Industry

DVS-016 Series
Unmanaged Industrial 16-Port FE Ethernet
Switches
Ethernet Switches

►► Supports IEEE 802.1p based QoS for packet forwarding precedence

►► Built-in Broadcast Storm Protection
►► Transparent transmission of VLAN tagged packets
►► 12 to 48 VDC redundant terminal block power input
►► Auto warning by relay output for link-down and power failure
►► Compatible with various industrial protocols, including EtherNet/IP,
Profinet, CC-LINK IE and DNP 3.0

Specifications
IEEE 802.11 WLAN

TECHNOLOGY
Standard Compliance Processing Type
• IEEE 802.3 10Base-T • Store and Forward
• IEEE 802.3u 100Base-T(X) and 100Base-FX • IEEE 802.3x flow control in full duplex,
• IEEE 802.3x Flow Control back-pressure flow control in half duplex
• IEEE 802.1p Class of Service, Priority Protocols

INTERFACE
Fast Ethernet LEDs DIP Switches
RJ45 Ports: Per Device: • Port link-down alarm configuration
Alarm Contacts (DO)
IIoT Routers

• 10/100Base-T(X), auto MDI/MDI-X, auto • ALARM, PWR1, PWR2

negotiation Per Port: • 1 relay output
Fiber Optic Ports: • 100M (RJ45 port), 100M (fiber port), LINK/ • Carry current 2A@24VDC
• 100Base-FX (SC connector), MultiMode or ACT
SingleMode

PERFORMANCE AND SCALABILITY

Switching Capacity MAC Address Table Transparent Forwarding VLAN Tagged Packets
• 3.2Gbps, wire-speed, non-blocking • 8K • Default enabled
switching fabric Packet Buffer Memory IEEE 802.1p based QoS
Forwarding Rate • 1M bits • Default enabled
• 4.8Mpps Broadcast Storm Protection
• Default enabled
Ethernet Converters

POWER REQUIREMENTS
Input Voltage Input Current Reverse Polarity Protection
• 2 sets, 12 to 48 VDC redundant terminal • Max. 0.6A • Present
block input Overload Current Protection Buffer Time
• Present, max. input current 3A • Min. 13ms at 24VDC

PHYSICAL
Housing Weight
• IP40 metal case • 490g
Dimensions Installation
• 145.3mm (H) x 75mm (W) x 108.7mm (D) • Industrial DIN-Rail and wall mounting

29
 Industry
ENVIRONMENTAL LIMITS
Operating Temperature Storage Temperature Ambient Relative Humidity
• -40℃ to 75℃ (-40˚F to 167˚F) • 40℃ to 85℃ (-40˚F to 185˚F) • 5% to 95% (non-condensing)

APPROVALS

Ethernet Switches
Safety Environmental Type Tests Freefall:
• UL 508, EN 60950-1, IEC 61131-2 Cold Temperature: • IEC 60068-2-32
• IEC 60068-2-1 Vibration:
EMI
Dry Heat: • IEC 60068-2-6
• FCC 47 CFR Part 15 Subpart B Class B,
• IEC 60068-2-2 Hi-Pot:
IEC 61000-6-4, EN 55022(CISPR22)
Humidity: • 1.5KV
EMS [IEC 61000-6-2, EN 55024(CISPR24)] • IEC 60068-2-30
• IEC 61000-4-2 level 3, IEC 61000-4-3 level 3, Shock:
IEC 61000-4-4 level 4, IEC 61000-4-5 level 3, • IEC 60255-21-2
IEC 61000-4-6 level 3, IEC 61000-4-8 level 4,
IEC 61000-4-29

Fiber Optics

IEEE 802.11 WLAN

100Base-FX
MultiMode SingleMode
Cable 62.5/125μm, 50/125μm 9/125μm
Wavelength 1310nm 1310nm
Max. TX Power -14dBm -8dBm
-20dBm(1)
Min. TX Power -15dBm Note: The actual link distance of a
-22.5dBm(2)
particular fiber optic link depends on the
RX Sensitivity -31dBm -31dBm
optical budget, the number of connectors
11dBm(1) and splices, and cabling quantity. Please
Optical Budget 16dBm
8.5dBm(2) measure and verify the actual link loss
Max. Link Distance 5km 30km values once the link is established to
(1) 62.5/125μm fiber optic cable (2) 50/125μm fiber optic cable identify any potential performance issues.

IIoT Routers
Ordering Information
Product Port Combination Interface

100Base-FX
Operating 10/100 DO Power
Model Name DI
Temperature Base-T(X) SC Connector, SC Connector, (Relay) Input
MultiMode, 5km SingleMode, 30km

DVS-016W01 -40℃ to 75℃ 16 --- --- --- 1 2

Ethernet Converters

DVS-016W01-MC01 -40℃ to 75℃ 15 1 --- --- 1 2

DVS-016W01-SC01 -40℃ to 75℃ 15 --- 1 --- 1 2

Optional Products
DVP/CliQ/PMC Series: 12/24 VDC Industrial Power Supply

30