakshi Raman & Sangeeta Sharma, Oxford University
Press 2009.
6. Technical Communication by Paul V. Anderson. 2007. Cengage Learning pvt. Ltd. New
Delhi.
7. English Vocabulary in Use series, Cambridge University Press 2008.
8. Handbook for Technical Communication by David A. McMurrey& Joanne Buckley.
2012. Cengage Learning.
9. Communication Skills by Leena Sen, PHI Learning Pvt Ltd., New Delhi, 2009.
10. Job Hunting by Colm Downes, Cambridge University Press 2008.
11. English for Technical Communication for Engineering Students, Aysha Vishwamohan,
Tata Mc Graw-Hil 2009.
**********
ANTENNAS AND PROPAGATION
III Year B.Tech. ECE II Semester L T P C

3 1 0 4
Pre-requisite: Network Analysis and Transmission Lines, Electromagnetic Fields and Waves
Course Objectives
The course objectives are:
1. To understand the significance of antenna parameters, to derive and analyze the
radiation characteristics of various antennas
2. To analyze the characteristics and design relations of UHF, VHF and Microwave
Antennas and to identify the antenna array requirements, to determine the
characteristics of various Antenna Arrays.
3. To understand the concepts and set-up requirements for microwave measurements,
and familiarize with the procedure to enable antenna measurements.
4. To define and distinguish between different phenomenon of wave propagation
(ground wave, space wave and sky wave), their frequency dependence, and estimate
their characteristics, identifying their profiles and parameters involved.
Course Outcomes
Upon completing this course,
1. Should be able to Characterize the antennas based on frequency and geometrical

configuration
2. Should be able to plot the radiation patterns of VHF, UHF and Microwave antennas and
also antenna arrays.
3. Specify the requirements for microwave measurements and arrange a setup to carry
out the antenna far zone pattern and gain measurements in the laboratory.
4. Classify the different wave propagation mechanisms, determine the characteristic
features of different wave propagations, and estimate the parameters involved.
UNIT I
Antenna Basics
Basic Antenna Parameters – Radiation Patterns, Beam Area, Beam width , Radiation Intensity,
Beam Efficiency, Directivity, Gain, Resolution, Antenna Aperture, Effective Height. Antenna
Theorems, Retarded Potentials, Helmholtz Theorem.
Thin Linear Wire Antennas
Radiation From- Hertzian Dipole, Small thin Dipole, Infinitesimally thin Linear Antenna ,Half
Wave Dipole and Quarter Wave Monopole – Current Distributions, Field Components- Far Field
and Near Field, Radiated Power, Radiation Resistance, Beam Width, Directivity, Gain , Effective
Area and Effective Height. Loop Antennas - Small Loop, Comparison of Far Fields of Small
Loop and Short Dipole, Radiation Resistances and Directivities of Small Loops (Qualitative
Treatment).
UNIT II
Antenna Arrays
Point Sources – Definition, Patterns, and arrays of two Isotropic Sources - Different Cases.
Principle of Pattern Multiplication, Uniform Linear Arrays – Broadside Arrays, End fire Arrays,
EFA with Increased Directivity, Derivation of their Characteristics and Comparison, BSA with
Non-uniform Amplitude Distributions – General Considerations, and Binomial Arrays.
Antenna Measurements
Introduction, Concepts - Reciprocity, Near and Far Fields, Coordinate System, Sources of Errors.
Patterns to be Measured, Directivity Measurement, Gain Measurements (by Comparison,
Absolute and 3-Antenna Methods).
UNIT III
VHF, UHF and Microwave Antennas - I
Arrays with Parasitic Elements, Yagi-Uda Array, Folded Dipoles and their Characteristics.
Helical Antennas – Helical Geometry, Helix Modes, Practical Design Considerations for
Monofilar Helical Antenna in Axial and Normal Modes. Horn Antennas – Types, Fermat’s
Principle, Optimum Horns, Design Considerations of Pyramidal Horns.
UNIT IV
VHF, UHF and Microwave Antennas – II
Microstrip Antennas – Introduction, Features, Advantages and Limitations. Rectangular Patch
Antennas – Geometry and Parameters, Characteristics of Microstrip Antennas. Reflector
Antennas – Introduction, Flat Sheet and Corner Reflectors, Paraboloidal Reflectors – Geometry,
Pattern Characteristics, Feed Methods, Reflector Types – Related Features.
UNIT V
Propagation
Definitions, Categorizations and General Classifications, Different Modes of Wave Propagation,
Ray/Mode Concepts. Ground Wave Propagation - Plane Earth Reflections, Space and Surface
Waves, Wave Tilt, Curved Earth Reflections. Space Wave Propagation - Field Strength
Variation with Distance and Height, Effect of Earth’s Curvature, Absorption, Super Refraction,
M-Curves and Duct Propagation, Scattering Phenomena, Troposphere Propagation. Sky Wave
Propagation - Structure of Ionosphere, Refraction and Reflection of Sky Waves by Ionosphere,
Ray Path, Critical Frequency, MUF, LUF, OF, Virtual Height and Skip Distance, Relation
between MUF and Skip Distance, Multi-hop Propagation.
TEXT BOOKS
1. Antennas and Wave Propagation – J.D. Kraus, R.J. Marhefka and Ahmad S. Khan, TMH,
New Delhi, 4th ed., (Special Indian Edition), 2010.
2. Electromagnetic Waves and Radiating Systems – E.C. Jordan and K.G. Balmain, PHI, 2nd
ed., 2000.
REFERENCES
1. Antenna Theory - C.A. Balanis, John Wiley & Sons, 3rd Ed., 2005.
2. Antennas and Wave Propagation – K.D. Prasad, Satya Prakashan, Tech India Publications,
New Delhi, 2001.
3. Radio Engineering Handbook- Keith henney, 3 rd edition TMH.
4. Antenna Engineering Handbook –John Leonidas Volakis, 3 rd edition,2007
DIGITAL SIGNAL PROCESSING

3 1 0 4
Prerequisite: Signals and Systems
Course Objectives
1. To provide background and fundamental concepts for the analysis and processing of
digital signals.
2. To understand the fast computation of DFS and DFT.
3. To design digital filters and their realization structures.
4. To acquaint in Multi-rate signal processing techniques and finite word length effects.
Course Outcomes
Upon completion of this course, the student will be able to:
1. Realize various digital filters
2. Find DFTS, DFS, DFT and FFT of Digital Signal and System.
3. Design IIR and FIR digital filters from prototype approximations.
4. Implement Multirate processing system and analyze finite word length effects in DSP
applications.
UNIT I
Introduction
Introduction to Digital Signal Processing: Discrete Time Signals & Sequences, conversion of
continuous to discrete signal, Normalized Frequency, Linear Shift Invariant Systems, Stability,
and Causality, linear differential equation to difference equation, Linear Constant Coefficient
Difference Equations, Frequency Domain Representation of Discrete Time Signals and Systems.
Realization of Digital Filters
Applications of Z – Transforms, Solution of Difference Equations of Digital Filters, System
Function, Stability Criterion, Frequency Response of Stable Systems, Realization of Digital
Filters – Direct, Canonic, Cascade and Parallel Forms.
UNIT II
Discrete Fourier series
Fourier Series, Fourier Transform, Laplace Transform and Z-Transform relation, DFS
Representation of Periodic Sequences, Properties of Discrete Fourier Series, Discrete Fourier
Transforms: Properties of DFT, Linear Convolution of Sequences using DFT, Computation of
DFT: Over-Lap Add Method, Over-Lap Save Method, Relation between DTFT, DFS, DFT and
Z-Transform.
Fast Fourier Transforms
Fast Fourier Transforms (FFT) - Radix-2 Decimation-in-Time and Decimation-in-Frequency
FFT Algorithms, Inverse FFT.
UNIT III
IIR Digital Filters
Analog filter approximations – Butterworth and Chebyshev, Design of IIR Digital Filters from
Analog Filters, Step and Impulse Invariant Techniques, Bilinear Transformation Method,
Spectral Transformations.
UNIT IV
FIR Digital Filters
Characteristics of FIR Digital Filters, Frequency Response. Design of FIR Filters: Fourier
Method, Digital Filters using Window Techniques, Frequency Sampling Technique, Comparison
of IIR & FIR filters.
UNIT V
Multirate Digital Signal Processing
Introduction, Down Sampling, Decimation, Up sampling, Interpolation, Sampling Rate
Conversion.
Finite Word Length Effects
Limit cycles, Overflow Oscillations, Round-off Noise in IIR Digital Filters, Computational
Output Round Off Noise, Methods to Prevent Overflow, Trade Off Between Round Off and
Overflow Noise, Measurement of Coefficient Quantization Effects through Pole-Zero
Movement, Dead Band Effects.
TEXT BOOKS
1. Discrete Time Signal Processing – A. V. Oppenheim and R.W. Schaffer, PHI, 2009
2. Digital Signal Processing, Principles, Algorithms, and Applications: John G. Proakis,
Dimitris G. Manolakis, Pearson Education / PHI, 2007.
REFERENCES
1. Digital Signal Processing – Fundamentals and Applications – Li Tan, Elsevier, 2008

2. Fundamentals of Digital Signal Processing using MATLAB – Robert J. Schilling, Sandra L.
Harris, Thomson, 2007
3. Digital Signal Processing – K. Deergha Rao and M. N. S. Swamy, Springer, 2018.
4. Digital Signal Processing - A Practical approach, Emmanuel C. Ifeachor and Barrie W.
Jervis, 2nd Edition, Pearson Education, 2009
VLSI DESIGN

3 1 0 4
Prerequisite: Analog and Pulse circuits; Switching Theory and Logic Design
Course Objectives
The objectives of the course are to:
1. Give exposure to different steps involved in the fabrication of ICs.
2. Explain electrical properties of MOS and BiCMOS devices to analyze the behavior of
inverters with various loads.
3. Give exposure to the design rules to be followed to draw the layout of any logic circuit.
4. Provide design concepts to design building blocks of data path of any system using gates.
5. Understand basic programmable logic devices and testing of CMOS circuits.
Course Outcomes
1. Acquire qualitative knowledge about the fabrication process MOS ICs.

2. Draw the layout of any logic circuit to understand and estimate parasitic effect of any logic
circuit.
3. Design building blocks of data path systems, memories and simple logic circuits using PLA,
PAL, FPGA and CPLD.
4. Understand different types of faults that can occur in a system and learn the concept of
testing.
UNIT I
Introduction
Introduction to IC Technology – MOS, PMOS, NMOS, CMOS & BiCMOS
Basic Electrical Properties
Basic Electrical Properties of MOS and BiCMOS Circuits: Ids-Vds relationships, MOS transistor
threshold Voltage, gm, gds, Figure of merit; Pass transistor, NMOS Inverter, Various pull ups,
CMOS Inverter analysis and design, Bi-CMOS Inverters.
UNIT II
VLSI Circuit Design Processes
VLSI Design Flow, MOS Layers, Stick Diagrams, Design Rules and Layout, Transistors Layout
Diagrams for NMOS and CMOS Inverters and Gates, Scaling of MOS circuits.
UNIT III
Gate Level Design
Logic Gates and Other complex gates, Switch logic, Alternate gate circuits, Time delays, Driving
large capacitive loads, Wiring capacitance, Fan – in, Fan – out.
UNIT IV
Data Path Subsystems
Subsystem Design, Shifters, Adders, ALUs, Multipliers, Parity generators, Comparators,
Zero/One Detectors, Counters.
Array Subsystems
SRAM, DRAM, ROM, Serial Access Memories.
UNIT V
Programmable Logic Devices
Design Approach – PLA, PAL, Standard Cells FPGAs, CPLDs.
CMOS Testing
CMOS Testing, Test Principles, Design Strategies for test, Chip level Test Techniques.
TEXT BOOKS
1. Essentials of VLSI circuits and systems – Kamran Eshraghian, Eshraghian Dougles and A.
Pucknell, PHI, 2005.
2. CMOS VLSI Design – A Circuits and Systems Perspective, Neil H. E Weste, David Harris,
Ayan Banerjee, 3rd Ed., Pearson, 2009.
REFERENCES
1. Introduction to VLSI Systems: A Logic, Circuit and System Perspective – Ming-BO Lin,
CRC Press, 2011.
2. CMOS logic circuit Design - John .P. Uyemura, Springer, 2007.
3. Modern VLSI Design - Wayne Wolf, Pearson Education, 3rd Ed., 1997.
CELLULAR AND MOBILE COMMUNICATIONS
(PE - 2)
3 0 0 3
Course Objectives
1. To provide the student with an understanding of the Cellular concept, Frequency reuse,
Hand-off strategies.
2. To provide the student with an understanding of Co-channel and Non-Co-channel
interferences.
3. To give the student an understanding of cell coverage for signal and traffic, diversity
techniques and mobile antennas.
4. To give the student an understanding of frequency management, Channel assignment and
types of handoff.
Course Outcomes
1. Design a basic cellular radio system.

2. Compute Co-channel and Non Co-channel interferences and diversity.
3. Estimate Cell Coverage for Signal and Traffic by analyzing impairments due to multipath
fading channel.
4. Estimate dropped calls, and improves the frequency management, Channel assignment
and handoff mechanisms.
UNIT I
Introduction to Cellular Mobile Radio Systems
Limitations of Conventional Mobile Telephone Systems, Basic Cellular Mobile System,
Standards - First, Second, Third and Fourth Generation Cellular Wireless Systems. Uniqueness
of Mobile Radio Environment- Fading - Time Dispersion Parameters, Coherence Bandwidth,
Doppler Spread and Coherence Time.
Fundamentals of Cellular Radio System Design
Concept of Frequency Reuse, Co-Channel Interference, Co-Channel Interference Reduction
Factor, Desired C/I From a Normal Case in a Omni Directional Antenna System, System
Capacity Improving Coverage and Capacity in Cellular Systems- Cell Splitting, Sectoring,
Microcell Zone Concept.
UNIT II
Co-Channel Interference
Measurement Of Real Time Co-Channel Interference, Design of Antenna System, Antenna
Parameters and Their Effects, Diversity Techniques-Space Diversity, Polarization Diversity,
Frequency Diversity, Time Diversity.
Non-Co-Channel Interference
Adjacent Channel Interference, Near End Far End Interference, Cross Talk, Effects on Coverage
and Interference by Power Decrease, Antenna Height Decrease, Effects of Cell Site Components.
UNIT III
Cell Coverage for Signal and Traffic
Signal Reflections in Flat And Hilly Terrain, Effect of Human Made Structures, Phase
Difference Between Direct and Reflected Paths, Constant Standard Deviation, Straight Line Path
Loss Slope, General Formula for Mobile Propagation Over Water and Flat Open Area, Near and
Long Distance Propagation, Path Loss From a Point to Point Prediction Model in Different
Conditions, Merits of Lee Model.
Cell Site and Mobile Antennas
Space Diversity Antennas, Umbrella Pattern Antennas, Minimum Separation of Cell Site
Antennas, Mobile Antennas.
UNIT IV
Frequency Management and Channel Assignment
Numbering And Grouping, Setup Access And Paging Channels, Channel Assignments to Cell
Sites and Mobile Units, Channel Sharing and Borrowing, Sectorization, Overlaid Cells, Non
Fixed Channel Assignment.
UNIT V
Handoffs and Dropped Calls
Handoff Initiation, Types of Handoff, Delaying Handoff, Advantages of Handoff, Power
Difference Handoff, Forced Handoff, Mobile Assisted and Soft Handoff, Intersystem Handoff,
Introduction to Dropped Call Rates and their Evaluation.
TEXT BOOKS
1. Mobile Cellular Telecommunications – W.C.Y. Lee, Mc Graw Hill, 2 nd Ed., 1989.
2. Wireless Communications - Theodore. S. Rapport, Pearson Education, 2 nd Ed., 2002.
REFERENCES
1. Principles of Mobile Communications – Gordon L. Stuber, Springer International, 2 nd
Ed., 2001.
2. Modern Wireless Communications-Simon Haykin, Michael Moher, Pearson Eduction,
2005.
3. Wireless Communications and Networking, Vijay Garg, Elsevier Publications, 2007.
4. Wireless Communications – Andrea Goldsmith, Cambridge University Press, 2005.
INFORMATION THEORY AND CODING
(PE-2)

3 0 0 3
Course Objectives
1. To acquire the knowledge in measurement of information and errors.
2. Understand the importance of various codes for communication systems.
3. To design encoder and decoder of various codes.
4. To known the applicability of source and channel codes.
Course Outcomes
1. Learn measurement of information and errors.
2. Designing various source codes and channel codes.
3. Design encoders and decoders for block and cyclic codes.
4. Understand the significance of codes in various applications.
UNIT I
Coding for Reliable Digital Transmission and storage
Mathematical model of Information, A Logarithmic Measure of Information, Average and
Mutual Information and Entropy, Types of Errors, Error Control Strategies.
Source Codes: Shannon-Fano coding, Huffman coding
UNIT II
Linear Block Codes
Introduction to Linear Block Codes, Syndrome and Error Detection, Minimum Distance of a
Block code, Error-Detecting and Error-correcting Capabilities of a Block code, Standard array
and Syndrome Decoding, Probability of an undetected error for Linear Codes over a BSC,
Hamming Codes. Applications of Block codes for Error control in data storage system
UNIT III
Cyclic Codes
Description, Generator and Parity-check Matrices, Encoding, Syndrome Computation and Error
Detection, Decoding ,Cyclic Hamming Codes, Shortened cyclic codes, Error-trapping decoding
for cyclic codes, Majority logic decoding for cyclic codes.
UNIT IV
Convolutional Codes
Encoding of Convolutional Codes- Structural and Distance Properties, state, tree, trellis
diagrams, maximum likelihood decoding, Sequential decoding, Majority- logic decoding of
Convolution codes. Application of Viterbi Decoding and Sequential Decoding, Applications of
Convolutional codes in ARQ system.
UNIT V
BCH Codes
Minimum distance and BCH bounds, Decoding procedure for BCH codes, Syndrome
computation and iterative algorithms, Error locations polynomials for single and double error
correction.
TEXT BOOKS
1. Error Control Coding- Fundamentals and Applications –Shu Lin, Daniel J.Costello,Jr,
Prentice Hall, Inc 2014.
2. Error Correcting Coding Theory-Man Young Rhee, McGraw – Hill Publishing, 1989.
REFERENCES
1. Digital Communications- John G. Proakis, 5th Ed., TMH, 2008.
2. Introduction to Error Control Codes-Salvatore Gravano, oxford
3. Error Correction Coding – Mathematical Methods and Algorithms - Todd K.Moon, Wiley
India, 2006.
4. Information Theory, Coding and Cryptography – Ranjan Bose, 2 nd Ed., TMH, 2009.
NEURAL NETWORKS & APPLICATIONS
(PE - 2)

3 0 0 3
Pre-requisite: Nil
Course Objectives:
1. To understand the biological neural network and to model equivalent neuron models.
2. To understand the architecture, learning algorithms.
3. To known the issues of various feed forward and feedback neural networks.
4. To explore the Neuro dynamic models for various problems.
Course Outcomes
1. Understand the similarity of Biological networks and neural networks and perform
the training of neural networks using various learning rules.
2. Construct and train back propagation neural networks.
3. Build various competitive learning networks.
4. Understand and Construct a stable Hopfield network model.
UNIT – I:
Fundamental Concepts, Models & Learning Rules of Artificial Neural Systems
Biological Neuron Models and their Artificial Models Biological Neuron, McCulloch-Pitts
Neuron Model, Neuron Modeling for Artificial Neuron Models, Models of Artificial Neural
Networks; Feed Forward Network and Feed Backward Network. Neural Processing, Supervised
and Unsupervised Learning
Neural Network Learning rules: Hebbian Learning Rule, Perception Learning Rule, Delta
Learning Rule Widrow-Hoff Rule, Correlation Learning Rule, Winner –Take-All Learning Rule,
Out Star Learning Rule, Summary of Learning Rules.
UNIT – II: Single Layer Feed Forward Networks

Classification Model, Features and Decision Regions, Discriminant Functions, Linear Machine
and Minimum Distance Classification, Nonparametric Training Concept, Training and
Classification using the Discrete Perceptron: Algorithm and Examples. Single Layer Continuous
Perceptron Networks for Linearly Separable Classifications, Perceptron Convergence Theorem,
Multicategory Single Layer Perceptron Networks.
UNIT – III: Multilayer Feed Forward Networks

Linearly Nonseparable, Pattern Classification, Delta Learning Rule for Multiperception layer,
Generalized Delta Learning Rule. Feed Forward Recall and Error Back Propagation Training;
Examples of Error Back-Propagation, Training Errors, Learning Factors; Initial weights
Cumulative Weight Adjustment versus Incremental Updating, Steepness of activation function,
learning constant, momentum method, Network architecture Versus Data Representation,
Necessary number of Hidden Neurons. Application of Back propagation Networks in pattern
recognition & Image processing.
UNIT – IV: Associative Memories
Basic concepts of Linear Associator, Basic concepts of Dynamical systems, Mathematical
Foundation of Discrete-Time Hop field Networks, Mathematical Foundation of Gradient-Type
Hopfield Networks, Transient response of Continuous Time Networks, Example Solution of
Optimization Problems; Summing networks with digital outputs, Minimization of the Traveling
salesman tour length, Solving Simultaneous Linear Equations, Boltzman machines,Bidirectional
Associative Memory; Multidirectional Associative Memory, Associative Memory of Spatio-
temporal Patterns.
UNIT – V: Matching and Self-Organizing Networks

Hamming net and MAXNET Unsupervised learning of clusters, Clustering and similarity
measures Winner take all learning, recall mode, initialization of weights, separability limitations,
Counter propagation networks, Feature mapping: Self organizing feature maps, Cluster discovery
networks (ART1).
TEXT BOOKS:
1. Introduction to Artificial Neural Systems - J.M.Zurada, Jaico Publishers
2. Artificial Neural Networks - Dr. B. Yagananarayana, 1999, PHI, New Delhi.
REFERENCE BOOKS:
1. Elements of Artificial Neural Networks - Kishan Mehrotra, Chelkuri K. Mohan, Sanjay
Ranka, Penram International
2. Artificial Neural Network –Simon Haykin, 2nd Ed., Pearson Education
3. Introduction Neural Networks Using MATLAB 6.0 - S.N. Shivanandam, S. Sumati, S. N.
Deepa,1/e, TMH, New Delhi.
4. Fundamental of Neural Networks –Laurene Fausett
System Design through IoT
(OE - 1)
3 0 0 3
Pre-requisite:
Course Objectives
The objectives of the course are to
1. To provide information on the concepts of Internet of Things and applications.
2. To learn how to use of Arduino and Raspberry Pi boards.
3. To know about data handling in SDN.
Course Outcomes
1. Explore various protocols of sensor networks.
2. Program and configure Arduino boards for real world connectivity.
3. Python programming and interfacing for Raspberry Pi.
UNIT I
Introduction to Internet of Things, Characteristics of IoT, Physical design of IoT, Functional
blocks of IoT, Sensing, Actuation, Basics of Networking, Communication Protocols, Sensor
Networks.
UNIT II
Machine-to-Machine Communications, Difference between IoT and M2M, Interoperability in
IoT, Introduction to Arduino Programming, Integration of Sensors and Actuators with Arduino,
UNIT III
Introduction to Python programming, Introduction to Raspberry Pi, Interfacing Raspberry Pi
with basic peripherals, Implementation of IoT with Raspberry Pi
UNIT IV
Implementation of IoT with Raspberry Pi, Introduction to Software defined Network (SDN),
SDN for IoT, Data Handling and Analytics,
UNIT V
Cloud Computing, Sensor-Cloud, Smart Cities and Smart Homes, Connected Vehicles, Smart
Grid, Industrial IoT.
Case Study- Agriculture, Healthcare, Activity Monitoring.
TEXT BOOKS
1. The Internet of Things: Enabling Technologies, Platforms, and Use Cases, by Pethuru
Raj and Anupama C. Raman (CRC Press)
2. Make sensors: Terokarvinen, kemo, karvinen and villey valtokari, 1 st Ed., Maker Media,
2014.
REFERENCES
1. Internet of Things: A Hands-on Approach, by Arshdeep Bahga and Vijay Madisetti.
2. Fundamentals of Wireless Sensor Networks: Theory and Practice - Waltenegus Dargie,
Christian Poellabauer.
3. Beginning Sensor networks with Arduino and Raspberry Pi – Charles Bell, Apress, 2013.
DIGITAL SIGNAL PROCESSING LABORATORY

0 0 3 1.5
 The Programs shall be implemented in Software (Using MATLAB / Lab View / C

Programming/ Python Equivalent) and Hardware (Using TI / Analog Devices / Motorola
/ Equivalent DSP processors/Arduino/Raspberry pi).
 MATLAB or Equivalent Live Scripts are to be incorporated in conducting all
simulations
1. Generation of Sinusoidal Waveform / Signal based on Recursive Difference Equations.

2. To find DFT / IDFT of given DT Signal.
3. To find Frequency Response of a System given in Transfer Function/ Differential equation
form.
4. Implementation of FFT of given Sequence.
5. Determination of Power Spectrum of a given Signal(s).
6. Design and Implementation of LP FIR Filter for speech and audio signal.
7. Design and Implementation of HP IIR Filter for speech and audio signal.
8. Generation of Narrow Band Signal through Filtering.
9. Generation of DTMF Signals and Decoding of DTMF Signals using Spectrogram.
10. Implementation of Decimation & Interpolation Process.
11. Implementation of I/D Sampling Rate Converters on speech/audio signal using any of the
above hardware.
12. Impulse Response of First order and Second Order Systems.
13. Implementation of Image Inversion, Edge Detection, Color replacement using any of the
above hardware.
VLSI DESIGN LABORATORY

0 0 3 1.5
Note: Any SIX of the following experiments from each part are to be conducted (Total 12)
Part-I
The following experiments are to be designed and simulated using HDL and implement using
Zync/ Zed boards/ equivalent hardware. Simulate and synthesize at least four experiments to be
implemented on FPGA boards.
1. Realization of all the logic gates.

2. Design of 8-to-3 encoder (without and with priority) and 2-to-4 decoder.
3. Design of 8-to-1 multiplexer and 1-to-8 demultiplexer.
4. Design of 4 bit binary to gray code converter.
5. Design of 4 bit comparator.
6. Design of Full adder using 3 modeling styles.
7. Design of flip flops: SR, D, JK, T.
8. Design of 4-bit binary, BCD counters ( synchronous/ asynchronous reset) or any sequence
counter.
9. Design of Finite State Machines.
Part-II
Layout using any EDA tools.
1. Basic logic gates.
2. CMOS inverter.
3. CMOS NOR/ NAND gates.
4. CMOS XOR and MUX gates.
5. Static / Dynamic logic circuit (register cell).
6. Latch/ Flipflop.
7. Pass transistor.
8. Layout of any combinational circuit (complex CMOS logic gate).
ADVANCED COMMUNICATIONS LABORATORY

0 0 2 1
Note: Minimum Eight experiments should be conducted:
1. Study the features of Network and spectrum analyzer

2. Simulate the Radiation pattern for different antennas using HFSS/ ADS/Matlab and
compare the measurement using Network analyzer.
i. Dipole Antenna
ii. Horn antenna
iii. Microstrip Antenna etc.
3. Simulate the Radiation resistance for different antennas using HFSS/ ADS/ Matlab and
compare the measurement using Network analyzer.
i. Dipole Antenna
ii. Horn antenna
iii. Microstrip Antenna etc.
4. Plotting eye diagram for baseband signal using Matlab and verifying using Network
analyzer.
5. Plotting Constellation Diagram of QAM using Matlab and verify using kit.
6. OFDM generation and detection using Simulink and verify using kit.
7. Generation of different types of signals using Vector Signal Generator
8. Modulation analysis on digital modulated single carrier signals using Matlab.
9. Reading analog and digital sensors data using UART Using ICONT setup.
10. Collecting sensor values of remote nodes using RIME broadcasting Using ICONT setup.
MICROWAVE ENGINEERING
IV Year B.Tech. ECE I Semester L T P C

2 0 0 2
Pre-requisite: Antennas and Propagation
Course Objectives
1. To get familiarized with microwave frequency bands, their applications and to

understand the limitations and losses of conventional tubes at these frequencies.
2. To distinguish between different types of microwave tubes, their structures and
principles of microwave power generation.
3. To gain knowledge of Scattering Matrix, its formulation and utility, and establish the
S-Matrix for various types of microwave components.
4. Understand the measurement concepts at microwave frequencies.
Course Outcomes
1. Use microwave components for various applications.

2. Realize the need for solid state microwave sources and understand the principles of
solid state devices.
3. Distinguish between the different types of waveguide and ferrite components, and
select proper components for engineering applications.
4. Set up Microwave Bench for measurement of various microwave parameters.
UNIT I
Waveguide Components
Coupling Mechanisms – Probe, Loop, Aperture types. Waveguide Discontinuities – Waveguide
Windows, Tuning Screws and Posts, Matched Loads. Waveguide Attenuators – Resistive Card
and Rotary Vane type; Waveguide Phase Shifters – Dielectric and Rotary Vane type.
Scattering Matrix Properties - Waveguide Multiport Junctions - E plane and H plane Tees, Magic
Tee, S- matrix. Directional Couplers – 2 Hole, Bethe Hole, S- matrix. Ferrites– Composition and
Characteristics, Faraday rotation, Ferrite Components – Gyrator, Isolator and Circulator, S-
matrix. Cavity Resonators (qualitative treatment).
UNIT II
Microwave Tubes
Electromagnetic Spectrum and Microwave bands, Applications of microwaves, Limitations of
conventional Tubes at Microwave Frequencies, Microwave Tubes –Classification.
O-type Tubes : 2 Cavity Klystron – Structure, Re-entrant Cavities, Velocity Modulation
Process and Applegate Diagram, Bunching Process, Expressions for O/P Power and Efficiency.
Reflex Klystrons – Structure, Velocity Modulation and Applegate Diagram, Mathematical
analysis of Bunching, Power Output, Efficiency, Oscillating Modes and O/P Characteristics.
UNIT III
Helix TWTs
Types and Characteristics of Slow Wave Structures; Structure of TWT and Amplification
Process (qualitative treatment), Suppression of Oscillations, Gain Considerations.
M-Type Tubes
Introduction, Cross-field Effects, Magnetrons – Different Types, Cylindrical Traveling Wave
Magnetron – Hull Cut-off and Hartree Conditions, Modes of Resonance and PI-Mode Operation,
Separation of PI-Mode, o/p characteristics,
UNIT IV
Microwave Solid State Devices
Introduction, Classification, Applications. TE Devices – Introduction, Gunn Diodes – Principle,
RWH Theory, Characteristics, Modes of Operation - Gunn Oscillation Modes,
ATT Devices- IMPATT and TRAPATT. PIN diode, Schottky Barrier Diode.
UNIT V
Microwave Measurements
Description of Microwave Bench – Different components and their Features, Errors and
Precautions, Measurement of Attenuation, Frequency, Microwave Power using Bolometer
Bridge, Calorimetric method, VSWR meter. Standing Wave Measurements, Measurement of
Low and High VSWR, Cavity Q, Impedance Measurements.
TEXT BOOKS
1. Microwave Engineering - David M. Pozar, John Wiley & Sons (Asia) Pvt Ltd., 1989, 3rd
Ed., 2011 Reprint.
2. Microwave Devices and Circuits – Samuel Y. Liao, Pearson, 3rd Ed., 2003.
3. Microwave Engineering - Sushrut Das, Oxford University Press, India, 2015
REFERENCES
1. Microwave Engineering - G.S. Raghuvanshi, Cengage Learning India Pvt. Ltd., 2012.
2. Microwave Engineering Passive Circuits- Peter A. Rizzi, PHI, 1999.
DIGITAL IMAGE PROCESSING
(PE - 3)
IV Year B. Tech. ECE I Semester L T P C

3 0 0 3
Pre-requisite: Digital Signal Processing
Course Objectives
The objectives of this course are:
1. To provide an approach towards image processing and introduction about 2D transforms.
2. To understand various enhancement methods in time, frequency domains and restoration
techniques.
3. To understand the concepts of segmentation and Morphological operations on an image.
4. To explore the concepts of various compression techniques.
Course Outcomes
Upon completion of this course, the student will be able to:
1. Learn the fundamentals of image processing and important transformations used.
2. Perform spatial and frequency domain enhancement techniques.
3. Apply techniques for segmenting image and perform morphological operations.
4. Understand the need for compression and various compression techniques.
UNIT I
Digital Image Fundamentals & Image Transforms
Digital Image Fundamentals, Sampling and Quantization, Relationship between Pixels.
Image Transforms
2-D FFT, Properties, Walsh Transform, Hadamard Transform, Discrete Cosine Transform, Haar
Transform, Slant Transform, Hotelling Transform.
UNIT II
Image Enhancement (Spatial Domain)
Introduction, Image Enhancement in Spatial Domain, Enhancement through Point Processing,
Types of Point Processing, Histogram equalization, Gray Level Transformations, Median Filter,
Spatial Domain Low-pass and High-Pass Filtering.
Image Enhancement (Frequency Domain)
Filtering in Frequency Domain: Low Pass (Smoothing) and High Pass (Sharpening) Filters.
UNIT III
Image Restoration
Degradation Model, Algebraic Approach to Restoration, Inverse Filtering, Least Mean Square
Filters, Constrained Least Squares Restoration, Interactive Restoration.
UNIT IV
Image Segmentation
Detection of Discontinuities, Edge Linking And Boundary Detection, thresholding, Region
Oriented Segmentation.
Morphological Image Processing
Dilation and Erosion: Dilation, Structuring Element Decomposition, Erosion, Combining
Dilation and Erosion, Opening and Closing, Hit or Miss Transformation.
UNIT V
Image Compression
Redundancies and their Removal Methods, Fidelity Criteria, Image Compression Models,
Huffman and Arithmetic Coding, Error Free Compression, Lossy Compression, Lossy and
Lossless Predictive Coding, Transform Based Compression.
TEXT BOOKS
1. Digital Image Processing - Rafael C. Gonzalez, Richard E. Woods, 4 th Ed., Pearson, 2018.
2. Digital Image Processing- S Jayaraman, S Esakkirajan, T Veerakumar- TMH, 2010.
REFERENCES
1. Digital Image Processing and Analysis - Human and Computer Vision Application with
using CVIP Tools - Scotte Umbaugh, 2nd Ed., CRC Press, 2011.
2. Digital Image Processing using MATLAB – Rafael C. Gonzalez, Richard E Woods and
Steven L. Eddings, 2nd Ed., TMH, 2010.
3. Digital Image Processing and Computer Vision – Somka, Hlavac, Boyle- Cengage Learning
(Indian edition) 2008.
4. Introductory Computer Vision Imaging Techniques and Solutions- Adrian low, 2 nd Ed., BS
Publication, 2008.
SPEECH PROCESSING
(PE - 3)
3 0 0 3
Pre-requisite: Signals and Systems and Probability Theory and Stochastic Processes
Course Objectives
The objectives of this course are to make the student

1. Understand the anatomy and Physiology of Speech Production system and perception
model and to design an electrical equivalent of Acoustic model for Speech Production.
2. To analyze the speech in time domain and extract various time domain parameters which
can be used for various applications like pitch extraction, end point detection, Speech
Compression, Speech Synthesis etc.,
3. To study the concept of Homomorphic system and its use in extracting the vocal tract
information from speech using Cepstrum which is a bye product of Homomorphic
processing of Speech.
4. To study various Speech Signal Processing applications viz: Speech Enhancement,
Speech Recognition, Speaker Recognition.
Course Outcomes
On completion of this course student will be able to

1. Model an electrical equivalent of Speech Production system.
2. Extract the LPC coefficients that can be used to Synthesize or compress the speech.
3. Design a Homomorphic Vocoder for coding and decoding of speech.
4. Enhance the speech and can design an Isolated word recognition system using HMM.
5. Extract the features for Automatic speaker recognition system which can used for
classification.
UNIT I
Fundamentals of Digital Speech Processing
Anatomy & Physiology of Speech Organs, The process of Speech Production, The Acoustic
Theory of Speech Production – Uniform lossless tube model, effect of losses in vocal tract, effect
if radiation at lips, Digital models for speech signals.
UNIT II
Time Domain Models for Speech Processing
Introduction- Window considerations, Short time energy and average magnitude Short time
average zero crossing rate, Speech vs Silence discrimination using energy and zero crossing,
Pitch period estimation using a parallel processing approach. The short time autocorrelation
function, The short time average magnitude difference function, Pitch period estimation using
the autocorrelation function.
UNIT III
Linear predictive Coding (LPC) Analysis
Basic principles of Linear Predictive Analysis : The Autocorrelation Method, The Covariance
Method, Solution of LPC Equations: Cholesky Decomposition Solution for Covariance Method,
Durbin’s Recursive Solution for the Autocorrelation Equation, comparison between the Method
of Solution of the LPC Parameters: Pitch Detection using LPC Parameters, Formant Analysis
using LPC Parameters.
UNIT IV
Homomorphic Speech Processing
Introduction Homomrphic Systems for Convolution: Properties of the Complex Cepstrum,
Computational Considerations, The Complex Cepstrum of Speech, pitch Detection, Formant
Estimation, and The Homomorphic Vocoder.
Speech Enhancement-Nature of interfering sounds, Speech enhancement techniques: Single
microphone Approach: spectral subtraction, Enhancement by re-synthesis, Comb filter, Wiener
filter, Multi microphone Approach.
UNIT V
Automatic Speech & Speaker Recognition
Basic pattern recognition approaches, parametric representation of speech, evaluating the
similarity of speech patterns, isolated digit Recognition System, Continuous digit Recognition
System
Hidden Markov Model (HMM) for Speech
Hidden Markov Model (HMM) for speech recognition, Viterbi algorithm, Training and testing
using HMMS.
Speaker Recognition
Recognition techniques, Features that distinguish speakers, Speaker Recognition Systems:
Speaker Verification Systems, Speaker identification Systems.
TEXT BOOKS
1. Digital Processing of Speech Signals – L.R. Rabiner S. W. Schafer. Pearson Education.

2. Speech Communication : Human & Machine – Douglas O’ Shaughnessy, 2 nd Ed., EEE
Press.
3. Digital Processing of Speech Signals L.R Rabinar and RW Jhaung, 1978, PHI.
REFERENCES
1. Discrete Time Speech Signal Processing: Principles and Practice – Thomas F.

Quateri, 1st Ed., PE.
2. Speech & Audio Signal Processing – Ben Gold & Nelson Morgan, 1 st Ed., Wiley.
SCRIPTING LANGUAGES
(PE - 3)
3 0 0 3
Pre-requisite: Nil
Course Objectives
The objectives of this course are:
1. Understand the difference between scripting and non- scripting languages.
2. To learn strengths and weaknesses of scripting languages.
3. To understand the usage of regular expressions, text processing, client and server level
scripting.
Course Outcomes
Upon completing this course, the student will be able
1. To get hands on with Linux environment and network functionality.

2. To write simple scripts to automate system administration tasks and applications.
3. To use syntax and schematics of scripting languages
UNIT I
Linux Basics
Introduction to Linux, File System of the Linux, General usage of Linux kernel & basic
commands, Linux users and group, Permissions for file, directory and users, searching a file &
directory, zipping and unzipping concepts.
UNIT II
Linux Networking
Introduction to Networking in Linux, Network basics & Tools, File Transfer Protocol in Linux,
Network file system, Domain Naming Services, Dynamic hosting configuration Protocol &
Network information Services.
UNIT III
PERL Scripting.
Introduction to Perl Scripting, working with simple values, Lists and Hashes, Loops and
Decisions, Regular Expressions, Files and Data in Perl Scripting, References & Subroutines,
Running and Debugging Perl, Modules, Object – Oriented Perl.
UNIT IV
Tcl / Tk Scripting
Tcl Fundamentals, String and Pattern Matching, Tcl Data Structures, Control Flow Commands,
Procedures and Scope, Evel, Working with Unix, Reflection and Debugging, Script Libraries, Tk
Fundamentals, Tk by examples, The Pack Geometry Manager, Binding Commands to X Events,
Buttons and Menus, Simple Tk Widgets, Entry and List box Widgets Focus, Grabs and Dialogs.
UNIT V
Python Scripting
Introduction to Python, using the Python Interpreter, More Control Flow Tools, Data Structures,
Modules, Input and Output, Errors and Exceptions, Classes, Brief Tour of the Standard Library.
TEXT BOOKS
1. Practical Programming in Tcl and Tk by Brent Welch, Updated for Tcl 7.4 and Tk 4.0.
2. Red Hat Enterprise Linux 4 : System Administration Guide Copyright, Red Hat Inc, 2005.
3. Python for scientist – John M. Stewart, 2nd Ed., Cambridge University Press, 2017.
REFERENCES
1. Learning Python – Mark Lutz and David Ascher, 2nd Ed., O’Reilly, 2003.
2. Learning Perl – Randal Schwartz, Tom Phoenix and Brain d foy, 4 th Ed., 2005.
3. Python Essentials – Samuele Pedroni and Noel Pappin. O’Reilly, 2002.
4. Programming Perl – Larry Wall, Tom Christiansen and John Orwant, 3 rd Ed., O’Reilly, 2000.
NETWORK SECURITY AND CRYPTOGRAPHY
(PE - 4)
3 0 0 3
Pre-requisite: Nil
Course Objectives
1. Understand the basic requirement of in providing security in Networks.

2. To understand the threats/vulnerabilities in networks and countermeasures.
3. To understand Authentication functions with Message Authentication Codes and Hash
Functions.
4. To provide familiarity in Intrusion detection and protection measures.
Course Outcomes
1. Describe network security fundamental concepts and principles.

2. Encrypt and decrypt messages using standard block ciphers management.
3. Analyze key algorithms and identify their weaknesses.
4. Identify and assess different types of threats, malware, spyware, viruses, vulnerabilities and
then decide firewall design principles.
UNIT I
Security Services, Mechanisms and Attacks, A Model for Internetwork security, Classical
Techniques: Conventional Encryption model, Steganography, Classical Encryption Techniques.
Modern Techniques
Simplified DES, Block Cipher Principles, Data Encryption standard, Strength of DES, Block
Cipher Design Principles.
UNIT II
Encryption
Triple DES, International Data Encryption algorithm, Blowfish, RC5, Characteristics of
Advanced Symmetric block Ciphers. Placement of Encryption function, Traffic confidentiality,
Key distribution, Random Number Generation.
UNIT III
Public Key Cryptography
Principles, RSA Algorithm, Key Management, Diffie-Hellman Key exchange, Elliptic Curve
Cryptograpy.
Number Theory
Prime and Relatively prime numbers, Modular arithmetic, Fermat’s and Euler’s theorems,
Testing for primality, Euclid’s Algorithm, the Chinese remainder theorem, Discrete logarithms.
UNIT IV
Message Authentication and Hash Functions
Authentication requirements and functions, Message Authentication, Hash functions, Security of
Hash functions and MACs.
Hash and Mac Algorithms
MD-5, Message digest Algorithm, Secure Hash Algorithm.
Digital signatures and Authentication protocols: Digital signatures, Authentication Protocols,
Digital signature standards.
Authentication Applications
Kerberos, Electronic Mail Security: Pretty Good Privacy, SIME/MIME.
UNIT V
IP Security
Overview, Architecture, Authentication, Encapsulating Security Payload, Key Management.
Web Security: Web Security requirements, Secure sockets layer and Transport layer security,
Secure Electronic Transaction.
Intruders, Viruses and Worms
Intruders, Viruses and Related threats.
Fire Walls
Fire wall Design Principles, Trusted systems.
TEXT BOOKS
1. Cryptography and Network Security - Principles and Practice - William Stallings,

Pearson Education.
2. Network Security - The complete reference, Robert Bragg, Mark Rhodes, TMH,2004.
REFERENCES
1. Network Security Essentials (Applications and Standards) by William Stallings Pearson

Education.
2. Fundamentals of Network Security by Eric Maiwald (Dreamtech press).
3. Principles of Information Security, Whitman, Thomson.
4. Introduction to Cryptography, Buchmann, Springer.
BIO-MEDICAL ELECTRONICS
(PE-4)
3 0 0 3
Pre-requisite: NIL
Course Objectives
1. To Understand the application of the electronic systems in biological and medical
applications.
2. To explore the process of acquiring bio data from sensors and transducers.
3. To understand the recording, process and analysis of bio signals.
4. To expertise with measuring techniques of bio parameters.
Course Outcomes
1. Know the functionality of human anatomy and physiology.
2. Understand the practical limitations on the electronic components while handling bio
substances.
3. Understand the functionality of biomedical recorders.
4. Measure and analyse the biomedical parameters.
UNIT I
Anatomy and Physiology
Brief introduction to human physiology, Heart and Circulatory system, Central Nervous System,
Respiratory system, body temperature and reproduction system.
UNIT II
Bio-electrodes
Bio electric signal, Bio potential electrodes –External electrodes, internal electrodes, Bio
chemical electrodes, Electrode tissue interface, contact impedance.
UNIT III
Biomedical transducers
Typical signals from physiological parameters, Classification of Transducers-Pressure, force,
acceleration, flow, respiration sensor, Smart sensors, pulse sensor, temperature, potential,
dissolved ions and gases.
UNIT IV
Bio medical Recorders
Block diagram, working principle of VCG, PCG, ECG, EMG and EEG.
UNIT V
Measurements
Blood temperature, Pressure and flow Impedance plethysmography. Ultrasonic, X-ray, CT-Scan,
MRI, and nuclear imaging. Prostheses and aids: pacemakers, defibrillators, heart-lung machine,
artificial kidney, aids for the handicapped. Safety aspects.
TEXT BOOKS
1. Introduction to Bio Medical Electronics-Edward J. Perkistein, Howard Bj, USA
2. Handbook of Bio Medical Instrumentation, R S Khandpur, TMH, 2003.
REFERENCES
1. Review of Medical Physiology- W.F. Ganong,, 8th Asian Ed., Medical Publishers, 1977.
2. Medical Instrumentation- J.G. Websster, Ed., Houghton Mifflin, 1978.
3. Therapeutic Medical Devices - A.M. Cook and J.G. Webster, ed., Prentice-Hall, 1982.
4. Modern electronic Equipment by R S Khandpur, TMH
ELECTRONIC MEASUREMENTS AND INSTRUMENTATION
(PE - 4)

3 0 0 3
Pre-requisite: Basic Electrical and Electronics Engineering
Course Objectives
It provides an understanding of various measuring system functioning and metrics for

performance analysis.
1. Provides understanding of principle of operation, working of different electronic

instruments viz. signal generators, signal analyzers, recorders and measuring equipment.
2. Understanding the concepts of various measuring bridges and their balancing conditions.
3. Provides understanding of use of various measuring techniques for measurement of
different physical parameters using different classes of transducers.
Course Outcomes
1. Measure electrical parameters with different meters and understand the basic definition of
measuring parameters.
2. Use various types of signal generators, signal analyzers for generating and analyzing
various real-time signals.
3. Operate an Oscilloscope to measure various signals.
4. Measure various physical parameters by appropriately selecting the transducers.
UNIT I
Block Schematics of Measuring Systems
Performance Characteristics, Static Characteristics, Accuracy, Precision, Resolution, Types of
Errors, Gaussian Error, Root Sum Squares formula, Dynamic Characteristics, Repeatability,
Reproducibility, Fidelity, Lag ;Measuring Instruments: DC Voltmeters, D’ Arsonval Movement,
DC Current Meters, AC Voltmeters and Current Meters, Ohmmeters, Multimeters, Meter
Protection, Extension of Range, True RMS Responding Voltmeters, Specifications of
Instruments.
UNIT II
Signal Analyzers
AF, HF Wave Analyzers, Harmonic Distortion, Heterodyne wave Analyzers, Spectrum
Analyzers, Power Analyzers, Capacitance-Voltage Meters, Oscillators. Signal Generators: AF,
RF Signal Generators, Sweep Frequency Generators, Pulse and Square wave Generators,
Function Generators, Arbitrary Waveform Generator, Video Signal Generators, and
Specifications
UNIT III
Oscilloscopes
CRT, Block Schematic of CRO, Time Base Circuits, Lissajous Figures, CRO Probes, High
Frequency CRO Considerations, Delay lines, Applications: Measurement of Time, Period and
Frequency Specifications.
Special Purpose Oscilloscopes
Dual Trace, Dual Beam CROs, Sampling Oscilloscopes, Storage Oscilloscopes, Digital Storage
CROs.
UNIT IV
Transducers
Classification, Strain Gauges, Bounded, unbounded; Force and Displacement Transducers,
Resistance Thermometers, Hotwire Anemometers, LVDT, Thermocouples, Synchros, Special
Resistance Thermometers, Digital Temperature sensing system, Piezoelectric Transducers,
Variable Capacitance Transducers, Magneto Strictive Transducers, gyroscopes, accelerometers.
UNIT V
Bridges
Wheat Stone Bridge, Kelvin Bridge, and Maxwell Bridge.
Measurement of Physical Parameters
Flow Measurement, Displacement Meters, Liquid level Measurement, Measurement of
Humidity and Moisture, Velocity, Force, Pressure – High Pressure, Vacuum level, Temperature -
Measurements, Data Acquisition Systems.
TEXT BOOKS
1. Electrical And Electronic Measurement And Measuring Instruments – A K Sawhney,

Dhanpat Rai & Sons, 2013.
2. Electronic Instrumentation: H.S.Kalsi – TMH, 2 nd Ed., 2004.
REFERENCES
1. Modern Electronic Instrumentation and Measurement Techniques: A.D. Helbincs,

W.D. Cooper: PHI 5th Ed., 2003.
2. Electronic Instrumentation and Measurements – David A. Bell, Oxford Univ. Press,
1997.
3. Industrial Instrumentation: T.R. Padmanabham Springer 2009.
4. Electronic Measurements and Instrumentation – K. Lal Kishore, Pearson Education
2010.
ELECTRONIC SENSORS
(OE - 2)
IV Year B. Tech. ECE I Semester L T P C
3 0 0 3
Course Objectives
1. Learn the characteristics of sensors.

2. Know the working of Electromechanical, Thermal, Magnetic and radiation sensors.
3. Understand the concepts of Electro analytic and smart sensors.
4. Able to use sensors in different applications.
Course Outcomes
1. Learn about sensor Principle, Classification and Characterization.

2. Explore the working of Electromechanical, Thermal, Magnetic, radiation and Electro
analytic sensors.
3. Understand the basic concepts of Smart Sensors.
4. Design a system with sensors.
UNIT I
Sensors / Transducers
Principles, Classification, Parameters, Characteristics, Environmental Parameters (EP),
Characterization
Electromechanical Sensors
Introduction, Resistive Potentiometer, Strain Gauge, Resistance Strain Gauge, Semiconductor
Strain Gauges -Inductive Sensors: Sensitivity and Linearity of the Sensor –Types-Capacitive
Sensors: Electrostatic Transducer, Force/Stress Sensors Using Quartz Resonators, Ultrasonic
Sensors.
UNIT II
Thermal Sensors
Introduction, Gas thermometric Sensors, Thermal Expansion Type Thermometric Sensors,
Acoustic Temperature Sensor, Dielectric Constant and Refractive Index thermo sensors, Helium
Low Temperature Thermometer, Nuclear Thermometer, Magnetic Thermometer, Resistance
Change Type Thermometric Sensors, Thermo EMF Sensors, Junction Semiconductor Types,
Thermal Radiation Sensors, Quartz Crystal Thermoelectric Sensors, NQR Thermometry,
Spectroscopic Thermometry, Noise Thermometry, Heat Flux Sensors.
UNIT III
Magnetic sensors
Introduction, Sensors and the Principles Behind, Magneto-resistive Sensors, Anisotropic
Magneto resistive Sensing, Semiconductor Magneto resistors, Hall Effect and Sensors
,Inductance and Eddy Current Sensors, Angular/Rotary Movement Transducers, Synchros.
UNIT IV
Radiation Sensors
Introduction ,Basic Characteristics,Types of Photo resistors/ Photo detectors, X-ray and Nuclear
Radiation Sensors, Fibre Optic Sensors.
Electro analytical Sensors
The Electrochemical Cell, The Cell Potential - Standard Hydrogen Electrode (SHE),Liquid
Junction and Other Potentials, Polarization, Concentration Polarization, Reference Electrodes,
Sensor Electrodes, Electro ceramics in Gas Media.
UNIT V
Smart Sensors
Introduction, Primary Sensors, Excitation, Amplification, Filters, Converters, Compensation,
Information Coding/Processing - Data Communication, Standards for Smart Sensor Interface, the
Automation
Sensors Applications
Introduction, On-board Automobile Sensors (Automotive Sensors), Home Appliance Sensors,
Aerospace Sensors, Sensors for Manufacturing –Sensors for environmental Monitoring
TEXT BOOKS
1. “Sensors and Transducers - D. Patranabis” –PHI Learning Private Limited., 2003.

2. Introduction to sensors- John veteline, aravind raghu, CRC press,2011
REFERENCES
1. Sensors and Actuators , D. Patranabis ,2nd Ed., PHI, 2013.

2. Make sensors: Terokarvinen, kemo, karvinen and villey valtokari, 1st edition, maker media,
2014.
3. Sensors handbook- Sabrie soloman, 2nd Ed. TMH,2009.
MICROWAVE ENGINEERING LABORATORY

0 0 2 1
LIST OF EXPERIMENTS
To setup Microwave Bench for any 10 of the following Experiments and obtain relevant
measurement/characteristics.
1. Reflex Klystron Characteristics.

2. Gunn Diode Characteristics.
3. Magic T Characteristics.
4. Circulator Characteristics.
5. Attenuation measurement.
6. Directional coupler Characteristics.
7. Scattering parameters of wave guide components.
8. Frequency measurement.
9. Direct Frequency measurement.
10. Slot Section Frequency measurement.
11. Impedance measurement.
12. VSWR measurement.
13. Characterization of Directional couplers/ T Junctions using Vector Network Analyzer
14. Characterization of Horn Antenna using Vector Network Analyzer
MANAGEMENT FUNDAMENTALS FOR ENGINEERS

3 0 0 3
Course Objective: To understand the Management Concepts, applications of Concepts in

Practical aspects of business and development of Managerial Skills for Engineers.
Course Outcome: The students understand the significance of Management in their Profession.
The various Management Functions like Planning, Organizing, Staffing, Leading, Motivation
and Control aspects are learnt in this course. The students can explore the Management Practices
in their domain area.
Unit- I Introduction to Management: Evolution of Management, Nature & Scope-Functions of

Management-Role of Manager-levels of Management-Managerial Skills - Challenges-Planning-
Planning Process-Types of Plans-MBO
Unit-II Organization Structure & HRM: Organization Design-Organizational Structure-

Departmentation–Delegation-Centralization - Decentralization-Recentralization-Organizational
Culture- Organizational climate- Organizational change
Human Resource Management-HR Planning - Recruitment & Selection - Training &
Development-Performance appraisal - Job satisfaction-Stress Management Practices
Unit –III Operation Management: Introduction to Operations Management-Principles and

Types of Plant layout-Methods of production (Job Batch and Mass production) - Method study
and Work measurement-Quality Management - TQM-Six sigma - Deming’s Contribution to
Quality - Inventory Management – EOQ - ABC Analysis - JIT System-Business Process Re-
engineering(BPR)
Unit-IV Marketing Management: Introduction to Marketing-Functions of Marketing-

Marketing vs. Selling-Marketing Mix - Marketing Strategies - Product Life Cycle - Market
Segmentation -Types of Marketing - Direct Marketing-Network Marketing - Digital Marketing-
Channels of Distribution - Supply Chain Management (SCM)
Unit-V Project Management: Introduction to Project Management-steps in Project

Management - Project Planning - Project Life Cycle-Network Analysis-Program Evaluation &
Review Technique(PERT)-Critical Path Method(CPM) - Project Cost Analysis - Project
Crashing - Project Information Systems
Suggested Readings:
1. Management Essentials, Andrew DuBrin, 9e, Cengage Learning, 2012.
2. Fundamentals of Management, Stephen P.Robbins, Pearson Education, 2009.
3. Essentials of Management, Koontz Kleihrich, Tata Mc - Graw Hill.
4. Management Fundamentals, Robert N Lussier, 5e, Cengage Learning, 2013.
5. Industrial Engineering and Management: Including Production Management, T.R.Banga,
S.C Sharma , Khanna Publishers.
RADAR SYSTEMS
(PE -5)
IV Year B.Tech. ECE II Semester L T P C
3 0 0 3
Pre-requisite - Analog and Digital Communications
Course Objectives
1. To explore the concepts of radar and its frequency bands.

2. To understand Doppler effect and get acquainted with the working principles of CW radar,
FM-CW radar.
3. To impart the knowledge of functioning of MTI and Tracking Radars.
4. To explain the deigning of a Matched Filter in radar receivers.
Course Outcomes
1. Derive the complete radar range equation.

2. Understand the need and functioning of CW, FM-CW and MTI radars.
3. Known various Tracking methods.
4. Derive the matched filter response characteristics for radar receivers.
UNIT I
Basics of Radar
Maximum Unambiguous Range, Simple form of Radar Equation, Radar Block Diagram and
Operation, Radar Frequencies and Applications. Prediction of Range Performance, Minimum
Detectable Signal, Receiver Noise, Modified Radar Range Equation.
Radar Equation
SNR, Envelope Detector – False Alarm Time and Probability, Integration of Radar Pulses, Radar
Cross Section of Targets , Transmitter Power, PRF and Range Ambiguities, System Losses
(qualitative treatment).
UNIT II
CW and Frequency Modulated Radar
Doppler Effect, CW Radar – Block Diagram, Isolation between Transmitter and Receiver, Non-
zero IF Receiver, Receiver Bandwidth Requirements, Applications of CW radar.
FM-CW Radar
Range and Doppler Measurement, Block Diagram and Characteristics, FM-CW altimeter.
UNIT III
MTI and Pulse Doppler Radar
Principle, MTI Radar - Power Amplifier Transmitter and Power Oscillator Transmitter, Delay
Line Cancellers – Filter Characteristics, Blind Speeds, Double Cancellation, Staggered PRFs.
Range Gated Doppler Filters. MTI Radar Parameters, Limitations to MTI Performance, MTI
versus Pulse Doppler Radar.
UNIT IV
Tracking Radar
Tracking with Radar, Sequential Lobing, Conical Scan, Mono pulse Tracking Radar – Amplitude
Comparison Mono pulse (one- and two- coordinates), Phase Comparison Mono pulse, Tracking
in Range, Acquisition and Scanning Patterns, Comparison of Trackers.
UNIT V
Detection of Radar Signals in Noise
Matched Filter Receiver – Response Characteristics and Derivation, Correlation Function and
Cross-correlation Receiver, Efficiency of Non-matched Filters, Matched Filter with Non-white
Noise.
Radar Receivers
Noise Figure and Noise Temperature, Displays – types. Duplexers – Branch type and Balanced
type, Circulators as Duplexers. Introduction to Phased Array Antennas – Basic Concepts,
Radiation Pattern, Beam Steering and Beam Width changes, Applications, Advantages and
Limitations.
TEXT BOOKS
1. Introduction to Radar Systems – Merrill I. Skolnik, TMH Special Indian Edition, 2 ndEd.,
2007.
REFERENCES
1. Radar: Principles, Technology, Applications – Byron Edde, Pearson Education, 2004.

2. Radar Principles – Peebles, Jr., P.Z., Wiley, New York, 1998.
3. Principles of Modern Radar: Basic Principles – Mark A. Richards, James A. Scheer, William
A. Holm, Yesdee, 2013.
4. Radar Handbook - Merrill I. Skolnik, 3rd Ed., McGrawHill Education, 2008.
ELECTRO MAGNETIC INTERFERNCE & ELECTROMAGNETIC COMPATIBILITY
(EMI / EMC)
(PE - 5)
3 0 0 3
Pre-requisite - Electromagnetic Theory and Transmission Lines
Course Objectives
1. To introduce important system concepts such as Electromagnetic interference and

Electromagnetic compatibility (EMI&EMC).
2. To familiarize with unavoidable and naturally happening sources of EMI and problems to
ensure EMC.
3. To study various techniques to reduce EMI from systems and to improve EMC of
electronic systems.
Course Outcomes
Upon completion of this course, the student will be able to
1. Gain basic knowledge of problems associated with EMI and EMC from electronic
circuits and systems.
2. Analyze various sources of EMI and various possibilities to provide EMC.
3. Understand and analyze possible EMI prevention techniques such as grounding,
shielding, filtering and use of proper coupling mechanisms to improve compatibility of
electronic circuits and systems in a given electromagnetic environment.
UNIT I
Sources of EMI
Definition of EMI and EMC, Classification, Natural and Man-Made EMI Sources, Switching
Transients, Electrostatic Discharge, Nuclear Electromagnetic Pulse and High Power
Electromagnetics.
EMI/EMC Standards
Introduction, Standards for EMI/EMC – MIL –STD 461/462 – IEEE/ANSI Standards –
CISPR/IEC, Standards – FCC Regulations.
UNIT II
EMI Coupling Modes
Penetration: Introduction, Shielding Theory - Shielding Effectiveness, The Circuit Approach,
The Wave Approach, Aperture Theory, Calculation of Effectiveness of a Conducting Box with
an Aperture, Introduction to Propagation and Cross Talk – Introduction, Basic Principles,
Determination of EM Field from Transmission Lines.
UNIT III
EMI Controlling Techniques-1
Grounding, Principles and Practice of Earthing, Precautions in Earthing, Measurements of
Ground Resistance, System Grounding for EMC, Cable Shielding Grounding.
Shielding, Theory and Effectiveness, Materials, Integrity at Discontinuities, Conductive
Coatings, Cable Shielding, Effectiveness Measurements, Electrical Bonding.
UNIT IV
EMI Controlling Techniques-2
Characteristics and Types of Filters – Impedance Mismatch, Lumped Element Low-Pass, High-
Pass, Band-Pass and Band-Reject Filters, Power Line Filter Design - Common Mode,
Differential Mode, Combined CM and DM Filters, Design Example.
EMC Gaskets – Knitted Wire-Mesh Gaskets, Wire-Screen Gaskets, Oriented Wire Mesh,
Conductive Elastomer, Transparent Conductive Windows, Conductive Adhesive, Conductive
Grease, Conductive Coatings, Isolation Transformers, Opto-Isolators.
UNIT V
EMI Measurements
Introduction to Open Area Test Site Measurements – Measurement Precautions – Open Area
Test Site – Terrain Roughness – NSA – Measurement of Test Site Imperfections – Antenna
Factor Measurement – Measurement Errors.Radiated Interference Measurements – Anechoic
Chamber – TEM Cell – Reverberating Chamber – Ghz TEM Cell – Comparison of Test
Facilities – Measurement UncertaintiesConducted Interference Measurements – Characterization
– Conducted EM Noise on Power Supply Lines – Conducted EMI from Equipment – Immunity –
Detectors and Measurement – Pulsed EMI Immunity – Electrostatic Discharge.
TEXT BOOKS
1. Engineering Electromagnetic Compatibility – V. Prasad Kodali – 2/e – IEEE Press – Wiley

India Pvt. Ltd – 2001.
2. Principles and Techniques of Electromagnetic Compatibility – Christos Christopoulos – 2/e –
CRC Press (Taylor & Francis Group) – 2007.
REFERENCES
1. Introduction to Electromagnetic Compatibility – Clayton R.Paul – John Wiley & Sons, 1992.
2. Electromagnetic Compatibility of Integrated Circuits – Techniques for Low Emission and
Susceptibility – Edited by Sonia Ben Dhia, Mohamed Ramdani and Etienne Sicard –
Springer, 2006.
3. EMI reduction in Electronic Systems – Mills – J.P – Prentice Hall Inc.
4. Noise Reduction in Electronic Systems – Henry W.Ott, 2nd Edition, Wiley Interscience,
1988.
OPTICAL COMMUNICATIONS
(PE - 5)
3 0 0 3
Prerequisite: Analog Communications and Digital Communications
Course Objectives
The objectives of the course are:
1. To realize the significance of optical fiber communications.
2. To understand the construction and characteristics of optical fiber cable.
3. To develop the knowledge of optical signal sources, detectors and coupling into optical
fibers.
4. To understand the design of optical systems and WDM.
Course Outcomes
At the end of the course, the student will be able to:
1. Understand and analyze the constructional parameters of optical fibers.
2. Be able to design an optical system.
3. Estimate the losses due to attenuation, absorption, scattering and bending.
4. Compare various optical detectors and choose suitable one for different applications
UNIT I
Overview of Optical Fiber Communication: - Historical development, The general system,
Advantages of Optical Fiber Communications, Optical Fiber Wave Guides- Introduction, Ray
Theory Transmission, Total Internal Reflection, Acceptance Angle, Numerical Aperture, Skew
Rays, Cylindrical Fibers- Modes, Vnumber, Mode Coupling, Step Index Fibers, Graded Index
Fibers.
Single Mode Fibers- Cut Off Wavelength, Mode Field Diameter, Effective Refractive Index,
Fiber Materials Glass, Halide, Active Glass, Chalgenide Glass, Plastic Optical Fibers.
UNIT II
Signal Distortion in Optical Fibers: Attenuation, Absorption, Scattering and Bending Losses,
Core and Cladding Losses, Information Capacity Determination, Group Delay, Types of
Dispersion - Material Dispersion, Wave-Guide Dispersion, Polarization Mode Dispersion,
Intermodal Dispersion, Pulse Broadening, Optical Fiber Connectors- Connector Types, Single
Mode Fiber Connectors, Connector Return Loss.
UNIT III
Fiber Splicing: Splicing Techniques, Splicing Single Mode Fibers, Fiber Alignment and Joint
Loss- Multimode Fiber Joints, Single Mode Fiber Joints.
Optical Sources- LEDs, Structures, Materials, Quantum Efficiency, Power, Modulation, Power
Bandwidth Product, Injection Laser Diodes- Modes, Threshold Conditions, External Quantum
Efficiency, Laser Diode Rate Equations, Resonant Frequencies, Reliability of LED & ILD.
Source to Fiber Power Launching: - Output Patterns, Power Coupling, Power Launching,
Equilibrium Numerical Aperture, Laser Diode to Fiber Coupling.
UNIT IV
Optical Detectors: Physical Principles of PIN and APD, Detector Response Time, Temperature
Effect on Avalanche Gain, Comparison of Photo Detectors, Optical Receiver Operation-
Fundamental Receiver Operation, Digital Signal Transmission, Error Sources, Receiver
Configuration, Digital Receiver Performance, Probability of Error, Quantum Limit, Analog
Receivers.
UNIT V
Optical System Design: Considerations, Component Choice, Multiplexing, Point-to- Point
Links, System Considerations, Link Power Budget with Examples, Overall Fiber Dispersion in
Multi-Mode and Single Mode Fibers, Rise Time Budget with Examples.
Transmission Distance, Line Coding in Optical Links, WDM, Necessity, Principles, Types of
WDM, Measurement of Attenuation and Dispersion, Eye Pattern.
TEXT BOOKS
1. Optical Fiber Communications – Gerd Keiser, TMH, 4th Edition, 2008.

2. Optical Fiber Communications – John M. Senior, Pearson Education, 3 rd Edition, 2009.
REFERENCES
1. Fiber Optic Communications – D.K. Mynbaev , S.C. Gupta and Lowell L. Scheiner,
Pearson Education, 2005.
2. Text Book on Optical Fibre Communication and its Applications – S.C.Gupta, PHI, 2005.
3. Fiber Optic Communication Systems – Govind P. Agarwal , John Wiley, 3rd Ediition,
2004.
4. Introduction to Fiber Optics by Donald J.Sterling Jr. – Cengage learning, 2004.
5. Optical Communication Systems – John Gowar, 2 nd Edition, PHI, 2001.
SATELLITE COMMUNICATIONS
(PE-6)
3 0 0 3
Pre-requisite Analog and Digital Communications
Course Objectives
1. To acquired foundation in orbital mechanics and launch vehicles for the satellites.
2. To provide basic knowledge of link design of satellite.
3. To understand multiple access systems and earth station technology.
4. To understand the concepts of satellite navigation and GPS.
Course Outcomes
1. Understand basic concepts and frequency allocations for satellite communication, orbital
mechanics and launch vehicles.
2. Envision the satellite sub systems and design satellite links for specified C/N.
3. Understand the various multiple access techniques for satellite communication systems
and earth station technologies.
4. Explore the LEO, GEO Stationary Satellite Systems and satellite navigation.
UNIT I
Introduction
Origin of Satellite Communications, Historical Back-ground, Basic Concepts of Satellite
Communications, Frequency Allocations for Satellite Services, Applications, Future Trends of
Satellite Communications.
Orbital Mechanics and Launchers

Orbital Mechanics, Look Angle determination, Orbital Perturbations, Orbit determination,
Launches and Launch vehicles, Orbital Effects in Communication Systems Performance.
UNIT II
Satellite Subsystems
Attitude and Orbit Control System, Telemetry, Tracking, Command And Monitoring, Power
Systems, Communication Subsystems, Satellite Antennas, Equipment Reliability and Space
Qualification.
UNIT III
Satellite Link Design
Basic Transmission Theory, System Noise Temperature and G/T Ratio, Design of Down Links,
Up Link Design, Design Of Satellite Links For Specified C/N, System Design Examples.
Multiple Access
Frequency Division Multiple Access (FDMA), Inter modulation, Calculation of C/N, Time
Division Multiple Access (TDMA), Frame Structure, Examples, Satellite Switched TDMA
Onboard Processing, DAMA, Code Division Multiple Access (CDMA), Spread Spectrum
Transmission and Reception.
UNIT IV
Earth Station Technology
Introduction, Transmitters, Receivers, Antennas, Tracking Systems, Terrestrial Interface,
Primary Power Test Methods.
UNIT V
Low Earth Orbit and Geo-Stationary Satellite Systems
Orbit Considerations, Coverage and Frequency Consideration, Delay & Throughput
Considerations, System Considerations, Operational NGSO Constellation Designs.
Satellite Navigation & Global Positioning System

Radio and Satellite Navigation, GPS Position Location Principles, GPS Receivers and Codes,
Satellite Signal Acquisition, GPS Navigation Message, GPS Signal Levels, GPS Receiver
Operation, GPS C/A Code Accuracy, Differential GPS.
TEXT BOOKS
1. Satellite Communications – Timothy Pratt, Charles Bostian and Jeremy Allnutt, WSE,
Wiley Publications, 2nd Ed., 2003.
2. Satellite Communications Engineering – Wilbur L. Pritchard, Robert A Nelson and Henri
G.Suyderhoud, 2nd Ed., Pearson Publications, 2003.
REFERENCES
1. Satellite Communications: Design Principles – M. Richharia, BS Publications, 2 nd Ed.,

2003.
2. Satellite Communication - D.C Agarwal, Khanna Publications, 5 th Ed.
3. Fundamentals of Satellite Communications – K.N. Raja Rao, PHI, 2004
4. Satellite Communications – Dennis Roddy, McGraw Hill, 4 th Ed., 2009.
NANO MATERIALS AND TECHNOLOGY
(PE – 6)

3 0 0 3
Course Objectives
1. This Course is intended to cover the basics of Nano Materials and Technology
2. To know the scaling of the devices to smaller and smaller sizes which has provided the
basis for growth.
3. To understand the physical and technological processes for Nano devices.
Course Outcomes
After completion of the course the student will be able to

1. Understand the basic concepts of Nano materials and Nano technology.
2. Familiar with fabrication process of Nano Technology.
3. Known the scaling and role of electrons in solids and Nano Structures.
4. Known the structures of Nano Devices.
UNIT I
Nanotechnology
Origin of Nanotechnology, Nano Scale, Surface to Volume Ratio, Quantum Confinement,
Bottom-up Fabrication: Sol-Gel, Precipitation, Combustion Methods; Top-Down Fabrication:
Chemical Vapor Deposition, Physical Vapor Deposition.
UNIT II
Nano Materials
Semiconductors, Crystal lattices: bonding in crystals, Electron energy bonds, Semiconductor
hetero-structures, Lattice-matched and pseudomorphic hetero-structures, Organic
semiconductors, Carbon Nano materials: Nano Tubes and fullerenes.
UNIT III
Nanostructures
Bulk crystal and hetero-structure growth, Nanolithography, etching and other means for
fabrication of Nanostructures and Nano devices, Techniques for characterization of
Nanostructures, spontaneous formation and ordering of nanostructures, Clusters and Nano
crystals, Methods of Nano tube growth, Chemical and biological methods for Nano scale
fabrication, Fabrication of Nano electro-mechanical systems.
UNIT IV
Electron transport in semiconductors and nanostructures
Time and length scales of the electrons in solids, Statistics of the electrons in solids and
nanostructure, density of states of electrons in nanostructures, Electron transport in
nanostructures, Electrons in quantum - wells, wires and dots.
UNIT V
Nanostructure devices
Resonant-tunneling diode, Field-effect transistors, Single-electron-transfer devices, Potential-
effect transistors, Light-emitting diodes and lasers, Nano-electro-mechanical system devices,
Quantum-dot cellular automata.
TEXT BOOKS
1. Introduction to Nano electronics: Science, Nanotechnology, Engineering and

Applications, Vladimir V, Mitin, Viatcheslav A. Kochelap and Michael A. Stroscio,
Cambridge University Press.
REFERENCES
1. Fundamentals of Nano electronics by George W Hanson, Pearson Publications, 2008.

2. Introduction to Nanotechnology by Charles P Poole Jr and Frank J Owens Wiley.
TELEVISION ENGINEERING
(PE - 6)

3 0 0 3
Pre-requisite: Nil
Course Objectives
1. Study the different camera and picture tubes.

2. Know about various standard TV channels.
3. Study about TV receiver, sync separation, detector etc.,
4. Study about color signal encoding, decoding and receiver.
Course Outcomes
1. Known working principle and construction of various camera tubes.

2. Understand the concept of TV transmission and reception.
3. Understand the working of color TV.
4. Learn the basics of various digital TV systems.
UNIT I
Introduction
TV transmitter and receivers, synchronization. Geometric form and aspect ratio, image
continuity, interlaced scanning, picture resolution, Composite video signal, TV standards.
Camera tubes : Image Orthicon, Plumbicon, Vidicon, Silicon Diode Array Vidicon, Comparison
of camera tubes, Monochrome TV camera,
TV Signal Transmission and Propagation

Picture Signal transmission, positive and negative modulation, VSB transmission, sound signal
transmission, standard channel BW,TV transmitter, TV signal propagation, interference, TV
broadcast channels, TV transmission Antennas.
UNIT II
Monochrome TV Receiver
RF tuner, IF subsystem, video amplifier, sound section, sync separation and processing,
deflection circuits, scanning circuits, AGC, noise cancellation, video and inter carrier sound
signal detection, vision IF subsystem of Black and White receivers, Receiver sound system: FM
detection, FM Sound detectors, and typical applications.
UNIT III
Sync Separation and Detection
TV Receiver Tuners, Tuner operation, VHF and UHF tuners, digital tuning techniques, remote
control of receiver functions. Sync Separation, AFC and Deflection Oscillators: Synchronous
separation, k noise in sync pulses, separation of frame and line sync pulses. AFC, single ended
AFC circuit, Deflection Oscillators, deflection drive ICs, Receiver Antennas, Picture Tubes.
UNIT IV
Color Television
Color signal generation, additive color mixing, video signals for colors, color difference signals,
encoding, Perception of brightness and colors luminance signal, Encoding of color difference
signals, formation of chrominance signals, color cameras, Color picture tubes.
Color Signal Encoding and Decoding

NTSC color system, PAL color system, PAL encoder, PAL-D Decoder, chrome signal
amplifiers, separation of U and V signals, color burst separation, Burst phase discriminator, ACC
amplifier, Reference oscillator, Indent and color killer circuits, U& V demodulators.
UNIT V
Color Receiver
Introduction to color receiver, Electron tuners, IF subsystem, Y-signal channel, Chroma decoder,
Separation of U & V Color, Phasors, synchronous demodulators, Sub carrier generation, raster
circuits.
Digital TV
Introduction to Digital TV, Digital Satellite TV, Direct to Home Satellite TV, Digital TV
Transmitter, Digital TV Receiver, Digital Terrestrial TV, LCD TV, LED TV, CCD Image
Sensors, HDTV.
TEXT BOOKS
1. Monochrome and Color TV- R.R. Gulati, New Age International Publication, 2002.
2. Television and Video Engineering- A.M.Dhake, 2 nd Ed., McGraw Hill, 2017.
REFERENCES
1. Color Television Theory and Practice-S.P.Bali, TMH, 1994.

2. Basic Television and Video Systems-B.Grob and C.E.Herndon, McGraw Hill, 1999.
3. Modern Television Practice – Principles, Technology and Service- R.R.Gallatin, New
Age International Publication, 2002.
PRINCIPLES OF COMMUNICATIONS
(OE- 3)
3 0 0 3
Pre-requisite: Nil
Course Objectives
1. Basic understanding of all communication systems

2. Introduce the basic definitions of different modulation techniques.
3. Known about satellite and optical communications.
4. Learn the fundamentals of wireless technologies.
Course Outcomes
1. Understand the need of modulation and distinguish various modulation techniques.

2. Known the communication concepts using satellite and optical fiber.
3. Have a basic understanding of cellular, mobile and telephone communication systems.
4. Known fundamentals of wireless networks.
UNIT I
Simple description on Modulation
Need for Modulation, Electromagnetic spectrum, Analog Modulation-AM, FM, Pulse
Modulation-PAM, PWM, PCM, Digital Modulation Techniques-ASK, FSK, PSK, QPSK
modulation and demodulation schemes.
UNIT II Satellite Communication

Satellite Orbits, Ground Stations, Satellite Applications, basics of Global Positioning systems.
UNIT III
Optical Communication
Propagation mechanism, Types of optical fiber, LED source, PIN detector
UNIT IV
Telecommunication Systems
Telephone system, Paging systems, Internet Telephony.
Networking and Local Area Networks

Network fundamentals, Ethernet LANs, Token Ring LAN.
UNIT V
Cellular and Mobile Communications
Basic concepts of Cellular telephone systems, Evolution and standard - AMPS, GSM, CDMA,
and WCDMA.
Wireless Technologies
Fundamentals - Wireless LANs, PANs and MANs.
TEXT BOOKS
1. Principles of Electronic Communication Systems, Louis E. Frenzel, 3e, McGraw Hill
publications, 2008.
2. Kennedy, Davis, Electronic Communications systems, 4e, TMH, 1999.
REFERENCES
1. Tarmo Anttalainen, Introduction to Telecommunications Network Engineering, Artech
House Telecommunications Library.
2. Theodore Rappaport, Wireless Communications-Principles and practice, Printice Hall,
2002.
3. Roger L. Freeman, Fundamentals of Telecommunications, 2e, Wiley publications.
4. Wayne Tomasi, Introduction to data communications and networking, Pearson
Education, 2005.

ELECTRONICSANDCOMMUNICATIONENGINEERING

Uploaded by

Copyright:

Available Formats

ELECTRONICSANDCOMMUNICATIONENGINEERING

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

ELECTRONICSANDCOMMUNICATIONENGINEERING

Uploaded by

Copyright:

Available Formats

J.N.T.U.

H COLLEGE OF ENGINEERING HYDERABAD

S.No. Course Subject L T P Credits

S.No. Course Subject L T P Credits

III YEAR I SEMESTER

S.No. Course Subject L T P Credits

III YEAR II SEMESTER

S.No. Course Subject L T P Credits

Summer between III & IV Year: Industry Oriented Mini Project

S.No. Course Subject L T P Credits

S.No. Course Subject L T P Credits

I Year B.Tech. I-Sem L T P C

Pre-requisites: Mathematical Knowledge of 12th / intermediate level

UNIT-I: MATRICES Types of Matrices, Symmetric; Hermitian ; Skew-symmetric; Skew-

UNIT-III: SEQUENCES& SERIES Sequence: Definition of a Sequence, limit; Convergent,

UNIT-V: MULTIVARIABLE CALCULUS (PARTIAL DIFFERENTIATION AND

I Year B.Tech. I-Sem L T P C

UNIT-IV: ELECTRICAL MACHINES Generation of rotating magnetic fields, Construction

UNIT-V: ELECTRICAL INSTALLATIONS Components of LT Switchgear: Switch Fuse Unit

I Year B.Tech. I-Sem L T P C

UNIT-I: MOLECULAR STRUCTURE AND THEORIES OF BONDING Atomic and

UNIT-II: WATER AND ITS TREATMENT Introduction – hardness of water – Causes of

UNIT-III: ELECTROCHEMISTRY AND CORROSION Electro chemical cells – electrode

UNIT-IV: STEREOCHEMISTRY, REACTION MECHANISM AND SYNTHESIS OF DRUG

UNIT-V: SPECTROSCOPIC TECHNIQUES AND APPLICATIONS Principles of electronic

I Year B.Tech. I-Sem L T P C

LEARNING OBJECTIVES : The course will help students to

COURSE OUTCOMES : Students should be able to

I Year B.Tech. I-Sem L T P C

1. Verification of Ohms Law

I Year B.Tech. I-Sem L T P C

Listening Skills Objectives

ICS Lab: 1. Introduction to Interview Skills. 2. Common errors in speaking.

Pre-requisites: Practical skill

I Year B.Tech. II-Sem L T P C

I Year B.Tech. II-Sem L T P C

UNIT-I: QUANTUM MECHANICS Introduction to quantum physics, Black body radiation,

UNIT-II: SEMICONDUCTOR PHYSICS Intrinsic and extrinsic semiconductors: Estimation

UNIT-III: OPTOELECTRONICS Radiative, Non-radiative transitions and recombination

I Year B.Tech. II-Sem L T P C

UNIT-I: INTRODUCTION TO COMPUTERS – Computer Systems, Computing

UNIT-III: ARRAYS AND STRINGS – Concepts, using arrays in C, inter function

UNIT-IV: POINTERS – Introduction (Basic Concepts), Pointers for inter function

I Year B.Tech. II-Sem L T P C

UNIT-I: INTRODUCTION TO ENGINEERING DRAWING Principles of Engineering

UNIT-II: ORTHOGRAPHIC PROJECTIONS: Principles of Orthographic Projections –

UNIT-III: Projections of Regular Solids – Auxiliary Views.

UNIT-V: ISOMETRIC PROJECTIONS : Principles of Isometric Projection – Isometric Scale

1. To provide an experimental foundation for the theoretical concepts introduced in the

Course Outcomes: At the end of the course students will be able:

I Year B.Tech. II-Sem L T P C

II Year B.Tech. ECE I Semester L T P C

1. To introduce components such as diodes, BJTs and FETs.

Upon completion of the Course, the students will be able to:

1. Electronic Devices and Circuits - Jacob Millman, McGraw Hill Education.

1. The Art of Electrionics , Horowitz, 3rdEdition Cambridge University Press, 2018

II Year B.Tech. ECE I Semester L T P C

1. To understand the basic concepts on RLC circuits.

Upon successful completion of the course, students will be able to:

1. Analyze the Steady and transient state behaviour of RLC Circuits.