Scribd
Upload
68 views1 page

PipeCalc - Friction Loss PDF

The document provides details on calculating friction loss for a water pumping system with two parallel pumps. It includes the pumped fluid properties, static head, layout as a wet well installation, and flow rate. The Colebrook-White model is used for the calculation. Pipe dimensions, lengths, fittings, and velocities are listed for individual discharge pipes and a common discharge pipe. Total friction head losses are calculated to be 0.5405m and 7.786m respectively. With a total static head of 6m, the total required head is calculated as 14.33m.

Uploaded by

N_Locus
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
68 views1 page

PipeCalc - Friction Loss PDF

The document provides details on calculating friction loss for a water pumping system with two parallel pumps. It includes the pumped fluid properties, static head, layout as a wet well installation, and flow rate. The Colebrook-White model is used for the calculation. Pipe dimensions, lengths, fittings, and velocities are listed for individual discharge pipes and a common discharge pipe. Total friction head losses are calculated to be 0.5405m and 7.786m respectively. With a total static head of 6m, the total required head is calculated as 14.33m.

Uploaded by

N_Locus
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Friction loss calculation

Pumped fluid Static head Layout


Water, pure 6 Wet well installation

Flow Number of pumps Calculation model


80 l/s 2 Colebrook-White

Viscosity Nature of system


1.569 mm²/s Single pumps as parallel circuit

Type Ø ? or L Qty. v k ΔH
(mm) (m/s) (mm) (m)
Ø = Diameter v = Velocity k = Pipe roughness ΔH = Head loss
Individual discharge side pipe - Plastic / PE100 (HDPE) PE 4710
SDR 17 (PN 10) / DN 200 (200x11,9 mm) / DIN 8074/75 /EN 13244
Pipe length 176.2 8m 1 1.64 0.01 0.1016
Elbows 176.2 0.6 2 1.64 0.08229
Inlet 176.2 1 1 1.64 0.1372
Non-return valves 176.2 0.9 1 1.64 0.1234
T-piece 176.2 0.4 1 1.64 0.05486
VALVE 176.2 0.3 1 1.64 0.04115
Total friction head 0.5405
Common discharge side pipe - Plastic / PE100 (HDPE) PE 4710
SDR 17 (PN 10) / DN 200 (250x14,8 mm) / DIN 8074/75 /EN 13244
Pipe length 220.4 450 m 1 2.097 0.01 6.849
Discharge Connection 220.4 0.3 1 2.097 0.06723
Outlet 220.4 1 1 2.097 0.2241
T-piece 220.4 0.4 1 2.097 0.08964
VALVE 220.4 0.3 1 2.097 0.06723
Elbow 45° 220.4 1.08 10 2.097 0.2946
Elbow 90° 220.4 0.678 4 2.097 0.1941
Total friction head 7.786

Friction loss head 8.326 m


Total static head 6m
Total head 14.33 m

Project Created by Last update 6/6/2020


Block AW.ITEMNAME Created on 6/6/2020 Page 1 / 1

You might also like