Generator set data sheet

Model: C66 D5L (B3.3)

Frequency: 50 Hz
Fuel type: Diesel

Spec sheet: S-6282-EN

Noise data sheet (open): MSP-3033
Airflow data sheet: MCP-2029

Standby Prime
Fuel consumption kVA (kW) kVA (kW)
Ratings 66 (53) 60 (48)
Load ¼ 1/2 3/4 Full 1/4 1/2 3/4 Full
US gph 1.2 2.0 3.0 4.1 1.2 1.8 2.7 4.1
L/hr 4.7 7.4 11.4 15.4 4.4 6.9 10.1 13.3

Standby Prime
Engine rating rating
Engine manufacturer Cummins
Engine model 4BTAA3.3-G13
Configuration Inline, 4-Cylinder Diesel
Aspiration Turbocharged and after-cooled
Gross engine power output, kWm 62.6 58
BMEP at set rated load, kPa 1538 1428
Bore, mm 95
Stroke, mm 115
Rated speed, rpm 1500
Piston speed, m/s 5.75
Compression ratio 19:1
Lube oil capacity, L 8
Overspeed limit, rpm 1650
Regenerative power, kW N.A.
Governor type Mechanical as standard
Starting voltage 12V DC

Fuel flow
Maximum fuel flow, L/hr 45
Maximum fuel inlet restriction, mm Hg (clean filter) 101.6
Maximum fuel inlet temperature, °C 70

power.cummins.com
©2016 Cummins Power Generation Inc. | D-6278-EN
Air Standby Rating Prim e Rating

Combustion air, m 3/min 4.64 4.19

Maximum air cleaner restriction, kPa 2.5

Exhaust
Exhaust gas flow at set rated load, m 3/min 10.64 9.76

Exhaust gas temperature, °C 491 483

Maximum exhaust back pressure, kPa 10

Standard set-mounted radiator cooling

Ambient design, °C @ 12.7mm H2O 55

Fan load, KWm 2 +/- 1

Coolant capacity (with radiator), L 10.7

Cooling system air flow, m3/sec @ 12.7mm H2O 1.611

Total heat rejection, BTU/min 1744 1560

Maximum cooling air flow static restriction mm H2O 25.4

Weights* Open Enclosed

Unit dry weight kg (Standard skid) 1019 1423

Unit wet weight kg (Standard skid) 1107 1511

Unit dry weight kg (Optional skid) 1237 1640

Unit wet weight kg (Optional skid) 1325 1728

Dimensions Length Width Height

Open set dimensions (Standard skid) 2050 967 1510

Enclosed set dimensions (Standard skid) 2270 975 1920

Open set dimensions (Optional skid) 2270 967 1720

Enclosed set dimensions (Optional skid) 2270 975 2115

See your distributor for more information.

Cummins Power Generation
Manston Park, Columbus Av enue
Manston, Ramsgate
Kent CT12 5BF, UK
Telephone: +44 (0) 1843 255000
Fax +44 (0) 1843 255902
E-mail: [email protected]
Web: www.cumminspower.com
power.cummins.com

©2016 Cummins Power Generation Inc. All rights reserved.

Cummins Power Generation and Cummins are registered trademarks of Cummins Inc. PowerCommand, AmpSentry, InPower
and “Our energy working for you.” are trademarks of Cummins Power Generation. Other company, product, or service names
may be trademarks or service marks of others. Specifications are subject to change without notice.
D-6278-EN
Genset outline
Open set

Enclosed set

Outlines are f or illustrative purposes only. Please refer to the genset outline drawing for an exact representation of this model.

©2012 | Cummins Power Generation Inc. | All rights reserved | Specifications subject to change without notice | Cummins Power Generation and Cummins are registered trademarks of Cummins Inc.
PowerCommand and “Our energy working for you.” are trademarks of Cummins Power Generation. Other company, product, or service names may be trademarks or service marks of others.
Document no. DS374-CPGK-RevA - 24/2/2012

Alternator data
Connection1 Temp rise °C Duty2 VoltageAlternator

Wy e -3 phase 163/125 S/P UCI22 4F 380-415

Wy e -3 phase 150/105 S/P UCI22 4G 380-415

0 0 0 0

See your distributor for more information.

Cummins Power Generation
Manston Park, Columbus Av enue
Manston, Ramsgate
Kent CT12 5BF, UK
Telephone: +44 (0) 1843 255000
Fax +44 (0) 1843 255902
E-mail: [email protected]
Web: www.cumminspower.com
power.cummins.com

©2016 Cummins Power Generation Inc. All rights reserved.

Cummins Power Generation and Cummins are registered trademarks of Cummins Inc. PowerCommand, AmpSentry, InPower
and “Our energy working for you.” are trademarks of Cummins Power Generation. Other company, product, or service names
may be trademarks or service marks of others. Specifications are subject to change without notice.
D-6278-EN
Ratings definitions
Emergency Standby Limited-Time running Prime Power (PRP) Base Load (Continuous)
Power (ESP) Power (LTP): Power (COP)

Applicable f or supplying power to Applicable f or supplying power to a Applicable f or supplying power to Applicable f or supplying power
v ary ing electrical load for the constant electrical load for limited v ary ing electrical load for unlimited continuously to a constant electrical
duration of power interruption of a hours. Limited Time Running Power hours. Prime Power (PRP) is in load f or unlimited hours. Continuous
reliable utility source. Emergency (LTP) is in accordance with ISO accordance with ISO 8528. Ten Power (COP) in accordance with ISO
Standby Power (ESP) is in 8528. percent ov erload capability is 8528, ISO 3046, AS 2789 and DIN
accordance with ISO 8528. Fuel av ailable in accordance with ISO 6271.
Stop power in accordance with ISO 3046, AS 2789 and DIN 6271.
3046, AS 2789 and DIN 6271.

Formulas for calculating full load currents:

Single phase output

kWxSinglePhaseFactorx1000
Voltage

Three phase output

kWx1000
Voltagex1.73x0.8

See your distributor for more information.

Cummins Power Generation
Manston Park, Columbus Av enue
Manston, Ramsgate
Kent CT12 5BF, UK
Telephone: +44 (0) 1843 255000
Fax +44 (0) 1843 255902
E-mail: [email protected]
Web: www.cumminspower.com
power.cummins.com

©2016 Cummins Power Generation Inc. All rights reserved.

Cummins Power Generation and Cummins are registered trademarks of Cummins Inc. PowerCommand, AmpSentry, InPower
and “Our energy working for you.” are trademarks of Cummins Power Generation. Other company, product, or service names
may be trademarks or service marks of others. Specifications are subject to change without notice.
D-6278-EN